Scribd Logo
Upload

Welcome to Scribd!

  • 126 views

    Instrument Control Valves

    Uploaded by

    Saroop Joseph
    This document provides requirements for control valves, shutdown/blowdown valves, and pressure relief valves used in a petroleum plant design. Control valves must be installed in accessible locations and have sufficient clearance for maintenance. Shutdown/blowdown valves must be 90 degree rotation ball valves with pneumatic spring return actuators. Pressure relief valves must be sized according to applicable codes to safely relieve pressure during relieving cases.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Instrument Control Valves

    Uploaded by

    Saroop Joseph
    126 views3 pages
    This document provides requirements for control valves, shutdown/blowdown valves, and pressure relief valves used in a petroleum plant design. Control valves must be installed in accessible locations and have sufficient clearance for maintenance. Shutdown/blowdown valves must be 90 degree rotation ball valves with pneumatic spring return actuators. Pressure relief valves must be sized according to applicable codes to safely relieve pressure during relieving cases.

    Original Description:

    control valve

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides requirements for control valves, shutdown/blowdown valves, and pressure relief valves used in a petroleum plant design. Control valves must be installed in accessible locations and have sufficient clearance for maintenance. Shutdown/blowdown valves must be 90 degree rotation ball valves with pneumatic spring return actuators. Pressure relief valves must be sized according to applicable codes to safely relieve pressure during relieving cases.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    126 views3 pages

    Instrument Control Valves

    Uploaded by

    Saroop Joseph
    This document provides requirements for control valves, shutdown/blowdown valves, and pressure relief valves used in a petroleum plant design. Control valves must be installed in accessible locations and have sufficient clearance for maintenance. Shutdown/blowdown valves must be 90 degree rotation ball valves with pneumatic spring return actuators. Pressure relief valves must be sized according to applicable codes to safely relieve pressure during relieving cases.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Petroleum Plant Design

    INSTRUMENT CONTROL VALVES


    November 26, 2014

    1.1 Control Valves


    Control valves shall be installed with the actuator in the vertical
    position on a horizontal line. Control valves shall be installed so that
    they are readily accessible from grade or platforms. Wherever
    possible, they should be located at grade for ease of maintenance.
    Clearance shall be provided above and below a control valve so that
    the bottom Bange and plug or the actuator and plug may be removed
    with the valve body in the pipeline. SuDcient clearance shall also be
    provided for valve removal.

    1.2 Shutdown/ Blowdown Valves


    All actuated ball valves shall be of the 90º rotation type and be
    complete with all necessary controls mounted on the valve. Actuator
    types shall be Pneumatic Spring Return. The valve stem orientation
    shall be as stated on the data sheet. Correct operation of the valve
    shall not be affected by the position of the valve or actuator.

    1.3 Pressure Relief Valves


    All pressure relieving devices shall be sized in strict accordance with
    applicable local, state, and national code requirements. Safety relief
    valves shall be sized by calculating ASME areas required for the most
    severe relieving case and shall follow the ASME requirements.
    Nomenclature and formulas used shall be according to API RP 520.
    Valve selection and installation shall be based on API RP 520, Part I
    and Part II. Closed relief valve discharge systems shall be designed
    in accordance with API RP 521.

    Instrument Oil and Gas Process

    Enter your comment...

    Popular posts from this blog

    OPEN AND CLOSED DRAINS SYSTEM


    December 05, 2014

    The drain system design is based on segregated


    systems, described below. The Open Non-
    Hazardous Drainage System provide drainage for …
    READ MORE

    CLOSED DRAIN DRUMS CALCULATION NOTE


    December 09, 2014

    1.0 INTRODUCTION
    The purpose of this calculation note is to provide
    the preliminary sizing of Closed Drain Drums at the…

    READ MORE

    DESIGN LOAD AND COMBINATION LOAD


    November 14, 2014

    1.1General …

    READ MORE

    Powered by Blogger

    Theme images by Michael Elkan

    Blog Archive

    Labels

    Report Abuse

    You might also like