24000

C
L OF MEDIAN (PCL) CRASH BARRIER
20mm.
10000 2000 2000 10000
GAP APPROACH SLAB
500 500 1500 7000 500 500 7000 1500 500 500 RCC RAFT(M30) OF
NGL FRL
300

BOX CELL 3500

CRASHBARRIER 65 THK. WEARING KERB FRL 65 THK. WEARING CRASHBARRIER
COAT COAT
D4

FRL 3% 3%
D4

D4
2.5% 2.5% RE WALL
6000(TYP)
600X300
B
D5

Haunch(typ)
3000(min)

3000(min)

(min)
3000
PEPER JOINT 600 THK. FILTER
FOOTPATH

300
(TYP) 1% SLOPE 1% SLOPE 1000 D3 1250 2500 1250 D3 MEDIA (TYP) NGL
40 BC
650

D1
100 THK. PCC(M15) 650 slope slope RAFT TOP
D5

300 THK. COMPACTED SAND 100 THK.

D2
D5
FILL 100 100 RE WALL
500 150 THK. PCC(M15) 300 THK. 500 50 PCC(M25)
COMPACTED SAND FILL 500
PAVEMENT THK OF A DETAIL-A RCC GRATING COVER DBM(at edge PCC(1:3:6)
CROSS ROAD with BC & DBM
(at edge & at crown)
SECTION 1-1 SCALE 1:50 (PRE-CAST) & at crown)
100 THK PCC
SCALE 1:150 (M15)
300 THK. COMPACTED C
SAND FILL
23000
7000 7000 40 BC SECTION 2-2
5001500 MAIN CARRAIGE WAY (LHS) 4000 MAIN CARRAIGE WAY (RHS) 1500500 100 AVG. DBM SCALE 1:100
500 500
2 C
L OF ALIGNMENT WMM
GSB D3 RE WALL
4000 50 THK.
MEDIAN SUBGRADE PCC(M20)
RE WALL RCC RAFT(M30) TAR PAPER BEARING EQ NGL
250 250 (TYP) PCC(1:3:6) EQ
CROSS SECTION(TYP) OF BOX CELL

D1
APPROACH SLAB EQ RAFT TOP
650
OF CROSS ROAD BEYOND

300
GRANULAR- FOOTPATH

D4
600
3500

SOIL FILL (TYP)

NVP-RAFT ON EITHER SIDE

300300
APPROACH SLAB APPROACH SLAB

D2
D5
300
100

300

150
600
300

300
D3

20MM EXP GAP HAUNCH

EQ EQ
600

600x300
L OF BOX

EQ
UNDERPASS

100Ø WEEP HOLE@ 1000C/C 600 THK. FILTER

100 THK. PCC(M15)
1 1 IN STAGGERED WAY FOR MEDIA
5000

SELECTED 300 THK. COMPACTED

C

2.5% SLOPE 2.5% SLOPE BOTH HORIZONTAL &

D3 GRANULAR FILLING SAND FILL
DRAINAGE CRASH BARRIER CRASH BARRIER
VERTICAL DIRECTIONS
OF Ø > 30° DETAIL-C
SPOUT
DETAIL-B SCALE-1:50
600

20MM EXP GAP

D3

SCALE-1:50
300

3500
GRANULAR-
APPROACH SLAB APPROACH SLAB
SOIL FILL
NOTES
1. ALL DIMENSION ARE IN MILIMETERS, LEVELS ARE IN METRE AND 8. LOWEST BED LEVEL SHALL BE VERIFIED PRIOR TO
4000 CHAINAGES ARE IN KM UNLESS OTHERWISE MENTIONED. ONLY COMMENCEMENT OF CONSTRUCTION. VARIATION (IF ANY) SHALL
MEDIAN WRITTEN DIMENSION SHALL BE FOLLOWED. DRAWING SHALL NOT BE BE REPORTED TO THE ENGINEER FOR MODIFICATION OF
SCALED. STRUCTURE.
9. PROVIDE 100 Ø WEEP HOLES & 600 THK
2 2. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH ALL OTHER
RELEVANT DRAWINGS.
FILTER MEDIA @ 1 HOLE PER SQM. AREA, INCASE HT. OF
BOX/U-TROUGH IS MORE THAN 2.5M.
PLAN 3. GRADE OF CONCRETE FOR VARIOUS STRUCTURES SHALL BE AS LEGEND :-
FOLLOWES : I) PCL - PROPOSED CENTRE LINE
SCALE-1:100 BOX CELL STRUCTURES--------------------------------M30 II) FRL - FINISHED ROAD LEVEL
APPROACH SLAB------------------------------------------M30 III) FL - FOUNDING LEVEL
PCC LEAN CONCRETE BELOW FOUNDATION---M15
4. ALL REINFORCEMENTS SHALL BE OF THERMO MECHANICALLY
LIST OF NON VEHICULAR UNDERPASSES TREATED (TMT) OR HIGH YIELD STRENGTH DEFORMED BARS (GRADE
DESIGNATION Fe-500). CONFORMING TO IS : 1786-1985.
FRL
SL. PROJECT CROSS (to see D2
TYPE D1 D3 D4 D5
NO. CHAINAGE SLOPE note 10) (min) 5. THE SELECTED EARTH FILLING SHALL HAVE FOLLOWING PROPERTIES
: Ø > = 30°, c = 0, ɣd =18kN/m³
1 NON VEHICULAR UNDERPASS 10+304 2.5% 34.665 600 1200 500 500 500
2 NON VEHICULAR UNDERPASS 18+318 2.5% 34.458 600 1200 500 500 500 6. BACKFILLING BEHIND BOTH END WALLS AND ON BOTH SIDES OF
CURTAIN WALL SHALL BE DONE SIMULTANEOUSLY.
7. THE SAFE BEARING CAPACITY CONSIDERED IN DESIGN IS 10T/sq.m.
EARTH SHALL BE COMPACTED TO PROCTOR DENSITY 95% TO
ENHANCE THE BEARING CAPACITY OF FOUNDATION STRATA.