COMPARATIVE STATEMENT : ELECTRICAL WORKS

Name of work :- Construction of Multipurpose Cultural Hall at Namsai

Item
Code Item Detailed Specifications Quantity Unit

INTERNAL ELECTRICAL
101.00 Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial
(Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper
conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as
approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid
PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as
approved by the Deptt.) including 6 Amp flush type switch/ bell push .GI/ MS switch board (ISI marked)
with phenolic laminated sheet cover ,ceiling rose .etc. complete
Make (Anchor penta /Finolex / RR or equivalent make as approved.)

a Short point up to 3.00 metre. length. 30 Each

b Medium point up to 6.00 metre. Length. 74 Each
c Long point up to 10.00 metre. Length. 150 Each

Page 1 of 28
 Item
Code Item Detailed Specifications Quantity Unit

102.00 Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial
(Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper
conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as
approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid
PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the
Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch., GI/ MS switch
board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable
to third pin of the plug socket etc. as required complete, when placed elsewhere.
Make (Anchor penta /Finolex / RR or equivalent make as approved.)

a Short point up to 3.00 metre. length. 4 Each

b Medium point up to 6.00 metre. Length. 7 Each
c Long point up to 10.00 metre. Length. 8 Each

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed
industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic
copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent
Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16
Amps flush type socket outlets and 16 Amps flush type switch ( Anchor Penta / Finolex / RR or Equivalent
103.00 make as approved.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity
with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/
heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/
MW or equivalent make as approved by the Deptt.)

a Short point up to 3.00 metre. length. 2 Each

b Medium point up to 6.00 metre. Length. 4 Each

Page 2 of 28
 Item
Code Item Detailed Specifications Quantity Unit

c Long point up to 10.00 metre. Length. 15 Each

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable
FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade
up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC
conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.)
including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART -
III rigid PVC conduit wiring system.
104.00
a With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS:
9537 Part - III conduit. 750 Metre.
b With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. cable in 20 mm. dia. 2mm thick/ heavy rigid PVC
IS: 9537 Part - III conduit. 650 Metre.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable
FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade
up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in
surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit
(Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring
system.
105.00
a With 4 x 4 sq. mm. + earth continuity with 2x2.5 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC
IS: 9537 Part - III conduit. 60.00 Metre.
b With 4x 6 sq. mm. + earth continuity with 2x4 sq. mm. cable in 32 mm. dia. 2mm thick/ heavy rigid PVC IS:
9537 Part - III conduit. 100.00 Metre.

c With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC
IS: 9537 Part - III conduit. 80.00 Metre.

Page 3 of 28
 Item
Code Item Detailed Specifications Quantity Unit

d With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC
IS: 9537 Part - III conduit. 75.00 Metre.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof reversible
Double door IP-43 double door surface mounting horizontal TPN MCB DB incorporated with bas-bar,
Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with
106.00 making necessary connection as approved, specified and directed by the deptt.
Richa, Bentec, Adhunic, V-Guard make)
a 6 way TPN (8+18) double door 4 Each
b 8 way TPN (8+24) double door 4 Each

107.00 Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity
complete with making necessary connection as approved, specified and directed by the deptt.
B Series
(Schneider MG, legrand, Hager make)
a 6 to 32A 90 Each

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4P RCCB of the following
capacity complete with making necessary connection as approved, specified and directed by the deptt.
108.00
100/300mA sensitivity 4P RCCB
(Schneider neo break, C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the
Deptt.)
a 25A 1 Each
b 40A 7 Each

Page 4 of 28
 Item
Code Item Detailed Specifications Quantity Unit

Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth
plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee,
elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300
mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick 6 Each
chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

109.00

Supply, fitting & fixing 20 mmx5 mm G.I. strips drawn on vertically or horizontally on building
wall/parapet wall in surface system complete with supply of G.I. Nuts & Bolts, Screws etc including
riveting, soldering and making connection as approved by the Deptt.)with earth electrode G.I. strips and
200.00 Metre.
Lightning Arrestor etc. as specified and directed by the deptt.

110.00

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium
conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner
sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for
cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type
ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in
ground/partially in air (as required for termination over ground including excavation of cable trench up to
depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil,
debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/
Finolex make) .

