DR I L L I NG S Y S T E M S

Mud Pumps
High-performance, robust mud pumps for onshore and offshore drilling applications.
 Table of Contents

LEWCO Mud Pumps . . ............................................... 3

LEWCO Mud Pumps Features................................... 4

LEWCO WH-Series Mud Pumps. . ............................... 6

LEWCO W-Series Mud Pumps................................... 8

2
 DR I L L I NG S Y S T E M S

LEWCO Mud Pumps

Cameron manufactures high-performance, robust LEWCO™ mud pumps for onshore and offshore oil
and gas drilling applications. Each mud pump features a one-piece, forged and fabricated alloy steel
crankshaft for smooth operation and enhanced longevity. In addition, LEWCO mud pumps include
a welded steel power frame, forged alloy steel pinions and gears and triple-redundant power end
lubrication. Prior to delivery, LEWCO mud pumps are tested in our quality control facility to verify
performance expectations.

For maximized drilling performance and efficiency, LEWCO mud pumps offer high discharge flow rates,
impressive power-to-weight ratios and small footprints. Cameron can also furnish fluid end modules
to match the customer’s existing inventory. Cameron takes pride in their ability to provide integrated
pump packages, including top or rear mount AC or DC electric drives, controls, manifolds, piping and
accessories. Pumps are installed on a heavy-duty skid or trailer mounted for portability.

3
 LEWCO Mud Pumps Features

One-Piece Forged and Fabricated Alloy Steel Crankshaft

The power balanced crankshaft reduces noise and vibration and extends the life of
the bearing and crankshaft life. Rather than using a multipiece bolted component,
the LEWCO crankshaft is made of one-piece, forged and fabricated alloy steel
construction. It is repairable to help reduce operating expense and its bearings are
lubricated via drilled internal passageways for longevity.

Welded Steel Power Frame

The mud pump power frame is engineered for performance, reliability and toughness.
Designed for discharge pressures as high as 7500 psi, it is an independent,
precision-fabricated structure of double-wall welded steel, with stiffeners and gussets
for added strength and durability. As opposed to pumps mounted on an integral skid,
LEWCO mud pumps come mounted on a heavy-duty oilfield skid for mobility and
increased alignment capability, reducing component wear caused by internal stresses.

Triple-Redundant Power End Lubrication

The LEWCO triple-redundant, filtered lubrication system includes internal
gravity/splash plus internal/external force-feeding of most of its power end bearings
and upper/lower crosshead slides. For protection even at low operating speeds, the
system includes a gear-driven mechanical pump off the main gear and a second
pump driven by an electric motor.

Fluid End Modules

LEWCO fluid end modules are available in one or two-piece configurations using
quenched and tempered forged steel material. Cameron can furnish fluid end
modules compatible with various mud pump brands already in use, eliminating the
need to stock extra spares. Fluid end expendables are off-the-shelf parts, readily
available from domestic and international Cameron facilities, further minimizing the
need for additional stocking.

4
 DR I L L I NG S Y S T E M S

Forged Alloy Steel Pinions and Gears

Double helix, or herringbone, gear sets provide impressive load transmission and
quiet operation, while heat treatment enhances strength and durability.

Steel Connecting Rods

The LEWCO rolled plate, low-carbon steel connecting rods maintain precise
alignment between the crankshaft and crosshead under maximum load. These rods
feature double-row cylindrical roller bearings in the crosshead end and single row
cylindrical bearings in the crankshaft end, reducing wear and friction under severe
operating conditions.

Discharge Manifold and Cross

Made of forged, heat-treated steel for ruggedness, LEWCO discharge manifolds are
designed to provide reliable connections and easy module maintenance. The pieces
are available in working pressures of 3000, 5000 and 7500 psi and in various flange
outlet configurations with clean-out strainers. On LEWCO pumps, the single-piece,
trepanned manifold mounts directly to the front or back of the fluid ends, which
eliminates connections between the discharge modules.

Threaded Cylinder Heads and Valve Covers

Threaded cylinder heads and valve covers provide quick and easy access to valves
and liners.

Super Nuts on Main Bearing Cap

Used in lieu of hex nuts, super nuts eliminate the need for special tools that are not
commonly available on drilling rigs.

5
 LEWCO WH-Series Mud Pumps

Smaller Footprints. More Horsepower.

WH-Series: 1300 to 2000 hp rating

Developed for increased mobility, the WH-Series mud pumps deliver high performance in a compact design.
Featuring small footprints and less weight, these pumps are ideal for applications where space is limited.
LEWCO mud pumps feature a power balanced, single-piece forged steel crankshaft for smooth operation.

