The document contains a technical drawing with various measurements and specifications for a machined part. Key details include dimensions such as 40x37.2x16.25mm and 14.5x7.5mm, angles such as 45 degrees and 0.5x45, tolerances of 0.025mm, and notes specifying the material (41Cr4) and surface hardness (HB 275-290). Production details such as center holes, radii, and finishing processes are also listed, along with the author and date.
The document contains a technical drawing with various measurements and specifications for a machined part. Key details include dimensions such as 40x37.2x16.25mm and 14.5x7.5mm, angles such as 45 degrees and 0.5x45, tolerances of 0.025mm, and notes specifying the material (41Cr4) and surface hardness (HB 275-290). Production details such as center holes, radii, and finishing processes are also listed, along with the author and date.
The document contains a technical drawing with various measurements and specifications for a machined part. Key details include dimensions such as 40x37.2x16.25mm and 14.5x7.5mm, angles such as 45 degrees and 0.5x45, tolerances of 0.025mm, and notes specifying the material (41Cr4) and surface hardness (HB 275-290). Production details such as center holes, radii, and finishing processes are also listed, along with the author and date.
The document contains a technical drawing with various measurements and specifications for a machined part. Key details include dimensions such as 40x37.2x16.25mm and 14.5x7.5mm, angles such as 45 degrees and 0.5x45, tolerances of 0.025mm, and notes specifying the material (41Cr4) and surface hardness (HB 275-290). Production details such as center holes, radii, and finishing processes are also listed, along with the author and date.
0.8 0 0.025 C 1 0.8 0.8 0.8 0.8 6 X 32 1 x45 14,50 E C 7,50
34 d11 22 h10 18 k6
25 k6
70,80 25 k6 R0 SECTION G-G ,40
45° SCALE 1 : 1 m A ax 0.05 B
1.6 12.5
0.025 AB 0.025 AB G 33,25
0.025 AB
12.5 163
1,50
Conditii tehnice: Semifabricat forjat conform STAS 2171/2. Duritatea semifabricatului HB 275...290. Razele de racordare necotate vor fi R0.5 DETAIL E Muchiile ascutite se vor tesi la 0.5x45 1
SCALE 2 : 1 Tolerante mS conform ISO 2768
Gauri de centrare A 3.15 STAS 1361 la ambele capete
Desenat Marian A. Data Material: 41Cr4
Verificat de catre UTCN sunt rezervate Tate drepturile
