MCQs preparation for Engineering Competitive Exams

civil engineering, mechanical engineering, ece, eee, it, cse, lab viva questions, seminar topics, mcqs, class notes, gate syllabus and Online preparati

Home Engineering Multiple Choice Questions and Answers Engineering Interview Questions Online Tests

Home » Measurement and Instrumentation Quiz Questions and Answers » 109 TOP Measurement and Instrumentation - Electrical Engineering Multiple choice Questions and

Answers

Wednesday, 3 September 2014

109 TOP Measurement and Instrumentation - Electrical Engineering

Multiple choice Questions and Answers
Latest Measurement and Instrumentation Questions and Answers List

1. The use of _____ instruments is merely confined within laboratories as standardizing instruments.
(a)     absolute
(b)     indicating
(c)     recording
(d)     integrating
(e)     none of the above
Ans: a

2. Which of the following instruments indicate the instantaneous value of the electrical quantity being measured at the time at which it is being
measured ?
(a) Absolute instruments
(b) Indicating instruments
(c) Recording instruments
(d) Integrating instruments
Ans: b

3. _____ instruments are those which measure the total quantity of electricity delivered in a particular time.
(a)     Absolute
(b)     Indicating
(c)     Recording
(d)     Integrating
Ans: d

4. Which of the following are integrating instruments ?

(a)     Ammeters
(b)     Voltmeters
(c) Wattmeters
(d) Ampere-hour and watt-hour meters
Ans: d

5. Resistances can be measured with the help of

(a)     wattmeters      
(b)     voltmeters
(c) ammeters
(d) ohmmeters and resistance bridges
(e) all of the above Labels
Ans: d
10 Multiple Choice Question on
Combustion
6   According to application, instruments are classified as
(a)     switch board     10 TOP Fuels and Combustion O
Questions And Answers
(b)     portable
10 TOP MOST Chemical Reactio
(c)     both (a) and (b)
- CHEMICAL ENGINEERING Inter
(d)     moving coil Questions and
(e)     moving iron    
(f)     both (d) and (e) 10 TOP Objective Environmental
Ans: c Questions and Answers pdf
10 TOP Objective Fertilizer Tech
7. Which of the following essential features is possessed by an indicating instrument ? Questions and Answers pdf
(a)     Deflecting device 10 TOP Objective Polymer Techn
Questions and Answers pdf
(b)     Controlling device
(c) Damping device 10 TOP PROCESS CONTROL and
INSTRUMENTATION Online Test
(d) All of the above With Answers
Ans: d
10 TOP Refractory Technology M
choice Questions and Answers p
8. A _____ device prevents the oscillation of the moving system and enables the latter to reach its final position quickly A.C. Fundamentals
(a)     deflecting
A.C. Fundamentals and circuit th
(b)     controlling Quiz Questions
(c)     damping AC Fundamentals and Circuit Th
(d)     any of the above Quiz Questions
Ans: c Airport Engineering Objective Qu
Answers
9. The spring material used in a spring control device should have the following property. Airport Engineering Online Quiz Q
(a)     Should be non-magnetic Applied Mechanics and Graphic
(b)     Most be of low temperature co-efficient Objective Questions and Answer
(c)     Should have low specific resistance Applied Mechanics and Graphic
(d)     Should not be subjected to fatigue Quiz Questions
(e)     All of the above Basic Chemical Engineering Plan
Ans: e Multiple choice Questions and A
Basic chemical engineering ques
answers
10. Which of the following properties a damping oil must possess ?
(a) Must be a good insulator Basic Chemical Engineering The
Multiple choice Questions and A
(b) Should be non-evaporating
Basic Chemical Mechanics Inter
(c) Should not have corrosive action upon the metal of the vane
Questions And Answers
(d) The viscosity of the oil should not change with the temperature
Basic Environmental Engineering
(e) All of the above Type Questions And Answers
Ans: e
Basic Fertilizer Technology Mult
Questions And Answers
11. A moving-coil permanent-magnet instrument can be used as _____ by using a low resistance shunt. Basic Induction Motor Interview
(a)     ammeter And Answers
(b)     voltmeter Basic Mass Transfer Objective ty
(c) flux-meter and Answers pdf
(d) ballistic galvanometer Basic Mechanical Operation Obj
Ans: a Questions And Answers
Basic Petroleum Refinery Engine
12. A moving-coil permanent-magnet instrument can be used as flux-meter Multiple choice Questions and A
(a)     by using a low resistance shunt Bio Engineering Objective Type Q
Ansers
(b)     by using a high series resistance
(c) by eliminating the control springs Building Materials and Construc
Questions with Answers PDF
(d) by making control springs of large moment of inertia
Building Materials and Construc
Ans: c
Questions and Answers
Cables Online Quiz Questions
13. Which of the following devices may be used for extending the range of instruments ?
Cables Online Quiz Questions an
(a)     Shunts
(b)     Multipliers Chemical Engineering Basics Ob
Questions And Answers
(c) Current transformers
Chemical Engineering Multiple c
(d) Potential transformers
Questions and Answers
(e) All of the above
chemical engineering objective q
Ans: e Answers
Chemical Engineering Online Mo
14. An induction meter can handle current up to Papers
(a)     10 A                 Chemical Engineering Plant Eco
(b)     30 A Interview Questions And
(c) 60 A Chemical Engineering Plant Eco
(d)     100 A Viva Questions And Answers
Ans: d Chemical Engineering Question
Online MCQ Quiz
15. For handling greater currents induction wattmeters are used in conjunction with Chemical Engineering Quiz ques
(a)     potential transformers answers Download free pdf
(b)     current transformers chemical engineering technical i
questions and answers
(c)     power transformers
(d) either of the above Chemical Engineers Common In
Questions & Answers
(e) none of the above
Chemical Process - Chemical En
Ans: b
MCQs - Online Free Tests
Chemical Process - Chemical En
16.    Induction type single phase energy meters measure electric energy in Questions and Answers
(a)    kW
Chemical Process interview Que
(b)    Wh Answers
(c)    kWh Chemical Reaction Engineering -
(d)    VAR Engineering MCQs Interview Tec
(e)    None of the above Questions and Answers
Ans: c Chemical Reaction Engineering -
Engineering Multiple Choice Que
Answers
17. Most common form of A.C. meters met with in every day domestic and industrial installations are
chemical reaction engineering e
(a)     mercury motor meters
questions
(b)     commutator motor meters
(c) induction type single phase energy meters chemical reaction engineering la
(d) all of the above questions
Ans: c CHEMICAL REACTION ENGINEE
MCQ.pdf
18. Which of the following meters are not used on D.C. circuits chemical reaction engineering q
answers pdf
(a) Mercury motor meters
(b) Commutator motor meters CIRCUIT THEORY AND ELECTRIC
Questions and Answers
(c) Induction meters
Circuits and Circuit Theory Quiz
(d) None of the above
and Answers
Ans: c
Civil Engineering Interview Ques
Answers pdf download free
19. Which of the following is an essential part of a motor meter ?
CIVIL ENGINEERING Questions
(a) An operating torque system
Commmon Cable Technician Int
(b) A braking device Questions with Answers PDF
(c) Revolution registering device
Common Process Control And
(d) All of the above Instrumentation Objective type Q
Ans: d Answers pdf
Common Cable Installer Intervie
20. A potentiometer may be used for And Answers PDF
(a) measurement of resistance Common Cables Interview Ques
(b) measurement of current Answers pdf
(c) calibration of ammeter Common Commitment and Econ
Dispatch Interview Questions An
(d) calibration of voltmeter
(e) all of the above Common Dock & Harbour Engine
Interview Questions with Answe
Ans: e
Common Generator Operator Int
Questions And Answers PDF
21 is an instrument which measures the insulation resistance of an electric circuit relative to earth and one another,
Common Instrumentation Interv
(a)     Tangent galvanometer Questions And Answers pdf
(b)     Meggar
Common Measurement and Inst
(c) Current transformer Interview Questions And Answer
(d) None of the above Common Mechanical Operation
Ans: b Questions And Answers
Common Mechatronic Engineeri
22. The household energy meter is Type Questions And Answers pd
(a)     an indicating instrument Common Petroleum Refinery En
(b)     a recording instrument interview Questions And Answer
(c) an integrating instrument Common Relay Interview Questi
(d)     none of the above Answers
Ans: c Common Thermal Power Plant I
Questions with Answers PDF

