ATVS55-915 - Instruction Manual

55” 4K Ultra High Definition
LED LCD Smart TV

Model Number: ATVS55-915
INSTRUCTION MANUAL
www.tempo.org
AUS 1300 886 649 Model: ATVS55-915 Product Code: 51896 10/2015
Welcome
Congratulations on choosing to buy a BAUHN® product. All products
brought to you by BAUHN® are manufactured to the highest standards
of performance and safety and, as part of our philosophy of customer
service and satisfaction, are backed by our comprehensive 1 Year
Warranty.
We hope you will enjoy using your purchase for many years to come.
AFTER SALES SUPPORT www.tempo.org

i
Remote Control
1 POWER: Set the unit on standby
mode; press it again to switch it on.
2 TV/RADIO: Select TV or Radio (DTV).
3 P-MODE: Switch the picture mode.
4 NUMBER BUTTONS (0-9): Select a TV
channel directly when watching TV. The
channel changes after 2 seconds.
5 MENU: Display the main menu; press
again to return to the previous menu
page.
6 SOURCE: Select the input source.
7 TITLE: Display the DVD title menu
(DVD*).
8 / / / : Press the RIGHT/LEFT
UP/DOWN buttons to navigate the on-
screen menus and adjust the system
settings to your preference. Press OK
to confirm your selection.
9 RETURN: Return to the previous
channel.
10 SMART HUB: Enter the Smart Hub
menu.
11 EXIT: Exit from the main TV menu
displayed on the screen. Display the
DVD title menu (DVD)*.
12 INFO: Display information of the current
program (DTV).
13 VOL +/-: Turn the volume up/down.
14 D-SETUP: Display the setup menu
(DVD)*.
15 : Load/unload a disc (DVD)*.
16 : Start or pause playing.
17 : Record program in DTV mode.
18 : Stop playing.
19 : In HbbTV mode,
press the colour buttons to access
HbbTV applications (FREEVIEWPLUS
catchup TV programs).
20 MUTE: Mute the sound. Press again to
restore the sound.
21 S-MODE: Switch the sound mode.
22 INDEX: Play the next file. Display the
record program list (DTV).
www.tempo.org
ii AUS 1300 886 649 Model: ATVS55-915 Product Code: 51896 10/2015
Remote Control (Cont.)
23 SUBTITLE: Enable/disable subtitles.**
24 FAV: Enter the favourite channels list.
25 EPG: Launch the Electronic Program
Guide (DTV).
26 CH. List: Press to play the next or
previous channel; press repeatedly to
scan through the channels.
27 CH+/-: Press to play the next or
previous channel; press repeatedly to
scan through the channels.
28 D.MENU: Display the disc menu
(DVD)*.
29 : Move fast forward.
30 : Move fast backward.
31 : Play the next file.
32 : Play the previous file.
NOTES:
* D
VD related functions are ineffective on
the ATVS55-915.
**Teletext or Austext is no longer available,
nor is there any plan for a replacement
teletext service in Australia. For more
information, please visit the websites of the
Australian channel providers.
However, one teletext option, “closed
captions”, is still working on most
Australian television channels. This service
allows you to activate subtitles while
watching normal television programs that
provide it.
www.tempo.org
iii AUS 1300 886 649 Model: ATVS55-915 Product Code: 51896 10/2015
There is a built-in keyboard on the back of the remote control for easy
operation (for Smart Hub).
IR Sensors
Tips:
• When using the QWERTY keyboard, do not cover the area where the IR
sensors are marked above.
• To enter UPPERCASE letters, press the ‘Caps’ button first, followed by the
chosen letter button.
• To enter the numbers and characters shown on the keys in yellow, press the
‘Alt’ button first, followed by the chosen letter button.
• The ‘Del’ button on the keyboard performs the backspace function.
• As an alternative to the remote control keyboard, you can use the on screen
keyboard.
www.tempo.org
AUS 1300 886 649 Model: ATVS55-915 Product Code: 51896 10/2015 iv
Using the Remote Control
To use the remote control, point it towards the remote Remote Control
sensor at the front of the TV.
Sensor
The remote control has a range of up to approximately five

metres (5m) from the TV at an angle of up to 30 degrees
each to the right and left of the sensor, as illustrated on the
right.
The remote control will not operate if its path is blocked.
NOTES:
• Do not drop, step on or otherwise impact the remote
control as this may damage the parts or lead to a
malfunction.
• The operating distance may vary according to the
brightness of the room.
• Do not point bright lights at the remote control sensor.
• Do not place objects between the remote control and the

remote control sensor.
• Do not use this remote control while simultaneously
operating a remote control of other devices.
Remote Control Preperation

• Install the batteries in the back of the remote control,
ensuring to match up the polarity markings (+/-).
• The batteries should last for around one year. The service
life of the batteries will depend on how often they are
used.
• If the remote control does not work when operated near
the TV, replace the batteries.
NOTE:
• Remove the batteries if the remote control is not going to
be used for a long time.
www.tempo.org
v AUS 1300 886 649 Model: ATVS55-915 Product Code: 51896 10/2015
55” 4K Ultra High Definition LED LCD Smart TV
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts
for a period o
f 12 months from the date of purchase. Defects that occur within
this warranty period, under normal use and care, will be repaired, replaced
or refundedat our discretion. The benefits conferred by this warranty are in
addition to all rights and remedies in respect of the product that the consumer
has under the Competition and Consumer Act 2010 and similar state and
territory laws.
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and to compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failuredoes not amount to a
major failure.
www.tempo.org
vi
Contents
Welcome i
Remote Control ii
Warranty Details vi
General Safety Instructions 1
Installation 5
Controls and Connections 7
Getting Started 14
Basic Operations 18
Electronic Program Guide (EPG) 20
Recording 21
Smart Hub 24
Media Mode 28
Menus 31
FAQs 53
Specifications 55
Repair and Refurbished Goods or Parts Notice 56
www.tempo.org
vii AUS 1300 886 649 Model: ATVS55-915 Product Code: 51896 10/2015
General Safety Instructions
Read this manual thoroughly before first use and keep it in a safe place for
future reference, along with the completed warranty card, purchase receipt
and carton. The safety precautions enclosed herein reduce the risk of fire,
electric shock and injury when correctly adhered to.
Follow all instructions and take notice of all the warnings.
The lightning flash with an arrowhead

symbol within an equilateral triangle is
intended to alert you to the presence
of non-insulated dangerous voltage
within the product’s enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within an equi-
lateral triangle is intended to alert you
To reduce the risk of electric shock, do not remove to the presence of important operating
the cover (or back). and maintenance (servicing) instruc-
This unit contains no user-serviceable parts inside. tions in the literature accompanying
Refer all servicing to qualified service personnel only. the product.
IMPORTANT WARNINGS AND CAUTIONS!