111.00
a 3 & 1/2 Core A2XFY
b 50.00 Sq. mm.3 & 1/2 Core armoured U.G. cable 50.00 Metre
c 185.00 Sq. mm.3 & 1/2 Core armoured U.G. cable 100.00 Metre
Page 5 of 28
 Item
Code Item Detailed Specifications Quantity Unit

d 240.00 Sq. mm.3 & 1/2 Core armoured U.G. cable 80.00 Metre

Supply, installation, Testing & Commissioning of Main L. T. Panel (auditorium) , as per following
1 Nos
112.00 technical specification and consultants drawings as per requirement and as directed by the consultant:
All ACB Shall be 65kA (for incoming) & 50kA (for outgoing) with Ics=Icu=Icw=1sec. Microprocessor
based for O/L, S/C, E/F with release of MTX 2.5G of 'U' Power Omega of L&T or Equivalent.

All MCCB Shall be 50kA with Ics=Icu for 1 Sec. with Microprocessor Based Release for O/L, S/C & E/F
with front Operated Rotary Handle Mechanism.
Incoming feeders - 1 nos
Each of the incoming feeder will consist of
1 Nos 500 A 4P 36 kA MCCB
1 Lot - Indicating Lamps
1 Set - Voltmeter with selector switch
1 Set - Ammeter with selector switch
3- C.T 500/5A,5VA,Cl-1.0
1 Lot -Control Fuse, SP MCB, Accessories as required
Bus Bar-1 Set
1Set -400 TPN Alum Bus Bar of 36kA Short circuit rating for 1 Sec with heat shrunk colour coded PVC
sleeve fitted using DMC/SMC mounts
Outgoing Feeders as follows:
All out going feeders will have
1 No- ON Indicating Lamp
All ACB/MCCB feeder will have microprocessor based O/L, S/C & E/F release, rotary operating handle

Feeder ratings are furnished below:

2 Nos - 63A 10kA FP MCB

Page 6 of 28
 Item
Code Item Detailed Specifications Quantity Unit

8Nos - 40A 10kA FP MCB

1Nos - 25A 10kA FP MCB
1Nos - 100A 25kA FP MCCB
1Nos - 250A 36kA FP MCCB
3Nos - 32 10kA FP MCB
LUMINAIRES & FANS
Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of
following sweeps with making necessary connection as approved by the Deptt.)as required complete and as
113.00 directed by the Department.
Ventilator DX 250 mm sweep Louver type (ORIENT make), Brisk Air 250 mm sweep Louver type/ Trans
Air 150 mm sweep (Crompton make), Ventil Air DX 150 mm sweep Louver type (Havells make) 10 Each
a

Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories
like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by
the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO
114.00 make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make)
Energy efficient 5-star 1200 mm sweep. ORIENT PSPO / Usha / CROMPTON / Havells/ ATC or equivalent
make 4 Each
a

Supplying, installation, testing and Commission of following luminaries complete with all accessories such
as ballast, starter etc. mounting with necessary support with 1.5 sq.mm. P.V.C. insulated S.C.copper
115.00 conductor as required and as directed by the consultant
a i) Surface LED 15W 6500 k (Philips / Syska / Havells ) 25 Each
b ii) Recessed LED 8W 6500k (Philips / Syska / Havells) 34 Each
c iii) Recessed LED 8W 3000k (Philips / Syska / Havells ) 161 Each
d iv) Recessed LED 15W 6500k (Philips/ Syska / Havells) 16 Each

Page 7 of 28
 Item
Code Item Detailed Specifications Quantity Unit

v)3000 k LED Tray light

75.00 Metre.
e
f vi)Philips TLED Battern BN 108C LED 20S PSU NW WH 4 Each

116.00 Supply & Fitting of suitable external Down light for porch with 20 W LED light source. 12 Each

EXTERNAL ELECTRICAL

Supplying, installation testing and commissioning of the following rating copper wound indoor / out door
type transformer complete including the payment to be made to power supply authority for supervision
charge, labour charge, cost of L.T/H.T metering etc. (excluding the cost of load security) and making
necessary arrangement for charging approval of the sub-station from the competent authority as directed and
117.00 specified by the department. Transformer should be as per CEA guidelines as ammended up to date upto 200
KVA star rating up to 5 star, above 200KVA as per CEA guidelines for losses along with LV enclosure.

a 200 KVA,50Hz.11/0.433 KV. Oil filled transformer with Off Circuit tap change. Provisional Each

