Submarine Cable Systems

1
 Terrestrial Network Terrestrial Network
Central Office Central Office

ODF CTU ODF CTU

MAN HOLE Submarine Network MAN HOLE

BMH BMH
HAND HOLE HAND HOLE

REPAIR JOINT REPAIR JOINT

Reach into the Future with Hexatronic

Submarine Cable Systems
Originating from the former Ericsson cables operations, Hexatronic Submarine Cable at a glance:
Hexatronic has extensive experience within submarine • Designed for depths down to 3000 m
cable manufacturing and installation. With a renowned • With or without enhanced toning or
Swedish quality and competence, we know how to electroding capabilities
deliver submarine cable systems designed to withstand • Loose tube or slotted core ribbon options
the toughest conditions. • Superior mechanical and water blocking properties

The Hexatronic Submarine Cable Systems offering covers For a wider selection of products from Hexatronic Cables
all aspects related to submarine cabling from the central & Interconect Systems, please refer to the main catalogue
office, land section to the beach manhole and crossing Fiber Solutions for Access and Transport Networks or
under the sea. visit www.hexatronic.com

Hexatronic supports your project from start to finish, to Contact the Hexatronic sales team to find your nearest
ensure reliable subsea cable operations, that will connect wholesaler +46 (0) 10 - 453 02 00, [email protected]
people and places for generations to come.

ONLINE CATALOGUE

For the digital catalogue and more information about our products and services, please visit hexatronic.com
Hexatronic’s catalogues are also available online at issuu: issuu.hexatronicpartners.se

HCI 28701-0005-A
2
 Loading of submarine cable

Building the Networks of the World

Connecting people and places and transferring huge Complete turn-key solutions
amounts of information at extremely high speed, is what Hexatronic offers complete solutions for submarine
makes the world go round. Hexatronic provides the life- cables and the entire passive fiber infrastructure based
line that connects continents, countries and islands, on on scalable and future-proof technology.
the land and under the sea.
Hexatronic Cables & Interconnect Systems offers:
Extensive knowledge and experience • Over 25 years of experience with references
With a distinguished history of over 25 years, from all over the world
originating from Ericsson, Hexatronic has a unique • Swedish quality and technical proficiency
knowledge and solid experience. Worldwide submarine • Total turn-key solutions for the entire passive
cable projects include design, manufacturing, project fiber infrastructure
management and installation. The focus is on providing • High quality optical fibers from world-leading
producers
cost effective, time saving installations, with the ability to
customize according to the specific requirements.

Hexatronic load out pier Hexatronic cable manufacturing plant 34 000m2, Hudiksvall, Sweden
Lat: 61° 43’ 8.2488” Long: 17° p’ 38.1456”

3
 Hexatronic Submarine Systems
Global References
Hexatronic has extensive experience in worldwide submarine cable projects. Our references include a
range of different needs and solutions. Here is a selection of a few installation types.

The Baltic Sea Projects ADONES – The Angola Domestic Network System Project
cable type:Ribbon cable type: Loose tube
project: Supply of submarine cables and accessories project: Turn-key

C.A.T. Thailand Project The North Sea Project

cable type: Ribbon cable type: Ribbon
project: Turn-key project: Turn-key

Philippines, Globe Telecom Project NordBalt Project

cable type: Loose tube cable type: Loose tube
project: Turn-key project: Supply of submarine cables and accessories, services

