Scribd
Upload
85 views

Linear and Nonlinear Analysis - Technical Knowledge Base - Computers and Structures, Inc

This document discusses nonlinear structural analysis methods. It describes two types of nonlinear behavior: geometric nonlinearity due to P-Delta effects, and material nonlinearity where structural components behave inelastically. It provides an overview of various linear and nonlinear analysis methods including strength-based, pushover, response-spectrum, and time-history analysis. Engineers can use these methods to characterize structural behavior and inform design decisions. Nonlinear modeling and analysis is important for capacity design.

Uploaded by

Santiago Felix Mota Paez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
85 views

Linear and Nonlinear Analysis - Technical Knowledge Base - Computers and Structures, Inc

This document discusses nonlinear structural analysis methods. It describes two types of nonlinear behavior: geometric nonlinearity due to P-Delta effects, and material nonlinearity where structural components behave inelastically. It provides an overview of various linear and nonlinear analysis methods including strength-based, pushover, response-spectrum, and time-history analysis. Engineers can use these methods to characterize structural behavior and inform design decisions. Nonlinear modeling and analysis is important for capacity design.

Uploaded by

Santiago Felix Mota Paez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

13/2/2018 Nonlinear - Technical Knowledge Base - Computers and Structures, Inc.

- Technical Knowledge Base

General Topics SAP2000 CSiBridge ETABS SAFE PERFORM-3D CSiCOL Tutorials


Test Problems Documentation Licensing

Technical Knowledge Base / Home


Nonlinear
Added by Mike Abell, last edited by Jessica Napier on Jun 13, 2014

Nonlinear structural behavior may be associated with either geometric or material response, each described as follows:

Geometric nonlinearity concerns the P-Delta effects associated with application of external loading upon the displaced
configuration of a structure.

Material nonlinearity concerns inelastic structural response in which the behavior of a component, system, or connection
deviates from the initial stiffness tangent characteristic of linear-elastic behavior.

Linear vs. nonlinear analysis


Nonlinear analysis methods are best applied when either geometric or material nonlinearity is considered during structural
modeling and analysis. If only elastic material behavior is considered, linear analysis methods should suffice, though P-Delta
formulation may still be applied. Linear and nonlinear methods may be static or dynamic. A few of the traditional analysis
methods, and the relations between their attributes, are presented in Figure 1:

Figure 1 - Analysis methods

Each of these analysis methods has benefits and limitations. An overview of each method is as follows:

Strength-based analysis is a static-linear procedure in which structural components are specified such that their elastic
capacities exceed the demands of loading conditions. Strength-based demand-capacity (D-C) ratios indicate the adequacy
of each component. Since only the elastic stiffness properties are applied to the analytical model, strength-based analysis
is the most simplified and least time-consuming analysis method.

Static-pushover analysis is a static-nonlinear procedure in which a structural system is subjected to a monotonic load
which increases iteratively, through an ultimate condition, to indicate a range of elastic and inelastic performance. As a
function of both strength and deformation, the resultant nonlinear force-deformation (F-D) relationship provides insight into
ductility and limit-state behavior. Deformation parameters may be translational or rotational. Pushover is most suitable for
systems in which the fundamental mode dominates behavior. When higher-order modes contribute, as with taller buildings,
dynamic analysis is most effective.

Response-spectrum analysis is a dynamic-linear method in which maximum structural response is plotted as a function
of structural period for a given time-history record and level of damping. For a set of structural mode shapes and
corresponding natural frequencies, the linear superposition of SDOF systems represents response. Response measures
may be in terms of peak Acceleration, velocity, or displacement relative to the ground or the structure. Structures must
remain essentially elastic since response-spectrum analysis is dependent upon the superposition of gravity and lateral
effects. Results may be enveloped to form a smooth design spectrum.

Time-history analysis is a dynamic-nonlinear technique which may involve either the FNA or the direct-integration
method. FNA is a modal application, whereas with direct integration, the equations of motion are integrated at a series of
time steps to characterize dynamic response and inelastic behavior. Loading is time-dependent, and therefore suitable for

https://wiki.csiamerica.com/display/kb/Nonlinear 1/2
13/2/2018 Nonlinear - Technical Knowledge Base - Computers and Structures, Inc. - Technical Knowledge Base

the application of a ground-motion record. Time-history analysis may account for both material nonlinearity and P-Delta
effects.

Analysis objective
Engineers may use any of these analysis methods to:

Characterize and gain insight into structural behavior.

Generate information useful to the design decision-making process.

Capacity Design
Nonlinear modeling and analysis is fundamental to Capacity Design.

Articles
P-Delta effect

Material nonlinearity

Capacity Design

Using quasi-static time history analysis when nonlinear static analysis has convergence problems

Tutorials
Title Description Program

Pushover analysis first steps Guidelines for performing pushover analysis. SAP2000

Test Problems
Title Description Program

P-Delta effect for a cantilevered Calculation and verification of the P-Delta effects of a cantilevered SAP2000
column column.

https://wiki.csiamerica.com/display/kb/Nonlinear 2/2

You might also like