23. The pointer of an indicating instrument should be Commonly Asked Aeronautical E

Interview Questions and Answer
(a)     very light
Commonly Asked Chemical Proc
(b)     very heavy
Objective type Questions and An
(c) either (a) or (b)
Commonly Asked Electrical Circ
(d) neither (a) nor (b) questions And Answers PDF
Ans: a
Commonly Asked Instrumentatio
engineering interview questions
24. The chemical effect of current is used in pdf
(a)     D.C. ammeter hour meter Commonly Asked Stoichiometry
(b)     D.C. ammeter type Questions and Answers pdf
(c) D.C. energy meter competitive and entrance exami
(d) none of the above Comprehensive MCQs For Fuels
Ans: a Combustion
Compressors
25. In majority of instruments damping is provided by Concrete Technology and Design
(a)    fluid friction     Structures Objective Questions
(b)    spring Construction Planning and Mana
(c)    eddy currents   Objective questions and Answer
(d)    all of the above Construction Planning and Mana
Online Quiz Questions
Ans: c
Control Systems Quiz Questions
26. An ammeter is a CSE Course Questions and Answ
(a)     secondary instrument Current Electricity Objective Quiz
(b)     absolute instrument and Answers
(c) recording instrument Current Electricity Online Quiz Q
(d) integrating instrument D.C. Generators Quiz Questions
Ans: a D.C. Motors Quiz Questions and
DC Generators Online Quiz Ques
27. In a portable instrument, the controlling torque is provided by DC Motors Online Quiz Question
(a)     spring
Design of Masonry Structures O
(b)     gravity Questions and Answers
(c)     eddy currents   Design of Steel Structures Objec
(d)     all of the above Questions
Ans: a Design of Steel Structures Online
Questions
28. The disc of an instrument using eddy current damping should be of Docks and Harbor Engineering O
(a) conducting and magnetic material Questions and Answers
(b) non-conducting and magnetic material ECE Objective type Questions an
(c) conducting and non-magnetic material ECE Questions and Gate and All
(d) none of the above Questions and Answers
Ans: c
 Economics of Power Generation
29. The switch board instruments Questions
(a)     should be mounted in vertical position Economics of Power Generation
(6)     should be mounted in horizontal position Questions and Answers
(c) either (a) or (b) Electric Traction Quiz Questions
(d) neither (a) nor (b) Electrical Cables Quiz Questions
Ans: a Electrical Engineering Materials
Questions
30. The function of shunt in an ammeter is to Electrical Engineering Materials
(a) by pass the current Questions and Answers
(b) increase the sensitivity of the ammeter Electrical Engineering MCQs
(c) increase the resistance of ammeter Electrical Machine Design Quiz Q
(d) none of the above Answers
Ans: a Electrical Mechine online Quiz Q
Electrical Mechine Online Quiz Q
31. The multiplier and the meter coil in a voltmeter are in ELECTRICAL OBJECTIVE QUEST
(a)     series ANSWERS
(b)     parallel Electrolysis and Storage of Batte
(c) series-parallel Quiz questions
(d) none of the above Electrolysis and Storage of Batte
Questions and Answers
Ans: a
Electromagnetic Induction Onlin
Questions
32. A moving iron instrument can be used for
Electromagnetic Induction Quiz
(a)     D.C. only
and Answers
(b)     A.C. only
Electromagnetic Objective type q
(c)     both D.C. and A.C. answers
Ans: c
Electrostatics Online Quiz Quest
Electrostatics Quiz Questions an
33. The scale of a rectifier instrument is
Engineering Material Model Onli
(a)     linear
papers
(b)     non-linear
Engineering Material Online Quiz
(c) either (a) or (b) and Answers
(d) neither (a) nor (b)
Engineering Material Online Test
Ans: a
Engineering Materials Objective
Questions and Answers
34. For measuring current at high frequency we should use
Engineering Mechanics Objectiv
(a)     moving iron instrument Questions and Answers
(b)     electrostatic instrument Engineering Mechanics Online P
(c) thermocouple instrument
Engineering Mechanics Online Q
(d) none of the above
Engineering Mechanics Quiz Que
Ans: c Answers
Engineering Quiz Questions And
35. The resistance in the circuit of the moving coil of a dynamometer wattmeter should be Refractory Technology
(a)     almost zero       Engineering students test questi
(b)     low answers on Chemical Engineerin
(c) high Engines
(d) none of the above Environmental Engineer Interview
Ans: c
Environmental Engineering - mul
questions in basic
36. A dynamometer wattmeter can be used for Environmental Engineering Inter
(a) both D.C. and A.C. Questions
(b) D.C. only Environmental Engineering Obje
(c)     A.C. only Questions and Answers
(d)     any of the above Environmental Engineering Onlin
Ans: a Questions
Fertilizer Technology - Chemical
37. An induction wattmeter can be used for MCQs Interview Technical Quest
Answers
(a)     both D.C. and A.C.
Fluid Mechanics Interview Ques
(6)     D.C. only
(c) A.C. only Fluid Mechanics Objective type Q
Answers
(d) any of the above
Fluid Mechanics Online Quiz Que
Ans: b
Fluid Mechanics Problems Quiz
choice questions download free
38. The pressure coil of a wattmeter should be connected on the supply side of the current coil when
Frequently Aksed Chemical Engi
(a)     load impedance is high
Economics Multiple choice Ques
(b)     load impedance is low Answers
(c) supply voltage is low Frequently Asked Petroleum Refi
(d) none of the above Engineering Multiple choice Que
Ans: a Answers pdf
Frequently Asked AC & DC moto
