Scribd Logo
Upload

Welcome to Scribd!

  • 72 views

    74F14 Hex Inverter Schmitt Trigger: General Description

    Uploaded by

    Carlos Posada
    74F14 Fairchild

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    74F14 Hex Inverter Schmitt Trigger: General Description

    Uploaded by

    Carlos Posada
    72 views4 pages
    74F14 Fairchild

    Original Title

    74F14 Fairchild

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    74F14 Fairchild

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    72 views4 pages

    74F14 Hex Inverter Schmitt Trigger: General Description

    Uploaded by

    Carlos Posada
    74F14 Fairchild

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    74F14 Hex Inverter Schmitt Trigger

    March 1988
    Revised July 1999

    74F14
    Hex Inverter Schmitt Trigger
    General Description totem-pole output. The Schmitt trigger uses positive feed
    back to effectively speed-up slow input transition, and pro-
    The 74F14 contains six logic inverters which accept stan- vide different input threshold voltages for positive and neg-
    dard TTL input signals and provide standard TTL output ative-going transitions. This hysteresis between the
    levels. They are capable of transforming slowly changing positive-going and negative-going input thresholds (typi-
    input signals into sharply defined, jitter-free output signals. cally 800 mV) is determined internally by resistor ratios and
    In addition, they have a greater noise margin than conven- is essentially insensitive to temperature and supply voltage
    tional inverters. variations.
    Each circuit contains a Schmitt trigger followed by a Dar-
    lington level shifter and a phase splitter driving a TTL

    Ordering Code:
    Order Number Package Number Package Description
    74F14SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow
    74F14SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
    74F14PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide
    Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

    Logic Symbol Connection Diagram


    IEEE/IEC

    Unit Loading/Fan Out Function Table


    Input Output
    U.L. Input IIH/IIL
    Pin Names Description A O
    HIGH/LOW Output IOH/IOL
    L H
    In Input 1.0/1.0 20 µA/−0.6 mA
    H L
    On Output 50/33.3 −1 mA/20 mA H = HIGH Voltage Level
    L = LOW Voltage Level

    © 1999 Fairchild Semiconductor Corporation DS009461 www.fairchildsemi.com


    74F14
    Absolute Maximum Ratings(Note 1) Recommended Operating
    Storage Temperature −65°C to +150°C Conditions
    Ambient Temperature under Bias −55°C to +125°C Free Air Ambient Temperature 0°C to +70°C
    Junction Temperature under Bias −55°C to +175°C Supply Voltage +4.5V to +5.5V
    VCC Pin Potential to Ground Pin −0.5V to +7.0V
    Input Voltage (Note 2) −0.5V to +7.0V
    Input Current (Note 2) −30 mA to +5.0 mA
    Voltage Applied to Output
    in HIGH State (with VCC = 0V)
    Standard Output −0.5V to VCC Note 1: Absolute maximum ratings are values beyond which the device
    may be damaged or have its useful life impaired. Functional operation
    3-STATE Output −0.5V to +5.5V under these conditions is not implied.
    Current Applied to Output Note 2: Either voltage limit or current limit is sufficient to protect inputs.
    in LOW State (Max) twice the rated IOL (mA)
    ESD Last Passing Voltage (Min) 4000V

    DC Electrical Characteristics
    Symbol Parameter Min Typ Max Units VCC Conditions

    VT+ Positive-Going Threshold 1.5 1.7 2.0 V 5.0V


    VT− Negative-Going Threshold 0.7 0.9 1.1 V 5.0V
    ∆VT Hysteresis (VT+–VT−) 0.4 0.8 V 5.0V
    VCD Input Clamp Diode Voltage −1.2 V Min IIN = −18 mA
    VOH Output HIGH 10% VCC 2.5 IOH = −1 mA
    V Min
    Voltage 5% VCC 2.7 IOH = −1 mA
    VOL Output LOW 10% VCC
    0.5 V Min IOL = 20 mA
    Voltage
    IIH Input HIGH
    5.0 µA Max VIN = 2.7V
    Current
    IBVI Input HIGH Current
    7.0 µA Max VIN = 7.0V
    Breakdown Test
    ICEX Output HIGH
    50 µA Max VOUT = VCC
    Leakage Current
    VID Input Leakage IID = 1.9 µA
    4.75 V Max
    Test All Other Pins Grounded
    IOD Output Leakage VIOD = 150 mV
    3.75 µA 0.0
    Circuit Current All Other Pins Grounded
    IIL Input LOW Current −0.6 mA Max VIN = 0.5V
    IOS Output Short-Circuit Current −60 −150 mA Max VOUT = 0V
    ICCH Power Supply Current 25 mA Max VO = HIGH
    ICCL Power Supply Current 25 mA Max VO = LOW

    AC Electrical Characteristics
    TA = +25°C TA = −55°C to +125°C TA = 0°C to +70°C
    VCC = +5.0V VCC = +5.0V VCC = +5.0V
    Symbol Parameter Units
    CL = 50 pF CL = 50 pF CL = 50 pF
    Min Max Min Max Min Max
    tPLH Propagation Delay 4.0 10.5 4.0 13.0 4.0 11.5
    ns
    tPHL In→O n
    3.5 8.5 3.5 10.0 3.5 9.0

    www.fairchildsemi.com 2
    74F14
    Physical Dimensions inches (millimeters) unless otherwise noted

    14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow
    Package Number M14A

    14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
    Package Number M14D

    3 www.fairchildsemi.com
    74F14 Hex Inverter Schmitt Trigger
    Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

    14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide


    Package Number N14A

    Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
    Fairchild reserves the right at any time without notice to change said circuitry and specifications.
    LIFE SUPPORT POLICY

    FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
    DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
    SEMICONDUCTOR CORPORATION. As used herein:
    1. Life support devices or systems are devices or systems 2. A critical component in any component of a life support
    which, (a) are intended for surgical implant into the device or system whose failure to perform can be rea-
    body, or (b) support or sustain life, and (c) whose failure sonably expected to cause the failure of the life support
    to perform when properly used in accordance with device or system, or to affect its safety or effectiveness.
    instructions for use provided in the labeling, can be rea-
    sonably expected to result in a significant injury to the www.fairchildsemi.com
    user.

    www.fairchildsemi.com 4

    You might also like