Diseo de Proyectos Elctricos en 3D Mediante Autodesk Revit

Autor: Richard Hernn Reyes Jara

Abstract— This electronic document is a live template. The kind of pagination anywhere in the paper. Do not number
various components of your paper [title, text, heads, etc.] are text heads-the template will do that for you.
already defined on the style sheet, as illustrated by the portions
Finally, complete content and organizational editing before
given in this document.
formatting. Please take note of the following items when
I. INTRODUCTION proofreading spelling and grammar:
This template, modified in MS Word 2003 and saved as
Word 97-2003 & 6.0/95 RTF for the PC, provides authors A. Abbreviations and Acronyms
with most of the formatting specifications needed for prepar- Define abbreviations and acronyms the first time they are
ing electronic versions of their papers. All standard paper used in the text, even after they have been defined in the
components have been specified for three reasons: (1) ease of abstract. Abbreviations such as IEEE, SI, MKS, CGS, sc, dc,
use when formatting individual papers, (2) automatic compli- and rms do not have to be defined. Do not use abbreviations
ance to electronic requirements that facilitate the concurrent in the title or heads unless they are unavoidable.
or later production of electronic products, and (3) confor-
mity of style throughout a conference proceedings. Margins, B. Units
column widths, line spacing, and type styles are built-in; • Use either SI (MKS) or CGS as primary units. (SI
examples of the type styles are provided throughout this units are encouraged.) English units may be used as
document and are identified in italic type, within parentheses, secondary units (in parentheses). An exception would
following the example. Some components, such as multi- be the use of English units as identifiers in trade, such
leveled equations, graphics, and tables are not prescribed, as 3.5-inch disk drive.
although the various table text styles are provided. The • Avoid combining SI and CGS units, such as current
formatter will need to create these components, incorporating in amperes and magnetic field in oersteds. This often
the applicable criteria that follow. leads to confusion because equations do not balance
II. PROCEDURE FOR PAPER SUBMISSION dimensionally. If you must use mixed units, clearly state
the units for each quantity that you use in an equation.
A. Selecting a Template (Heading 2)
• Do not mix complete spellings and abbreviations of
First, confirm that you have the correct template for your units: Wb/m2 or webers per square meter, not we-
paper size. This template has been tailored for output on the bers/m2. Spell out units when they appear in text: . . .
US-letter paper size. Please do not use it for A4 paper since a few henries, not . . . a few H.
the margin requirements for A4 papers may be different from • Use a zero before decimal points: 0.25, not .25. Use
Letter paper size. cm3, not cc. (bullet list)
B. Maintaining the Integrity of the Specifications
C. Equations
The template is used to format your paper and style the
text. All margins, column widths, line spaces, and text fonts The equations are an exception to the prescribed specifi-
are prescribed; please do not alter them. You may note cations of this template. You will need to determine whether
peculiarities. For example, the head margin in this template or not your equation should be typed using either the Times
measures proportionately more than is customary. This mea- New Roman or the Symbol font (please no other font).
surement and others are deliberate, using specifications that To create multileveled equations, it may be necessary to
anticipate your paper as one part of the entire proceedings, treat the equation as a graphic and insert it into the text
and not as an independent document. Please do not revise after your paper is styled. Number equations consecutively.
any of the current designations Equation numbers, within parentheses, are to position flush
right, as in (1), using a right tab stop. To make your equations
III. MATH more compact, you may use the solidus ( / ), the exp
Before you begin to format your paper, first write and function, or appropriate exponents. Italicize Roman symbols
save the content as a separate text file. Keep your text and for quantities and variables, but not Greek symbols. Use a
graphic files separate until after the text has been formatted long dash rather than a hyphen for a minus sign. Punctuate
and styled. Do not use hard tabs, and limit use of hard returns equations with commas or periods when they are part of a
to only one return at the end of a paragraph. Do not add any sentence, as in
 called root.tex - this is particularly important if your confer-
α+β =χ (1) ence is using PaperPlaza’s built in TEX to PDF conversion
tool.
