Thermatrac air-to-water heat pump water heater

Key Features:
1. World renowned compressors with Eco-friendly HFC refrigerant to match high COP achieved
2. High quality heat exchanger (tube-in-tube and stainless steel flat plate), ideal for direct potable water heating
3. Easily accessible control box
4. Large access panels for easy servicing
5. Robust UV resistant GI. Cabinet construction – suitable for outdoor installation
6. User-friendly LCD electronic controls monitor operation for reliability and easy interaction
7. Standard safety features to ensure trouble-free operation; high-low pressure switch, flow switch, overheat cut-off
protection, etc.
8. Environmental friendly hot water system – cost only 1/4 of similar fossil fuel system
Technical Specifications
Outdoor
Compressor Heat exchanger Dimension
Fan
Ref Model Heating Rated Rated Max. Max. Volts Noise Operating
Water Water Pressure
To Capacity Input Amps Input Amps Phase Refrigerant Level Weight
Type No. No. Conn. Flow Drop Length Width Height
Pic kW kW A kW A Hertz dB(A) kg
BSP Rate mm mm mm

mm m3/h kPa

TRT-7 7.0 1.7 8.0 2.6 11.8 220-240/1/50 R-417A Rotary 1 1 20 4 22 53 64 567 503 783

1 TRT-10 9.5 2.3 10.9 3.6 16.5 220-240/1/50 R-417A Rotary 1 1 25 6 25 56 110 710 710 908

TRT-18 17.9 4.5 8.8 6.9 13.5 380-415/3/50 R-417A Scroll 1 1 40 8 27 58 145 810 810 975

TRT-35 35.0 8.9 17.6 12.8 25.5 380-415/3/50 R-417A Scroll 2 2 40 10 32 62 293 1450 705 1290
2
TRT-40 40.7 10.5 19.8 13.8 26.2 380-415/3/50 R-417A Scroll 2 2 40 10 32 62 325 1450 705 1290

3 TRT-75 74.4 19.1 39.5 25.0 46.0 380-415/3/50 R-417A Scroll 2 2 65 25 40 72 650 2000 1100 1980

Note:
• Preset water temperature: 55°C
• Maximum water temperature: 60°C
• Maximum working pressure (water side): 3.0 MPa
• Testing conditions: ambient temperature: dry bulb:20°C, wet bulb:15°C, water temperature raised 15°C to 55°C
• Ambient temperature operation range: -7 to 43°C

Dimension and clearance

Picture 1 Picture 2 Picture 3

Rheem Manufacturing Company (Singapore) Pte Ltd

8 Pandan Crescent, UE Tech Park #02-02 Singapore 128464 Authorised Dealer
Tel (For Sale) : (65) 6872 1161
Tel (Service) : (65) 6872 2043
Fax : (65) 6872 1151
E-mail : [email protected]
Website : http//www.rheemmfg.com.sg
 Thermatrac water-to-water heat pump water heater
Key Features:
1. World renowned compressors with Eco-friendly HFC refrigerant to match high COP achieved
2. High quality stainless steel flat plate heat exchanger, ideal for direct potable water heating
3. Isolated compressor for quiet and vibration free operation
4. Easily accessible control box
5. Large access panels for easy servicing
6. Robust UV resistant GI. Cabinet
7. Electronic controls monitor operation for long reliable life
8. Standard safety features to ensure trouble-free operation; high-low
pressure switch, flow switch, over heat cut-off protection, etc.
9. Environmental friendly hot water system

Technical Specifications
Heat exchanger

Compressor Heating side Cooling side Dimension

Model Heating Rated Rated Max. Max. Volts Condenser Evaporator Noise Operating

Capacity Input Amps Input Amps Phase Refrigerant Water Water Pressure Water Water Pressure Level Weight

kW kW A kW A Hertz Type No. Conn. Flow Drop Conn. Flow Drop dB(A ) kg Length Width Height

BSP Rate BSP Rate mm mm mm

mm m3/h kPa mm m3/h kPa

TRW-42 42.0 9.8 18.5 14.7 27.8 380-415/3/50 R-417A Scroll 2 40 7.2 50 40 7.2 50 40 320 1530 815 800

TRW-82 82.5 19.0 38.5 28.5 57.8 380-415/3/50 R-417A Scroll 2 40 14.5 50 40 14.5 50 40 680 2000 1100 1100

TRW-220 220.0 51.2 108.0 76.8 162.0 380-415/3/50 R-417A Scroll 4 100 36.0 50 100 36.0 50 40 1500 2500 1800 1100

Note:
• Preset water temperature: 55°C
• Maximum water temperature: 60°C
• Maximum working pressure (water side): 3.0MPa
• Testing conditions: cooling side: inlet: 15°C, outlet:10°C; water heated from 15°C to 55°C
Rheem Manufacturing Company (Singapore) Pte Ltd
8 Pandan Crescent, UE Tech Park #02-02 Singapore 128464 Authorised Dealer
Tel (For Sale) : (65) 6872 1161
Tel (Service) : (65) 6872 2043
Fax : (65) 6872 1151
E-mail : [email protected]
Website : http//www.rheemmfg.com.sg
 Thermatrac air-to-water heat pump spa/pool heater
Features:
1. Exclusive powder-coated cabinet
2. Large air evaporator coil
3. Scroll or rotary compressor depending model
4. Spiral titanium/coaxial tube
5. Plumbing connections: easy installation
6. Controls – digital: on board diagnostics
7. Multiple safety features, trouble-free operation

Picture 1 Picture 2

Picture 3 Picture 4

Technical Specifications

Outdoor
Compressor Heat exchanger Dimension
Fan
Ref Model Heating Rated Rated Max. Max. Volts Noise Net
Water Water Pressure
To Capacity Input Amps Input Amps Phase Refrigerant Level Weight
Type No. No. Conn. Flow Drop Length Width Height
Pic kW kW A kW A Hertz dB(A) kg
Rate mm mm mm
3
mm m /h kPa

