Eqo-Kleen SMP Pds - v2
Eqo-Kleen SMP Pds - v2
Eqo-Kleen SMP Pds - v2
TECHNOLOGY
ODOR
Clear, light yellow liquid
Citrus
Operator Friendly and Environmentally Friendly
DENSITY 8.6 lbs/gal
Sump Cleaner pH OF CONCENTRATE 10.0-10.6
Moderate Duty
pH OF SOLUTION @ 5% 9.4-10.0
EQO-KLEEN SMP is a moderate-duty, mildly alkaline cleaner designed for use in cleaning large
central systems and individual machine tools. This product is specifically designed to be operator SPECIFIC GRAVITY 1.03
friendly and environmentally safer than traditional harsh sump cleaning chemistries. EQO-KLEEN
OPERATING TEMP. Ambient-180°F (82°C)
SMP is formulated without the use of caustics, silicates, phosphates, glycol ethers or alkyl-phenol
RANGE 1
surfactants. It can be used in pressure washing, dip tanks, agi-lifts, spray washers and floor
scrubbers as well as other cleaning applications requiring a moderate-duty, low foam degreaser. FLASH POINT None
EQO-KLEEN SMP is safe to use on all metal surfaces.
FREEZE POINT < 40°F (4.4°C)
Performance Benefits
SOILS REMOVED • Cutting fluids
•O perator friendly due to mild pH and pleasant citrus odor (contains d-limonene)
• Grease
• Excellent corrosion protection helps prevent machine tools from rusting
• Oil
• Low foaming surfactants to prevent pump cavitations and foam-outs
• Drawing compounds
• Low residue formula allows for easy rinsing of machine tool surfaces before recharging sump
• Polishing compounds
with coolant
• Carbon
Recommended Dilutions • Baked on residues
Recirculating coolant systems: 2-4% • Organic materials
Spray washers: 2-4% • Inorganic materials
Automatic floor scrubbers: 2-4%
EQO-KLEEN SMP does not contain as an ingredient:
Dip tanks, agi-lifts: 2-8%
caustics, phosphates or silicates.
Manual cleaning applications: 4-10%
1
Higher temperatures generally provide better cleaning.
Recommended use dilutions are dependent on cleaning method and soil load.
Concentration Control
Use a QualiChem Alkalinity Test Kit (QAT001) or equivalent with 1.0N sulfuric acid. Determine the
number of drops necessary to cause the color change. Multiply the number of drops by the titration
conversion factor below to determine the percent concentration: Drops x Factor = % Concentration.
Titration conversion factor: 0.54
Packaging
EQO-KLEEN SMP is packaged in IBCs, drums and pails.
Disclaimer: Recommendations are for guidance only, and the suitability of a material for a specific application can be
confirmed only when we know the actual service conditions. Continuous development may necessitate changes in
technical data without notice.