39. In a low power factor wattmeter the pressure coil is connected and working Interview Questions
Answers
(a)     to the supply side of the current coil
Frequently Asked Aeronautical E
(b)     to the load side of the current coil
Interview Questions with Answe
(c) in any of the two meters at connection
Frequently Asked Cable Technic
(d) none of the above Choice Questions And Answers
Ans: b
Frequently Asked Chemical Engi
Basics interview Questions And
40. In a low power factor wattmeter the compensating coil is connected Frequently Asked Chemical Engi
(a)     in series with current coil Economics Multiple choice Ques
(b)     in parallel with current coil Answers pdf
(c) in series with pressure coil
(d) in parallel with pressure coil Frequently Asked Circuit design
Ans: c Questions And Answers Pdf
Frequently Asked Concrete Tech
41. In a 3-phase power measurement by two wattmeter method, both the watt meters had identical readings. The Interview Questions And Answer
power factor of the load was Frequently Asked D.C Generators
Questions And Answers
(a)     unity
(6)     0.8 lagging Frequently Asked D.C Motor Inte
Questions And Answers
(c)     0.8 leading
Frequently Asked Electric Tractio
(d)     zero
Questions With Answers PDF
Ans: a
Frequently Asked Electrical Drive
Questions And Answers
42. In a 3-phase power measurement by two wattmeter method the reading of one of the wattmeter was zero. The
Frequently Asked Electromagnet
power factor of the load must be Interview Questions And Answer
(a)    unity Frequently Asked Environmental
(b)    0.5 Interview Questions with Answe
(c)    0.3 Frequently Asked Fuels and Com
(d)    zero Multiple choice Questions and A
Ans: b Frequently Asked Highway Engin
Interview Questions with Answe
43. The adjustment of position of shading bands, in an energy meter is done to provide Frequently Asked Irrigation Engin
(a)     friction compensation Interview Questions with Answe
(b)     creep compensation Frequently Asked Materials And
Objective type Questions and An
(c) braking torque  
(d) none of the above Frequently Asked Mechanical Op
Objective type Questions and An
Ans: a
Frequently Asked Petroleum Refi
Objective type Questions and An
44. An ohmmeter is a
frequently asked questions abou
(a) moving iron instrument Power Engineering
(b) moving coil instrument
Frequently Asked Refractory Tec
(c) dynamometer instrument Objective Type Questions And A
(d) none of the above Frequently asked Strength of ma
Ans: b Interview Questions With Answe
Frequently Asked surveying Inte
45. When a capacitor was connected to the terminal of ohmmeter, the pointer indicated a low resistance initially and then slowly came to infinity Questions with Answers PDF
position. This shows that capacitor is Frequently Asked Transmission
(a)     short-circuited Distribution Interview Questions
PDF
(b)     all right
(c)     faulty Fuels and Combustion - Chemic
Questions and Answers
Ans: b
Fuels and Combustion Interview
And Answers
46. For measuring a very high resistance we should use
Fuels and Combustion Objective
(a)     Kelvin's double bridge Questions and Answers pdf
(b)     Wheat stone bridge
Gas Turbines and Jet Engines M
(c) Meggar
Gas Turbines and Jet Engines O
(d) None of the above Questions and Answers
Ans: c
Gas Turbines and Jet Engines Q
Practice tests
47. The electrical power to a meggar is provided by Gas Turbines and Jet Engines Q
(a)     battery
Gate Preparation questions for E
(b)     permanent magnet D.C. generator
heat transfer mcq pdf heat and m
(c) AC. generator objective questions pdf
(d) any of the above
Heat Transfer Objective type Que
Ans: b Answers
Heat Transfer Interview Question
48. In a meggar controlling torque is provided by Answers
(a)     spring Heat Transfer Lab Viva Question
(b)     gravity Answers
(c)     coil Heat Transfer Objective Questio
(d)     eddy current Answers
Ans: c Heat Transfer Online Test
Heating and Welding Online Quiz
49. The operating voltage of a meggar is about Heating and Welding Quiz Quest
(a) 6 V Answers
(b) 12 V Highway engineering Objective q
(c) 40 V answers
(d) 100 V Highway Engineering Online Qui
Ans: d Hiried Process Equipment And P
Multiple choice Questions and A
50. Murray loop test can be used for location of Hiried Construction Managemen
(a) ground fault on a cable Questions with Answers PDF
(b) short circuit fault on a cable Hiried Fertilizer Technology Mult
Questions and Answers pdf
(c) both the ground fault and the short-circuit fault
(d) none of the above Hiried Fluid Mechanics Interview
with Answers PDF
Ans: c
Hiried Heat Transfer Multiple ch
Questions and Answers pdf
51. Which of the following devices should be used for accurate measurement of low D.C. voltage ?
Hiried Heating And Welding Inte
(a) Small range moving coil voltmeter Questions and Answers
(b) D.C. potentiometer
Hiried Materials And Constructio
(c) Small range thermocouple voltmeter choice Questions and Answers p
(d) None of the above Hiried Polymer Technology Mult
Ans: b Questions and Answers pdf
 Hiried Railway Engineering Interv
52. It is required to measure the true open circuit e.m.f. of a battery. The best device is Questions And Answers
(a) D.C. voltmeter Hiried Refractory Technology Mu
(b) Ammeter and a known resistance Questions and Answers pdf
(c) D.C. potentiometer Hiried Sub Structure Constructio
Questions And Answers pdf
(d)     None of the above
Ans: c Hiried Switchgear Protection Int