4
Submarine Cable Design
To ensure fiber optic cables have a long life span, with depths of 0 to 500 m. Most commonly the DA cables
Hexatronic’s submarine cables are built to offer the best are installed no deeper than 200 m. For depths greater
protection from water ingress and potential damage. than 500 m the single armored (SA) cable is used.
An outer sheath, normally made of high tensile poly-
Two basic designs are used: loose tube or slotted core. propylene yarn wrapped around the armoring faiclitate
The loose tube design is based on fibers protected in a the handling of the cable during installation.
hermetical stainless steel tube. The slotted core design
incorporates fibers arranged in ribbons. The slotted core The product range comprises of cables and joints for
is protected in a copper tube. depths down to 3 000 m. All loose tube cables are
designed for both Universal Joint (UJ) and Universal
A polyethylene sheath and one or two layers of steel wire Quick Joint (UQJ) qualification and are offered with or
armoring is used to provide high tensile strength and without enhanced toning and electroding capabilities.
good mechanical protection. The cables are armored Electroding allows the cable to be detected and tracked.
depending on where they are going to be installed. This facilitates locating the cable if it has been broken or
Double armored (DA) cables are installed in shallow water an object on the seabed has moved it.

Optical fibers Optical fibers

Stainless steel tube Slotted core of polyethylene Polyethylene sheath

Polyethylene sheath Water blocking tape Wrapping of

polypropylene yarns

Galvanized steel wires Copper tube

covered with bitumen

Wrapping of Galvanized steel

polyester tape wires covered
with bitumen

Wrapping of
polypropylene yarns

Loose tube Slotted core

5
 LOOSE TUBE CABLES

Hexatronic’s loose tube cables provide superior mechanical The cables are resistant to tensile forces and impact caused by an-
protection, easy handling and reliable performance. All cables have choring, recovery operations and handling.
steel wire armoring in one or several layers and/or stainless steel tube All loose tube cables and joints are built with the highest quality
to provide the highest protection and water blocking properties. protection to ensure a long life span for maximum efficiency over long
distances.

Single Armored
TOL 404 1050 GJMLTV, 10-ton SA
Single-armored, unitube cable where moderate
protection is required in submarine applications.
This design includes a hermetically sealed stain-
less tube (3.7 mm outer diameter). Inside the tube
the fibers are free to move in the thixotropic water
blocking compound. The tube is protected by a
polyethylene sheath, one layer of galvanized steel
wires and wrapped in a layer of polypropylene yarn.
The unitube technique results in a high packing
density. This permits a small outer diameter and
easy handling.

design: Loose tube, single armor

type: 10 ton, ≤ 3000 m
capacity: 12 - 96 fibers

Double Armored
TOL 404 1051 GJMLTV, 15-ton DAL

Double-layer armored, unitube cable where high

protection is required in submarine a­ pplications.
This design includes a hermetically sealed stainless
tube (3.7 mm outer diameter). Inside the tube the
fibers are free to move in the thixotropic water
blocking compound. The tube is protected by a
polyethylene sheath, two layers of galvanized steel
wires and wrapped in a layer of p
­ olypropylene yarn.

design: Loose tube, double armor

type: 15 ton, ≤ 3000 m
capacity: 12 - 96 fibers

TOL 404 1062 GJMLTV, 25-ton DA

Double-layer armored, unitube cable with the

same principal design as the GJMLTV, 15-ton DA.
design: Loose tube, double armor
type: 25 ton, ≤ 3000 m
capacity: 12 - 96 fibers

6
TOL 404 1054 GJMLTV, 40-ton DAH
Double-layer armored with the same principal
design as the GJMLTVa, 15-ton DA.

design: Loose tube, double armor

type: 40 ton, ≤ 3000 m
capacity: 12 - 96 fibers

Electroding / Toning – Single Armored

TOL 404 1080 GJMMLTV, 10-ton SA
Double-layer armored with the same principal
design as the GJMLTV, 10-ton DA. The cable incor-
porates a copper layer wrapped around the stain-
less tube for electroding and toning.

design: Loose tube, single armor, electroding

type: 10 ton, ≤ 3000 m
capacity: 12 - 96 fibers

Electroding / Toning – Double Armored

TOL 404 1082 GJMMLTV, 25-ton DA
Double-layer armored with the same principal
design as the GJMLTV, 25-ton DA. The cable incor-
porates a copper layer wrapped around the stain-
less tube for electroding and toning.