• Only connect this TV to a mains socket with a protective earthing connection.
• To prevent damage which may result in fire or an electric shock hazard, do not
expose this appliance to rain or moisture.
• Do not change or modify the appliance in any way.
• Only use the attachments/accessories specified by the manufacturer.
www.tempo.org
AUS 1300 886 649 Model: ATVS55-915 Product Code: 51896 10/2015 1
General Safety Instructions (Cont.)
Installation
Follow instructions: Only install this TV set in accordance with the instructions
in this manual. If a television is not positioned in a sufficiently stable location, it
can be potentially hazardous due to falling and can cause injury, particularly to
children.
• This TV is equipped with standard wall-mounting points, and we recommend
that a wall bracket be installed between the TV and the wall to prevent
the TV from falling from a cabinet. (The bracket is not included.)
• To prevent injuries from your television falling, take a few simple precautions:
• Do not place the TV on tall furniture (e.g., on a cupboard or bookcase)
without anchoring both the furniture and the TV to a suitable support.
• Only use furniture that can safely support the television.
• Ensure the TV is not overhanging the edge of the supporting furniture.
• Educate children about the dangers of climbing on furniture to reach TV
controls.
• Do not place the TV on cloth or other materials.
• When deciding on where to put the TV set, make sure the place is:
• Well ventilated, and away from damp and cold.
• Protected from overheating and away from direct sunlight.
• Away from moisture drips or splashes.
• Protected from excessive dust or grease.
• Bookcase: Do not install this equipment in a confined space such as a
bookcase or similar unit.
• Heat: Do not install the TV set near heat sources such as radiators, stoves
or other audio visual equipment (including amplifiers) that produce heat.
• Water: Do not place containers with liquids (such as vases) or with small
metallic objects on top of the unit. If liquid enters the unit or any metal
object falls into the unit, it may result in short-circuit, fire or electric shock.
• Fire or explosion: Do not use or store flammable or combustible materials
near the unit. Doing so may result in fire or explosion. Do not place any
naked flame sources, such as lit candles, cigarettes or incense sticks on
top of the TV set.
• Antenna: Install the antenna away from high-voltage power lines and
communication cables and make sure it is installed securely. If the antenna
touches a power line, contact with the antenna could result in fire, electric
shock or serious injury.
• Ventilation: Install the unit at an adequate distance from the wall to ensure
sufficient ventilation. If the temperature inside the unit rises, it may result in fire.
www.tempo.org
2 AUS 1300 886 649 Model: ATVS55-915 Product Code: 51896 10/2015
Electrical Safety and Cord Handling
• Voltage: Before installing this TV set, make sure your outlet voltage
corresponds to the voltage stated on the appliance rating label.
• Protect from moisture: To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture; do not use it anywhere near
water; do not touch the power plug with wet hands.
• Damage: Do not use a damaged power cord, plug or loose outlet. Doing so
may cause an electric shock.
• Power outlet: Do not plug several devices into the same outlet. Doing so
may cause the outlet to overheat and start a fire. Make sure the outlet is
readily accessible during operation of the equipment.
• Power plug: Make sure the plug is properly installed before inserting it fully
into the outlet. A loose or improperly inserted power plug may cause a fire.
• Protect the cord: Do not bend, twist or kink the power cord excessively.
Do not allow anything to rest on or roll over the power cord and antenna
cable. Doing so may cause a fire or an electric shock. Do not run the power
cord near heat-producing appliances such as radiators, stoves or irons. The
excessive heat could melt the insulation and expose live wires, resulting in
fire or electric shock.
• Disconnect: Always grasp the plug when disconnecting the power cord.
Pulling the cord can damage the internal wire and may cause a fire.
• Lightning storms: Unplug this TV during lightning storms or when unused
for long periods of time. Not doing so may result in fire or electric shock.
Usage Conditions and Restrictions
• Adjustments: Follow the instructions in this manual when installing and
adjusting the TV set. Only adjust those controls that are covered in this
manual, as improper adjustment of other controls may result in damage.
If this happens, unplug the TV set and have it serviced by appropriately
qualified personnel, or phone the after sales support line for advice.
• Ventilation: Do not cover the ventilation openings with items such as
newspapers, tablecloths, curtains etc. as this could impede ventilation.
• Cabinet slots: Do not insert objects of any kind into this unit through the
cabinet slots, as they could touch the current-carrying parts or short-circuit
parts, resulting in fire, electric shock or damage to the unit.
• Smoke or odour: If you notice any unusual odours or smoke around
the unit, immediately disconnect the unit from the outlet and contact the
service centre. Failure to do so may result in fire or electric shock.
www.tempo.org
• When not in use: When not using the unit for long periods of time,
disconnect the power cord from the wall outlet. Dust could accumulate
over time on the unit and cause it to generate heat and ignite, or deteriorate
insulation, which in turn may result in an electrical fire.
• Moving: When moving the unit, be sure to turn it off and unplug it from the
wall outlet. Moving the unit with the power cord connected to the outlet
may cause damage to the cord, resulting in fire or electric shock.
• Batteries: When removing the batteries from the remote control, make sure
to keep them out of reach of infants and children. Seek medical attention
immediately if a child has swallowed a battery.
• Usage restriction: This product is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of ex-
perience and knowledge, unless they have been given supervision or instruc-
tions concerning use of the product by a person responsible for their safety.
• Children: Supervise young children to ensure they do not play with the TV.
Cleaning and Maintenance
• Unplug: To reduce the risk of fire and electric shock, always unplug the TV
before cleaning.
• Cleaning: Only use a soft, dry cloth for cleaning the TV; do not use a damp
cloth. Never clean with industrial strength polish, wax, benzene, paint
thinner, air freshener, lubricant, detergent or other chemicals. Wipe off any
moisture, dirt or dust on the power plug pins with a clean, dry cloth.
• Repair: If the unit requires repair, contact the after sales support line; never
disassemble or modify the unit or attempt to service it yourself.
• Service: Refer all servicing to qualified service personnel. Servicing is
required when the TV has been damaged in any way, such as when the
power supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the TV, when the TV has been exposed to rain or moisture,
does not operate normally, or has been dropped.
www.tempo.org
Installation
Your TV is packaged with the two stand legs separate from the cabinet.
Before using the TV, install the stand as described below, or if you want to
mount it to a wall, see page 6 for mounting advice; the wall mount itself is not
supplied.
IMPORTANT!
• Make sure the TV set is unplugged from the power supply before
installing or removing the stand.
• The TV panel may be awkward to install on your own. We recommend
you ask someone to help with installation and/or removal of the stand.
Attaching the Stand