118.00 Supplying including installation, testing and commissioning of Water Cooled caterpillar Diesel Generator
set coupled to suitable alternator of 415 V, AC, 3-Phase 0.8 p.f. mounted on a 1) M.S. Fabricated base
frame.,2) M.S. fuel tank of required capacity.,3) Residual Silencer.,4) EMF/Standard Control Panel.5)
Suitable batteries with lead.,5) First fill of lube oil.,6) Acoustic Enclosure complete with all accessories as
specified and directed by the department conforming to IS comprising the following Technical
Specification.. (RANGE FROM 200 KVA TO 1010 KV

Page 8 of 28
 Item
Code Item Detailed Specifications Quantity Unit

a GENERATOR SET SPECIFICATIONS

1. Model. 3306 - DITA GP - 4
2. Prime Power Rating KVA/KW. 250/200
3. No. of Phases. 3 phase.
CATERPILLAR ENGINE SPECIFICATION.
1. make).
2. Model. 3306 - DITA GP - 4
3. No. of Cylinders. 6
4. Aspiration. Natural
5. Cooling. Water Cooled.
6. Governor. Mechanical
7. Battery Capacity Rating. 120 AH 2X12 Volt.
ALTERNATOR SPECIFICATION.
1. make).
2. Voltage Regulation. +/- 1.0%
3. Insulation. Class - H.
4. Standard Enclosure. IP 23
5. No. of Phases. 3
KVA 250

b WITH AMF CONTROL PANEL Provisional Each

119.00 External Flood Lights Provisional Each

Total of Electrical W

Page 9 of 28
ATEMENT : ELECTRICAL WORKS

REMARKS
Rate Amount

Page 10 of 28
 REMARKS
Rate Amount

Page 11 of 28
 REMARKS
Rate Amount

Page 12 of 28
 REMARKS
Rate Amount

Page 13 of 28
 REMARKS
Rate Amount

311.00
941.00
Page 14 of 28
 REMARKS
Rate Amount
1,184.00

Page 15 of 28
 REMARKS
Rate Amount

1,700.00

2,340.00

2,360.00
1,125.00
1,125.00
2,360.00

Page 16 of 28
 REMARKS
Rate Amount

515.00

Page 17 of 28
 REMARKS
Rate Amount

Total of Electrical Works :- -

Page 18 of 28
 COMPARATIVE STATEMENT : STAGE LIGHITNG WORKS

Name of work :- Construction of Multipurpose Cultural Hall at Namsai

Item
Code Item Detailed Specifications Quantity Unit
Rate
STAGE LIGHTING

Supplying installation testing and commissioning of 1000 W Halogen profile light

consisting of 2 nos.150mm dia PC lenses, imported socket, ellipsoidal anodised
189.0 alluminium reflector, 1000W halogen BipinT-11 lamp, yoke colour frame & 6 Nos.
suitable clamp Make: Canara Lighting/ Modern Stage/ DLMC

Supplying installation testing and commissioning of 1000W Halogen Fresnel light

consisting of 1000W Halogen Bipin T-11 lamp, 150mm dia imported fresenel lens,
190.0 Imported socket, bottom sliding knob, yoke, colour lens, frame & suitable clamp. 6 Nos.
Make: Canara Lighting/ Modern Stage/DLMC

Supplying installation testing and commissioning of 1000W Planoconvex Spot

Light complete with 1000W Halogen Bipin CP-41 lamp, G-38 base socket,
191.0 spherical anodised reflector, 150 mm dia Planoconvex lens, rear sliding knob, yoke, 6 Nos.
colour frame & suitable clamp.Make: Canara Lighting/ Modern Stage/DLMC

Supplying installation testing and commissioning of 1000 W Halogen light with

mash & barndoor consisting of 2nos. single contact compressible holders, yoke,
192.0 1000W halogen tube & suitable clamp.Make: Canara Lighting/ Modern 6 Nos.
Stage/DLMC

Page 19 of 28
 Item
Code Item Detailed Specifications Quantity Unit
Rate
Supplying installation testing and commissioning of 1000W, 240 Volt, PAR Sealed
193.0 Beam Light with CRC Sheet Metal and alluminium die casting, mat black color, 14 Nos.
yoke & clamp.Make: Canara Lighting/ Modern Stage/DLM

Supplying installation of 3 section telescopic stand made of steel tube. Make:

194.0 Canara Lighting/ Modern Stage/DLMC 4 Nos.

Supplying installation testing and commissioning of 500W Halogen Cyclorama

Flood Light with 500W Halogen tube. Alluminium anodised reflector, 2 nos
195.0 compressible recessed single contact holders,colour frame & suitable clamp.Make: 5 Nos.
Canara Lighting/ Modern Stage/DLMC