design: Loose tube, double armor, electroding

type: 25 ton, ≤ 3000 m
capacity: 12 - 96 fibers

TOL 404 1083 GJMMLTV, 40-ton DAH

Double-layer armored with the same principal
design as the GJMLTV, 15-ton DA.

design: Loose tube, double armor, electroding

type: 40 ton, ≤ 3000 m
capacity: 12 - 96 fibers

Submarine Joints for Loose Tube Cables

NCD 601 0014 Submarine Joint Closure
Closure made of heavy-duty stainless steel and
hermetically sealed cable joints for loose tube fiber
optic submarine cables. The joint can host up to
48 fibers.

design: Straight joint for GJMLTV

capacity: 1 - 48 fibers

NCD 601+ Universal Joint for Submarine Cables

Universal Joint is a technology developed by the
Universal Joint Consortium to facilitate efficient
maintenance of installed submarine cable systems.
Most of Hexatronic’s submarine cables are
qualified for this technology and for some cable
types this joint type is used in installation
projects of new systems.

design: UJ for 10-, 25-, 40 ton submarine

cables
capacity: 1 - 96 fibers

7
 General Data – Loose Tube Cables
Armor Temperature (°C) Coil
Product Name Fiber No. Fiber Type SA DA RA NTTS (kN) Water Depth (m) Electroding Operation Storage Installation UJ/UQJ Diameter (m)
GJMLTV 12-96 G.65x Yes Yes No 100-400 3000 No -30 to +60 -40 to +70 -15 to +40 Yes 3
GJMMLTV 12-96 G.65x Yes Yes No 100-400 3000 Yes -30 to +60 -40 to +70 -15 to +40 Yes 3

Product Information – Loose Tube Cables

Fiber Wires (no./mm) Weight (kg/m)
Product No.* Product Name No. Type Electroding 1st Layer 2nd Layer Diameter (mm) in Air in Water NTTS (kN)
TOL4041050/xxA GJMLTV G.652.D 10 TON SA 12-48 G.652.D No 14/3.0 - 22 1.1 0.8 ≤ 100
GJMLTV 10 TON SA 12-96 G.65x No 14/3.0 - 22 1.1 0.8 ≤ 100
TOL4041051/xxA GJMLTV G.652.D 15 TON DAL 12-48 G.652.D No 18/2.2 18/3.0 26 1.9 1.4 ≤ 150
GJMLTV 15 TON DAL 12-96 G.65x No 18/2.2 18/3.0 26 1.9 1.4 ≤ 150
TOL4041062/xxA GJMLTV G.652.D 25 TON DA 12-48 G.652.D No 14/3.0 20/3.0 28 2.3 1.8 ≤ 250
GJMLTV 25 TON DA 12-96 G.65x No 14/3.0 20/3.0 28 2.3 1.8 ≤ 250
TOL4041054/xxA GJMLTV G.652.D 40 TON DAH 12-48 G.652.D No 12/3.8 16/4.4 32 3.4 2.7 ≤ 400
GJMLTV 40 TON DAH 12-96 G.65x No 12/3.8 16/4.4 32 3.4 2.7 ≤ 400

TOL4041080/xxA GJMMLTV G.652.D 10 TON SA 12-48 G.652.D Yes 14/3.0 - 22 1.1 0.8 ≤ 100
GJMMLTV 10 TON SA 12-96 G.65x Yes 14/3.0 - 22 1.1 0.8 ≤ 100
TOL4041081/xxA GJMMLTV G.652.D 15 TON DAL 12-48 G.652.D No 18/2.2 18/3.0 26 1.9 1.5 ≤ 150
GJMMLTV 15 TON DAL 12-96 G.65x No 18/2.2 18/3.0 26 1.9 1.5 ≤ 150
TOL4041082/xxA GJMMLTV G.652.D 25 TON DA 12-48 G.652.D Yes 14/3.0 20/3.0 28 2.3 1.8 ≤ 250
GJMMLTV 25 TON DA 12-96 G.65x Yes 14/3.0 20/3.0 28 2.3 1.8 ≤ 250
TOL4041083/xxA GJMMLTV G.652.D 40 TON DAH 12-48 G.652.D Yes 12/3.8 16/4.4 32 3.5 2.7 ≤ 400
GJMMLTV 40 TON DAH 12-96 G.65x Yes 12/3.8 16/4.4 32 3.5 2.7 ≤ 400

*where xx = fiber count (12-, 24-, 48-f.)

