Scribd
Upload
91 views2 pages

Operating and Safety

nORMAS P1427

Uploaded by

Ricardo Zapata
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
91 views2 pages

Operating and Safety

nORMAS P1427

Uploaded by

Ricardo Zapata
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

P1427

Submitter Email: [email protected]


Type of Project: Modify Existing Approved PAR
PAR Request Date: 20-May-2015
PAR Approval Date: 03-Sep-2015
PAR Expiration Date: 31-Dec-2015
Status: Modification to a Previously Approved PAR for the Revision of a Standard
Root PAR: P1427 Approved on: 10-Sep-2011
Root Project: 1427-2006

1.1 Project Number: P1427


1.2 Type of Document: Guide
1.3 Life Cycle: Full Use

2.1 Title: Guide for Recommended Electrical Clearances and Insulation Levels in Air Insulated Electrical Power Substations

3.1 Working Group: IEEE Guide for Recommended Electrical Clearances and Insulation Levels in Air Insulated Electrical Power Substations
(PE/SUB/WGD1)
Contact Information for Working Group Chair
Name: Hamid Sharifnia
Email Address: [email protected]
Phone: 503-813-6935
Contact Information for Working Group Vice-Chair
None

3.2 Sponsoring Society and Committee: IEEE Power and Energy Society/Substations (PE/SUB)
Contact Information for Sponsor Chair
Name: Markus Etter
Email Address: [email protected]
Phone: 732-932-6250
Contact Information for Standards Representative
Name: Hamid Sharifnia
Email Address: [email protected]
Phone: 503-813-6935

4.1 Type of Ballot: Individual


4.2 Expected Date of submission of draft to the IEEE-SA for Initial Sponsor Ballot: 03/2016
4.3 Projected Completion Date for Submittal to RevCom: 09/2016

5.1 Approximate number of people expected to be actively involved in the development of this project: 25
5.2 Scope: This guide, covering three-phase ac systems from 1 kV to Changes in scope: This guide, covering three-phase ac systems from 1
800 kV, provides recommended electrical kV to 800 kV, provides recommended electrical operating and safety
clearances and insulation levels in air-insulated electric supply clearances and insulation levels in air-insulated electric supply
substations; addresses insulation coordination procedures; provides substations; addresses insulation coordination procedures; provides
design procedures for the selection and coordination of the insulation design procedures for the selection and coordination of the insulation
levels within the station as they relate to substation clearances; and levels within the station as they relate to substation clearances; and
addresses how reduced clearances in high-voltage ac substations will addresses how reduced clearances in high-voltage ac substations will
allow for compact bus arrangements and substation voltage uprating allow for compact bus arrangements and substation voltage uprating
applications. applications. This guide addresses insulation coordination procedures,
This guide addresses insulation coordination procedures, including the including the choice of insulation levels and arrester specification, in
choice of insulation levels and arrester specification, in limited detail limited detail and only as relevant to clearance requirements. Detailed
and only as relevant to clearance requirements. Detailed and expanded and expanded coverage of insulation coordination procedures is
coverage of insulation coordination procedures is provided in other provided in other ANSI and IEEE guides and standards (see Clause 2).
ANSI and IEEE guides and standards (see Clause 2). This guide focuses on open-air bus assemblies and configurations and
This guide focuses on open-air bus assemblies and configurations and excludes apparatus clearances (i.e., bushing clearances for
excludes apparatus clearances (i.e., bushing clearances for transformers, and breakers). Detailed coverage of apparatus clearances
transformers, and breakers). Detailed coverage of apparatus clearances is provided in other applicable guides and standards.

1
is provided in other applicable guides and standards.

5.3 Is the completion of this standard dependent upon the completion of another standard: No
5.4 Purpose: Proper electrical clearances are necessary for the design, Changes in purpose: Proper electrical clearances are necessary for the
construction, and operation of electric supply substations. This design, construction, and operation of electric supply substations. This
document develops guidelines for the application of recommended document develops guidelines for the application of recommended
electrical clearances and insulation levels in air-insulated substations. electrical clearances and insulation levels in air-insulated
substations.The recommended clearances incorporate both
design/operating clearances and safety clearances.
5.5 Need for the Project: There is an error in one of the formula and also there is a typo which needs correction. We will examine the entire
guide also.

5.6 Stakeholders for the Standard: Utilities and consultant companies that are involve with designing high voltage substation.

Intellectual Property
6.1.a. Is the Sponsor aware of any copyright permissions needed for this project?: No
6.1.b. Is the Sponsor aware of possible registration activity related to this project?: No

7.1 Are there other standards or projects with a similar scope?: No


7.2 Joint Development
Is it the intent to develop this document jointly with another organization?: No

8.1 Additional Explanatory Notes (Item Number and Explanation): 5.2:IEEE 1313.2-1999: IEEE Guide for the Application of Insulation
Coordination
IEEE Std 1313.1TM-1996, IEEE Standard for Insulation Coordination

5.2: The operating and safety was removed from the scope, since the 1427 standard did not refer to it at all.

You might also like