Note that the equation is centered using a center tab stop.
Be sure that the symbols in your equation have been defined A. Headings, etc
before or immediately following the equation. Use (1), not Text heads organize the topics on a relational, hierarchical
Eq. (1) or equation (1), except at the beginning of a sentence: basis. For example, the paper title is the primary text head
Equation (1) is . . . because all subsequent material relates and elaborates on
this one topic. If there are two or more sub-topics, the next
D. Some Common Mistakes level head (uppercase Roman numerals) should be used and,
• The word data is plural, not singular. conversely, if there are not at least two sub-topics, then no
• The subscript for the permeability of vacuum ?0, and subheads should be introduced. Styles named Heading 1,
other common scientific constants, is zero with subscript Heading 2, Heading 3, and Heading 4 are prescribed.
formatting, not a lowercase letter o. B. Figures and Tables
• In American English, commas, semi-/colons, periods,
question and exclamation marks are located within Positioning Figures and Tables: Place figures and tables at
quotation marks only when a complete thought or name the top and bottom of columns. Avoid placing them in the
is cited, such as a title or full quotation. When quotation middle of columns. Large figures and tables may span across
marks are used, instead of a bold or italic typeface, to both columns. Figure captions should be below the figures;
highlight a word or phrase, punctuation should appear table heads should appear above the tables. Insert figures and
outside of the quotation marks. A parenthetical phrase tables after they are cited in the text. Use the abbreviation
or statement at the end of a sentence is punctuated Fig. 1, even at the beginning of a sentence.
outside of the closing parenthesis (like this). (A paren- TABLE I
thetical sentence is punctuated within the parentheses.) A N E XAMPLE OF A TABLE
• A graph within a graph is an inset, not an insert. The
word alternatively is preferred to the word alternately One Two
(unless you really mean something that alternates). Three Four
• Do not use the word essentially to mean approximately
or effectively.
• In your paper title, if the words that uses can accurately
replace the word using, capitalize the u; if not, keep We suggest that you use a text box to insert a
using lower-cased. graphic (which is ideally a 300 dpi TIFF or EPS file,
• Be aware of the different meanings of the homophones with all fonts embedded) because, in an document,
affect and effect, complement and compliment, discreet this method is somewhat more stable than directly
and discrete, principal and principle. inserting a picture.
• Do not confuse imply and infer. Fig. 1. Inductance of oscillation winding on amorphous magnetic core
• The prefix non is not a word; it should be joined to the versus DC bias magnetic field
word it modifies, usually without a hyphen.
• There is no period after the et in the Latin abbreviation Figure Labels: Use 8 point Times New Roman for Figure
et al.. labels. Use words rather than symbols or abbreviations when
• The abbreviation i.e. means that is, and the abbreviation writing Figure axis labels to avoid confusing the reader. As
e.g. means for example. an example, write the quantity Magnetization, or Magneti-
zation, M, not just M. If including units in the label, present
IV. USING THE TEMPLATE them within parentheses. Do not label axes only with units.
In the example, write Magnetization (A/m) or Magnetization
Use this sample document as your LaTeX source file to
A[m(1)], not just A/m. Do not label axes with a ratio of
create your document. Save this file as root.tex. You have to
quantities and units. For example, write Temperature (K),
make sure to use the cls file that came with this distribution.
not Temperature/K.
If you use a different style file, you cannot expect to get
required margins. Note also that when you are creating your V. CONCLUSIONS
out PDF file, the source file is only part of the equation. A conclusion section is not required. Although a conclu-
Your TEX → PDF filter determines the output file size. Even sion may review the main points of the paper, do not replicate
if you make all the specifications to output a letter file in the the abstract as the conclusion. A conclusion might elaborate
source - if you filter is set to produce A4, you will only get on the importance of the work or suggest applications and
A4 output. extensions.
It is impossible to account for all possible situation, one
would encounter using TEX. If you are using multiple TEX APPENDIX
files you must make sure that the “MAIN“ source file is Appendixes should appear before the acknowledgment.