Product Information – Loose Tube Cable Joints

Product No. Product Name Fiber No. Note
NCD6010014 Straight joint for GJMLTV 12-48
NCD6010014/1 Armor Kit SA & DAL 12-48 2 pcs/joint required
NCD6010014/2 Armor Kit DA & DAH 12-48 2 pcs/joint required
NCD60100xx Straight joint for GJMLTV 96
NCD60100xx/1 Armor Kit SA & DAL 96 2 pcs/joint required
NCD60100xx/2 Armor Kit DA & DAH 96 2 pcs/joint required

NCD6010036 UJ for GJM(M)LTV SA to SA 12-96

NCD6010038 UJ for GJM(M)LTV DA to DA 12-96
NCD6010039 UJ for GJM(M)LTV DAH to DAH 12-96
NCD6010041 UJ for GJM(M)LTV SA to DA 12-96
NCD6010042 UJ for GJM(M)LTV SA to DAH 12-96
NCD6010045 UJ for GJM(M)LTV DA to DAH 12-96

NCD6010053 UQJ Ericsson GJM(M)LTV Tool Kit 12-48

NCD6010054 UQJ for GJM(M)LTV SA to SA 12-48
NCD6010055 UQJ for GJM(M)LTV DAL to DAL 12-48
NCD6010056 UQJ for GJM(M)LTV DA to DA 12-48
NCD6010057 UQJ for GJM(M)LTV DAH to DAH 12-48
NCD6010058 UQJ for GJM(M)LTV SA to DAL 12-48
NCD6010059 UQJ for GJM(M)LTV SA to DA 12-48
NCD6010060 UQJ for GJM(M)LTV SA to DAH 12-48
NCD6010061 UQJ for GJM(M)LTV DAL to DA 12-48
NCD6010062 UQJ for GJM(M)LTV DAL to DAH 12-48
NCD6010063 UQJ for GJM(M)LTV DA to DAH 12-48

8
RIBBON CABLES

Hexatronic’s ribbon cables offer high packing density and The cable core is also filled with a water repelling compound for
efficient fiber management as well as high protection for fiber extra reassurance. The cable design enables extremely long delivery
in the harsh conditions under the sea. Exceptional mechanical length with a minimum number of bulky joint closures.
and water blocking properties are provided by a slotted cable
core design, protected by a copper tube and with steel wire
armoring. This combination has a good resistance to crushing
and heavy impacts, such as anchoring, recovery operations or
manhandling. Protection from the water is achieved by the copper
tube acting as a water barrier.

Single Armored
TOL 404 1010 and TOL 404 1038 GASLMLTV Submarine Cables 5 ton SAL Single Armored
GASLMLTV, 5-ton SAL is a single armored light fiber
ribbon cable for submarine installations where light
to moderate protection is required. This submarine
cable is based on our well-proven 4- or 8-fiber ribbon
cable design. Added on to the inner PE-jacket is a
waterproof copper tube, followed by a second outer
polyethylene jacket and a layer of galvanized steel
wires. The complete cable is wrapped with a layer of
polypropylene yarn.

design: Slotted core ribbon, single armor

type: 5 ton, ≤ 500 m
capacity: 12 - 192 fibers

TOL 404 1016 and TOL 404 1039 GASLMLTV Submarine Cables 10 ton SA Single Armored
Single-layer armored with the same principal design
as the GASLMLTV, 5-ton SAL.

