Dipod 4M: The Dipod Rooftop System
Dipod 4M: The Dipod Rooftop System
Dipod 4M: The Dipod Rooftop System
Dipod 4M • Rev: A
DIPOD 4M
P/N: 1831
FLEXIBILITY
The dipodsystem is a system with the capability of handling all pos-
sible roof inclinations. The supports are bolted through the roof to en-
sure a firm anchoring. The antenna mounting tube is supported by two
stays to ensure stability.
QUALITY
The mounting tube and support tubes with brackets are made of ano-
dized aluminium. This gives the system excellent corrosion resistance
and a long life. A 3 mm EPDM rubber sheet is placed under the Sup-
ports to protect the roof.
EASY ASSEMBLY
The choice of materials makes the product very light which makes the
handling and installation very easy.
Sikeå 58 | SE-915 93 ROBERTSFORS | SWEDEN | Telephone: +46 934 153 10 | Fax: +46 934 150 72
[email protected] | www.cuedee.com
Product sheet • 1831
Dipod 4M • Rev: A
TECHNICAL INFORMATION
DIPOD 4M
ORDERING P/N FUNCTION DESCRIPTION
1831 Fixed mounted rooftop, typical for installation of panel antennas,
radio links or other common telecom equipment.
MECHANICAL DATA
Mounting tube: Ø90, L=4000 mm (Ø3,5, L=157 in) (Other dimensions available on request)
Support tubes: Ø75, L=3000 mm (Ø3, L=118 in)
Tubes: Aluminium, Nature anodized 20μm
Brackets: Aluminuim, Nature anodized 20μm
Ballast box frame: Galvanized steel
U-bolts: Acid proof stainless steel
Fasteners: Acid proof stainless steel
PERFORMANCE
INSTALLATION TYPE WIND SPEED MAX WIND
CD 823197: km/h m/s mph m2 ft2
Upper tie bar 2,4 m (94,5 in) above roof, 108 30 67 9,4 101
antenna load 1000 mm (39,5 in) above support 144 40 89,5 5,3 57
Max capacity of support. 162 45 100 4,2 45,2
ACCESSORIES
Cue Dee offers a wide range of brackets and tubes to all dipod systems.
Sikeå 58 | SE-915 93 ROBERTSFORS | SWEDEN | Telephone: +46 934 153 10 | Fax: +46 934 150 72
[email protected] | www.cuedee.com