1.

An Analytic Model for Fault Diagnosis in Power Systems Considering Malfunctions

of Protective Relays and Circuit Breakers
2. Fault-Location System for Multiterminal Transmission Lines
3. A Fuzzy Rule-Based Approach for Islanding Detection in Distributed Generation
4. A Novel Three-Phase to Five-Phase Transformation Using a Special Transformer
Connection
5. High-Efficiency Voltage Regulator for Rural Networks
6. Optimized Modulation for AC–DC Harmonic Immunity in VSC HVDC
Transmission
7. Optimal Capacitor Placement and Sizing in Unbalanced Distribution Systems With
Harmonics Consideration Using Particle Swarm Optimization
8. Design of a Mode Decoupling STATCOM for Voltage Control of Wind-Driven
Induction Generator Systems
9. A Power-Quality Index to Assess the Impact of Voltage Harmonic Distortions and
Unbalance to Three-Phase Induction Motors
10. Power-Management Strategies for a Grid-Connected PV-FC Hybrid System
11. Optimal location and control of shunt FACTS for transmission of renewable energy
in large power systems
12. Wind Farm to Weak-Grid Connection using UPQC custom power device
13. Enhancement of power quality in distribution system using D-STATCOM
14. Research on three-level static synchronous compensator
15. Control Scheme of Cascaded H-Bridge STATCOM Using Zero-Sequence Voltage
and Negative-Sequence Current
16. Instantaneous power control of D-STATCOM with consideration of power factor
correction
17. A new 84-pulse VSC configuration using multi-level DC voltage reinjection for
especial applications
18. Non Linear Control of STATCOM
19. A High Performance Induction Motor Drive System Using Fuzzy Logic Controller
20. An Online Simplified Rotor Resistance Estimator for Induction Motors
21. Design of a hybrid PID plus fuzzy controller for speed control of induction motors
22. Design on Vector Control System of AC Motor for Hybrid Electric Vehicles
23. A hybrid system based approach to Direct Torque Control (DTC) of induction
motors
24. Vector controlled PMSM drive based on fuzzy speed controller
25. Design of controller for PMSM
26. Single-phase hybrid active power filter using single switch parallel active filter and
simple passive filter
27. Implementation and Control of an Hybrid Multilevel Converter with Floating DC-
links for Current Waveform Improvement
28. Harmonic elimination in single phase systems by means of a hybrid series active
filter (HSAF)
29. APF for harmonic voltage resonance suppression in distribution system
30. Dynamic DC-bus voltage control strategies for a three-phase high power shunt
active power filter
31. Control circuit for active power filter with an instantaneous reactive power control
algorithm modification
32. A hybrid system based approach to Direct Torque Control (DTC) of induction
motors
33. Torque ripple reduction in direct torque control of induction machines by use of all
voltage vectors of matrix converters
34. Novel Direct Torque Control Based on Space Vector Modulation With Adaptive
Stator Flux Observer for Induction Motors
35. Improved Fault-Location System for Railway Distribution System Using
Superimposed Signal
36. Input-Output Linearization and Robust Sliding-Mode Controller for the VSC-
HVDC Transmission Link
37. ANN-Based SVC Switching at Distribution Level for Minimal-Injected Harmonics
38. Reference Current Computation for Active Power Filters by Running DFT
Techniques
39. Dynamic Hysteresis Current Control to Minimize Switching for Three-Phase Four-
Leg VSI Topology to Compensate Nonlinear Load
40. Design and Implementation of a Current-Source Converter for Use in Industry
Applications of D-STATCOM
41. Design of a 28 V-to-300 V/12 kW Multicell Interleaved Flyback Converter Using
Intercell Transformers
42. Implementation and Performance Evaluation of a Fast Dynamic Control Scheme
for Capacitor-Supported Interline DVR
43. Effects of Switching Asymmetry on an Isolated Full-Bridge Boost Converter
44. A High-Power-Factor Single-Stage Single-Switch Electronic Ballast for Compact
Fluorescent Lamps
45. A Three-Phase Interleaved DC–DC Converter With Active Clamp for Fuel Cells
46. Flexible Power Electronic Transformer
47. Single-Phase AC–AC Converter Based on Quasi-Z-Source Topology
48. An Inrush Mitigation Technique of Load Transformers for the Series Voltage Sag
Compensator