Assignment For Chapter 5
Assignment For Chapter 5
Name : ______________________________________________
Class : _______________________
Date : ______________
1 There are 5 groups of aircraft lighting. Name all 5 and give example of lights in these groups.
3 How to prevent the filament in incandescent lamp from being quickly oxidize and burn out?
7 What make the Halogen filament last longer than Incandecent filament?
8 What could be the result would you expect to see on the ohmmeter, if an ohmmeter
connected across
a) an incandescent lamp, and
b) a fluorescent tube?
10 Why use incandescent lamps lighting instead of using more economical type i.e. fluorescent
tubes in the flight deck area?
13 What should be done in the flight deck instrumentation lighting if the aircraft is categorized
as a Instrument Flight Rules (IFR) operation?
14 Give three (3) type of lightings in flight deck and what is the purpose for each type lighting?
15 Describe the integral instrument lighting and list down its limitations?
16 Describe what is a bridge lamp, its advantages and what type of lamp use in bridge lamp?
21
By referring to the wiring above what is the purpose of variable transformer and what is the
electrical element (V, I or R) does it control?
22 How does the intensity/brightness of incandecent lamp can be controlled and what is the
electrical element (V, I or R) does it control?
23 Give five (5) type of lightings in a passenger/cabin area and what are the purpose for each
type?
24 What is the most likely the type of lighting can be found in the passenger/cabin area and why
these are used?
25 Which type of lighting or lamp can have only two level of brightness control (i.e. bright and
dim)?
26 How does the intensity / brightness of lamp is controlled automatically?
28 List down 5 legal requirements as laid down in the ANO for aircraft position lights.
29 What is the implication, if one of navigation light failed to funstion on the certified of
airworthiness (C of A) aircraft?
30 What type of lamps would you expect to be used for the external aircraft lighting?
31 Where are the navigation lights to be located and what are the colors of these lights?
32 What is the purpose of Anti Collision Light and the location of this light. Briefly describe the
operational of this light.
33
The above diagram shows another method of producing a flashing light. What is the
principle or method used for this type?
34 Describe purpose and differences of these two lights i.e. Landing Light and Taxi Light?
36 What is the purpose of floor proximity lightings and name two types for these lightings?
38 Control of the emergency lighting is from the flight deck by a 3 position switch, explain how
this emergency lighting is controlled?
39
In aircraft lighting installation design, which FAA or JAA design requirements need to be
followed for small and large fixed wing aircraft?
(search for FAR or JAR requirement, and state the paragraphs you need to follow)
-END-