Step 1
Place a soft cushioned material on top
of a flat surface to prevent damaging the
screen panel. Then place the TV screen
flat on top, with the screen side facing
down, as illustrated on the right (1).
Step 2
Note the L and R markings and the
arrow (pointed towards the front of
the TV) on the stand legs. Align the
stand leg to the installation point, as
illustrated on the right (2).
Step 3
Tighten the screws (supplied) with a
screwdriver to affix the stand to the
panel, as illustrated on the right (3).

CAUTION!
• Do not apply excessive force as this may damage the screw holes.
• Unplug the power plug first when installing or removing the TV Stand.
• To avoid any damage to this TV, we recommend you ask someone to
help with installation and/or removal of the stand.
www.tempo.org
Installation (Cont.)
Wall-Mounting Instructions
IMPORTANT!
• Make sure the TV set is unplugged from the power supply before
removing the stand and mounting it to a wall.
• We recommend you contact a professional for assistance when wall-
mounting the TV. We assume no liability for any damage to the product or
injury to yourself if you mount the TV.
• The TV set is equipped with holes on the back panel for use with wall-
mounting brackets (not included). Please use the illustration below as a
reference when buying wall-mounting brackets.
• Use four standard M6*10mm screws (or longer, depending on the mounting
bracket) to mount this TV.
Back of the TV
NOTE: T
he screws in the package are for securing the TV stand only.
If you are wall-mounting the TV, please consult a professional
installer for further instructions on bracket support and wall
support.
www.tempo.org
Controls and Connections
Front View Back View

1
3 4 5 6 7
1. LCD Display Screen

2. IR (infra-red) Sensor for Remote Control
Power Indicator: In standby mode the indicator light is red; when
switching on the unit the indicator light will illuminate blue.
3. VOL + / - : Increase/decrease the volume level or move left/right.
4. CH + / - : Select the next/previous channel or move up/down.
5. MENU: Enter the settings menu.
6. SOURCE: Select the input source.
7. STANDBY: Turn the TV on/off.
NOTE: S
ee next page for a detailed description of all the sockets on the back
panel.
www.tempo.org
Controls and Connections (Cont.)
Main Unit Back View Controls and Sockets

11
10
1 2 3 4 5 6
1 POWER CABLE
2 LAN INPUT (Local-Area Network): For connecting to the internet.
3 USB INPUT: Connect a USB storage device for PVR recording and
multimedia file playback.
4 VIDEO INPUT (COMPOSITE): Supports SD picture quality connections.
5 ANTENNA INPUT: For connection of the external antenna.
6 COAXIAL S/PDIF OUTPUT: Connect to an external digital audio device.
7 OPTICAL S/PDIF OUTPUT: Connect to an external digital audio device.
8 HEADPHONES OUTPUT
9 MINI Y/Pb/Pr INPUT (COMPONENT): Supports both SD (Standard
Definition) and HD (High Definition) picture quality.
10 MINI VIDEO INPUT (COMPOSITE): Supports SD picture quality
connections.
11 HDMI INPUTS: Provides an all digital video/audio connection between
the TV and any HDMI devices, such as a DVD player, gaming console or
A/V receiver.
www.tempo.org
IMPORTANT!
Read through the instructions before connecting the TV to other
equipment.
Connecting to an AC Power Source
Main Unit

To Power Outlet
Connecting an External Antenna

For the best picture quality, we recommend connecting the TV set to an
external antenna. Antenna
Outdoor
antenna
Indoor amplifier
antenna
amplifier 75Ω antenna
plug goes into
Power plug the antenna
of antenna port in the
amplifier back of your
TV
www.tempo.org
Composite Video (CVBS) Connection - AV IN 1
AV Cable
(not included)
For basic connection, use the
composite Audio L/R (white/
red) and CVBS (yellow) cable
to connect the unit with other
devices.
Composite Video (CVBS) Connection - AV IN 2
Connect the Mini AV cable (supplied) to the

AV IN 2 socket. Then connect the other end to
your external device.
NOTE: Mini AV cable’s L/R audio connections are shared between Y/Pb/Pr
as well.
www.tempo.org
HDMI Connection
HDMI Cable
(not included)
Use a HDMI cable to connect the

unit with other devices to receive
high-definition multimedia signal.
USB Connection
Insert a USB memory device into the USB port for PVR recording,
time-shifting and playback of video/music/photo multimedia files.
USB Device
(not included)
www.tempo.org
Component (YPbPr) Connection
YPbPr Adapter
Cable
(included)
Mini AV Cable
YPbPr (included)
Component
Cable
(not included)
• Your TV contains a mini YPbPr terminal. You will need to use the special
adapter cable (supplied) with a 3.5mm head on one end and 3 female RCA
terminals on the other end to connect the TV with external devices.
• Then use a YPbPr component cable (not supplied) complete with green,
blue and red terminals to connect to your external device.
• For sound, first connect the Mini AV cable (supplied) to the AV IN 2 socket.
Then connect the white and red jacks on the other end to your external
device.