Questions with Answers PDF
Hydraulic Machines Objective ty
53. A voltage of about 200 V can be measured
and Answers
(a)     directly by a D.C. potentiometer
Hydraulics and Fluid Mechanics
(b)     a D.C. potentiometer in conjunction with a volt ratio box Questions and Answers
(c) a D.C. potentiometer in conjunction with a known resistance
Hydraulics and Fluid Mechanics
(d) none of the above questions
Ans: b Hydrolic Mechines Engineering Q
Questions
54. A direct current can be measured by Hydrolic Mechines Test 1
(a)     a D.C. potentiometer directly Questions
(b)     a D.C. potentiometer in conjunction with a standard resistance I.C. Engines Objective type Ques
(c) a D.C. potentiometer in conjunction with a volt ratio box Answers
(d)     none of the above IE Engines Quiz Questions
Ans: b Important Questions And Answe
Fertilizer Technology
55. To measure a resistance with the help of a potentiometer it is Industrial Drives - Electrical Engi
(a)     necessary to standardise the potentiometer Industrial Drives Quiz Questions
(b)     not necessary to standardise the potentiometer Industrial Engineering Objective
(c) necessary to use a volt ratio box in conjunction with the potentiometer Questions and Answers
(d) none of the above Irrigation
Ans: b LAB VIVA 2 Marks Interview Que
Latest Automobile Engineering M
56. A phase shifting transformer is used in conjunction with Choice Questions And Answers
(a) D.C. potentiometer Download
(b) Drysdale potentiometer Latest Chemical Engineering Ba
(c) A.C. co-ordinate potentiometer Choice Questions And Answers
(d) Crompton potentiometer Latest Chemical Engineering Pla
mcqs
 Ans: b
Latest Chemical Process Multip
Questions and Answers pdf
57. Basically a potentiometer is a device for
Latest Energy Oil Gas Engineerin
(a)     comparing two voltages
Questions and Answers
(b)     measuring a current
Latest Fertilizer Technology Lab
(c) comparing two currents Questions And Answers
(d) measuring a voltage
Latest Fuels and Combustion On
(e) none of the above Questions And Answers
Ans: a Latest Mass Transfer Multiple ch
Questions and Answers pdf
58. In order to achieve high accuracy, the slide wire of a potentiometer should be Latest Materials And Constructio
(a)     as long as possible choice Questions and Answers p
(b)     as short as possible Latest Polymer Technology Mult
(c) neither too small not too large Questions and Answers pdf
(d) very thick Machine Design Objective Type
Ans: a and Answers
Machine Design Online Quiz Que
59. To measure an A. C. voltage by using an A.C. potentiometer, it is desirable that the supply for the potentiometer in taken Machine Design Quiz Questions
(a)     from a source which is not the same as the unknown voltage Magnatic Circuit Online Quiz Que
(b)     from a battery Magnetic Circuit Online Quiz Que
(c) from the same source as the unknown voltage Magnetic Circuit Quiz Questions
(d) any of the above
Magnetism and Electromagnetis
Ans: c Quiz Questions
Magnetism and Electromagnetis
60. The stator of phase shifting transformer for use in conjunction with an A.C. potentiometer usually has a Questions and Answers
(a)     single-phase winding Mass Transfer Lab Viva Questio
(b)     two-phase winding Answers
(c) three-phase winding Mass Transfer - Chemical Engine
(d) any of the above Questions and Answers
Ans: b Mass Transfer interview Questio
Answers
61. In an AC. co-ordinate potentiometer, the currents in the phase and quadrature potentiometer are adjusted to be Mass transfer questions answer
Freelancers and Jobs
(a)     out of phase by 90°
(6)     out of phase by 60° Materials And Construction Inter
Questions And Answers
(c) out of phase by 30°
(d) out of phase by 0° Materials And Construction Que
Answers
(e) out of phase by 180°
MCQ on Chemical Process
Ans: a
mcq questions with answers on
Control And Instrumentation
62. A universal RLC bridge uses
MCQs ON HEAT TRANSFER (Phy
(a) Maxwell bridge configuration for measurement of inductance and De Santas bridge for measurement of capacitance Answers
(b) Maxwell Wein bridge for measurement of inductance and modified De Santy's bridge for measurement of capacitance
Measurement and Instrumentati
(c) Maxwell Wein bridge for measurement of inductance and Wein bridge for measurement of capacitance Questions and Answers
(d) Any of the above. Mechanical Engineering Objectiv
Ans: b Questions and Answers
Mechanical Engineering Online M
63. For measurements on high voltage capacitors, the suitable bridge is Mechanical Engineering Online M
(a)     Wein bridge Mechanical Operation - chemica
(b)     Modified De Santy's bridge quiz questions and answers
(c)     Schering bridge Mechanical Operation Lab Viva Q
(d)     Any of the above And Answers
(e) None of the above Mechanical Operation Objective
Questions and Answers pdf
Ans: c
Mechanical Operations - Chemic
Engineering Questions and Answ
64. In an Anderson bridge, the unknown inductance is measured in terms of
(a)     known inductance and resistance Mining Engineering Objective Ty
And Answers
(b)     known capacitance and resistance
Most Recently Asked Chemical E
(c) known resistance Plant Economics Objective Type
(d) known inductance And Answers
Ans: b Most Recently Asked Network E
Objective Type Questions And A
65. Wagner earthing device is used to eliminate errors due to Downloading
(a)     electrostatic coupling Most recently Chemical Process
(b)     electromagnetic coupling choice Questions and Answers p

