Submerged Arc Welding

Trade Name Spec Grade Current Polarity Sizes Port Office

ARGENTINA

Electrodos S.A.

Conarco S2Si / Esab OK ABS 3M dcep 4.0 mm Buenos Aires

Flux 10.71

AUSTRALIA

Lincoln Electric Company

L-60 / 761 ABS 2T, 3M dcep 4.0 mm Sydney

L-60 / 780 ABS 1T, 2M ac, dcep 4.0 mm Sydney

L-60 / 860 ABS 2T, 3M dcep 4.0 mm Sydney

L-61 / 780 ABS 3YTM dc 4.0 mm Sydney

L-61 / 8500 ABS 3M dcep 4.0 mm Sydney

L-61 / 860 ABS 3YTM ac, dcep 4.0 mm Sydney

L-S3 / 8500 ABS 4YM dcep 4.0 mm Sydney

AUSTRIA

Böhler Schweisstechnik Austria GmbH

Böhler CN 22/9 N-UP / flux AWS A5.9-93 ER2209 dcep 2.0 - 4.0 mm Essen
BB 202
Recommended by mfr. for welding austneitic-ferritic steel (Duplex), UNS no. S31803 (and similar) & for welding these alloys to Grade AH36 (C-Mn Steel).
Mfr's Guaranteed min., Grade UNS S31803 to AH36: T.S. 500 MPa; ISO-V at -20 °C, 47 J.

Böhler EMS2 CrMo / flux ABS ^ dcep 2.0 - 4.0 mm Essen

BB25
^ Intended for use with low alloy high-temp. steels, subject to special approval with each application.

Böhler EMS3 / flux UV AWS A5.17-97 F48A6-EH12K dcep 4.0 mm Essen

418TT
Intended for multirun technique on Grade DH36. Test temp.: -60°C

x
See also Böhler Thyssen Schweisstechnik Deutschland GmbH

BRAZIL

Belgo Bekaert Arames S.A.

BMAS 122 / OK Flux 10.71 ABS 3YTM dcep 2.0 - 6.35 mm São Paulo

CarboOx Resende Quimica Industria e Comercio Ltda.

WL12 / Flux 108N AWS A5.17/M-97 F7A0-EL12 / F48A0 - dcep 3.97 mm São Paulo
EL12
WM12K / Flux 105 AWS A5.17/M-97 F7A2-EM12K / dcep 3.97 mm São Paulo
F48A3 - EM12K
WM12K / Flux DX AWS A5.17/M-97 F7A4-EM12K, dcep 3.97 mm São Paulo
F48A4-EM12K

31/Oct/2005 Approved Welding Consumables II - 1 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

BRAZIL

CarboOx Resende Quimica Industria e Comercio Ltda.

WM12K / Flux DX-11 AWS A5.17/M-97 F7A4-EM12K / dcep 3.97 mm São Paulo
F48A4 - EM12K

Esab S.A. Industria e Comercio

OK Autrod 12.20 / OK Flux ABS 3YTM dcep 2.0 - 6.35 mm São Paulo
10.71

Gerdau Aços Longos S.A.

Gerdau Arc-EL12 / OK Flux AWS A5.17-97 F6A2-EL12 dcep 3.97 mm São Paulo
10.71
Gerdau-Arc EM12K / OK ABS 3YM dcep 1.59 - 4.76 mm São Paulo
Flux 10.71

Lincoln Electric do Brasil Indústria e Comércio Ltda.

Lincolnweld 780 - EM12K ABS 3YTM ac / dcep 2.4 - 4.76 mm São Paulo

Lincolnweld 860 / EM12K ABS 3YTM ac / dcep 2.4 - 4.76 mm São Paulo

CANADA

Lincoln Electric Co. of Canada Ltd.

L-60 / 761 ABS 3YM, 2YT dcep 4.0 - 6.0 mm Montreal

CHINA, PEOPLES REPUBLIC OF

Atlantic China Welding Consumables (China Welding Electrode Plant)

H08A / CHF43 ABS 2T, 3M ac / dcep 4.0 - 5.8 mm Guangzhou

H10Mn2 / CHF101 ABS 3YM ac / dcep 4.0 - 5.8 mm Guangzhou

Changzhou Huatong Welding Wire Co., Ltd.

HTM-10Mn-2 / CHF101** ABS 3YM dcep 2.0 - 5.0 mm Shanghai

**Note: Wire HTM-10Mn2 to be used together with flux CHF101 manufactured by China Welding Electrode Plant.

Dalian Jinguang Welding Wire Factory

BSH08A / LT431** ABS 2TM ac 4.0 - 4.8 mm Guangzhou

BSH08MnA / LT350** ABS 2YTM ac 4.0 - 4.8 mm Guangzhou

**Maximum plate thickness 18 mm for two-run technique. Flux manufactured by Longtou Welding Flux Factory approved by ABS

Jinzhou Jin Tai Welding & Metal Co. Ltd.

