ALCATEL-LUCENT OMNIACCESS

207 SERIES ACCESS POINTS

FAST 802.11AC THAT’S AFFORDABLE
FOR EVERYONE

The affordable mid-range OmniAccess® 207 Series access point delivers high performance
802.11ac for medium density enterprise environments. With the integrated BLE and
supporting 802.3af power, the OmniAccess 207 Series AP enables enterprises to improve
their work efficiency and productivity with the lowest TCO.

The compact OmniAccess 207 Series AP UNIQUE BENEFITS

delivers a maximum concurrent data rate
•  Dual Radio 802.11ac Access Point
of 867 Mbps in the 5GHz band and 400 Mbps
in the 2.4GHz band (for an aggregate peak ¬ Supports up to 867 Mbps in the 5GHz
data rate of 1.3Gbps). Featuring 2x2:2SS, band (with 2SS/VHT80 clients) and
VHT160MHz and increased operating up to 400 Mbps in the 2.4GHz band
temperature, the 207 AP is ideal for (with 2SS/VHT40 clients).
medium device density environments, •  Advanced Cellular Coexistence (ACC)
such as schools, retail branches, warehouses, ¬ Minimizes interference from 3G/4G
hotels and enterprise offices, where the cellular networks, distributed antenna
environment is cost sensitive. systems and commercial small cell/
femtocell equipment.
•  Quality of Service for Unified
Communication apps
¬ Supports priority handling and policy
enforcement for unified communication
apps, including Microsoft Skype for Business,
with encrypted videoconferencing,
voice, chat and desktop sharing.
•  RF Management
¬ Adaptive Radio Management (ARM)
technology automatically assigns
channel and power settings, provides
airtime fairness, and ensures that
APs stay clear of all sources of RF
interference to deliver reliable,
high-performance WLANs.
¬ The OmniAccess 207 Series APs can
be configured to provide part-time or
dedicated air monitoring for spectrum
analysis and wireless intrusion
protection, VPN tunnels to extend
remote locations to corporate resources,
and wireless mesh connections where
Ethernet drops are not available.
•  Intelligent app visibility and control
¬ AppRF technology leverages deep
packet inspection to classify and block,
prioritize or limit bandwidth for over
2,500 enterprise apps or groups of apps.
• Security AP207 SERIES SPECIFICATIONS •  Maximum ratio combining (MRC) for
¬ Integrated wireless intrusion protection improved receiver performance
•  OAW-AP207 (controller-managed) and
offers threat protection and mitigation, AW-IAP207 (Instant): •  Cyclic delay/shift diversity (CDD/CSD) for
and eliminates the need for separate improved downlink RF performance
¬ 802.11ac – 5GHz 2x2 MIMO (867 Mbps
RF sensors and security appliances. •  Short guard interval for 20MHz, 40MHz
max rate) and 2.4GHz 2x2 MIMO (400
¬ IP reputation and security services Mbps max rate) radios, with a total of and 80MHz channels
identify, classify, and block malicious two integrated omni-directional downtilt •  Space-time block coding (STBC) for
files, URLs and IPs, providing dual- band antennas increased range and improved reception
comprehensive protection against
•  Low-density parity check (LDPC) for high-
advanced online threats.
WI-FI RADIO SPECIFICATIONS efficiency error correction and increased
¬ Integrated Trusted Platform Module throughput
•  AP type: Indoor, dual radio, 5GHz 802.11ac
(TPM) for secure storage of credentials
2x2 MIMO and 2.4GHz 802.11n 2x2 MIMO •  Transmit beam-forming (TxBF) for
and keys.
•  Software-configurable dual radio supports increased signal reliability and range
5GHz (Radio 0) and 2.4GHz (Radio 1) •  Supported data rates (Mbps):
•  5GHz: Two spatial stream Single User ¬ 802.11b: 1, 2, 5.5, 11