(c) both (a) and (b) Most recently Heat Transfer Mul
Questions and Answers pdf
(d) none of the above
Most recently Mechanical Opera
Ans: a
choice Questions and Answers p
Most recently Petroleum Refiner
66. For measurement of mutual inductance we can use Multiple choice Questions and A
(a)     Anderson bridge
Most recently process Equipmen
(b)     Maxwell's bridge Design Multiple choice Question
(c) Heaviside bridge Answers pdf
(d) Any of the above Most recently Refractory Techno
Ans: c choice Questions and Answers
Multiple Choice Questions (MCQ
67. For measurement of inductance having high value, we should use power
(a)     Maxwell's bridge Multiple Choice Questions on Ch
(b)     Maxwell Wein bridge Engineering

(c)     Hay's bridge     Multiple Choice Questions on Ch

Engineering Plant Economics
(d)     Any of the above
Multiple Choice Questions on En
Ans: c
Engineering
Multiple Choice Questions on Fu
68. If the current in a capacitor leads the voltage by 80°, the loss angle of the capacitor is Combustion
(a)     10°
Multiple Choice Questions on M
(b)     80° Construction
(c)     120° Multiple Choice Questions on M
(d)     170° Operations
Ans: a Multiple Choice Questions on Nu
Engineering
69. In a Schering bridge the potential of the detector above earth potential is Multiple Choice Questions on Pe
(a)     a few volts only Refinery Engineering
(6)     1 kV Multiple Choice Questions on Po
(c)     5 kV Technology
(d)     10 kV Multiple Choice Questions on Pr
and Instrumentation
Ans: a
Multiple Choice Questions on Pr
Equipment and Plant Design
70. To avoid the effect of stray magnetic field in A.C. bridges we can use
(a)     magnetic screening Multiple Choice Questions on Re
Technology
(b)     Wagner earthing device
Multiplte Choice Questions on C
(c) wave filters Reaction Engineering
(d) any of the above
Network Theorems Online Quiz Q
 Ans: a
Network Theorems Quiz Questio
Answers
71. If an inductance is connected in one arm of bridge and resistances in the remaining three arms
Nozzles and Turbines Objective
(a)     the bridge can always be balanced
Nuclear Power Engineering
(b)     the bridge cannot be balanced Questions and Answers
(c)     the bridge can be balanced if the resistances have some specific values
Nuclear Power Engineering - Che
Ans: b Engineering Questions and answ
Download
72. A power factor meter has Nuclear Power Engineering Mult
(a)     one current circuit and two pressure circuits Questions and Answers pdf
(b)     one current circuit and one pressure circuit nuclear power plant objective qu
(c) two current circuits and one pres¬sure circuit answers
(d) none of the above Nuclear Power Plants - Mechani
Engineering Questions and Answ
Ans: a
Nuclear Power Plants Objective
questions and answers
73. The two pressure coils of a single phase power factor meter have
(a)     the same dimensions and the same number of turns Nuclear Power Plants Online Qu