6
 DR I L L I NG S Y S T E M S

WH-1312 Triplex Piston Model – Continuous Duty Performance Data

Stroke, in (mm): 12 (304.8) Gear Ratio: 4.43 Rated hp (kW): 1300 (969) @ 130 Spm
PUMP SPEED (Spm) 130 110 90 70 50 30
MAXIMUM INPUT HP (kW) rating 1
1300 (969) 1100 (820) 900 (671) 700 (522) 500 (373) 300 (224)
MAX VOLUME/
LINER SIZE DISCHARGE STROKE
OUTPUT gal(l)/min2
in (mm) PRESSURE gal (l)
psi (kg/cm2) per revolution
6-3/4 (171.5) 2766 (194.5) 5.577 (21.108) 725 (2744) 613 (2322) 502 (1900) 390 (1478) 279 (1056) 167 (633)
6-1/2 (165.1) 2983 (209.7) 5.171 (19.574) 672 (2545) 569 (2153) 465 (1762) 362 (1370) 259 (979) 155 (587)
6 (152.4) 3501 (246.1) 4.406 (16.678) 573 (2168) 485 (1835) 397 (1501) 308 (1168) 220 (834) 132 (500)
5-1/2 (139.7) 4166 (292.9) 3.703 (14.014) 481 (1822) 407 (1542) 333 (1261) 259 (981) 185 (701) 111 (420)
5 (127.0) 5000 (351.5) 3.060 (11.582) 398 (1506) 337 (1274) 275 (1042) 214 (811) 153 (579) 92 (347)
Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency
1

All specifications are subject to change. Information important to a particular application should be verified by Cameron.

WH-1612 Triplex Piston Model – Continuous Duty Performance Data

Stroke, in (mm): 12 (304.8) Gear Ratio: 4.41 Rated hp (kW): 1600 (1193) @ 120 Spm
PUMP SPEED (Spm) 120 110 100 90 80 70
MAXIMUM INPUT HP (kW) rating 1
1600 (1193) 1467 (1094) 1333 (994) 1200 (895) 1067 (795) 933 (696)
MAX VOLUME/
LINER SIZE DISCHARGE STROKE
OUTPUT gal(l)/min2
in (mm) PRESSURE gal (l)
psi (kg/cm2)3 per revolution
7-1/2 (190.5)4 2987 (210.0) 6.885 (26.060) 826 (3127) 757 (2867) 688 (2606) 620 (2346) 551 (2085) 482 (1824)
7 (177.8) 3429 (241.1) 5.998 (22.701) 720 (2724) 660 (2497) 600 (2270) 540 (2043) 480 (1816) 420 (1589)
6-1/2 (165.1) 3997 (279.6) 5.171 (19.574) 621 (2349) 569 (2153) 517 (1958) 465 (1762) 414 (1566) 362 (1370)
6 (152.4) 4668 (328.2) 4.406 (16.678) 529 (2002) 485 (1835) 441 (1668) 397 (1501) 353 (1334) 308 (1168)
5-1/2 (139.7) 5555 (390.6) 3.703 (14.014) 444 (1682) 407 (1542) 370 (1402) 333 (1261) 296 (1121) 259 (981)
5 (127.0) 6722 (472.6) 3.060 (11.582) 367 (1390) 337 (1274) 306 (1158) 275 (1042) 245 (927) 214 (811)
4-1/2 (114.3) 7500 (527.3) 2.479 (9.381) 297 (1126) 273 (1032) 248 (938) 223 (844) 198 (751) 174 (657)
1
Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Pressures greater than 5000 psi require high-pressure fluid ends
4
Liner is induction-hardened, therefore liner life is reduced
All specifications are subject to change. Information important to a particular application should be verified by Cameron.