CHOOSE YOUR OPERATING (SU) MIMO for up to 867 Mbps wireless ¬ 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
MODE data rate to individual 2x2 VHT80 client ¬ 802.11n: 6.5 to 300 (MCS0 to MCS15)
OmniAccess 207 Series APs offer a devices
¬ 802.11ac: 6.5 to 867 (MCS0 to MCS9,
choice of operating modes to meet your •  2.4GHz: Two spatial stream Single User NSS = 1 to 2 for VHT20/40/80
unique management and deployment (SU) MIMO for up to 400 Mbps wireless
•  802.11n high-throughput (HT) support:
requirements. data rate to individual 2x2 VHT40 client
HT 20/40
devices (300 Mbps for HT40 802.11n
•  802.11ac very high throughput (VHT)
• Controller-managed mode – When client devices)
support: VHT 20/40/80
managed by OmniAccess Mobility •  Support for up to 255 associated client
Controllers, OmniAccess 207 Series APs •  802.11n/ac packet aggregation:
devices per radio, and up to 16 BSSIDs
offer centralized configuration, data A-MPDU, A-MSDU
per radio
encryption, policy enforcement and •  Supported frequency bands (country-
network services, as well as distributed specific restrictions apply): WI-FI ANTENNAS
and centralized traffic forwarding. •  AP207/IAP207: Two integrated dual-band
¬ 2.400 to 2.4835GHz
•  Instant mode – In Instant mode, a single downtilt omni-directional antennas for
¬ 5.150 to 5.250GHz
AP automatically distributes the network 2x2 MIMO with maximum antenna gain
configuration to other Instant APs in ¬ 5.250 to 5.350GHz of 3.4dBi in 2.4GHz and 6.6dBi in 5GHz.
the WLAN. Simply power-up one Instant ¬ 5.470 to 5.725GHz Built-in antennas are optimized for
AP, configure it over the air, and plug in ¬ 5.725 to 5.850GHz horizontal ceiling mounted orientation of
the other APs – the entire process takes •  Available channels: Dependent on the AP. The downtilt angle for maximum
about five minutes. If WLAN requirements configured regulatory domain gain is roughly 30 degrees.
change, a built-in migration path allows ¬ The maximum gain of the combined
•  Dynamic frequency selection (DFS)
207 Series Instant APs to become part of (summed) antenna patterns for all
optimizes the use of available RF spectrum
a WLAN that is managed by a Mobility elements operating in the same band is
•  Supported radio technologies:
Controller. 5.2dBi in 2.4GHz and 7.5dBi in 5GHz.
¬ 802.11b: Direct-sequence spread-
•  Remote AP (RAP) for branch deployments.
spectrum (DSSS)
•  Air monitor (AM) for wireless IDS, rogue OTHER INTERFACES
¬ 802.11a/g/n/ac: Orthogonal frequency-
detection and containment. •  One 10/100/1000BASE-T Ethernet
division multiplexing (OFDM)
•  Spectrum analyzer, dedicated or hybrid, network interface (RJ-45)
•  Supported modulation types:
for identifying sources of RF interference. ¬ Auto-sensing link speed and MDI/MDX
¬ 802.11b: BPSK, QPSK, CCK
•  Secure enterprise mesh. ¬ 802.3az Energy Efficient Ethernet (EEE)
¬ 802.11a/g/n/ac: BPSK, QPSK, 16-QAM,
64-QAM, 256-QAM •  Bluetooth Low Energy (BLE) radio

•  Transmit power: Configurable in ¬ Up to 3dBm transmit power (class 2)

increments of 0.5 dBm and -92dBm receive sensitivity

•  Maximum (conducted) transmit power ¬ Integrated antenna with roughly

(limited by local regulatory requirements): 30 degrees downtilt and peak gain
of 2.2dBi
¬ 2.4GHz band: +18 dBm per chain,
+21 dBm aggregate (2x2) •  Visual indicators (multi-color LEDs):
for System and Radio status
¬ 5GHz band: +18 dBm per chain,
+21 dBm aggregate (2x2) •  Reset button: factory reset (during device
power up)
¬ Note: conducted transmit power levels
exclude antenna gain. For total (EIRP) •  Serial console interface (proprietary;
transmit power, add antenna gain optional adapter cable available)