YPbPr Adapter
Cable
(included)
www.tempo.org
Internet Connection
LAN Cable
(not included) Use a RJ45 LAN cable (not included) to connect this
TV with available network.
Earphone Connection
Earphone Cable
(not included)
Coaxial (S/PDIF) Connection
Use a coaxial cable to connect the unit with an amplifier or other

audio decoding device for coaxial audio signal output.
(Coaxial cable is not included.)
www.tempo.org
Getting Started
IMPORTANT! Make sure all relevant equipment is properly connected (as
illustrated on the previous pages) before connecting the unit
to a wall socket and turning on the power.
Powering the TV
To turn the power on or off:
• Plug the power cord into a suitable power outlet, then turn on the power at
the outlet.
• Press the POWER button, on the right lower side of the back panel (or on
the remote control, making sure to aim it at the sensor at the front of the
TV); the indicator light will glow blue. Press it again to power off (standby
mode); the indicator light will glow red.
Installation Guide
When you switch on the TV for the first time, the First Time Setup menu will be
displayed on the screen, as illustrated below.
Step One:
OSD Language: Use the / buttons to select your OSD language and then
press the OK button to go to the next step.
www.tempo.org
Getting Started (Cont.)
Step Two:
Country: Use the / buttons to select the country you are living in and then
press the OK button to go to the next step. Press the MENU button to go to
the previous step.
Step Three:
Environment: Use the / buttons to select the environment of your new TV
and then press the OK button to go to the next step. Press the MENU button
to go to the previous step.
www.tempo.org
Step Four:
Network: Select Start and press OK to begin the network setup. Press the
button to select Skip and press OK to cancel the network setup and move
to the next step. Press the MENU button to go to the previous step. You
can configure the network settings later via the TV’s menu. See page 38 for
detailed network setup instructions.
Step Five:
Tuner: Use the / buttons to select the type of scan (DTV+ATV, ATV, DTV ) and
then press the OK button to go to the next step. Press the MENU button to
go to the previous step.
www.tempo.org
Step Six:
The settings confirmation page will be displayed on the screen, as illustrated
below. Press the MENU button to go back to previous steps. Press the OK
button to begin scanning for TV stations. To exit channel tuning, press the
EXIT button. When auto searching is complete, your TV will show the first
channel found.
www.tempo.org
Basic Operations
Selecting an Input Source
• Press the SOURCE button at the lower-right side of the back panel, or on the
remote control, to display the input source list.
• Press the / buttons to select the desired input source, and then press OK to
confirm your selection from the following options: DTV, ATV, AV1, AV2,YPbPr,
HDMI1, HDMI2, HDMI3, MEDIA.
NOTE: W hen you switch on this TV for the first time, you need to go through
the first time installation and auto-search for all the DTV programs in
your area.
Channel Selection
• Press the CH+/- button to select the next/previous channel.
• Alternatively, press the number buttons to select a channel directly.
Volume Control
• Press the VOL+/- button to adjust the volume level.
• Press the MUTE button to mute the sound, press it again to restore sound.
Picture and Sound Mode

• Press the P-MODE button on the remote control repeatedly to select
the picture mode directly (available options: Standard, Movie, User, Eco,
Dynamic).
• Press the S-MODE button on the remote control repeatedly to select the
sound mode directly (available options: Standard, Music, Movie, Sports,
User).
Information Display
• Press the INFO button to display information about the current program.
www.tempo.org
Basic Operations (Cont.)
Favourites List
• While viewing a channel, press the FAV
button on the remote control to enter the
Favourites List menu.
• Press the / buttons to select the channel
and press OK to watch it.
• To add a channel to the Favourites List, go
to SMART HUB > select ‘Channels’ and
press OK > Select ‘Program Edit’ and press
OK. Press the / buttons to select a channel
and press the FAV button.
• Press the FAV button again to remove a
favourite channel from the list.
Quick Select
• While viewing a channel, press the CH.LIST
button to enter the Channel List directly.
• Press the / buttons to select the channel
and press OK to watch it.
TV/Radio (for DTV mode only)

• Press the TV/RADIO button on the remote
control to switch the unit between TV and
Radio mode.
Subtitles
• Press the SUBTITLE button on the remote
control to enter the subtitle menu.
NOTE: T he program you are watching must
support subtitles.
www.tempo.org
Electronic Program Guide (EPG)
EPG TV Guide (for DTV mode only)
EPG stands for Electronic Program Guide. It is supplied by the program
providers and offers information about the programs to be broadcast. You can
access it in digital mode by pressing the EPG button on the remote control.
• Press the EPG button to display the EPG interface (above). The area at the
top will display information about the selected program or channel, and the
columns below will display the list of available channels and their programs
at various time slots.
• Before you can view any EPG information, you have to ‘activate’ each
channel for which you want to view program information. To do this, press the
/ buttons to select a channel in the left column, then press OK to confirm.
• Press the / buttons to switch between columns.

• Press the / buttons to select a different channel/program in the list and
press OK to activate the channel.
• Press the button to display the TV guide of the previous day.
• Press the button to display the TV guide of the next day.
• Press the YELLOW button to enter the schedule list page.
• Press the GREEN button to schedule a reminder for the selected
program.
• Press the or RECORD button to schedule a recording for the selected
program.
• Press the INFO button to display full program information.
• Press EXIT to exit the EPG menu.
www.tempo.org
Recording
IMPORTANT!
Before you can record with this TV set (including time-shift recording), you
must have inserted a FAT32 formatted USB storage device into the USB port.
USB storage devices do not come with TV.
• First, insert your USB memory device into the USB port.
When Watching a Program in DTV Mode:

• Press the RECORD button on the remote control to start recording
directly. Press the button to minimize the information bar at the bottom of
the screen. Press the RECORD button again to display information about
the current recording.
• Press the STOP button to display a dialogue box: select Yes to stop
recording, select No to dismiss the dialogue box.
To Watch a Recorded Program:
• Press the INDEX button on the remote control to display the PVR Settings
page. (Alternatively, go to MENU > PVR > RECORDED LIST.)
• Use the / buttons to select a recorded file and press OK to start playback
in full screen mode.
Scheduled Recording (in DTV mode only)

See the instructions under EPG on the previous page.
www.tempo.org
Recording (Cont.)
Time-Shift Recording and Playback (in DTV mode only)
IMPORTANT!
Before you can record with this TV set (including time-shift recording), you
must have inserted a FAT32 formatted USB storage device into the USB port.
USB storage devices do not come with TV
The time-shift function allows you to pause the live TV signal, then resume
playback at your convenience.
• First, insert your USB memory device into the USB port.
When Watching a Program in DTV Mode:

• Press the button on the remote control to initiate time-shift mode and
pause the program; the tool bar pictured below will appear on the screen.
• Press the button again to resume playback.
• Use the / buttons, then press OK to select a function such as Fast

Forward from the on-screen tool bar.
• To stop time-shift, press the STOP button on the remote control to
display a dialogue box, then select Yes to exit time-shift mode and return to
live TV signal, or select No to dismiss the dialogue box.
NOTE: T
he USB storage device will not retain recorded data after exiting the
time-shift function.
www.tempo.org
Recording (Cont.)
Important Notes
When using the USB/Media function, remember the following important points:
• We strongly recommend you back up all data in the USB storage device
to another storage device so you do not risk losing any data in case of an
unexpected device failure or accident. We do not assume liability for any
loss of data due to misuse or malfunction. Data backup is your personal
responsibility.
• You cannot change to another channel or select another function while in
recording mode.
• If the signal is interrupted or removed while in recording mode, the
recording will stop until the signal is established. This may cause you to
lose program content.
• The file recorded can only be used in this TV. Do not copy it to any other
device.
• When you are in time-shift recording mode, you may experience some
difficulty with a scheduled recording at different times without removing
the USB recording device. You will need to remove the USB device as it is
required to reset after each recording to protect the device from damage.
If you see the message ‘DISK NOT READY’ displayed, remove the device,
reconnect it, and proceed with your recording.
• Some USB storage devices may not be compatible for smooth operation
with this TV.
• For large file sizes and large capacity storage devices, the loading speed
may be longer. The recognition speed of a USB storage device may vary
depending on the device.
• When connecting or disconnecting the USB storage device, ensure the TV
is not in USB mode, otherwise the USB device or the files stored in it may
be damaged.
• Only use a USB storage device formatted in a FAT32 file system provided
with the Windows operating system. If it is formatted by a different utility
program that is not supported by Windows, it may not be recognised.
• Ensure any USB devices connected to the TV do not use/exceed 500mA
power rating.
• If an “Unsupported File” message is displayed, the file format or codec is
unsupported or corrupted.
www.tempo.org
Smart Hub
Press the SMART HUB key on the remote control. Here you can run the apps
installed and access input sources and menu options. Press the / / /
buttons to select these functions.
Applications
Input Source
Options
Quick Links User Settings
Smart TV Applications Input Source Options

• Web Browser • DTV
• YouTube • ATV
• Facebook • AV1
• Twitter • AV2
• Picasa • YPbPr
• AccuWeather • HDMI 1/2/3
• TerraTV • USB (MEDIA)
• Miracast
• DLNA
www.tempo.org
Smart Hub
Quick Links
1. Recording: Access the list of recorded programs (USB hard disk must be
connected).
2. Video: Access the video player in MEDIA mode.
3. Photo: Access the photo player in MEDIA mode.
4. Music: Access the music player in MEDIA mode.
5. Channels List: Access the channel list.
6. EPG: Access the Electronic Program Guide (EPG).
7. Settings: Access the TV general settings menu.
8. Picture: Access the picture menu settings.
9. Sound: Access the sound menu settings.
10. Channels: Access the TV channels menu settings.
Miracast
The Miracast feature enables you to echo the display from a compatible
device like a smartphone or tablet on the TV screen by connecting your
mobile device directly to the TV wirelessly. In order to use this feature, your
device must support Wi-Fi Display technology.
• To start using the Miracast feature, go to SMART HUB and press OK on
Miracast.
• Turn on the Wi-Fi on your smartphone or tablet. (Refer to your device’s
user manual for information on how to turn on Wi-Fi.)
• Your mobile device will display a list of available devices. Choose ‘My TV’
then click on it to connect. If the mobile device prompts for a password,
enter BAUHN.
• Your mobile device will connect to the TV and will display the device
screen on the TV.
www.tempo.org
Smart Hub
Hyperlink
The Hyperlink feature allows you to share media files on your DLNA-enabled
media PC, smart phone or tablet on the TV.
• In order to use this function, your shared media PC or smart device and
the TV must be connected to the same local network. Also your device
must have built-in media share capability or have a third-party DLNA/UPnP
media server installed.
• To start using the Hyperlink feature, start the DLNA/UPnP media server on
your device.
• Start the Hyperlink application on the TV from the SMART HUB page.
• Your TV will automatically connect to the shared media device. To choose
a different device, press the RED button. A list of available devices will be
displayed.
• Select your preferred media device from the list and press OK.
• Then select from either Movie, Music or Photo and press OK to enter it.
You will only see supported media files under each category.
• Select the files you want to play and press the PLAY button.
www.tempo.org
Smart Hub (Cont.)
FreeviewPlus
FreeviewPlus is a new service provided by Freeview Australia, which
provides a state of the art Electronic Program Guide (EPG) and seamless
access to catch-up TV across the free-to-air networks. FreeviewPlus uses
HbbTV technology which combines broadcast and broadband. An internet
connection and an aerial are required. Data usage charges and conditions
apply.
Once you’re connected to the internet, press the:
• GREEN button on your remote to launch FreeviewPlus.
•RED button on your remote to launch broadcast network content and
services.
Then follow the on-screen instructions to navigate through the applications.
NOTE:
• Catch Up TV provided by the Freeview networks may vary by region. Please
go to www.freeview.com.au/freeviewplus/check-services/ to check the
availability of services in your area.
• Your home network must have broadband Internet access. Contact your
Internet Service Provider (ISP) if you have problems maintaining a fast
connection that is reliable.
• Accessing Internet content may incur access or data fees from third parties
such as your ISP.
• Since all content is downloaded over the internet, there may be a delay in
loading the content.
• If any of your other network connected devices such as computers,
gaming consoles and network hard drives are transferring large amounts
of data across your network (such as a file transfer, online gaming, or other
instances of video streaming), loading times of interactive applications,
sound and picture quality may be compromised.
To turn off FreeviewPlus, go to SMART HUB > CHANNELS and set the
HbbTV setting to OFF.
www.tempo.org
Media Mode
Media Playback
• First insert a USB memory device into the USB port.
• Press the SOURCE button on the back panel, or on the remote control, to
switch the unit to MEDIA mode.
• Press the / / / buttons to move the cursor.
• Press the EXIT button to return to the previous menu page.
• Press the RED button to change the device.
Photo
• Press the / buttons to select Photo in the main menu, then press OK to
enter it. Photo files can only be played in this menu category.
• Use the / / / buttons to select the desired folder or file, then press
OK to select files and press button to play files in full screen.
When Playing Photo Files:
• Press the MENU button on the remote control to hide/display the on-screen
tool bar.
• Use the / keys, then press OK to select a function such as Previous,
Next, Rotate and Enlarge from the on-screen tool bar.
• Press the STOP or EXIT buttons to exit playback & go back to file list page.
www.tempo.org
Media Mode (Cont.)
Music
• Press the / buttons to select Music in the main menu, then press OK to
enter it. Music files can only be played in this menu category.
• Use the / / / buttons to navigate to the desired folder or file, then
press OK to select and press the PLAY button for playback.
When Playing Music Files:

• Use the / buttons, then press OK to select your desired function. The
functions available are: Previous, Next, Rewind, Fast Forward, Pause, Stop,
S.Mode, Repeat, Playlist and Info.
www.tempo.org
Media Mode (Cont.)
Movie
• Press the / buttons to select Movie in the menu, then press OK to enter.
Movie files can only be played in this menu category.
• Use the / / / buttons to navigate to the folder or file, then press OK
to select and press the PLAY button for playback.
When Playing Movie Files:

• Press the MENU button on the remote control to hide/display the tool bar.
• Press the / buttons to select the preferred function, then press OK to
confirm.
Remote Operations when Playing Multimedia Files:
• Press the button to play or pause playing.
• Press the button to stop playing.
• Press the button to move fast backward.
• Press the button to move fast forward.
• Press the button to play the previous file.
• Press the button to play the next file.
NOTE: T o play your multimedia files, make sure you have selected the correct
icon in the main media playback menu.
www.tempo.org
Menus
This TV set contains different settings menus where you can program your
preferred settings. Once you have programmed any settings, the unit will
retain them in its memory until you change them, even when switching the
unit to standby mode. This means you can always operate the system under
the same conditions.
Menu Navigation
• Press the MENU button on the back panel, or on the remote control, to
display the main menu.
• Press the / buttons to select different sub-menus.
• Press OK or to enter the sub-menu page.
• Press the / buttons to select the preferred option.
• Press the / buttons to adjust the value.
• Press the MENU button to return to the previous menu page.
• Press the EXIT button to exit the menu page.
www.tempo.org
Menus (Cont.)
Time
Item Support Mode Explanation

Clock Hour : Min It shows the current time information.
Off Time Off > Once > Everyday Set Off time. You can set the Hour
> Mon-Fri > Mon-Sat > and Minute.
Sat-Sun > Sunday
On Time Off > Once > Everyday Set On time. You can set Hour,
> Mon-Fri > Mon-Sat > Minute, Source, Channel, Volume.
Sat-Sun > Sunday
Sleep Off > 10min Set the timer in Minutes for when you
Timer > 20min would like the TV to power off.
> 30min
> 60min
> 90min
> 120min
> 180min
> 240min
www.tempo.org
Menus (Cont.)
Auto On/Off TV will go into standby in 10min if
Sleep there is no signal coming in or no
operation. In “PC” mode, auto sleep
timer is 1 minute.
Time Zone Select your time zone.
No Action Off > 1hour > 2hour > TV will go into Standby if there is no
Auto 3hour operation.
Sleep
Daylight On/Off Option to turn daylight saving time On
Saving or Off.
Time
www.tempo.org
Menus (Cont.)
Lock

Lock On/off A password is required to enter the
System sub-menu. The password default is
0000.
Set Set personal password.
Password
Lock Press green (LOCK), then the lock
Channel icon will appear on selected channel,
and the channel is locked.
Parental No block Set parental guidance.
Guidance Block G and above
Block PG and above
Block M and above
Block MA and above
Block AV and above
Block R and above
Block all
www.tempo.org
Menus (Cont.)
Hotel Lock Hotel lock Turn Hotel lock function on/off.
Lock sources Turn off the input sources.
Default sources Set default the source.
Max volume Set maximum the volume level.
Default volume Set default the volume level.
Default channel Set default channel when the default
source is set to DTV.
Export settings Export all hotel lock settings to a USB
drive.
Import settings Import all hotel lock settings from a
USB drive.
Lock Turn on/off the functionalities of the
Keypad keypad on rear panel.
www.tempo.org
Menus (Cont.)
Option

OSD Language English, Spanish, French, Select the On Screen Display
Italian, Portuguese, (OSD) language.
German
Primary Audio Select the primary audio
Language language (only available in
DTV mode).
Secondary Select the secondary audio
Audio language (only available in
Language DTV mode).
Primary Select the primary subtitle
Subtitle language (only available
Language in DTV mode and must
be supported by viewing
program).
Secondary Select the primary subtitle
Subtitle language (only available
Language in DTV mode and must
be supported by viewing
program).
www.tempo.org
Menus (Cont.)
Hearing On/Off
Impaired
HDMI CEC HDMI CEC / Auto / Off
ARC
Restore to Reset all settings to factory
Default defaults.
PC Setting
NOTE: The PC connectivity option is not available in ATVS55-915.
If you are not connected to a PC, the following settings will be inactive. Once
you are connected to your PC, the following information above will appear:：
Item Support Mode