WH-2012 Triplex Piston Model – Continuous Duty Performance Data

Stroke, in (mm): 12 (304.8) Gear Ratio: 4.41 Rated hp (kW): 2000 (1491) @ 140 Spm
PUMP SPEED (Spm) 140 130 120 110 100 90
MAXIMUM INPUT HP (kW) rating1 2000 (1491) 1857 (1385) 1714 (1278) 1571 (1172) 1429 (1065) 1286 (959)
MAX VOLUME/
LINER SIZE DISCHARGE STROKE
OUTPUT gal(l)/min2
in (mm) PRESSURE gal (l)
psi (kg/cm2)3 per revolution
7-1/2 (190.5)4 3201 (225.0) 6.885 (26.060) 964 (3649) 895 (3388) 826 (3127) 757 (2867) 688 (2606) 620 (2346)
7 (177.8) 3674 (258.3) 5.998 (22.701) 840 (3178) 780 (2951) 720 (2724) 660 (2497) 600 (2270) 540 (2043)
6-1/2 (165.1) 4261 (299.6) 5.171 (19.574) 724 (2741) 672 (2545) 621 (2349) 569 (2153) 517 (1958) 465 (1762)
6 (152.4) 5001 (351.6) 4.406 (16.678) 617 (2335) 573 (2168) 529 (2002) 485 (1835) 441 (1668) 397 (1501)
5-1/2 (139.7) 5952 (418.5) 3.703 (14.014) 518 (1962) 481 (1822) 444 (1682) 407 (1542) 370 (1402) 333 (1261)
5 (127.0) 7202 (506.3) 3.060 (11.582) 428 (1622) 398 (1506) 367 (1390) 337 (1274) 306 (1158) 275 (1042)
4-1/2 (114.3) 7500 (527.3) 2.479 (9.381) 347 (1314) 322 (1220) 297 (1126) 273 (1032) 248 (938) 223 (844)
1
Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Pressures greater than 5000 psi require high-pressure fluid ends
4
Liner is induction-hardened, therefore liner life is reduced
All specifications are subject to change. Information important to a particular application should be verified by Cameron.

7
 LEWCO W-Series Mud Pumps

Built Strong to Last Long.

W-Series: 1700 to 3000 hp rating

LEWCO W-Series mud pumps are built for durability, longevity and are designed with a welded power steel
frame that features supplementary steel for operational efficiency. The W-Series line includes robust, high
pressure, low maintenance pumps to increase drilling performance. LEWCO mud pumps feature a power
balanced, single-piece forged and fabricated alloy steel crankshaft for smooth operation.

8
 DR I L L I NG S Y S T E M S

W-1712 Triplex Piston Model – Continuous Duty Performance Data

Stroke, in (mm): 12 (304.8) Gear Ratio: 4.84 Rated hp (kW): 1700 (1268) @ 120 Spm
PUMP SPEED (Spm) 120 110 100 90 80 70
MAXIMUM INPUT HP (kW) rating1 1700 (1268) 1558 (1162) 1417 (1056) 1275 (951) 1133 (845) 992 (739)
MAX VOLUME/
LINER SIZE DISCHARGE STROKE
OUTPUT gal(l)/min2
in (mm) PRESSURE gal (l)
psi (kg/cm2)3 per revolution
7-1/2 (190.5)4 3174 (223.2) 6.885 (26.060) 826 (3127) 757 (2867) 688 (2606) 620 (2346) 551 (2085) 482 (1824)
7 (177.8) 3644 (256.2) 5.998 (22.701) 720 (2724) 660 (2497) 600 (2270) 540 (2043) 480 (1816) 420 (1589)
6-1/2 (165.1) 4226 (297.1) 5.171 (19.574) 621 (2349) 569 (2153) 517 (1958) 465 (1762) 414 (1566) 362 (1370)
6 (152.4) 4960 (348.7) 4.406 (16.678) 529 (2002) 485 (1835) 441 (1668) 397 (1501) 353 (1334) 308 (1168)
5-1/2 (139.7) 5902 (415.0) 3.703 (14.014) 444 (1682) 407 (1542) 370 (1402) 333 (1261) 296 (1121) 259 (981)
5 (127.0) 7142 (502.1) 3.060 (11.582) 367 (1390) 337 (1274) 306 (1158) 275 (1042) 245 (927) 214 (811)
4-1/2 (114.3) 7500 (527.3) 2.479 (9.381) 297 (1126) 273 (1032) 248 (938) 223 (844) 198 (751) 174 (657)
1
Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Pressures greater than 5000 psi require high-pressure fluid ends
4
Liner is induction-hardened, therefore liner life is reduced
All specifications are subject to change. Information important to a particular application should be verified by Cameron.

