Technical data sheet

100075525
Spraymec 8100 VC 19.11.2014

USA & Canada

Equipment includes options and extra equipment.

Features
Spraymec 8100 VC is an electro-hydraulic self-propelled mobile concrete sprayer which optimizes concrete spraying
in tunnel projects with variable tunnel cross-sections. It provides efficient spraying from one set-up in tunnels of up
to 10.3 m in height and 16 m in width. The maximum vertical spraying reach is 14 m. The compact design enables the
mobile sprayer to perform spraying in tunnels with cross-sections from 15 - 140 m2.
The Spraymec 8100 VC is designed for high performance sprayed concrete applications and the use of alkali-free
accelerators. It features the latest state-of-the-art control system of the spraying process, the NorSmart. The
NorSmart concrete sprayer control system provides efficient, productive and high-quality concrete spraying with
functions like:
• Low-pulsation concrete spraying and pumping
• Accurate and reliable accelerator dosing (accelerator dosing integrated into concrete output)
• Accurate and fast spray boom and nozzle movements and positioning
• Real-time control and diagnostics of the spraying process including optional kit for accelerator, concrete and
ambient
• temperature control
• Logging of all spraying process-related data and USB data transfer
• Comprehensive vehicle fault diagnostics
The Normet concrete spraying pump NSP 40 has a theoretical maximum pumping capacity of 40 m3/h when the cast-
ing option is selected. The standard pumping capacity for spraying operations is 30 m3/h. The concrete pipe support
arm at the forepart of the concrete pipeline makes cleaning of the concrete line easy and fast after each shift. The
work can now be completely carried out by one operator as the strong mechanical arm makes the presence of an
assisstant
unnecessary. The upper part of the concrete hopper can be turned away for easy service of the concrete cylinders.
Spraymec 8100 VC has an onboard compressor with capacity of 10m3/min for efficient and high quality sprayed
concrete application. Four-wheel drive and four-wheel steering makes the Spraymec 8100 VC easy to manoeuvre in
demanding driving conditions and limited tunnel spaces.
The innovative layout of the Spraymec 8100 VC features genuinely easy access to all service points on the machine.
With the new layout 1 x 1000 litre accelerator tank, a 400 litre water tank and a large tool and storage box or alterna-
tively 2 x 1000 litre accelerator tanks together with other options can easily be placed on the vehicle.
Normet reserves the right to change this specification without further notice.
Normet Oy 1/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND [email protected] www.normet.com
 Technical data sheet
100075525
Spraymec 8100 VC 19.11.2014

USA & Canada

Technical specification

SPRAYBOOM SB 508 D ACCELERATOR SYSTEM

Automatic functions: Hydraulically driven Mono pump
• Vertical and horizontal stabilization Max. pumping pressure 12 bar
• Nozzle rotation Dosing rate 0.5...16 L / min (30 – 960 L / h)
• Telescopic stroke (upper boom) Accelerator flow fully synchronized with the concrete output
Upper boom telescope protected with heavy duty wear resis- Suction line diameter 2" (50 mm)
tant cover Pressure line diameter 1" (25 mm)
The speed of the movements can be adjusted from the cabin Movable operator display
display Possibility of using 2 x 1000 L intermediate bulk
All the movements are pressure compensated and have a containers (IBC)
proportional output
Boom coverage: CONCRETE LINE
• Lateral 16 m Concrete line diameter 76 mm
• Vertical max 14.0 m
• Vertical normal 10.3 m CONTROL SYSTEM
Integrated, seamless NorSmart control and disgnostic sys-
CONCRETE PUMP tem. NorSmart controls:
Spray pump NSP 40 • Spray boom
Low-wear and low-maintenance double piston pump: • Concrete pump
• Pumping capacity theoretical 3 - 30 m3 / h • Accelerator dosing system
• Pumping cylinder diameter 200 mm • Carrier functions
• Cylinder stroke 920 mm • Safety requirements
• Pumping pressure max. 51 bar • Fault diagnostics
• Hydraulic pressure max. 250 bar • Data logging
High pumping pressure enables the conveying of stiff con-
crete DRIVER’S COMPARTMENT
The pump is able to pump up to max. aggregate size of 16 Open 1-man canopy. FOPS  /  ROPS approved
mm (including crushed) and all types of fibres (max. length Suspended driver’s seat
60 mm) in the mix Seat with retractable (75 mm wide) lap seat belt
Sophisticated control system (hydraulic and electric The driver’s compartment with driving controls and
systems) provides low pulsation concrete flow pedals, including multi-informational colour display
Hydraulically driven agitator
WATER REEL
COMPRESSOR Manually operated reel
Electrically operated screw compressor • Hose length 30 m
FAD 10 m³ at 7 bar • Hose size 3 / 4” (19 mm)
Electric motor 55 kW
HIGH PRESSURE WATER WASHER
REMOTE CONTROL SYSTEM Hydraulically operated pressure washer with hose reel:
Operator's cable-connected control box with 2 joysticks. Fol- • Max. water pressure 180 bar
lowing features can be adjusted or switched on / off from the • Max water flow 30 L/min
control box: • Hose length 30 m
• Accelerator dosing rate
• Accelerator pump on / off ENGINE
• Concrete pumping speed Liquid cooled turbo-charged Deutz TCD 2011 L4,
• Concrete pump on / off / reverse 74.9 kW / 2600 rpm, TIER 3 approved
• Air flow to nozzle on / off and air rate in three steps
• Nozzle quick wash on / off EXHAUST SYSTEM
• Wall washing on / off
Catalytic exhaust gas purifier and muffler
• Automatic horizontal levelling on / off
• Automatic second telescope zoom in / out on / off TRANSMISSION
• Nozzle rotation on / off
Hydrostatic 4-wheel transmission
Pump 78 cm3
Motor 110 cm3
Separate oil tank 90 L stainless steel
Return oil filtration 10 μm
Oil level and return filter contamination indication

