Roof Truss Design
Roof Truss Design
Roof Truss Design
Design Data:-
Load Calculations:-
Live Load =
Exposed area of the wall per frame normal to the wind direction, A =
Assuming buildings with low degree of permeability,the internal pressure coefficient C pi =
l/w = 1.8769106999
From table 4 of IS 875--Part-3:1985,the external wind pressure coefficients are as given below:-
From table 5 of IS 875--Part-3:1985,the external wind pressure coefficients are as given below:-
Load combinations :-
i) 1.5DL + 1.5LL
1.00
0.98
1.00
50.00m/sec
0.20
14
0.62KN/sqm
4.732KN/m
0.75KN/sqm
5.715KN/m
50.00m/sec
49.00m/sec
1.44KN/sqm
29.03sqm
0.20
62.40sqm
(Windward side)