W-1714 Triplex Piston Model – Continuous Duty Performance Data

Stroke, in (mm): 14 (355.6) Gear Ratio: 4.84 Rated hp (kW): 1700 (1268) @ 110 Spm
PUMP SPEED (Spm) 110 100 90 80 70 60
MAXIMUM INPUT HP (kW) rating 1
1700 (1268) 1545 (1152) 1391 (1037) 1236 (922) 1082 (807) 927 (691)
MAX VOLUME/
LINER SIZE DISCHARGE STROKE
OUTPUT gal(l)/min2
in (mm) PRESSURE gal (l)
psi (kg/cm2)3 per revolution
7-1/2 (190.5)4 2968 (208.7) 8.032 (30.403) 884 (3345) 803 (3041) 723 (2737) 643 (2432) 562 (2128) 482 (1824)
7 (177.8) 3407 (239.5) 6.997 (26.484) 770 (2914) 700 (2649) 630 (2384) 560 (2119) 490 (1854) 420 (1589)
6-1/2 (165.1) 3951 (277.8) 6.033 (22.836) 664 (2512) 603 (2284) 543 (2055) 483 (1827) 422 (1599) 362 (1370)
6 (152.4) 4637 (326.0) 5.141 (19.458) 565 (2141) 514 (1946) 463 (1751) 411 (1557) 360 (1362) 308 (1168)
5-1/2 (139.7) 5519 (388.0) 4.320 (16.350) 475 (1799) 432 (1635) 389 (1472) 346 (1308) 302 (1145) 259 (981)
5 (127.0) 6678 (469.5) 3.570 (13.512) 393 (1486) 357 (1351) 321 (1216) 286 (1081) 250 (946) 214 (811)
4-1/2 (114.3) 7500 (527.3) 2.892 (10.945) 318 (1204) 289 (1095) 260 (985) 231 (876) 202 (766) 174 (657)
1
Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Pressures greater than 5000 psi require high-pressure fluid ends
4
Liner is induction-hardened, therefore liner life is reduced
All specifications are subject to change. Information important to a particular application should be verified by Cameron.

9
 LEWCO W-Series Mud Pumps

W-2214 Triplex Piston Model – Continuous Duty Performance Data

Stroke, in (mm): 14 (355.6) Gear Ratio: 4.82 Rated hp (kW): 2200 (1641) @ 110 Spm
PUMP SPEED (Spm) 110 100 90 80 70 60
MAXIMUM INPUT HP (kW) rating1 2200 (1641) 2000 (1491) 1800 (1342) 1600 (1193) 1400 (1044) 1200 (895)
MAX VOLUME/
LINER SIZE DISCHARGE STROKE
OUTPUT gal(l)/min2
in (mm) PRESSURE gal (l)
psi (kg/cm2)3 per revolution
9 (228.6)3 2667 (187.5) 11.567 (43.780) 1272 (4816) 1157 (4378) 1041 (3941) 925 (3503) 810 (3065) 694 (2627)
8-1/2 (215.9)3 2990 (210.2) 10.317 (39.051) 1135 (4296) 1032 (3905) 929 (3515) 825 (3124) 722 (2734) 619 (2343)
8 (203.2) 3376 (237.3) 9.139 (34.592) 1005 (3805) 914 (3459) 823 (3114) 731 (2768) 640 (2422) 548 (2076)
7-1/2 (190.5) 3841 (270.0) 8.032 (30.403) 884 (3345) 803 (3041) 723 (2737) 643 (2432) 562 (2128) 482 (1824)
7 (177.8) 4409 (310.0) 6.997 (26.484) 770 (2914) 700 (2649) 630 (2384) 560 (2119) 490 (1854) 420 (1589)
6-1/2 (165.1) 5114 (359.5) 6.033 (22.837) 664 (2513) 603 (2283) 543 (2055) 483 (1828) 422 (1597) 362 (1370)
6 (152.4) 6001 (421.9) 5.141 (19.460) 565 (2139) 514 (1948) 463 (1753) 411 (1556) 360 (1363) 308 (1166)
5-1/2 (139.7) 7142 (502.1) 4.320 (16.353) 475 (1798) 432 (1635) 389 (1472) 346 (1310) 302 (1143) 259 (980)
5 (127.0) 7500 (527.3) 3.570 (13.510) 393 (1487) 357 (1351) 321 (1215) 286 (1083) 250 (946) 214 (810)
Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Requires special retention system; liner is induction-hardened, therefore liner life is reduced
1

All specifications are subject to change. Information important to a particular application should be verified by Cameron.