Supplying installation testing and commissioning of 19 High quality, noise less

RGBW LED PAR light 54 x 3W high bright LED with 8 channels, beam 25
196.0 degree DMX 512, Auti master/slave, sound active. Make: Canara Lighting / 18 Nos.
Modern Stage/DLMC

Supplying installation testing and commissioning of Programmable Digital Lighting

197.0 Console 120 Dimmer Channel and 200 fixtures with 48 fader, 10 fader x 20 pages 1 Nos.
Make: Zero 88 / Pearl / PLS/DLMC

Supplying installation testing and commissioning of Cross connecting panel

192+192+48Way way having 4mm sheathed sockets fitted on the panel for
interchanging the light circuits with the dimmers as desired. The connection can be
198.00 made with patch cords having 4mm sheathed banana plugs at both the ends with 1 1 Nos.
mtr. super flexible cable of 40 SWG. The patch panel has neutral & earth bar
connection strip. Make: Canara Lighting/ Modern Stage/DLMC

Page 20 of 28
 Item
Code Item Detailed Specifications Quantity Unit
Rate

Supplying installation testing and commissioning of Floor mounted dimmer rack

with 48 nos single phase 5KW electronic dimmers to be distributed in 3 phases
199.00 with suitable bus bar arrangement housed in sheet metal enclosure. 0-10 volt Digital 1 Set.
output, output light indicator, local controls etc..Make Canara Lighting/ Modern
Stage/DLMC

Programming, installation, testing & commissioning including training to

department staff and operational manpower for 1 year from the date of
200.00 commissioning of the stage lighting equipment to the satisfaction of the 1 Lot
consultant and the department.

Design, Supply & Fabrication, Erection & Commissioning of M.S. Ladders /

Light Bars / Light Cage / light bars including other necessary support structures,
mechanical pulley arrangements, motors, starters, limit switches, sensors, etc for
201.00 the stage area & stage lighting as directed by the consultant including all material, 1 Lot.
labour, consumables including, Gas, welding rod, primer and synthectic paint etc.
complete in all respect as per design and as directed by the consultant as approved
by the consultant

Supply & fixing for 20W 3000k Dimmable Auditorium LED Ceiling FLushed
Down Light comprising of LED, dimmable driver suitable for lighting automation,
diffused reflector in recessed powder coated aluminium die cast fitting with safety
202.00 wire hooked to the roof structure complete in all respect as per drawings and as 101 Nos.
directed by the consultant. (Lamp Make: Philips / Syska/Havells/Bajaj)

Page 21 of 28
 Item
Code Item Detailed Specifications Quantity Unit
Rate

Supply & fixing of suitable Leading/Trailing Edge Dimmer System suitable for
100 Nos Dimmable Led Down Lights having minimum 4 channels, control touch
203.00 interface, ipad compatibility, complete in all respect for ambinece lighting of 1 Set
auditorium complete as per drawings and as directed by the consultant (make:
Phillips/Crestron/Rako/Lutron)

WIRING FOR AUDITORIUM AMBIENCE LIGHTING: Wiring for drawing

sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand)
cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic
copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco /
Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/
204.00 AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the
Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/
heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system.

a) With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm
thick/ heavy rigid PVC IS: 9537 Part - III conduit. Mtr.

Page 22 of 28
 Item
Code Item Detailed Specifications Quantity Unit
Rate
STAGE LIGHT POINT: Wiring for 5/6 pin 16 Amps power plug point with 4 sq.
mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR
conforming to IS-694: 1990 with flexible bright annealed electrolytic copper
conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or
Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring
system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16
Amps flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or
equivalent make as approved by the Deptt./ Havells make), GI/ MS switch board
205.00 (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm
cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm
thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/
AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the
Deptt.) (note: one end will be terminated to dimmer panel)

a a) Extra long point up to 15.00 metre. length. 20 Each

b b) Extra long point up to 20.00 metre. Length. 22 Each
c c) Extra long point up to 25.00 metre. Length. 22 Each

Supplying, installation, testing and Commission of following luminaries complete

with all accessories such as ballast, starter etc. mounting with necessary support
206 with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed
by the consultant
a v)3000 k LED Tray light 450.00 Mtr
Total of Stage Lighting Works :-

Page 23 of 28
MENT : STAGE LIGHITNG WORKS

REMARKS
Amount

Page 24 of 28
 REMARKS
Amount

Page 25 of 28
 REMARKS
Amount

Page 26 of 28
 REMARKS
Amount

Page 27 of 28
 REMARKS
Amount

Page 28 of 28