 ACKNOWLEDGMENT [10] J. U. Duncombe, Infrared navigationPart I: An assessment of feasibil-
ity (Periodical style), IEEE Trans. Electron Devices, vol. ED-11, pp.
The preferred spelling of the word acknowledgment in 3439, Jan. 1959.
America is without an e after the g. Avoid the stilted [11] S. Chen, B. Mulgrew, and P. M. Grant, A clustering technique
expression, One of us (R. B. G.) thanks . . . Instead, try R. B. for digital communications channel equalization using radial basis
function networks, IEEE Trans. Neural Networks, vol. 4, pp. 570578,
G. thanks. Put sponsor acknowledgments in the unnumbered July 1993.
footnote on the first page. [12] R. W. Lucky, Automatic equalization for digital communication, Bell
References are important to the reader; therefore, each Syst. Tech. J., vol. 44, no. 4, pp. 547588, Apr. 1965.
[13] S. P. Bingulac, On the compatibility of adaptive controllers (Published
citation must be complete and correct. If at all possible, Conference Proceedings style), in Proc. 4th Annu. Allerton Conf.
references should be commonly available publications. Circuits and Systems Theory, New York, 1994, pp. 816.
[14] G. R. Faulhaber, Design of service systems with priority reservation,
R EFERENCES in Conf. Rec. 1995 IEEE Int. Conf. Communications, pp. 38.
[15] W. D. Doyle, Magnetization reversal in films with biaxial anisotropy,
[1] G. O. Young, Synthetic structure of industrial plastics (Book style with in 1987 Proc. INTERMAG Conf., pp. 2.2-12.2-6.
paper title and editor), in Plastics, 2nd ed. vol. 3, J. Peters, Ed. New [16] G. W. Juette and L. E. Zeffanella, Radio noise currents n short sections
York: McGraw-Hill, 1964, pp. 1564. on bundle conductors (Presented Conference Paper style), presented
[2] W.-K. Chen, Linear Networks and Systems (Book style). Belmont, at the IEEE Summer power Meeting, Dallas, TX, June 2227, 1990,
CA: Wadsworth, 1993, pp. 123135. Paper 90 SM 690-0 PWRS.
[3] H. Poor, An Introduction to Signal Detection and Estimation. New [17] J. G. Kreifeldt, An analysis of surface-detected EMG as an amplitude-
York: Springer-Verlag, 1985, ch. 4. modulated noise, presented at the 1989 Int. Conf. Medicine and
[4] B. Smith, An approach to graphs of linear forms (Unpublished work Biological Engineering, Chicago, IL.
style), unpublished. [18] J. Williams, Narrow-band analyzer (Thesis or Dissertation style), Ph.D.
[5] E. H. Miller, A note on reflector arrays (Periodical styleAccepted for dissertation, Dept. Elect. Eng., Harvard Univ., Cambridge, MA, 1993.
publication), IEEE Trans. Antennas Propagat., to be publised. [19] N. Kawasaki, Parametric study of thermal and chemical nonequilib-
[6] J. Wang, Fundamentals of erbium-doped fiber amplifiers arrays (Pe- rium nozzle flow, M.S. thesis, Dept. Electron. Eng., Osaka Univ.,
riodical styleSubmitted for publication), IEEE J. Quantum Electron., Osaka, Japan, 1993.
submitted for publication. [20] J. P. Wilkinson, Nonlinear resonant circuit devices (Patent style), U.S.
[7] C. J. Kaufman, Rocky Mountain Research Lab., Boulder, CO, private Patent 3 624 12, July 16, 1990.
communication, May 1995.
[8] Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, Electron spec-
troscopy studies on magneto-optical media and plastic substrate in-
terfaces(Translation Journals style), IEEE Transl. J. Magn.Jpn., vol. 2,
Aug. 1987, pp. 740741 [Dig. 9th Annu. Conf. Magnetics Japan, 1982,
p. 301].
[9] M. Young, The Techincal Writers Handbook. Mill Valley, CA: Uni-
versity Science, 1989.