JW-1 / SJ101** ABS 3YM dcep 2.4 - 4.8 mm Guangzhou

JW-2 / SJ501** ABS 2YM dcep 2.4 - 4.8 mm Guangzhou

JW-3 / SJ101** ABS 3YM dcep 2.4 - 4.8 mm Guangzhou

31/Oct/2005 Approved Welding Consumables II - 2 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

CHINA, PEOPLES REPUBLIC OF

Jinzhou Jin Tai Welding & Metal Co. Ltd.

x
**Note: the fluxes SJ101 and SJ501 are manufactured by Jinzhou Swan Welding Consumable Co. Ltd. and approved by ABS.

Jinzhou Swan Welding Consumable Co., Ltd.

JH-H10Mn2 (JW-1) / ABS 3YM** ac / dcep 4.0 mm Guangzhou

JH-SJ101
**Meets Mechanical Properties of AWS A5.17-97 F7A4-EH14

JH-H10Mn2 (JW-1) / AWS A5.17-97 ** ac / dcep 4.0 mm Guangzhou

JH-SJ101G
**Meets Mechanical Properties of AWS A5.17-97 F7A4-EH14

JH-HO8A (JW-2) / ABS 2YM** ac / dcep 4.0 mm Guangzhou

JH-SJ501
**Meets Mechanical Properties of AWS A5.17-97 F7AZ-EL8

x
**Note: the wires H10Mn2 (JW-1) and H08A (JW-2) are manufactured by Jinzhou Jin Tai Welding & Metal Co. Ltd. and approved by ABS.

Shanghai Baogang Metallurgy Construction Corp.

BD.FCB-1W** ABS 2Y ac 4.8 - 6.4 mm Shanghai

**Wire BD-FCB-1W to be used together with flux DQ.FCB-1+DQ.FCB-1R manufactured by Shanghai Dongqiao Welding Material Co. Ltd., maximum plate
thickness 20mm

BHM-1 (H08A)** ABS 3M ac 2.5 - 5.0 mm Shanghai

**Wire BHM-1 to be used together with flux SH43-1 manufactured by Shanghai Welding Equipments & Consumables Co. Ltd.

BHM-4 (H10Mn2)** ABS 3YM ac 2.5 - 5.0 mm Shanghai

**Wire BHM-4 to be used together with flux SH331 manufactured by Shanghai Welding Equipments & Consumables Co. Ltd.

BHM-5 (H10Mn2G)** ABS 3YM ac 2.5 - 5.0 mm Shanghai

**Wire BHM-5 to be used together with flux SH331 manufactured by Shanghai Welding Equipments & Consumables Co. Ltd.

Shanghai Dongqiao Welding Material Co. Ltd.

BD.FCB-1W / ABS 2Y ac 4.8 - 6.4 mm Shanghai

DQ.FCB-1+DQ.FCB-1R**
BHM-1 (H08A) / ABS 3M ac / dc 4.0 - 5.0 mm Shanghai
DQ.SJ101**
BHM-4 (H10Mn2) / ABS 3YM ac / dc 4.0 - 5.0 mm Shanghai
DQ.SJ101**
BHM-4 (H10Mn2) / AWS A5.17/A5.17M-97 F48A4-EH14 ac / dc 4.0 - 5.0 mm Shanghai
DQ.SJ101**
x
**Manufacturer of flux: Shanghai Dongqiao Welding Material Co. Ltd. Manufacturer of wire: Shanghai Baogang Metallurgy Construction Corp. - Kunshan
Welding Wire Factory

Shanghai Welding Equipments & Consumables Co., Ltd.

SH.H08A / SH43 ABS 2TM ac / dc 3.0 - 5.0 mm Shanghai

SH.H10 Mn2G / SH331 ABS 2YTM, 3YM ac / dc 3.0 - 5.0 mm Shanghai

31/Oct/2005 Approved Welding Consumables II - 3 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

CHINA, PEOPLES REPUBLIC OF

Taizhou Universe Welding Material Co., Ltd.

TH-08A / TH-SJ201 ABS 3M ac / dc 2.5 - 5.0 mm Guangzhou

Tianjin Golden Bridge Welding Materials Co., Ltd.