(b)     the same dimension but different number of turns Objective Chemical Process Que
Answers pdf
(c)     the same number of turns but different dimensions
Objective Mass Transfer Questio
(d)     none of the above
Answers pdf
Ans: a
Objective Mechanical Operation
and Answers pdf
74. In a single phase power factor meter the phase difference between the currents in the two pressure coils is
Objective Petroleum Refinery En
(a)     exactly 0° Questions and Answers pdf
(b)     approximately 0° Objective Polymer Technology Q
(c) exactly 90° Answers pdf
(d) approximately 90°
Ans: c Objective Process Control And
Instrumentation Questions and A
75. In a dynamometer 3-phase power factor meter, the planes of the two moving coils are at Objective Process Equipment An
(a)     0° Design Questions and Answers p
(b)     60° Objective Questions On Fuels an
Combustion
(c)     90°
(d)     120° Objective Questions on Material
Construction
Ans: d
objective questions on Process
And Plant Design
76. In a vibrating reed frequency meter the natural frequencies of two adjacent reeds have a difference of
Objective Refractory Technology
(a)     0.1 Hz and Answers pdf
(b)     0.25 Hz
Objective Type Question Answer
(c)     0.5 Hz Environmental Engineering
(d)     1.5 Hz Objective Type Questions And A
Ans: c Fertilizer Technology
Objective Type Questions on Che
77. In a Weston frequency meter, the magnetic axes of the two fixed coils are Engineering Plant Economics
(a)     parallel Online test for Diploma in Chem
(b)     perpendicular Engineering Basics
(c)     inclined at 60°   Online test for Environmental En
(d)     inclined at 120° Online tests for interview
Ans: b Petroleum Refinery Engineering
questions and answers pdf
78. A Weston frequency meter is Polymer Technology - Chemical
(a)     moving coil instrument MCQs Interview Technical Quest
(b)     moving iron instrument Polymer Technology - Chemical
(c) dynamometer instrument Questions and Answers
(d) none of the above Polymer Technology Interview Q
 Ans: b Answers
Polymer Technology Lab Viva Qu
Answers
79. A Weston synchronoscope is a
Polymer Technology Multiple ch
(a)     moving coil instrument
Questions and Answers pdf
(b)     moving iron instrument
Polyphase Induction Motors Onl
(c) dynamometer instrument Questions
(d) none of the above
Polyphase Induction Motors Qui
Ans: c and Answers
Power Plant Engineering Online
80. In a Weston synchronoscope, the fixed coils are connected across Questions
(a)     bus-bars Power Plant Engineering Quiz Qu
(b)     incoming alternator Answers
(c)     a lamp Process Control And Instrument
(d)     none of the above Test Questions With Answers
Ans: b Process Equipment And Plant De
Viva Questions And Answers
81. In Weston synchronoscope the moving coil is connected across Process Instrument and Control
Questions
(a)     bus-bars
(b)     incoming alternator Process Instrumentation and Co
Objective type Questions and An
(c) fixed coils
(d) any of the above Production management and Ind
Engineering Online Quiz Questio
Ans: a
Production Technology Objective
Questions and Answers
82. The power factor of a single phase load can be calculated if the instruments available are
Questions and Answers for Civil
(a) one voltmeter and one ammeter
Questions On Electrical Machine
(b) one voltmeter, one ammeter and one wattmeter Interview
(c) one voltmeter, one ammeter and one energy meter
Questions on Mass Transfer Mu
(d) any of the above Questions and Answers pdf
Ans: b Questions on Materials And Con
Multiple choice Questions and A
83. The desirable static characteristics of a measuring system are Questions on Process Control A
(a)     accuracy and reproducibility Instrumentation Multiple choice
(b)     accuracy, sensitivity and reproducibility and Answers pdf
(c) drift and dead zone Questions on Refractory Techno
(d) static error choice Questions and Answers p

Ans: b Quiz and MCQ on Fertilizer Tech

Competitive Exams
Quiz and Multiple Choice Questi
84. The ratio of maximum displacement deviation to full scale deviation of the instrument is called
Transfer
(a)     static sensitivity
Railway Engineering Online Quiz
(b)     dynamic deviation
(c) linearity Railways - Civil Engineering Ques
Answers
(d) precision or accuracy
Real Time Breaker And Relay Int
Ans: c Questions And Answers PDF
Real Time Electrostatics Intervie
85. Systematic errors are With Answers
(a)     instrumental errors Real time Heating And Welding I
(b)     environmental errors Questions and Answers
(c) observational errors Realtime Chemical Engineering P
(d) all of the above Economics Objective Type Ques
Ans: d Answers
Realtime Chemical Process
Questions and Answers pdf
86. Standard resistor is made from
(a)     platinum Realtime Fertilizer Technology O
Questions And Answers
(b)     maganin Realtime Heat Transfer Multiple
(c)     silver Questions and Answers pdf
(d)     nichrome Realtime Mass Transfer Multiple
Ans: b Questions and Answers pdf
Realtime Materials And Construc
87. Commonly used standard capacitor is choice Questions and Answers p
(a)     spherical type Realtime Polymer Technology M
Questions and Answers pdf
(b)     concentric cylindrical type
(c) electrostatic type Realtime Process Control And
Instrumentation Multiple choice
(d) multilayer parallel plate type and Answers pdf
Ans: b
Realtime Refractory Technology
type Questions and Answers pdf
88. Operating torques in analogue instruments are Recent questions and answers i
(a)     deflecting and control Environmental Enggineering
(b)     deflecting and damping Recently Asked Fertilizer Techno
(c) deflecting, control and damping Interview Questions And Answer
(d) vibration and balancing Recently Asked Aircraft Mainten
Ans: c Engineering Interview Questions
PDF