•  Advanced Cellular Coexistence (ACC) •  Kensington security slot

minimizes interference from cellular
networks

Alcatel-Lucent OmniAccess 207 Series Access Point

ALCATEL-LUCENT ENTERPRISE DATA SHEET
2
 POWER SOURCES AND REGULATORY
CONSUMPTION •  FCC/Industry of Canada
•  The AP supports direct DC power and •  CE Marked
Power over Ethernet (PoE) •  R&TTE Directive 1995/5/EC
•  When both power sources are available, •  Low Voltage Directive 72/23/EEC
DC power takes priority over PoE
•  EN 300 328
•  Power sources are sold separately
•  EN 301 489
•  Direct DC source: 12Vdc nominal, +/- 5%
•  EN 301 893
¬ Interface accepts 2.1/5.5-mm center-
•  UL/IEC/EN 60950
positive circular plug with 9.5-mm
length •  EN 60601-1-1, EN60601-1-2

•  Power over Ethernet (PoE): 48 Vdc (nominal)

802.3af/802.3at compliant source For more country-specific regulatory
¬ Unrestricted functionality with 802.3af information and approvals, please see your
PoE Alcatel-Lucent Enterprise representative.

•  Maximum (worst-case) power consumption:

12.3W (PoE) or 10.1W (DC) REGULATORY MODEL NUMBERS
•  Maximum (worst-case) power consumption •  OAW-AP207 and OAW-IAP207: APIN0207
in idle mode: 5.3W (PoE) or 4.4W (DC)
RELIABILITY
MOUNTING •  MTBF: 753,457hrs (86yrs) at +25C
•  The AP ships with two (white) mounting operating temperature
clips to attach to a 9/16-inch or 15/16-
inch flat T-bar drop-tile ceiling. CERTIFICATIONS
•  Several optional mount kits are available •  CB Scheme Safety, cTUVus
to attach the AP to a variety of surfaces;
•  UL2043 plenum rating
see the Ordering Information section
•  Wi-Fi Alliance (WFA) certified
below for details
802.11a/b/g/n/ac

MECHANICAL
WARRANTY
•  Dimensions/weight (unit, excluding
•  Limited lifetime warranty
mount accessories):
¬ 150mm x 150mm x 40mm
¬ 380g MINIMUM OPERATING SYSTEM
SOFTWARE VERSIONS
•  Dimensions/weight (shipping):
•  AOS-W 6.5.1.0
¬ 190mm x 180mm x 70mm
•  InstantOS 4.3.1.0
¬ 590g

ENVIRONMENTAL
•  Operating:
¬ Temperature: 0° C to +50° C (+32° F to
+122° F)
¬ Humidity: 5% to 95% non-condensing
•  Storage and transportation:
¬ Temperature: -40° C to +70° C (-40° F to
+158° F)