Auto Adjust
Horizontal Pos. 0-100
Vertical Pos. 0-100
Size 0-100
Phase 0-100
www.tempo.org
Menus (Cont.)
Network Settings
For a stable internet connection, it is recommended that you use a wired
connection or place the wireless router close to the TV.
Wired
For a Wired network connection, make sure to connect the TV to your Internet
router using an RJ45 Ethernet cable before starting the setup process.
Press the / buttons and select “Wired” network type. Then press to
highlight “Wired”, next press OK and the bellow screen will appear.
www.tempo.org
Menus (Cont.)
Internal Manual / Auto Manually set the IP
Protocol Setup information of the wireless
network or automatically
acquire IP information of
wireless network.
IP xxx.xxx.xxx.xxx Under “Manual” setup enter
the IP address using the
numerical keypad.
Netmask xxx.xxx.xxx.xxx Under “Manual” setup, enter
the Netmask address using
the numerical Keypad.
Getaway xxx.xxx.xxx.xxx Under “Manual” setup enter
the Gateway address using
the numerical keypad.
DNS xxx.xxx.xxx.xxx Under “Manual” Setup enter
the DNS address using the
numerical keypad.
MAC Address ---- MAC address of the TV.
Press OK to save the settings. If the connection is successful, the ‘Wired

network is connected’ message will appear. Press the EXIT button to exit the
menu.
If the connection is unsuccessful, the ‘Wired network is not connected’
message will appear. Check the accuracy of information you have entered
and try again.
www.tempo.org
Menus (Cont.)
Wi-Fi
For ‘Wi-Fi Network Connection’, make sure to place your Wi-Fi router close
to the TV.
Press the / buttons and select ‘Wi-Fi’ network type. Then press to
highlight ‘Wi-Fi’. Press OK and below screen will appear.
www.tempo.org
Menus (Cont.)
The TV will automatically begin searching for nearby Wi-Fi Access Points
(WAP). This may take up to 2 minutes. If your WAP doesn’t appear, move your
Wi-Fi router closer to the TV and press the GREEN button to search
again.
Select the WAP you wish to use by pressing the / buttons. To view detailed
information, press the YELLOW button.
After selecting the WAP, press OK. If the WAP has a security password, enter
the password using the on-screen keypad, and then press CONNECT.
www.tempo.org
Menus (Cont.)
If the connection is successful, the ‘Connected to Internet!’ message will
appear. Press OK to exit.
If the connection is unsuccessful, click the security password of your WAP
and its security protocol settings and try again.
www.tempo.org
Menus (Cont.)
For advanced ‘Wi-Fi Network’ settings, navigate to MENU > NETWORK
SETTINGS > Wi-Fi > SELECT YOUR WAP (you must be successfully
connected), and press the BLUE button. The following screen will
appear.

Internal Manual / Auto Manually set the IP
Protocol Setup information of the wireless
network or automatically
acquire IP information of
wireless network.
IP xxx.xxx.xxx.xxx Under “Manual” setup enter
the IP address using the
numerical keypad.
Netmask xxx.xxx.xxx.xxx Under “Manual” setup, enter
the Netmask address using
the numerical Keypad.
Getaway xxx.xxx.xxx.xxx Under “Manual” setup enter
the Gateway address using
the numerical keypad.
DNS xxx.xxx.xxx.xxx Under “Manual” Setup enter
the DNS address using the
numerical keypad.
MAC Address ---- MAC address of the TV.
• Press OK to save the settings. Enter the WAP password correctly using the
on-screen keypad and press connect. Press OK to exit.
www.tempo.org
Menus (Cont.)
PVR Menu Settings
• Recorded List: Shows the list of recorded programs (you can also use the
INDEX key on the remote to access this page).
• Record: Schedule a program to be recorded.
www.tempo.org
Menus (Cont.)
• Reminder: Schedule a reminder to watch your favourite programs.
• Schedule List: Shows the list of programs scheduled to be recorded.
• PVR File System
Select Disk
If you have multiple partitions on your disk, select the partition you wish
to use.
www.tempo.org
Menus (Cont.)
• Time Shift Size
Press the / buttons and change the size of the time-shift buffer.
• Format Start
Press OK and confirm to format your USB drive.

• Speed Check
Press OK to check the speed of the USB drive.
www.tempo.org
Menus (Cont.)
Channel Menu Settings
To access the Channel menu, navigate to SMART HUB > CHANNELS.：From
this menu you can access the following options: Auto Tuning, DTV Channel
Tuning, ATV Channel Tuning, TV Guide, Program Edit, Signal Information and
Software Update (USB).
Auto Tuning
Press OK to enter. Then select your Country, Tuner Type, Logical Channel
Number (LCN default is on) and press OK to start scanning.
www.tempo.org
Menus (Cont.)
DTV Channel Tuning
Press OK to enter. Press the / buttons to select the channel. Press OK to
start scanning.
www.tempo.org
Menus (Cont.)
Program Edit
Press OK to enter.
• Press the RED button to delete a channel from the channel list and EPG.
• Press the BLUE button to skip a channel when using CH+/- buttons.
• Press the FAV button to add a channel to your Favourites List; press the
button again to remove from the Favourites List.
HbbTV
• Turn ON/OFF HbbTV.
NOTE: If you do not wish to view FREEVIEWPLUS interactive applications,

turn off HbbTV.
www.tempo.org
Menus (Cont.)
Signal Information
This item is used to display signal details such as Channel Number,
Frequency, Quality and Strength.
Software Update (USB)

• This item is used to update software through a USB memory device.
• Visit the following web page to check for software updates that keep your
TV up-to-date:
http://www.tempoaustralia.com/sw/ATVS55-915/update.html
www.tempo.org
Menus (Cont.)
Settings
Picture Menu Settings
To access the Picture menu, navigate to SMART HUB > PICTURE.

Picture Mode Auto > 4:3 > 16:9 > Picture mode selection.
Zoom 1 > Wide Zoom > When “user setting”
Panorama is selected, Contrast,
Brightness, Colour and
Sharpness settings can be
adjusted.
Aspect Ratio Natural > Warm > Cool Colour Temperature
selection.
Noise Off > Low > Middle > High Picture noise reduction
Reduction settings.
www.tempo.org
Menus (Cont.)
Sound
To access the Sound menu, go to SMART HUB > SOUND.

