FANUC

FANUCMANUAL
MANUALGUIDE
GUIDE ii (1/3)
(1/3)
FANUC Series00ii-MODEL
FANUCSeries -MODELD,
D,30i
30i//31i
31i//32i
32i--MODEL
MODELAA

Features
Features Supports entire operations for daily machining
in job shop
Shortening programming
Creating and Editing ⇒ time by abundant
Program machining cycles
Checking program easily
Checking Program ⇒ by realistic machining
simulation
Easy work-piece centering
Set-up before Machining ⇒ by Set-up guidance

Intuitive watching
Machining ⇒ machining with machine
status and cycle name
display
In-Machine Measurement work piece
⇒ and feeding back the
Measurement results to tool offset value
 FANUC
FANUCMANUAL
MANUALGUIDE
GUIDE ii (2/3)
(2/3)
FANUC Series00ii-MODEL
FANUCSeries -MODELD,
D,30i
30i//31i
31i//32i
32i--MODEL
MODELAA
New

Support
Supportof ofcompound
compoundmachine
machine
(30i
(30i/31i
/31i/32i-A,31i-A5)
/32i-A,31i-A5)

Lathe/machining center G code

system switching by M code
Milling Turning
Compound machining
with easy operation
New

Multi
Multipart
partprogram
programediting
editingfunction
function
Simultaneous display and editing
for 2 or 3 programs
Reducing programming time
Multi part program editing screen
 FANUC
FANUCMANUAL
MANUALGUIDE
GUIDE ii (3/3)
(3/3)
FANUC Series00ii-MODEL
FANUCSeries -MODELD,
D,30i
30i//31i
31i//32i
32i--MODEL
MODELAA

New
Engraving
Engravingcycle
cycle
Engraves serial number etc. with
inputting the alphanumeric characters
on screen

Reducing programming time

Engraving
New

Helical
Helicalplunging
plungingfor
forpocketing
pocketingcycle
cycle

Removes drilling process before pocketing

Reducing machining time

Helical plunging
 FANUC Manual Guide 0i
Easy-to-use Conversational Programming function
q The operation of MANUAL GUIDE 0iis more upgraded by the improvements, which are
“Connecting with CNC screen”, ”Graphic guidance” and “Specifying continuous plural figures”.
CNC program screen Main menu selection screen

Connecting strongly with CNC program screen

z It is very easy to go back and forth between MANUAL

GUIDE 0i and CNC program screen by a soft key.

Softkey

Example of Adding Graphic guidance of Menu selection screen

Graphic guidance
of Menu selection z The menu can be selected intuitively by the Graphic
screen guidance. In result, the operation becomes easier .

Example of Specifying continuously plural figures of drilling Adding the function of specifying continuously plural figures
Machin- for Cycle machining
ing type Drilling cycle Drilling cycle
block
z After a machining type block, the plural figure blocks can
Figure Hole pattern on the line
block Hole pattern on the line follow continuously. It makes the operation simpler.
Improvement
Drilling cycle Hole pattern on the arc

Hole pattern on the arc

 FANUC TURN MATE i (1/2)

i i
FANUC Series 0 / 0 Mate - TD

Features TURN MATE i has accomplished NC program-less

Features turning operation for conventional lathe

Operation
Operation Effect
Effect

Select Cycle Intuitive operation by picture

menu

Input Data Simple data input by guidance

drawing and message

Machining Machining start only by pushing

a button
 FANUC TURN MATE i (2/2)

i i
FANUC Series 0 / 0 Mate - TD

Supported
Supportedall
allturning
turningcycles
cycles

Drilling Roughing Finishing

( Include free figure) ( Include free figure)

Threading Grooving
( Include thread repairing)