design: Slotted core ribbon, single armor

type: 10 ton, ≤ 500 m
capacity: 12 - 192 fibers

TOL 404 1023 and TOL 4040 1040 GASLMLTV Submarine Cables 15 ton SAH Single Armored
Single-layer armored with the same principal design
as the GASLMLTV, 5-ton SAL.

design: Slotted core ribbon, single armor

type: 15 ton, ≤ 500 m
capacity: 12 - 192 fibers

9
 Double Armored
TOL 404 1011 and TOL 4040 1024 GASLMLTV Submarine Cables 20 ton DA Double Armored
GASLMLTV, 20-ton DA is a double armored fiber
ribbon cable for submarine installation where
high protection is required. This submarine cable
is based on our well-proven 4- or 8- fiber ribbon
cable design. Added on to the inner PE-jacket is
a waterproof copper tube, followed by a second
outer polyethylene jacket and two layers of galva-
nized steel wires. The complete cable is wrapped
with a layer of polypropylene yarn.

design: Slotted core ribbon, double armor

type: 20 ton, ≤ 500 m
capacity: 12 - 192 fibers

TOL 4040 1002 and TOL 404 1042 GASLMLTV Submarine Cables 40 ton DAH Double Armored
Double-layer armored with the same principal
design as the GASLMLTV, 20-ton DA.

design: Slotted core ribbon, double armor

type: 40 ton, ≤ 500 m
capacity: 12 - 192 fibers

Rock Armored
TOL 404 1043 and TOL 404 1041 GASLMLTV Submarine Cables 20 ton RA Rock Armored
The GASLMLTV, 20-ton RA is a rock armored
fiber ribbon cable for submarine installation in
areas where the cable is exposed to severe
mechanical wear and tear. For example, installa-
tion direct on rock or shore landings where the
cable is hit by forces from waves and tides.
This submarine cable is based on our well-proven
4- or 8-fiber ribbon cable design. Added on to the
inner PE-jacket is a waterproof copper tube,
followed by a second outer polyethylene jacket
and a triple layer of galvanized steel wires. The
complete cable is wrapped with a layer of
polypropylene yarn.
design: Slotted core ribbon, triple armor, rock
type: 20 ton, ≤ 500 m
capacity: 12 - 192 fibers

Submarine Joints
NCD 601 0010 and 0008 Submarine Cable Joint
The NCD 601 joint is designed for jointing
of Hexatronic fiber optic submarine cables,
maintaining the mechanical, optical and
electrical properties of the cable.

The joint closure is made of corrosion resistant

stainless steel alloy. The watertight outer housing
provides the mechanical strength and protection.
An inner sealed box contains the fiber organizers
and can accommodate splice sleeves for up to 96
fibers in the NCD 601 0010 model and up to 192
fibers in the NCD 601 0008 model.

NCD 601 0010 is designed for 4-fiber ribbon submarine cables.

NCD 601 0008 is designed for 8-fiber ribbon submarine cables.

design: Straight joint for GASLMLTV

capacity: 1 - 192 fibers

10
General Data – Ribbon Submarine Cables
Armor Temperature (°C) Coil
Product Name Fiber Count Fiber Type SA DA RA NTTS (kN) Water Depth (m) Electroding Operation Storage Installation UJ/UQJ Diameter (m)
GASLMLTV 12-192 G.65x Yes Yes Yes 50-400 500 Yes -30 to +60 -40 to +70 -15 to +40 Yes 3