TRP-9 8.9 1.7 8.0 2.6 12.0 220-240/1/50 R417A Rotary 1 1 50 6 12 53 64 567 503 783
1
TRP-13 12.9 2.4 11.0 3.6 16.5 220-240/1/50 R417A Rotary 1 1 50 7 12 56 110 710 710 908

2 TRP-21 21.0 4.3 8.8 6.5 13.2 380-415/3/50 R417A Scroll 1 1 50 8 12 62 145 810 810 975

3 TRP-51 50.8 9.9 18.0 14.9 27.0 380-415/3/50 R417A Scroll 2 2 63 15 15 62 325 1450 705 1290

4 TRP-100 100.0 20.0 38.0 30.0 57.0 380-415/3/50 R417A Scroll 2 2 110 30 16 72 650 2000 1100 1980

Note:
• Titanium heat exchanger
• Testing conditions: ambient temperature: dry bulb:24°C, wet bulb:19°C, inlet water temperature: 27°C
• Ambient temperature operation range: -7 to 43°C
 Thermatrac residential air-to-water heat pump water heater
Standard features:
1. Absorbs environmental heat and transfers it to the water, at the same time cold air can be delivered to the space
(kitchen, basement, garage, etc.) through duct
2. One-piece design c/w rotary compressor, user-friendly LCD controller for easy interaction
3. Stainless steel jacket
4. Floor mounted
5. SS304 water tank, durable and corrosion resistant
6. Efficient heat exchanger (Ni-Ti alloy SS321) inside tank, efficient heat transfer
7. Heating element: 2 kW x 220 Volt
8. Pressure relief valve

All-in-One Type Technical Specifications

Outdoor
Compressor Dimension
Capacity Fan Water
Heating Rated Rated Max. Max. Volts Noise Net
L Conn. Duct
Model Capacity Input Amps Input Amps Phase Refrigerant Level Weight
Type No. No. BSP Diameter Height conn.
kW kW A kW A Hertz dB(A) kg
mm mm mm
mm

TRRD35-200 200 3.5 0.89 4.0 1.3 6.0 220-240/1/50 R417A Rotary 1 1 15 45 60 650 1500 150
TRRD35-300 300 3.5 0.89 4.0 1.3 6.0 220-240/1/50 R417A Rotary 1 1 15 45 60 650 1800 150

Note:
• Preset water temperature: 55°C
• Maximum water temperature: 60°C
• Maximum working pressure (water tank): 0.7 MPa
• Ambient temperature operation range: -7 to 43°C
• Testing conditions: ambient temperature: dry bulb:20°C, wet bulb:15°C; water heated from 15 to 55°C

Rheem Manufacturing Company (Singapore) Pte Ltd

8 Pandan Crescent, UE Tech Park #02-02 Singapore 128464 Authorised Dealer
Tel (For Sale) : (65) 6872 1161
Tel (Service) : (65) 6872 2043
Fax : (65) 6872 1151
E-mail : [email protected]
Website : http//www.rheemmfg.com.sg
 Thermatrac
HOT WATER STORAGE TANKS
MAINS PRESSURE
2000 TO 5000 LITRES
For larger tanks contact factory

STANDARD FEATURES
• SUS316L tank material
• 0.6MPa maximum working pressure
• Flanged Manhole
• Flanged water connec�ons (DIN standard)
• Li�ing lugs
• Angle legs
• Drain
• Pressure relief valve

OPTION:
• 1.0MPa maximum working pressure

NOTE: Tank insula�on on site by others

Dimensions and specifica�ons

Ver�cal type
Dimension Dry
Capacity
mm Weight
(Litre) (kg)
H φ1 φ2 d L1 L2
2000 2505 1200 840 24 210 150 600
3000 3355 1200 840 24 210 150 740
4000 2806 1600 1200 30 250 180 870
5000 3156 1600 1200 30 250 180 955

Rheem Manufacturing Company (Singapore) Pte Ltd

8 Pandan Crescent, UE Tech Park #02-02 Singapore 128464 Authorised Dealer
Tel (For Sale) : (65) 6872 1161
Tel (Service) : (65) 6872 2043
Fax : (65) 6872 1151
E-mail : [email protected]
Website : http//www.rheemmfg.com.sg
SUS316L tank: 0.6MPa Mild steel tank with copper lining: 0.6MPa
Max. Max. Copper
Mild steel
capacity Working thickness material capacity Working sheet
thickness
pressure pressure thickness
2m3 0.6MPa 4mm SUS316L 2m3 0.6MPa 6mm 1mm

3m3 0.6MPa 4mm SUS316L

3m3 0.6MPa 6mm 1mm
3
4m 0.6MPa 5mm SUS316L
4m3 0.6MPa 8mm 1mm
3
5m 0.6MPa 5mm SUS316L
5m3 0.6MPa 8mm 1mm
Note:
Leg material: SUS304

SUS316L tank: 1.0MPa Mild steel tank with copper lining: 1.0MPa
Max. Max. Copper
Mild steel
capacity Working thickness material capacity Working sheet
thickness
pressure pressure thickness
2m3 1.0MPa 6mm SUS316L 2m3 1.0MPa 8mm 1mm

3m3 1.0MPa 6mm SUS316L 3m3 1.0MPa 8mm 1mm

4m3 1.0MPa 8mm SUS316L 4m3 1.0MPa 10mm 1mm

5m3 1.0MPa 8mm SUS316L 5m3 1.0MPa 10mm 1mm

Note:
Leg material: SUS304