JQ.H08A / JQ.SJ301 ABS 3M ac / dc 2.5 - 5.0 mm Guangzhou

JQ.H08MnA / JQ.SJ301 ABS 3M ac / dc 2.5 - 5.0 mm Guangzhou

JQ.H10Mn2 / JQ.SJ301 ABS 3YM ac / dc 2.5 - 5.0 mm Guangzhou

Tien Tai Electrode (Kunshan) Co., Ltd.

TW-308L / TFS-300 ** dcep 2.4 - 4.0 mm Shanghai

**Mfr's guaranteed properties: Ultimate tensile strength > 520 MPa, yield strength > 290 MPa, % elongation > 35%, CVN energy > 47 J @ -20°C, chemical
composition C max 0.04%; Cr 18.0-21.0%; Ni 9.0-11.0%

TW-316L / TFS-300 ** dcep 2.4 - 4.0 mm Shanghai

**Mfr's guaranteed properties: Ultimate tensile strength > 490 MPa, yield strength > 290 MPa, % elongation > 30%, CVN energy > 47 J @ -20°C, chemical
composition C max 0.04%; Cr 17.0-20.0%; Ni 11.0-14.0%; Mo 2.0-3.0%

Wuhan Marine Machinery Plant (Wuhan Marine Welding Consumables F

H08A** ABS 2M ac / dcep 2.0 - 5.0 mm Guangzhou

**Wire H08A to be used together with flux SH43-1 manufactured by Shanghai Welding Electrode Flux Co., Ltd. which has been approved by ABS.

COLOMBIA

Electromanufacturas S.A.

WA-60 / 780 ABS 1TM dcep 1.5 - 4.0 mm Cartagena

WA-61 / 780 ABS 1TM dcep 1.5 - 4.0 mm Cartagena

CZECH REPUBLIC

Esab Vamberk s.r.o.

OK Autrod 12.20 / OK Flux ABS 3M, 3YM ac / dc 2.5 - 6.0 mm Pilsen

10.40
OK Autrod 16.86 / OK Flux Stainless** dcep 1.6 - 5.0 mm Pilsen
10.93
**For welding of Duplex stainless steel; Manufacturer's guaranteed min. properties Y.S. 480 N/mm2, T.S. 680 N/mm2, El. 25%, CVN > 47 J @ -20 °C

OK Autrod 2209 / OK Flux Stainless** dcep 1.6 - 5.0 mm Pilsen

10.93
**For welding of Duplex stainless steel; Manufacturer's guaranteed min. properties Y.S. 480 N/mm2, T.S. 680 N/mm2, El. 25%, CVN > 47 J @ -20 °C

EGYPT

Egyptian Swedish Welding Electrodes Co.

ESWECO ES1L / P181 ABS 1YM ac 4 mm Cairo

31/Oct/2005 Approved Welding Consumables II - 4 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

EGYPT

Egyptian Swedish Welding Electrodes Co.