Product Information – Ribbon Submarine Cables

Fiber Wires (no./mm) Weight (kg/m)
Product No.* Product Name No. Type 1st Layer 2nd Layer 3rd Layer Diameter (mm) in Air in Water NTTS (kN)
TOL4041010/xxA GASLMLTV G.652.D 5 TON SAL 12-96 G.652.D 20/3.0 - - 28 1.7 1.2 ≤ 50
GASLMLTV 5 TON SAL 12-96 G.65x 20/3.0 - - 28 1.7 1.2 ≤ 50
TOL4041038/xxxA GASLMLTV G.652.D 5 TON SAL 96-192 G.652.D 22/3.0 - - 30 1.9 1.3 ≤ 50
GASLMLTV 5 TON SAL 96-192 G.65x 22/3.0 - - 30 1.9 1.3 ≤ 50
TOL4041016/xxA GASLMLTV G.652.D 10 TON SA 12-96 G.652.D 16/4.2 - - 31 2.4 1.8 ≤ 100
GASLMLTV 10 TON SA 12-96 G.65x 16/4.2 - - 31 2.4 1.8 ≤ 100
TOL4041039/xxxA GASLMLTV G.652.D 10 TON SA 96-192 G.652.D 17/4.2 - - 33 2.6 1.9 ≤ 100
GASLMLTV 10 TON SA 96-192 G.65x 17/4.2 - - 33 2.6 1.9 ≤ 100
TOL4041023/xxA GASLMLTV G.652.D 15 TON SAH 12-96 G.652.D 12/6.0 - - 34 3.4 2.6 ≤ 150
GASLMLTV 15 TON SAH 12-96 G.65x 12/6.0 - - 34 3.4 2.6 ≤ 150
TOL4041040/xxxA GASLMLTV G.652.D 15 TON SAH 96-192 G.652.D 12/6.0 - - 36 3.7 2.8 ≤ 150
GASLMLTV 15 TON SAH 96-192 G.65x 12/6.0 - - 36 3.7 2.8 ≤ 150
TOL4041011/xxA GASLMLTV G.652.D 20 TON DA 12-96 G.652.D 20/3.0 20/4.2 - 37 4.1 3.2 ≤ 200
GASLMLTV 20 TON DA 12-96 G.65x 20/3.0 20/4.2 - 37 4.1 3.2 ≤ 200
TOL4041024/xxxA GASLMLTV G.652.D 20 TON DA 96-192 G.652.D 22/3.0 21/4.2 - 39 4.4 3.4 ≤ 200
GASLMLTV 20 TON DA 96-192 G.65x 22/3.0 21/4.2 - 39 4.4 3.4 ≤ 200
TOL4041002/xxA GASLMLTV G.652.D 40 TON DAH 12-96 G.652.D 20/3.0 18/4.9 - 38 4.6 3.6 ≤ 400
GASLMLTV 40 TON DAH 12-96 G.65x 20/3.0 18/4.9 - 38 4.6 3.6 ≤ 400
TOL4041042/xxxA GASLMLTV G.652.D 40 TON DAH 96-192 G.652.D 22/3.0 21/4.9 - 40 4.9 3.8 ≤ 400
GASLMLTV 40 TON DAH 96-192 G.65x 22/3.0 21/4.9 - 40 4.9 3.8 ≤ 400
TOL4041043/xxA GASLMLTV G.652.D 20 TON RA 12-96 G.652.D 20/3.0 20/4.2 24/5.0 50 8.2 6.4 ≤ 200
GASLMLTV 20 TON RA 12-96 G.65x 20/3.0 20/4.2 24/5.0 50 8.2 6.4 ≤ 200
TOL4041041/xxxA GASLMLTV G.652.D 20 TON RA 96-192 G.652.D 22/3.0 21/4.2 24/5.0 53 8.7 6.8 ≤ 200
GASLMLTV 20 TON RA 96-192 G.65x 22/3.0 21/4.2 24/5.0 53 8.7 6.8 ≤ 200
*where xx = fiber count (12-, 24-, 48-f.)

Product Information – Ribbon Submarine Cable Joints

Product No. Product Name Fiber No.
NCD6010010 Straight Joint for GASLMLTV 12-96
NCD6010008 Straight Joint for GASLMLTV 96-192

UJ for GASLMLTV 12-96

11
 CABLE PARTS FOR INTEGRATION

Throughout our history of supplying high quality, reliable cable Cable up to 24 km can be installed without a factory joint. Cables that
solutions, we have developed a long track record with leading power are longer than 24 km require factory joints. Repair joints can also be
cable suppliers. Fiber optic submarine cable parts for integration into provided.
power cables, enables global suppliers to meet the growing need for
more power over greater distances.