89. Commonly used instruments in power system measurement are Recently Asked Chemical Engine
Objective Type Questions And A
(a)     induction
Recently Asked Chemical Reacti
(b)     moving coil or iron
Engineering Multiple Choice Que
(c)     rectifier Answers
(d)     electrostatic Recently Asked Construction eq
Ans: a Interview Questions with Answe
Recently Asked Construction Pra
90. Damping of the Ballistic galvanometer is made small to Interview Questions with Answe
(a)     get first deflection large Recently Asked Control Systems
(b)     make the system oscillatory Questions And Answers
(c) make the system critically damped Recently Asked D.C machine Inte
(d) get minimum overshoot Questions And Answers
Ans: a Recently Asked Economic Dispa
Systems Interview Questions An
Pdf
91. If an instrument has cramped scale for larger values, then it follows
Recently Asked Electrical Machi
(a)     square law       Interview Questions And Answer
(b)     logarithmic law
Recently Asked Fuels andcombu
(c)     uniform law     questions and answers
(d)     none of the above Recently Asked Instrumentation
Ans: b Questions And Answers pdf
Recently Asked Materials and Co
92. Volt box is a component to Multiple Choice Questions
(a)     extend voltage range Recently Asked Mechanical Ope
(6)     measure voltage Multiple Choice Questions And A
(c) compare voltage in a box Recently Asked Petroleum Refin
(d) none of the above Engineering Objective type Ques
Answers pdf
Ans: a
Recently Asked Process Control
Instrumentation questions and a
93. E.m.f. of a Weston cell is accurately measured by
Recently Asked Process Equipm
(a)     electrostatic voltmeter Design Multiple Choice Question
(b)     hot wire voltmeter Answers
(c) isothermal voltmeter Recently Asked Steel Structures
(d) electrodynamic voltmeter Interview Questions with Answe
Ans: a Rectifiers and Converters Quiz Q
Answers
94. The gravity controlled instrument has crowded scale because current is proportional to Refractory Technology - Chemic
(a)     balancing weight Questions and Answers
(b)     deflection angle Refractory Technology interview
And Answers
(c)     sine of deflection angle
Ans: c Refregiration and air Conditionin
Practice Test
Refrigeration and Air Conditionin
95. A sensitive galvanometer produces large deflection for a
type Questions and Answers
(a)     small value of current
Sample multiple-choice question
(b)     large value of current Equipment And Plant Design
(c) large value of power
Single Phase Induction Motors Q
(d) large value of voltage Questions and Answers
(e) none of the above Soil Mechanics and Foundation
Ans: a Objective Questions and Answer
Soil Mechanics and Foundation
96. A multirangq instrument has Online Quiz Questions
(a) multiple shunt or series resistances inside the meter soil mechanics lab viva question
(b) multicoii arrangement answers
(c) variable turns of coil soil mechanics questions and an
(d) multi range meters inside the measurement system Steam Boilers
(e) any of the above Steam Boilers and Turbines Onli
Ans: a Questions
Steam Boilers and Turbines Onli
97. The rectifier instrument is not free from Questions
(a)     temperature error Strength of Materials Objective Q
(b)     wave shape error Answers
(c) frequency error Strength of Materials Online Qui
(d) all of the above Strength of Materials Questions
Ans: c Strengths of Meterials Online Qu
Structural Analysis Objective Qu
98. Alternating current is measured by Answers
(a)     induction ammeter structural analysis objective type
(b)     permanent magnet type ammeter pdf
(c) electrostatic ammeter Structural Analysis Online Quiz Q
(d) moving iron repulsion type voltmeter structural analysis questions an
Ans: a Surveying Online Quiz Questions
Surveying Problems Quiz questio
99. Most sensitive galvanometer is
switchgear and protection objec
(a) elastic galvanometer questions pdf
(b) vibration galvanometer Switchgear Protections Online Q
(c) Duddlb galvanometer
Switchgear Protections Quiz Que
(d) spot ballistic galvanometer Answers
Ans: d Synchronous Motors Online Quiz
Questions
100. Instrument transformers are Synchronous Motors Quiz Quest
(a)     potential transformers Answers
(b)     current transformers The Fundamentals of Nuclear Po
(c) both (a) and (b) Questions & Answers
(d) power transformers Theory of Machines Objective ty
Ans: c and Answers
Theory of Machines Online Quiz
101. An instrument transformer is used to extend the range of Theory of Machines Online Quiz
(a) induction instrument Thermodynamics Model Exams
(b) electrostatic instrument Thermodynamics Objective Type
(c) moving coil instrument and Answers
(d) any of the above Thermodynamics Online Electro
Ans: a Mechanical Engineering Test 3
Thermodynamics Online Electro
102. Wattmeter cannot be designed on the principle of Mechanical Engineering Test 4
(a)     electrostatic instrument Thermodynamics Online Model
(b)     thermocouple instrument Thermodynamics Online Quiz Qu
(c) moving iron instrument Answers
(d) electrodynamic instrument Thermodynamics Sample Mode
Ans: c Top 10 nuclear Power Engineerin
questions with answers
103. In an energy meter braking torque is produced to Top 10 Petroleum Refinery Engin
Interview Questions Answers
(a) safe guard it against creep
(b) brake the instrument Top 100 Switchgear and Protect
Questions
(c) bring energy meter to stand still
(d)     maintain steady speed and equal to driving torque TOP Chemical Process Multiple
Questions and Answers pdf
Ans: d
TOP Civil Engineering Multiple c
Questions and Answers
104. Various adjustments in an energy meter include
TOP Heat Transfer Multiple choi
(a)     light load or friction and Answers pdf
(b)     lag and creep TOP Materials And Construction
(c) overload and voltage compensation choice Questions and Answers p
(d) temperature compensation TOP Nuclear Power - Chemical E
(e) all of the above Multiple Choice Questions And A
Ans: e Transformers Online Quiz test Q
Transformers Quiz Questions an
105. The power of a n-phase circuit can be measured by using a minimum of Transmission and Distribution Q
(a) (n - 1) wattmeter elements and Answers
(b) n wattmeter elements Transmission and Distribution Q
(c) (n + 1) wattmeter elements Questions
(d) 2n wattmeter elements Tricky Chemical Engineering Pla
Ans: a Objective Type Questions And A
Tricky Chemical Process Multipl
106. Two holes in the disc of energy meter are drilled at the opposite sides of the spindle to Questions and Answers pdf
(a)     improve its ventilation Tricky Electronics And Commun
(b)     eliminate creeping at no load Enginnering Objective Type Ques
Answers pdf
(c) increase its deflecting torque
Tricky Fertilizer Technology Obje
(d) increase its braking torque Questions And Answers
Ans: b
Tricky Heat Transfer Multiple ch
Questions and Answers pdf
107. Which of the following is measured by using a vector voltmeter ? Tricky Industrial Engineering Obj
(a)     Amplifier gain and phase shift Questions And Answers pdf
(b)     Filler transfer functions Tricky Marine Engineering multip
(c) Complex insersion loss Questions And Answers
(d) All of the above Tricky Mass Transfer Multiple ch
Ans: d Questions and Answers pdf
Tricky Petroleum Refinery Engine
108. The principle on which vector voltmeter is based is Multiple choice Questions and A
(a) that it works on the principle of complex variation Tricky Process Control And Instr
(b) that it measures the response of linear ramp voltage Multiple choice Questions and A