Normet reserves the right to change this specification without further notice.
Normet Oy 2/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND [email protected] www.normet.com
 Technical data sheet
100075525
Spraymec 8100 VC 19.11.2014

USA & Canada

Technical specification

AXLES HIGH VOLTAGE ELECTRICS

Planetary type 460 V, 60 Hz. Cable type 3 x 95 mm² + 3 x 16 mm²
Dana 602 / 212, 212 hy Cable length 100 m
Boom end axle fixed See options for other available systems
Rear end axle oscillation + / - 10° with automatic
oscillation lock CABLE REEL
Power supply for the electrical functions
TYRES Max. cable diameter / length 3 x 95 mm² + ground / 100 m
10.00 – 20 EM 23 Hydraulically driven
Cable in / out reeling function from the canopy and near the
PERFORMANCE reel
Max. tractive force 62 kN
Max. speed (horizontal tunnel) 15 km / h WORKING LIGHTS
Performance curve 100018270 24 VDC LED lights
• 8 pcs in the SB 508 Boom
BRAKES • 2 pcs on canopy roof
Service brake: hydraulically powered two-circuit
oil-immersed multi-disc brakes in both axles GREASING SYSTEM
Safety / Parking brake: spring-activated, hydraulically re- Centralized grease fittings for:
leased, fail-safe-type brake. Brake test possibility in cabin • Carrier
• Concrete pump
Automatic Brake Application (ABA) • Sprayboom
STEERING OTHER
Four-wheel steering as standard 9 kg hand-held fire extinguisher
Orbitrol type Standard symbol labels
Including crabwalk Basic tool set:
• Cleaning plug
FUEL TANK
• Washing ball
Capacity 85 L. Stainless steel • Hitting tool for nozzle
• Claw coupling
HYDRAULIC SYSTEM • Hose clamp
Electro-hydraulic power pack 55 kW / 60 Hz / 1800 rpm • Rubber hose 3/4" 4 m
Variable displacement piston pump systems with • Carabiner
following outputs: • Wrench for spraymec nozzles
• 115 L / min for concrete pump (piston type) • Sledgehammer 800g
• 110 L / min for boom (piston type) • Nozzle tip d45mm plasttic
• 30 L / min for s-tube change (piston type) • Nozzle tip d45 boron steel
• 24 L / min for agitator and dosing system (gear type) • cone for concrete piston assembly
Hydraulic oil tank capacity 220 L. Stainless steel • special bolt for concrete piston assembly
Oil cooler for concrete and boom circuit
Return oil filtration 10 μm
Oil level and return filter contamination indication

24 VDC ELECTRICAL SYSTEM

Exposed components are min. IP 65 standard
Battery 2 x 115 Ah
Alternator 55 A
Wire harness (self extinguishing) with tinned wires and wa-
tertight conduits
LED driving lights:
• Engine end, 2 pcs
• Rear end, 2 pcs
Rotating beacon; amber
LED parking and brake lights

Normet reserves the right to change this specification without further notice.
Normet Oy 3/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND [email protected] www.normet.com
 Technical data sheet
100075525
Spraymec 8100 VC 19.11.2014