Alcatel-Lucent OmniAccess 207 Series Access Point

ALCATEL-LUCENT ENTERPRISE DATA SHEET
3
 RF PERFORMANCE TABLE
Maximum transmit power (dBm) Receiver sensitivity (dBm)
per transmit chain per receive chain
802.11b 2.4GHz
1 Mbps 18.0 -90.0
11 Mbps 18.0 -90.0
802.11g 2.4GHz
6 Mbps 18.0 -90.0
54 Mbps 18.0 -75.0
802.11n HT20 2.4GHz
MCS0/8 18.0 -90.0
MCS7/15 18.0 -71.0
802.11n HT40 2.4GHz
MCS0/8 18.0 -87.0
MCS7/15 18.0 -68.0
802.11a 5GHz
6 Mbps 18.0 -90.0
54 Mbps 17.5 -75.0
802.11n HT40 5GHz
MCS0/8 18.0 -87.0
MCS7/15 17.0 -68.0
802.11n HT40 5GHz
MCS0/8 18.0 -87.0
MCS7/15 17.0 -68.0
802.11ac VHT20 5GHz (SU-MIMO)
MCS0 18.0 -90.0
MCS8 16.0 -67.0
802.11ac VHT40 5GHz (SU-MIMO)
MCS0 18.0 -87.0
MCS9 15.0 -62.0
802.11ac VHT80 5GHz (SU-MIMO)
MCS0 18.0 -84.0
MCS9 15.0 -59.0

Maximum capability of the hardware provided (excluding antenna gain). Maximum transmit power is limited by local regulatory settings.

Alcatel-Lucent OmniAccess 207 Series Access Point

ALCATEL-LUCENT ENTERPRISE DATA SHEET
4
 ORDERING INFORMATION
Part Number Description
AP207 Series Access Points
OAW-AP207 OmniAccess AP207 802.11n/ac 2x2:2 Dual Radio Integrated Antenna AP
OAW-IAP207-RW OmniAccess Instant IAP207 (RW) 802.11n/ac Dual 2x2:2 Radio Integrated Antenna AP. Unrestricted
Regulatory Domain. MUST NOT be used for deployments in the United States, Japan or Israel.
OAW-IAP207-US OmniAccess Instant IAP207 (US) 802.11n/ac Dual 2x2:2 Radio Integrated Antenna AP. Restricted regulatory
domain: US
OAW-IAP207-IS OmniAccess Instant IAP207 (IS) 802.11n/ac Dual 2x2:2 Radio Integrated Antenna AP. Restricted regulatory
domain: Israel
OAW-IAP207-JP OmniAccess Instant IAP207 (JP) 802.11n/ac Dual 2x2:2 Radio Integrated Antenna AP. Restricted regulatory
domain: Japan
Mounting Spares
AP-220-MNT-C1 Indoor Access Point suspended ceiling rail mount kit (for flat rails only, black). Spare for the clips provided
with the AP.
Mounting Accessories
AP-220-MNT-C2 Indoor Access Point suspended ceiling rail mount kit (for Interlude and Silhouette rail styles only, black).
Alternate to standard clips provided with AP.
AP-MNT-CM1 Indoor Access Point suspended ceiling rail mount kit (industrial grade, metal). Fits most rail types
AP-220-MNT-W1 Indoor Access Point flat-surface mount kit (basic, black)
AP-220-MNT-W1W Indoor Access Point flat-surface mount kit (basic, white). Mechanically identical to AP-220-MNT-W1
AP-200-MNT-W3 Indoor Access Point flat surface mount kit (box style, secure, low-profile, large). Color: white
Other Accessories
AP-207-CVR-20 Kit of 20 snap-on covers for AP-207. Plain white, non-glossy, with holes for LED indicators. Color: white
Generic Indoor AP Accessories
AP-AC-12V30B OmniAccess 12V/30W AC-to-DC Desktop Style Power Adapter with Type B DC plug (2.1/5.5/9.5mm
circular, 90-degree angled). Note: does not include country specific AC power cord (PC-AC-xx).
PD-3501G-AC 1 Port 802.3af PoE Midspan 10/100/1000 15.4W. No power cord included.

enterprise.alcatel-lucent.com Alcatel-Lucent and the Alcatel-Lucent Enterprise logo are trademarks of Alcatel-Lucent. To view other
trademarks used by affiliated companies of ALE Holding, visit: enterprise.alcatel-lucent.com/trademarks. All other trademarks are the
property of their respective owners. The information presented is subject to change without notice. Neither ALE Holding nor any of its
affiliates assumes any responsibility for inaccuracies contained herein. (November 2016)