ESWECO ES1M / P171 ABS 3YM ac 4 mm Cairo

ESWECO ES1M / P181 ABS 2YM ac 4 mm Cairo

FRANCE

Lincoln Electric Company SA Europe

IMT6 / 8500 ABS 3YTM dcep 3.5 - 5.0 mm Le Havre

IMT9 / 780 ABS 3YTM ac / dc 2.5 - 4.0 mm Le Havre

L50M (LNS133U) / 781 ABS 4Y400T dcep 4.0 mm Le Havre

L50M (LNS133U) / 782 ABS 4Y400T dcep 4.0 mm Le Havre

L50M / 781 ABS 4Y400T ac / dc 2.5 - 5.0 mm Le Havre

L50M / 8500 ABS 3YTM dcep 3.5 - 5.0 mm Le Havre

L60 / 780 ABS 2T, 2YTM dcep 4.0 - 5.0 mm Le Havre

L61 / 761 ABS 3YM, 2YT dcep 4.0 - 5.0 mm Le Havre

L61 / 860 ABS 3YM, 2YT dcep 4.0 - 5.0 mm Le Havre

L61 / P230 ABS 3M, 3YM ac / dc 2.0 - 7.0 mm Le Havre

L70 / 761 ABS 2YTM ac / dc 2.5 - 5.0 mm Le Havre

LNS129 / P230 ABS 3M, 3YM ac / dc 2.0 - 7.0 mm Le Havre

LNS133U / P240 ABS 3M, 3YM** dcep 3.25 - 5.0 mm Le Havre

**Manufacturer's guaranteed minimum CVN 47 J at -40°C.

LNS140A / 761 ABS 2YTM ac / dc 2.5 - 5.0 mm Le Havre

LNS140A / 8500 ABS 3YM dcep 2.5 - 4.0 mm Le Havre

LNS140A / P230 ABS 3YM, 2YT dcep 2.5 - 4.0 mm Le Havre

Sauvageau Commercy Soudure

SP 1000 / CY 95 ABS 3YTM dcep 4.0 mm Mulhouse

SP1050 / CY20 ABS 3YM dcep 4.0 mm Mulhouse

Soudure Autogene Francaise

AS 35 / AS 450 ABS 3YTM dcep 4.0 mm Mulhouse

AS 35 / AS 461 ABS 3YM ac / dcep 2.4 - 4.8 mm Mulhouse

AS 36 / AS 80 ABS 3YM ac / dcep 2.4 - 5.0mm Mulhouse

AS 40A / AS 461 ABS 3YM ac / dcep 2.4 - 5.0 mm Mulhouse

31/Oct/2005 Approved Welding Consumables II - 5 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

FRANCE

Soudure Autogene Francaise

Lexal S 22 9 3 N / F-500 ** ac / dc 3.2 mm Mulhouse

**Manufacturer's guaranteed properties: 750-900 MPa tensile strength; 550 MPa min. yield strength; 24% min. elongation; CVN 40 J min. at -30°C

GERMANY

Bavaria Schweisstechnik GmbH

EH12K (S3Si) / BF 5.1 ABS 4YM ac / dc 2.0 - 6.0 mm Munich

Flux grain size is 2 - 20. Bavaria Schweisstechnik BF 5.1 flux was qualified using Hermann Fliess & Co. GmbH wire EH12K of AWS A5.17 / S3Si of EN 760.

Böhler Thyssen Schweisstechnik Deutschland GmbH

Thermanit 22/09 / Marathon AWS A5.9-93 ER2209 dcep 2.0 - 4.0 mm Essen
431
Recommended by mfr. for welding austneitic-ferritic steel (duplex), UNS no. S31803 (and similar) & for welding these alloys to Grade AH36 (C-Mn Steel).
Mfr's guaranteed min., Grade UNS S31803 to AH36: T.S. 500 N/mm2; ISO-V @ -20 °C, 47 J.

Union S2 / UV 306 ABS 2M, 2YM ac / dcep 2.0 - 5.0 mm Essen

The Welding Consumable Manufacturer is qualified in accordance with ABS Quality Assurance Approval

Union S2 / UV 400 ABS 3YTM ac / dcep 2.0 - 5.0 mm Essen

Two-run technique limited to max. 20 mm plate thickness.

Union S2Mo / UV 400 ABS 3YT, 4YM ac / dcep 2.0 - 5.0 mm Essen

Union S2Ni2.5 / UV 421TT AWS A 5.23-97 F7A10-ENi2-Ni2 3.0 - 5.0 mm Essen

Union S2Ni2.5 / UV 421TT AWS A 5.23-97 F7P10-ENi2-Ni2 3.0 - 5.0 mm Essen

x
See also Böhler Schweisstechnik Austria GmbH. The manufacturer is qualified in accordance with ABS Quality Assurance Approval.

Drahtzug Stein Wire & Welding GmbH

SDA S2 / ST55 ABS 3YM dcep 1.6 - 4.0 mm Essen

Topcore 731 B / ST55 ABS 3YM dcep 1.6 - 4.0 mm Essen

Topcore 735 B / 2D / SDA2 ABS 3YTM dcen 1.6 - 4.0mm Essen

/ ST55

Oerlikon Schweisstechnik GmbH

Fluxocord 31 / OP 121TT ABS 3M dcep 2.4 - 5.0 mm Venice

Fluxocord 31 / OP 180S ABS 2YT, 3YM dcep 2.4 - 4.0 mm Venice

For two-run technique, maximum plate thickness 20 mm.

OE-A 105 / Fluxocord ABS 3YT ac / dcep 3.2 - 5.0 mm Essen

35.25-2D / OE-A 105 / OP
122
Two-wire tandem technique, limited to 25 mm plate thickness.

31/Oct/2005 Approved Welding Consumables II - 6 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

GERMANY

Oerlikon Schweisstechnik GmbH

OE-A 105 / Fluxocord ABS 3YT ac / dcep 3.2 - 5.0 mm Essen

35.25-2D / OE-A 105 / OP
122 FB
Two-wire tandem technique, limited to 25 mm plate thickness.

OE-A 105 / Fluxocord ABS 3YTM ac / dcep 3.2 - 5.0 mm Essen

35.25-3D / OE-A 105 / OP
122
Three-wire tandem technique, limited to 25 mm plate thickness.

OE-A 105 / Fluxocord ABS 3YTM ac / dcep 3.2 - 5.0 mm Essen

35.25-3D / OE-A 105 / OP
122 FB
Three-wire tandem technique, limited to 25 mm plate thickness.