USA & Canada

Optional equipment Additional equipment

CONCRETE PUMP REMOTE CONTROL SYSTEM

Casting pumping: Radio control with 2 joysticks with cable support
Upgrade of max. theoretical concrete pumping capacity up to Radio control with 4 joysticks with cable support
40 m³ / h Radio controls are equipped with the same features as the
Comes with electro hydraulic power pack 55 kW / cable remote.
60 Hz /1800 rpm with following outputs: Standard cable remote control included with additional radio
• 155 L / min for concrete pump (piston type) remote control.
• 85 L / min for boom (piston type)
• 30 L / min for s-tube change (piston type) FOR CONCRETE PUMP
• 24 L / min for agitator and dosing system (gear type) Emptying of concrete pump with diesel engine

REMOTE CONTROL SYSTEM ACCELERATOR SYSTEM

Radio control with 2 joysticks with cable support IBC container 1000 L, 1 or 2 pcs
Radio control with 4 joysticks with cable support Heating element kit for IBC container:
Radio controls are equipped with the same features as the • Easily exchangeable jacket-type heating element
cable remote. • 2 circuits each 1000 W, 110 VAC
When choosing this option, standard cable remote control is • -5 ºC to 40 ºC capillary thermostat per circuit
replaced with radio control. • Includes separate insulator cover part for container
(hole for the filling gap and mixer)
HIGH VOLTAGE ELECTRICAL SYSTEM • Power supply is required for heating and mixing kits if
575 V, 60 Hz. Cable type 3 x 95 mm² + 3 x 16 mm² used during operation
440 V, 60 Hz with 12 m3 compressor. Cable type 3 x 95 Accelerator mixing kit for IBC container:
mm² + 3 x 16 mm² • Electrically-driven mixing device
Cable length 100 m • Electric motor 0.37 kW 110 VAC
Soft start system for compressor • Power supply is required for heating and mixing kits if
Electro-hydraulic power pack 55 kW / 60 Hz /1800 rpm with used during operation
following outputs: Power supply for heating and mixing kits:
• 115 L / min for concrete pump (piston type) • 6,3 kVA 110 V transformer capable of transforming volt-
• 85 L / min for boom (piston type) ages from 400 V to 690 V (covers voltages of
• 30 L / min for s-tube change (piston type) 400, 460, 575, 660, 690 V)
• 24 L / min for agitator and dosing system (gear type) Power supply for heating and mixing kits: 1000V
• 6 pcs 110 V sockets
ACCELERATOR SYSTEM • Allows heating and mixing kits be used during
Normet Lpp-D Peristaltic additive dosing pump operation

CONCRETE LINE CONTROL SYSTEM

Concrete line diameter 125 mm Temperature and air pressure measuring kit:
• Concrete temperature
EXHAUST SYSTEM • Additive temperature
Particle filter (replaces catalytic exhaust gas purifier and • Ambient temperature
muffler) • Nozzle air pressure
Temperature measuring and recording enables the
OTHER concrete spraying conditions to be monitored
Hydraulically operated water reel: FORM OIL SYSTEM
• Hose length 50 m
• Hose size 1” (25 mm) Air pressure-driven system with hose reel:
• Tank capacity 40 L
Must be used with the wall washing system
• Hose length 30 m
Warning lights, 1 unit:
• Working pressure 7 bar
• Rotating beacon; red
• Rotating beacon; blue ROCK WALL WASHING SYSTEM
Hydraulically operated pressure washer:
• Max. water pressure 180 bar
• Max. water flow 90 L / min
• Can only be used when power pack is connected to the
electrical mains
When using this equipment, the vehicle washing is also car-
ried out by this washer. The washing power will
automatically adjust to the correct level.
Hydraulically driven water reel must be selected

Normet reserves the right to change this specification without further notice.
Normet Oy 4/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND [email protected] www.normet.com
 Technical data sheet
100075525
Spraymec 8100 VC 19.11.2014