(c) same as digital meter Tricky Process Equipment And P

Interview Questions And ANswe
(d) that it measures the amplitude of a single at two points and at the same time measures their phase difference
Tricky Process Equipment And P
Ans: d
Multiple choice Questions and A
Tunnel Engineering Interview Qu
109. To measure radio frequency, the suitable frequency meter is
(a) Weston frequency meter Tunnel Engineering Objective typ
(b) reed vibrator frequency meter and Answers
(c) heterodoxy frequency meter Tunnelling - Civil Engineering Qu
(d) electrical resonance frequency meter Answers
Ans: c viva questions for structural ana
Water Resources and Irrigation E
Water Resources Engineering an
Interview Questions
Water Resources Engineering an
Online Quiz Questions

Posted by Engineering Raju

Labels: Measurement and Instrumentation Quiz Questions and Answers

No comments:

Post a Comment

Enter your comment...

Comment as: Select profile...

Publish Preview

Newer Post Home Older Post

Subscribe to: Post Comments (Atom)

Popular Posts

250 TOP Fluid Mechanics - Mechanical Engineering Multiple choice Questions and Answers List
Latest Fluid Mechanics Questions and Answers pdf free download 1. Fluid is a substance that (a) cannot be subjected to shear forces ...

135 TOP Transformers - Electrical Engineering Multiple Choice Questions and Answers
Latest Transformers Interview Questions and Answers List 1.  Which of the following does not change in a transformer ? (a)  Current (b...

152 TOP Thermodynamics - Mechanical Engineering Multiple choice Questions and Answers List
Thermodynamics Questions and Answers pdf free download 1. Which of the following variables controls the physical properties of a perfect...

Electrical Engineering Multiple Choice Questions and Answers

Here you can find objective type Electrical Engineering questions and answers for interview and entrance examination.  Electrical Engineeri...

Mechanical Engineering Multiple Choice Questions and Answers List

Mechanical Engineering questions and answers with explanation for interview, competitive examination and entrance test. Fully solved exampl...

250 TOP I.C. Engines - Mechanical Engineering Multiple choice Questions and Answers List
I.C. Engines Questions and Answers pdf free download 1. The working cycle in case of four stroke engine is completed in following number...

109 TOP Measurement and Instrumentation - Electrical Engineering Multiple choice Questions and Answers
Latest Measurement and Instrumentation Questions and Answers List 1. The use of _____ instruments is merely confined within laboratories ...

124 TOP D.C. Generators - Electrical Engineering Multiple choice Questions and Answers
Latest D.C. Generators Interview Questions and Answers List 1. Laminations of core are generally made of (a)     case iron (b)     carbo...
150 TOP Soil Mechanics and Foundation Engineering - Civil Engineering Multiple choice Questions and Answers pdf
Latest Soil Mechanics and Foundation Engineering Questions and Answers 1. Residual soils are formed by a) glaciers b) wind c) water...

103 TOP Heat Transfer - Mechanical Engineering Multiple Choice Questions and Answers List
Latest Heat Transfer Questions and Answers pdf free download 1. Unit of thermal conductivity in M.K.S. units is (a) kcal/kg m2 °C (b) kc...

Powered by Blogger.