In courtesy of ABB

Global Installations

Hexatronic has delivered more than 3 000 km

of fiber optic cable parts for hybrid cables, to
well known cable suppliers worldwide.

The hybrid cables are used in different parts

of the power grid. In most cases the hybrid
cables are connections to offshore wind farms,
offshore oil and gas platforms or interconnect
cables for power utilities.

In courtesy of ABB
12
GJMLV Submarine Optical Cable Part 12-96 Fibers
The cable part is based on a hermetically
sealed stainless tube of 3.7mm outer diameter.
Inside the tube the fibers are free to move in
thixotropic water blocking compound. The steel
tube is protected by a semiconductive polypro-
pylene sheath. The fibers are easy to identify
due to color and colored yarns. The cable part
is designed to be integrated in submarine elec-
trical power cables.

design: Loose tube

type:For integration, ≤ 3000 m
capacity: 12 - 96 fibers

GASLMLV Submarine Optical Cable Part 12-192 Fibers, Ribbon

This submarine cable part is based on our
well-proven 4- or 8- fiber ribbon cable design.
Added on to the inner polyethylene jacket is a
waterproof copper tube, followed by asecond
outer semiconductive polyethylene jacket.

design: Slotted core ribbon

type: For integration, ≤ 500 m
capacity: 12 - 192 fibers

General Data – Submarine Cable for Integration

Bending Radius (m) Temperature (°C)
Product Name Type Fiber Count Fiber Type Water Depth (m) Semi-Conductive Sheath Nom. Diameter (mm) Weight (kg/m) Loaded Unloaded Operation Storage Installation
GJMLV Loose Tube 12-96 G.65x 3000 Available 11.5 0.12 ≥ 1.5 ≥ 0.75 -40 to +80 -40 to +80 -15 to +40
GASLMLV Ribbon 12-192 G.65x 500 Available 18 0.4 ≥ 1.5 ≥ 0.75 -30 to +60 -40 to +70 -15 to +40

13
 TERRESTRIAL PRODUCTS

Hexatronic’s terrestrial cables and network products offer efficient panels, rack systems, joint closures etc. All tested and approved
installation for the entire passive infrastructure. All terrestrial cables are for use with submarine cables. For the full range of products from
optimized in terms of capacity, quality and operational expenditure, Hexatronic Cables & Interconect Systems, please refer to the main
for networks with the highest requirements. In addition, Hexatronic catalogue Fiber Solutions for Access and Transport Networks or visit
offers a wide variety of fiber optic accessories such as termination www.hexatronic.com

Loose Tube Cables

TOL 401 2098 GRCLDV, DryTech
Slim loose tube cable with concentric core design, with up to six tubes
per cable. The cable is all dielectric. DryTech filling compound is used
in the cable core.

design: Concentric core, extra slim type: Dielectric, DryTech

capacity: 12 - 192 fibers diameter: 11 - 18.5 mm

Ribbon Cables
TOL 401 1013 and TOL 401 1001 GASLDV
4-fiber ribbon cable using slotted core design. The design reduces
installation costs and gives superior fiber protection. The cable is
dielectric, making it suitable for installation where there is electrical
interference.

design:
Slotted core ribbon type: Dielectric
capacity:
Ø 9.5 mm 4 - 48 fibers, Ø 12.5 mm 4 - 48 fibers,
Ø 14 mm 48 - 96 fibers

TOL 401 1002 and TOL 401 1020 GASLDV

8-fiber ribbon cable using slotted core design. The design allows high
packing density that reduces installation costs and gives superior fiber
protection. Water blocking filling compound in the TOL 401 1002
cable and dry water blocking tape in the TOL 410 1020 cable
prevents water penetration along the cables. The cable is dielectric,
making it suitable for installation where there is electrical interference.

