Scribd
Upload
132 views2 pages

Ex Chloride PDF

This document discusses three common methods for testing chloride levels: the mercuric nitrate method, silver nitrate (Mohr) method, and mercuric thiocyanate method. The mercuric nitrate method uses a reaction of mercuric nitrate and chloride that produces mercuric chloride and nitrate ions. The silver nitrate method uses a titration reaction of silver nitrate and potassium chromate with chloride ions that produces a silver chromate precipitate. The mercuric thiocyanate method involves a reaction of chloride with mercuric thiocyanate that produces mercuric chloride and free thiocyanate ions, which then react with ferric ions to form a

Uploaded by

budi_alamsyah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
132 views2 pages

Ex Chloride PDF

This document discusses three common methods for testing chloride levels: the mercuric nitrate method, silver nitrate (Mohr) method, and mercuric thiocyanate method. The mercuric nitrate method uses a reaction of mercuric nitrate and chloride that produces mercuric chloride and nitrate ions. The silver nitrate method uses a titration reaction of silver nitrate and potassium chromate with chloride ions that produces a silver chromate precipitate. The mercuric thiocyanate method involves a reaction of chloride with mercuric thiocyanate that produces mercuric chloride and free thiocyanate ions, which then react with ferric ions to form a

Uploaded by

budi_alamsyah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Chloride tests explained

Chloride
Mercuric Nitrate, Mohr Argentometric and
For water and wastewater
Mercuric Thiocyanate Methods

Introduction
Chlorides are present in all potable water supplies and in sewage, usually as a metallic salt. When
sodium is present in drinking water, chloride concentrations in excess of 250 mg/L give a salty
taste. If the chloride is present as a calcium or magnesium salt, the taste detection level may be as
high as 1000 mg/L chloride.
Chloride is essential in the human diet and passes through the digestive system unchanged,
thereby becoming one of the major components of raw sewage. The wide use of zeolite spheres in
water softeners also contributes a large amount of chloride to sewage and wastewaters.
High chloride concentrations in water are not known to have toxic effects on humans, although
large amounts may act corrosively on metal pipes and be harmful to plant life. The maximum
allowable chloride concentration of 250 mg/L in drinking water has been established for reasons of
taste rather than as a safeguard against physical hazard.

Chemical reactions
Mercuric nitrate method
Mercuric nitrate reacts selectively with all the chloride present in a sample to produce mercuric
chloride and nitrate ions. When all the chloride present in the sample has been complexed, excess
mercuric ions combine with diphenylcarbazone to form a purple-colored complex indicating the
end point. Hach procedures use Diphenylcarbazone Reagent Powder containing the indicator and
a buffer for maximum convenience and reagent stability.
– –
Hg ( NO 3 ) 2 + 2Cl → HgCl 2 + 2NO 3
Silver nitrate method (Mohr Argentometric method)
In the chloride test, using silver nitrate as the titrant and potassium chromate as the indicator,
silver nitrate first reacts selectively with the chloride present in the sample to produce insoluble
white silver chloride. After all the chloride has been precipitated, the silver nitrate then reacts with
the potassium chromate to form an orange-colored silver chromate precipitate, thereby marking
the end point of the titration. Potassium chromate indicator is combined with a buffer in Chloride 2
Indicator Powder.
– –
AgNO 3 + K 2 CrO 4 + Cl → AgCl + NO 3 + K 2 CrO 4

Ag 2 CrO 4
2AgNO 3 + K 2 CrO 4 → + 2KNO 3
(Orange)

Chloride
Page 1 of 2
Chloride

Mercuric Thiocyanate method


Colorimetric determination of chloride by the Mercuric Thiocyanate Method involves reaction of
chloride in the sample with mercuric thiocyanate to produce mercuric chloride and free thiocyanate
ions. In the presence of Fe3+ (ferric ion), the free thiocyanate ion forms highly colored ferric
thiocyanate in proportion to the chloride concentration. Two liquid reagents have been formulated
for this test: Mercuric Thiocyanate Solution and Ferric Ion Solution.

Hg ( SCN ) 2 – –
1. + 2Cl → HgCl 2 + 2SCN
(Mercuric Thiocyanate)
3+ – Fe ( SCN ) 3
2. Fe + 3SCN →
(Red-orange)

Chloride
Page 2 of 2

You might also like