USA & Canada

Additional equipment LTC services

HOT CLIMATE KIT SPARE PARTS

Additional cooler for compressor internal oil system Spare parts package A: Available for 3000 m3 of pumped
Recommended for ambient temperatures from + 30 ºC up to concrete*. Include periodical service, most
max. + 45 ºC common wearing parts and most critical safety parts
Spare parts package B: Available for 6000 m3 of pumped
OIL CONDITION MONITORING concrete*. Include periodical service, most
Hydraulic oil diagnostic sensor common wearing parts and most critical safety parts
Boom and concrete pump hydraulic oil contamination moni- * Recommendations are based on average
toring and moisture % RH indicator consumption - can vary a lot depending on used
Gives alarm to NorSmart if the setting limits are exceed shotcrete and work site conditions
OIL FILTRATION SYSTEM TRAINING SERVICES
Bypass filter kit Available before delivery, at start up and after delivery
For concrete and boom oil circuit: Product training:
• 0,5 μm filtration, extremely clean oil Operation and Maintenance
• Also absorbs the water from the oil NorSmart
• Longer lifetime for the hydraulic components Foundation of electrics, hydraulics and mechanics
• Reduces cost of ownership Audit
Process training:
FIRE SUPPRESSION SYSTEM
Concrete spraying
Ansul: manually actuated Charging
Ansul: automatically actuated Process audit
GREASING SYSTEM AUDIT SERVICES
Automatic greasing system (Lincoln) for the To improve performance of the machines
concrete pump To improve the performance of your processes
Automatic greasing system (Lincoln) for the carrier and To help improve the quality of maintenance operations
spray boom
SERVICE CONTRACTS
OTHER
Spare parts supply programmes
400 L Stainless steel water tank Scheduled inspection programmes
(When water tank is selected, only one 1000 L accelerator Supervision programmes
container can be used) Periodic maintenance programmes
Large tool and storage box Machine usage programmes
Place for tools and some spare parts
(Only one 1000 L accelerator can be used when this extra LINK ONE
equipment is selected) Link One electronic spare part manuals
Extra hand-held fire extinguisher (9 kg)
Xenon driving lights for reverse direction 2 x 35 W WARRANTY SERVICES
Toolbox and maintenance tools
2 wheel chocks with brackets Extended warranty
Reversing camera
Spare wheel
Text labels in: GB / Fra /Esp 

Normet reserves the right to change this specification without further notice.
Normet Oy 5/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND [email protected] www.normet.com
 Technical data sheet
100075525
Spraymec 8100 VC 19.11.2014

USA & Canada

Dimensions

SIDE VIEW 1
Basic machine. Transportation and driving dimensions,
boom turned on the vehicle. Vehicle width 2500 mm

SIDE AND OVERVIEW 2

Basic machine. Transportation dimensions for container transport.
Upper part of the cabin, concrete line, ladders and upper part of the boom must be removed

Normet reserves the right to change this specification without further notice.
Normet Oy 6/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND [email protected] www.normet.com
 Technical data sheet
100075525
Spraymec 8100 VC 19.11.2014

USA & Canada

Dimensions

SIDE AND OVERVIEW 3

Basic machine. Driving dimensions at job site

TURNING RADIUS

DIMENSIONS TURNING RADIUS

Length 13150 mm Outer 6750 mm
Width 2500 mm Inner 1850 mm
Height 2830 mm
Wheel base 3800 mm WEIGHT
Ground clearance 340 mm Operating 14 500 kg

Normet reserves the right to change this specification without further notice.
Normet Oy 7/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND [email protected] www.normet.com
 Technical data sheet
100075525
Spraymec 8100 VC 19.11.2014

USA & Canada

Dimensions

FRONT AND TOP VIEW

Basic machine. Required space to unfold boom from transport position to working position

Normet reserves the right to change this specification without further notice.
Normet Oy 8/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND [email protected] www.normet.com
 Technical data sheet
100075525
Spraymec 8100 VC 19.11.2014

USA & Canada

COVERAGE AREA OF SPRAY BOOM SB 508

Normet reserves the right to change this specification without further notice.
Normet Oy 9/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND [email protected] www.normet.com
 Technical data sheet
100075525
Spraymec 8100 VC 19.11.2014

USA & Canada

COVERAGE AREA OF SPRAY BOOM SB 508

Normet reserves the right to change this specification without further notice.
Normet Oy 10/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND [email protected] www.normet.com
 Technical data sheet
100075525
Spraymec 8100 VC 19.11.2014

USA & Canada

Tractive force

SPM 5100

70

60

50 TRACTIVE FORCE
Level
40 Slope 1/14 ( 7% )
Slope 1/7 ( 14 % )
kN

30

20

10

0
0,0 5,0 10,0 15,0 20,0
km / h

DEUTZ TCD 2011 L4 74,9 kW WITHOUT ACCELERATOR CONTAINER

Performance curve 100018270

Normet reserves the right to change this specification without further notice.
Normet Oy 11/11 Tel +358 (0) 17 83 241
Ahmolantie 6 Fax +358 (0) 17 823 606
FI-74510 IISALMI, FINLAND [email protected] www.normet.com