Scribd
Upload
210 views

EE171 Process Control

EE171 Process Control is a 3 credit course that provides knowledge of controllers and process elements. The course objectives are to study the characteristics of first and higher order processes, controller modes and tuning methods, and complex control schemes. It also covers control valves, construction, characteristics, and applications. The syllabus includes introduction to process models, control actions, controller settings optimization methods, multi-loop control examples, and final control elements like valves.

Uploaded by

Akhil Kathi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
210 views

EE171 Process Control

EE171 Process Control is a 3 credit course that provides knowledge of controllers and process elements. The course objectives are to study the characteristics of first and higher order processes, controller modes and tuning methods, and complex control schemes. It also covers control valves, construction, characteristics, and applications. The syllabus includes introduction to process models, control actions, controller settings optimization methods, multi-loop control examples, and final control elements like valves.

Uploaded by

Akhil Kathi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

EE171 Process Control

L-T-P-Cr: 3 - 0 -0-3
Objective:
I. To study the basic characteristics of first order and higher order processes.
II. To get adequate knowledge about the characteristics of various controller modes and methods
of tuning of controller
III. To study about various complex control schemes.
IV. To study about the construction, characteristics and application of control valves.
V. To study the five selected unit operations and a case study of distillation column control

Prerequisite: Control Systems


Outcome: To provide basic knowledge of controllers, find control elements and the processes.
Syllabus:
Unit 1. INTRODUCTION: Need for process control – mathematical model of first order level, pressure
and thermal processes – higher order process – interacting and non-interacting systems – continuous
and batch processes – self-regulation – servo and regulator operations. 9 Lecture
Unit 2. CONTROL ACTIONS AND CONTROLLERS: Basic control actions – characteristics of on-off,
proportional, single-speed floating, integral and derivative control modes – P+I, P+D and P+I+D control
modes – pneumatic and electronic controllers to realize various control actions. 9 Lecture
Unit 3. OPTIMUM CONTROLLER SETTINGS: Evaluation criteria – IAE, ISE, ITAE and ¼ decay ratio –
determination of optimum settings for mathematically described processes using time response and
frequency response – Tuning –Process reaction curve method – Ziegler Nichols method – Damped
oscillation method. 9 Lecture
Unit 4. MULTILOOP CONTROL: Feed-forward control – ratio control- cascade control – inferential
control – split-range control – introduction to multivariable control – examples from distillation column
and boiler systems. 7 Lecture
Unit 5. FINAL CONTROL ELEMENT: I/P converter – pneumatic and electric actuators – valve positioner –
control valves – characteristics of control valves – inherent and installed characteristics – valve body –
commercial valve bodies – control valve sizing – cavitation and flashing – selection criteria. 7 Lecture
Unit 6. Microprocessors and Microcontrollers, their applications in process control, Hierarchical system,
Control of Fuzzy system 3 Lecture

SUGGESTED READINGS:
1. Stephanopoulis, G, Chemical Process Control, Prentice Hall of India, New Delhi, 1990.
2. Eckman. D.P., Automatic Process Control, Wiley Eastern Ltd., New Delhi, 1993.
3. Coughanour and Koppel, Process system Analysis and Control
4. T.A. Lee, G.L. Adams and W.M.G ains, Computer Process Control (Modelling and Optimization)
5. K.J.M. Douglasre , Process Dynamic and Control – Vol-I (Analysis of Dynamic Systems)
6. Pollard A.Process Control, Heinemann educational books, London, 1971.
7. Harriott. P., Process Control, Tata McGraw-Hill Publishing Co., New Delhi, 1991.
8. F.G. Shinskay, Process Control System –
9. Cecil and Smith, Digital Computer Process Control –

You might also like