Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Table Torque Tabel Torsi Baut Flange PDF

    Uploaded by

    wibowo wibowo
    The document provides a torque table for flanges with recommended tightening procedures. It lists torque loads in Nm for flanges of different sizes from 0.5 to 14 inches based on material class ratings from 150 to 2500. It recommends using molybdenum disulfide or nickel powder as lubricants. The tightening procedure is a four stage process of torquing bolts to 30%, 60%, 100%, and another 100% of the final load in a clockwise pattern.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Table Torque Tabel Torsi Baut Flange PDF

    Uploaded by

    wibowo wibowo
    1K views1 page
    The document provides a torque table for flanges with recommended tightening procedures. It lists torque loads in Nm for flanges of different sizes from 0.5 to 14 inches based on material class ratings from 150 to 2500. It recommends using molybdenum disulfide or nickel powder as lubricants. The tightening procedure is a four stage process of torquing bolts to 30%, 60%, 100%, and another 100% of the final load in a clockwise pattern.

    Original Title

    table torque tabel torsi baut flange.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides a torque table for flanges with recommended tightening procedures. It lists torque loads in Nm for flanges of different sizes from 0.5 to 14 inches based on material class ratings from 150 to 2500. It recommends using molybdenum disulfide or nickel powder as lubricants. The tightening procedure is a four stage process of torquing bolts to 30%, 60%, 100%, and another 100% of the final load in a clockwise pattern.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views1 page

    Table Torque Tabel Torsi Baut Flange PDF

    Uploaded by

    wibowo wibowo
    The document provides a torque table for flanges with recommended tightening procedures. It lists torque loads in Nm for flanges of different sizes from 0.5 to 14 inches based on material class ratings from 150 to 2500. It recommends using molybdenum disulfide or nickel powder as lubricants. The tightening procedure is a four stage process of torquing bolts to 30%, 60%, 100%, and another 100% of the final load in a clockwise pattern.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Torque table

    Torque procedure for flanges

    The torque loads are in Nm and are based on suitable lubricants on stud threads and nut bearing faces.
    Recommended is Molybenum di-sulphide or Nickel powder anti-seize compounds.

    The torque load is to be applied in a four stage tightening method:


    1. Torque the bolts at 30% of the final load in the appropriate bolt pattern.
    2. Torque the bolts at 60% of the final load
    3. Torque the bolts at 100% of the final load
    4. Torque the bolts at 100% of the final load in a clockwise pattern (check)

    Note:
    Torque is based on gasket type, gasket size and bolt size

    Flange rating - torque in Nm


    NPS DN Class 1500 Class 2500
    inch mm min. max. min. max. min. max. min. max. min. max. min. max.
    0.5 15 41 54 41 54 41 54 95 163 95 163 68 136
    0.75 20 41 54 81 95 81 95 95 163 95 163 85 136
    1 25 41 54 81 95 81 95 149 258 149 258 149 217
    1.25 32 41 54 81 95 81 95 149 258 149 258 285 339
    1.5 40 41 54 136 163 136 163 230 393 271 393 420 488
    2 50 81 122 81 95 81 95 149 258 176 258 298 339
    2.5 65 81 149 136 163 136 163 230 393 258 393 407 488
    3 80 122 163 136 163 136 163 190 312 366 488 624 678
    4 100 95 163 136 190 258 325 353 569 569 705 963 1085
    5 125 136 217 149 217 380 488 488 813 800 1085 1735 2034
    6 150 176 271 149 217 353 447 407 678 719 922 2535 2983
    8 200 244 271 244 353 542 691 658 1085 1152 1491 2413 2983
    10 250 230 434 339 393 678 800 685 1085 2129 2712 4122 5966
    12 300 325 434 488 569 678 827 759 1152 2034 2983 6250 8026
    14 350 407 664 488 569 922 1085 854 1274 2874 4312

    bolt size
    NPS DN Class Class Class Class Class Class
    inch mm 150 300 600 900 1500 2500
    0.5 15 1/2 1/2 1/2 3/4 3/4 3/4
    0.75 20 1/2 5/8 5/8 3/4 3/4 3/4
    1 25 1/2 5/8 5/8 7/8 7/8 7/8
    1.25 32 1/2 5/8 5/8 7/8 7/8 1
    1.5 40 1/2 3/4 3/4 1 1 1-1/8
    2 50 5/8 5/8 5/8 7/8 7/8 1
    2.5 65 5/8 3/4 3/4 1 1 1-1/8
    3 80 5/8 3/4 3/4 7/8 1-1/8 1-1/4
    4 100 5/8 3/4 7/8 1-1/8 1-1/4 1-1/2
    5 125 3/4 3/4 1 1-1/4 1-1/2 1-3/4
    6 150 3/4 3/4 1 1-1/8 1-3/8 2
    8 200 3/4 7/8 1-1/8 1-3/8 1-5/8 2
    10 250 7/8 1 1-1/4 1-3/8 1-'7/8 2-1/2
    12 300 7/8 1-1/8 1-1/4 1-3/8 2 2-3/4
    14 350 1 1-1/8 1-3/8 1-1/2 2-1/4

    NEM Energy bv - Modular HRSG Systems


    Project: Tanjung Uncang CCPP 120 MW Project

    You might also like