design:Slotted core ribbon type: Dielectric

capacity:Ø 15.5 mm 8 - 192 fibers, Ø 20 - 22.5 mm,
288 - 640 fibers

Product Information – Terrestrial Cables

Fiber
Product No.* Product Name Type No. Type
TOL4012098/xxA GRCLDV Loose Tube 12-96 G.652.D
GRCLDV Loose Tube 12-288 G.65x
TOL4011001/xxA GASLDV Ribbon 12-96 G.652.D
TOL4011002/xxA GASLDV Ribbon 96-192 G.652.D
GASLDV Ribbon 12-192 G.65x

14
Joint Closure
NCD 506 + Fiber Joint Closure
Closure for higher fiber counts in harsh outdoor environments. The generous size of the
fiber organizers makes installation fast and trouble free. The design is compact but easy to
expand to accommodate very large fiber counts. The closure can also handle mid-span
access. Several versions and accessories are available resulting in a total capacity of 144 fibers
to more than 2000 fibers depending on configuration.

type: Underground, stainless steel

sealing:IP class 68
capacity: ≤576 single fiber splices
≤288 ribbon fiber splices

NCD 504 + Fiber/Duct Joint Closure

Plastic joint closure for outdoor, direct buried installations. The closure is designed for outdoor,
underground installation in manholes. The closure can also handle mid-span access.

type: Outdoor, plastic closure

capacity: 96 (single)/192 (ribbon) splices
sealing: IP class 68

ODF
NCD 513+ ODF Pre-terminated, with Stub Cable, 2U
Pre-terminated ODF with a capacity from 24 to 96 SC (192 LC) connectors. Options include:
halogen-free, flame-retardant, loose tube, ribbon or micro cable. Optional accessories include
horizontal patch cord guides for space-saving mounting directly onto the front of the ODF.

type: Pre-terminated, 19” or ETSI mount, 2U

size:400x249x86 mm
capacity: 24-96 SC, 24-192 LC
cable options: Halogen-free, flame-retardant
loose tube, ribbon or micro cable, 10-100 m
connector options: SC, SC/APC, LC, LC/APC

15
 Industry Leading System Solutions
for Fiber Optic Communications
Hexatronic Cables & Interconnect Systems develops, manufactures, markets
and provides solutions within the fiber optic cable infrastructure, for telecom
companies. Hexatronic Cables & Interconnect Systems manufacture fiber
optic cable, duct, copper cable and network accessories. The company
originates from the former Ericsson site in Hudiksvall. Our products are
developed and manufactured by Swedish specialists, with many years of
experience and unique expertise in fiber optics. The product portfolio
includes the industry leading brands Ribbonet® and Micronet.

A Part of Hexatronic Group

Hexatronic Cables & Interconnect Systems is a part of Hexatronic which is an
innovative Swedish technology group, specializing in fiber communications.
The Group provides products and solutions for the fiber optic network and
together, the independent, entrepreneurial companies offer a full range of
passive infrastructure. We combine our large corporate stability and
resources with small company flexibility and speed.

Our customers are companies within the telecommunications industry such

as communications and telecom suppliers, operators and network owners.
The other companies within The Group are, Memoteknik in Skellefteå,
Hexatronic Elektronik & Data in Gothenburg, The Blue Shift and
Proximion in Stockholm and TD Fiberoptik in Örebro.

For more information about Hexatronic Group: www.hexatronicgroup.com

Hexatronic Cables & Interconnect Systems AB, Kabelvägen 1, 824 82 Hudiksvall, Sweden
Tel +46 (0)10 453 02 00 [email protected] www.hexatronic.com

linkedin.hexatronicpartners.se twitter.hexatronicpartners.se youtube.hexatronicpartners.se issuu.hexatronicpartners.se

16