W-2215 Triplex Piston Model – Continuous Duty Performance Data

Stroke, in (mm): 15 (381.0) Gear Ratio: 4.82 Rated hp (kW): 2200 (1641) @ 110 Spm
PUMP SPEED (Spm) 110 100 90 80 70 60
MAXIMUM INPUT HP (kW) rating 1
2200 (1641) 2000 (1491) 1800 (1342) 1600 (1193) 1400 (1044) 1200 (895)
MAX VOLUME/
LINER SIZE DISCHARGE STROKE
OUTPUT gal(l)/min2
in (mm) PRESSURE gal (l)
psi (kg/cm2)3 per revolution
9 (228.6)3 2489 (175.0) 12.393 (46.907) 1363 (5160) 1239 (4691) 1115 (4222) 991 (3753) 868 (3284) 744 (2815)
8-1/2 (215.9)3 2791 (196.2) 11.054 (41.840) 1216 (4603) 1105 (4184) 995 (3766) 884 (3348) 774 (2929) 663 (2511)
8 (203.2) 3151 (221.5) 9.792 (37.063) 1077 (4077) 979 (3707) 881 (3336) 783 (2965) 685 (2595) 588 (2224)
7-1/2 (190.5) 3585 (252.0) 8.606 (32.575) 947 (3584) 861 (3258) 775 (2932) 688 (2606) 602 (2280) 516 (1955)
7 (177.8) 4115 (289.3) 7.497 (28.376) 825 (3122) 750 (2838) 675 (2554) 600 (2270) 525 (1986) 450 (1703)
6-1/2 (165.1) 4773 (335.6) 6.464 (24.467) 711 (2692) 646 (2447) 582 (2202) 517 (1958) 452 (1713) 388 (1468)
6 (152.4) 5601 (393.8) 5.508 (20.848) 606 (2293) 551 (2085) 496 (1876) 441 (1668) 386 (1459) 330 (1251)
5-1/2 (139.7) 6666 (468.7) 4.628 (17.518) 509 (1927) 463 (1752) 417 (1577) 370 (1402) 324 (1226) 278 (1051)
5 (127.0) 7500 (527.3) 3.825 (14.478) 421 (1593) 382 (1448) 344 (1303) 306 (1158) 268 (1014) 229 (869)
Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Requires special retention system; liner is induction-hardened, therefore liner life is reduced
1

All specifications are subject to change. Information important to a particular application should be verified by Cameron.

10
 DR I L L I NG S Y S T E M S

W-3000 Triplex Piston Model – Continuous Duty Performance Data

Stroke, in (mm): 16 (406.4) Gear Ratio: 4.36 Rated hp (kW): 3000 (2237) @ 100 Spm
PUMP SPEED (Spm) 100 90 80 70 60 50
MAXIMUM INPUT HP (kW) rating1 3000 (2237) 2700 (2013) 2400 (1790) 2100 (1566) 1800 (1342) 1500 (1119)
MAX VOLUME/
LINER SIZE DISCHARGE STROKE
OUTPUT gal(l)/min2
in (mm) PRESSURE gal (l)
psi (kg/cm2)3 per revolution
9 (228.6)3 3501 (246.1) 13.219 (50.035) 1322 (5004) 1190 (4504) 1058 (4003) 925 (3503) 793 (3002) 661 (2502)
8-1/2 (215.9) 3925 (275.9) 11.791 (44.630) 1179 (4463) 1061 (4017) 943 (3571) 825 (3124) 707 (2678) 590 (2232)
8 (203.2) 4431 (311.5) 10.445 (39.533) 1044 (3954) 940 (3558) 836 (3163) 731 (2768) 627 (2372) 522 (1977)
7-1/2 (190.5) 5041 (354.4) 9.180 (34.746) 918 (3475) 826 (3127) 734 (2780) 643 (2432) 551 (2085) 459 (1737)
7 (177.8) 5787 (406.9) 7.997 (30.268) 800 (3027) 720 (2724) 640 (2422) 560 (2119) 480 (1816) 400 (1514)
6-1/2 (165.1) 6712 (471.9) 6.895 (26.098) 690 (2610) 621 (2349) 552 (2088) 483 (1827) 414 (1566) 345 (1305)
6 (152.4) 7500 (527.3) 5.875 (22.238) 588 (2224) 529 (2002) 470 (1779) 411 (1557) 353 (1334) 294 (1112)
Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Requires special retention system; liner is induction-hardened, therefore liner life is reduced
1

All specifications are subject to change. Information important to a particular application should be verified by Cameron.

11
Call Center
Tel 1.832.782.6742

6401 W. Sam Houston Pkwy. N.

Houston, TX 77041
USA
Tel 1.713.983.4700

45 Tuas View Close

Trade Link Place
Singapore 637476
Republic of Singapore
Tel 65.6863.1970

Rua da Assembléia, 98/10°, 11º, 19°, 20°, 21° andares

Centro CEP, Rio de Janeiro
20011-000, RJ
Brazil
Tel 55.21.2172.9650

PO Box 18456, RA-08, Blue Shed JA 05 & 06

Jebel Ali, Dubai
UAE
Tel 971.4.8880250

Learn more about Cameron at:

www.c-a-m.com

HSE Policy Statement

At Cameron, we are committed ethically, financially and personally
to a working environment where no one gets hurt, nothing gets harmed.

©2012 Cameron | LEWCO is a trademark of Cameron. | 07/12 AD00177DRL