Scribd
Upload
45 views2 pages

Load Calculation Input Details

The document provides load calculation details for the ERA HOMES building located in Putiyakavu. It includes specifications for the building such as 8 stories, M30 grade concrete, and Fe415 grade steel. Load calculations are provided for dead load from self-weight, slabs, walls, and parapets. Live loads of 3 kN/m^2 for floors and 1.5 kN/m^2 for roofs are specified. Wind load is calculated as 1.6729891322 kN/m^2. Earthquake load is calculated based on the building location in seismic zone III.

Uploaded by

Joseph Sebastian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
45 views2 pages

Load Calculation Input Details

The document provides load calculation details for the ERA HOMES building located in Putiyakavu. It includes specifications for the building such as 8 stories, M30 grade concrete, and Fe415 grade steel. Load calculations are provided for dead load from self-weight, slabs, walls, and parapets. Live loads of 3 kN/m^2 for floors and 1.5 kN/m^2 for roofs are specified. Wind load is calculated as 1.6729891322 kN/m^2. Earthquake load is calculated based on the building location in seismic zone III.

Uploaded by

Joseph Sebastian
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

LOAD CALCULATION

Input details
1 Project name = ERA HOMES
2 Location = Putiyakavu
3 Number of storeys = G+8
4 Grade of concrete = M30
5 Grade of steel = Fe415
6 Characteric strength of concrete = 30 Mpa
7 Yield strength of steel = 250 Mpa
8 Density of concrete = 25 kN/m3
9 Density of steel =
10 Density of engineering brick = 20 kN/m3
Section details
1 Wall thickness = 230 mm
2 Slab depth = 150 mm
3 Stair slab thickness = 150 mm
4 Beam depth = 350 mm
5 Beam width = 230 mm
7 Column depth = 350 mm
8 Column width = 230 mm
9 wall height = 3 m

Load calculation
1 Dead load
a Self weight
It is automatically taken by STAAD
b Slab load (Floor load)
Slab depth = 150 mm
Density of concrete = 25 kN/m3
Slab weight = 3.75 kN/m2
Floor finish = 1 kN/m2
Total slab load = 4.75 kN/m2
c Wall load
Wall thickness = 230 mm
Density of engineering brick = 20 kN/m3
wall height = 3 m
Wall load as udl = 13.8 kN/m
d Parapet load
Height of parapet = 1.2 m
Density of engineering brick = 20 kN/m3
Parapet load = 5.52 kN/m
2 Live load
As per IS 875- part 2
Live load on floor = 3 kN/m2
live load on roof = 1.5 kN/m2
live load on stair = 3 kN/m2
3 Wind load
Vz = Vb*k1*k2*k3
k1 = 1.07
k2 = 1.05
k3 = 1
Vb = 47
Vz = 52.8045 m/s
Pz = 0.6*Vz^2
= 1672.9891322 N/m2
= 1.6729891322 kN/m2
4 Earth quake load
Zone of the location = III
Z = 0.16
Response redution factor ® = 5
Importance factor = 1.5
Time period in X direction = 0.09h/D^.5
Height of building (h) = 25.4 m
length in X direction = 14.14 m
length in Z direction = 19.7
Tx = 0.6079271247 sec
Time period in Y direction = 0.5150425541 sec
Sa/g = 1.36/T
Sa/g = 2.6405585117
Z/2*I/R = 0.024

You might also like