I Corr Inspector Exam Sample Questions Level 2

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

ICorr Inspector Exam Sample Questions

Level 2

Essay Questions

1. Explain how to correctly use and set up a P.I.G. gauge?


2. Describe the 3 types of coating failure whet conduction coating adhesion testing and
at what time after application can this be conducted?
3. What are the 5 steps to developing a risk assessment?
4. Name 2 types of assessment for soluble and how they are conducted
5. What is an Electrolyte and give 3 examples?
6. If a coating has a volume solids of 85% and you have to coat 1500 square meters to
a dft of 150 microns, how much paint will be required assuming a loss factor of 25%?
(Show workings)

Multiple Choice Questions

Coatings are semi-________ membranes?


Conductive
Hard
Permeable
Soft

The main biocides are ________oxides and thiocyanates?


Cuprous
Aluminium
Zinc
Cupric

The principle role of the inspector is to assist in obtaining a ________


________ paint job?
Defect free
Excellent quality
Half decent
Good quality

What are the potential problems when applying an amine cured epoxy coating
during high humidity?
Cheesiness
Bloom
Chalking
Cissing

You might also like