Sound Mode Standard > Music When “User” setting is selected, you
> Movie > Sports > can adjust the EQ settings as well as
User the Treble and Bass settings.
Balance (-)50 - (+)50 Adjust the audio output between left
and right speakers.
Auto Volume On/Off Auto volume On/Off.
Surround On/Off Turn Surround Sound simulation On/
Sound Off.
AD Switch On/Off Audio Description for visual
(Audio presentation works only with
Description) programs that contain related
narration information (for people with
vision impairments).
AD Volume 0-100 Only when AD switch is set ON, can
it be adjusted.
S/PDIF Mode PCM/Auto Select the digital audio output type.
Audio Displays the audio codec
Language information for the current program.
www.tempo.org
FAQs
If you experience any problems with your TV, check the list below and take
any necessary steps before calling for service. If none of the solutions help
you solve the problem, turn the power off and contact the after sales support
line for advice.
General Problems with the TV Set
Problem Solution
No power. Insert the power plug securely into the power outlet
and ensure the power outlet is switched on.
No picture. Ensure that the equipment is connected properly.
• Adjust the antenna or use an external antenna.
• Relocate the unit near a window (if inside a
building).
• Move the TV set away from any product that
causes interference.
• Auto-tune the unit again.
• Try another channel.
No sound or • Ensure that the equipment is connected properly.
distorted sound. • Ensure that the input setting for the TV is correct.
• Ensure the audio settings are properly set.
• Ensure the volume is not muted. If it is, press the
MUTE button to restore the sound.
• If earphones are connected, unplug them.
• Adjust the volume to a suitable level by pressing
the VOL+/VOL- button.
No operations can be • Check the batteries are correctly installed.
performed with the • The batteries may be exhausted: replace them.
remote control unit. • Make sure to point the remote control at the
remote control sensor and try it again.
• Make sure to use the remote control at a distance
of no more than 6m from the sensor.
• Remove any obstacles between the remote control
and remote control sensor.
No key operation (by Disconnect the power plug and then reconnect
the main unit and/or it. (The unit may not be operating properly due to
the remote control) is lightning, static electricity or some other factors.)
effective.
www.tempo.org
FAQs (Cont.)
Noise or other Electronic equipment near the unit is causing interface.
interface Relocate the unit or move the equipment.
Problems Relating to the USB Device

Problem Solution
My TV does not Please refer first to the instructions describing how
recognise my USB to use USB devices with this unit.
device or my external If the problem still occurs, your device may not be
hard disk. compatible. This machine has been tested with
the majority of Flash memory-based devices and
hard disks (Music/Movie players with HDD) on the
market; however, it may not be compatible with
certain devices, in particular external self-powered
hard disks.
www.tempo.org
Specifications
55’’ (139cm) 4K Ultra High Definition LED LCD
Screen Size
Smart TV
Resolution 3840 x 2160
Panels Native
60Hz
Refresh Rate
Luminance 250 cd/m2
Contrast Ratio 4500:1
Viewing Angle H:176 / V:176
Aspect Ratio 16:9
Audio Output Power 2 × 10W
HDMI Version 2.0
Movie AVI, MPEG, MPEG-4, TS, MKV, RMVB
USB Multimedia Music MP3, WAV, AAC

Playback Format Photo JPG/JPEG
Text TXT
USB Disk Size Maximum 1TB
USB File Format FAT32
Power Input AC 100-240V, 50/60Hz
Power Consumption <130W
With stand: 1244 × 310 × 773 mm (w x d x h)
Dimensions
Without stand: 1244 × 83 × 719 mm (w x d x h)
With stand: 15.95 kg
Weight
Without stand: 15.51 kg
www.tempo.org
55” 4K Ultra High Definition LED LCD Smart TV
Repair and Refurbished

Goods or Parts Notice
Unfortunately, from time to time, faulty products are manufactured which need to be
returned to the supplier for repair.
Please be aware that if your product is capable of retaining user-generated data
(such as files stored on a computer hard drive, telephone numbers stored on a
mobile telephone, songs stored on a portable media player, games saved on a games
console or files stored on a USB memory stick) during the process of repair, some or
all of your stored data may be lost. We recommend you save this data elsewhere
prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them
with refurbished goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used
where they meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate
your complaint. Please telephone us on 1300 886 649 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO BOX 6056 Frenchs Forest, Sydney, Australia NSW 2086
Tempo Help Desk: 1300 886 649 (Aust)
(Operating Hours: Mon-Fri 08:30AM to 06:00PM EST)
Email: [email protected]
www.tempo.org
56
This page has been left blank intentionally.
www.tempo.org
www.tempo.org
www.tempo.org
Software Updates
Visit the following web page to check for softwares updates to
keep your TV up-to-date.
http://www.tempoaustralia.com/sw/ATVS55-915/update.html
Warranty returns
Should you for any reason need to return this product
for a warranty claim, make sure to include all accessories
with the product.
Product does not work?

If you encounter problems with this product, or if it fails
to perform to your expectations, make sure to contact
our After Sales Support Centre on 1300 886 649 before
returning it to the store for a refund.
www.tempo.org

ATVS55-915 - Instruction Manual

Uploaded by

Copyright:

Available Formats

ATVS55-915 - Instruction Manual

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ATVS55-915 - Instruction Manual

Uploaded by

Copyright:

Available Formats

55” 4K Ultra High Definition

LED LCD Smart TV

AFTER SALES SUPPORT www.tempo.org

The remote control has a range of up to approximately five

• Do not place objects between the remote control and the

Remote Control Preperation

The lightning flash with an arrowhead

IMPORTANT WARNINGS AND CAUTIONS!

Attaching the Stand

1. LCD Display Screen

Connecting to an AC Power Source

Connecting an External Antenna

Composite Video (CVBS) Connection - AV IN 2

Connect the Mini AV cable (supplied) to the

Use a HDMI cable to connect the

Coaxial (S/PDIF) Connection

Use a coaxial cable to connect the unit with an amplifier or other

Picture and Sound Mode

TV/Radio (for DTV mode only)

• Press the / buttons to switch between columns.

When Watching a Program in DTV Mode:

To Watch a Recorded Program:

Scheduled Recording (in DTV mode only)

When Watching a Program in DTV Mode:

• Use the / buttons, then press OK to select a function such as Fast

Quick Links User Settings

Smart TV Applications Input Source Options

When Playing Music Files:

When Playing Movie Files:

Item Support Mode Explanation

Item Support Mode Explanation

Item Support Mode Explanation

Item Support Mode

Press OK to save the settings. If the connection is successful, the ‘Wired

Item Support Mode Explanation

• Record: Schedule a program to be recorded.

• PVR File System

Press OK and confirm to format your USB drive.

Press OK to check the speed of the USB drive.

NOTE: If you do not wish to view FREEVIEWPLUS interactive applications,

Software Update (USB)

Item Support Mode Explanation

Item Support Mode Explanation

Problems Relating to the USB Device

USB Multimedia Music MP3, WAV, AAC

Repair and Refurbished

Product does not work?

You might also like

• Record: Schedule a program to be recorded.

• PVR File System