OE-S1 / OP 181 ABS 1T, 2YM ac / dcep 2.0 - 6.0 mm Essen

OE-S1 / OP 181S ABS 2TM ac 4.0 - 5.0 mm Essen

For Grade 2T, application for maximum plate thickness of 20 mm.

OE-S2 / OP 120TT ABS 3YM ac 4.0 - 5.0 mm Essen

OE-S2 / OP 122 ABS 3YTM ac / dcep 2.0 - 5.0 mm Essen

OE-S2 / OP 122 FB ABS 3YTM ac / dcep 2.0 - 5.0 mm Essen

OE-S2 / OP 181 ABS 3YT, 3YM dcep 2.0 - 6.0 mm Essen

Two-wire tandem technique, limited to 25 mm plate thickness.

OE-S2 / OP 181S ABS 2YT, 3YM ac 4.0 - 5.0 mm Essen

For Grade 2YT, application for maximum plate thickness of 20 mm.

OE-S2 Mo / OP 121TT ABS 3YM, 3YT ac / dcep 2.0 - 5.0 mm Essen

Two-run technique up to 20 mm plate thickness. Multi-run technique recommended by manufacturer for low temperature service, CVN min. 28 J at -50°C.

OE-SD3 / OP 121TT ABS 3YM ac / dcep 2.0 - 6.0 mm Essen

Multi-run technique recommended by manufacturer for low temperature service (-40 °C).

OE-SD3 / OP 41TT ABS 3YM dcep 4.0 mm Essen

HUNGARY

Esab Mor Kft.

OK Autrod 12.10 / OK Flux ABS 3M ac / dcep 2.0 - 4.0 mm Rijeka

10.71
OK Autrod 12.20 / OK Flux ABS 3M, 3YM ac / dcep 2.0 - 4.0 mm Rijeka
10.71
OK Autrod 12.20 / OK Flux ABS 2TM, 2YTM ac / dc 2.0 - 4.0 mm Rijeka
10.81
OK Autrod 12.22 / OK Flux ABS 4Y400M ac / dcep 2.0 - 4.0 mm Rijeka
10.71
OK Autrod 12.22 / OK Flux ABS 3Y400M ac / dc 1.2 - 5.0 mm Gothenburg
10.78
OK Autrod 12.22 / OK Flux ABS 3Y400M ac / dc 1.2 - 5.0 mm Gothenburg
10.88

31/Oct/2005 Approved Welding Consumables II - 7 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

HUNGARY

Esab Mor Kft.

OK Autrod 12.24 / OK Flux ABS 3TM, 3YTM ac / dcep 2.0 - 4.0 mm Rijeka
10.71
SpoolArc 81/ OK Flux 10.71 ABS 4Y400M ac / dcep 2.0 - 4.0mm Rijeka

INDIA

Ador Welding Ltd. (Ahmednagar)

Automelt Grade A / ABS 2M dcep 2.5 - 5.0 mm Mumbai

Automelt Grade II
Automelt Grade C / ABS 3YM dcep 2.5 - 5.0 mm Mumbai
Automelt Grade IV

Esab India Ltd. (Chennai)

OK Autrod 12.08L / OK ABS 3M dcep 3.15 - 5.0 mm Madras

Flux 10.71L
OK Autrod 12.08L / OK ABS 2M dcep 2.5 - 5.0 mm Madras
Flux 10.81

INDONESIA

P.T. Karya Yasantara Cakti

OK Autrod 12.10 / OK Flux ABS 3M ac / dc 2.0 - 5.0 mm Jakarta

10.71
OK Autrod 12.20 / OK Flux ABS 3M, 3YM ac / dc 2.0 - 6.0 mm Jakarta
10.71
OK Autrod 12.20 / OK Flux ABS 2TM, 2YTM ac / dc 2.0 - 4.0 mm Jakarta
10.81
OK Autrod 12.22 / OK Flux ABS 4Y400M ac / dc 2.0 - 5.0 mm Jakarta
10.71
OK Autrod 12.22 / OK Flux ABS 3Y400M ac / dcep 2.0 - 5.0 mm Gothenburg
10.78
OK Autrod 12.22 / OK Flux ABS 3Y400M ac / dcep 2.0 - 5.0 mm Gothenburg
10.88
OK Autrod 12.24 / OK Flux ABS 3TM, 3YTM ac / dcep 2.0 - 5.0 mm Jakarta
10.71

ITALY

Esab Saldatura S.p.A.

OK Autrod 12.24 / OK Flux ABS 3TM, 3YTM ac / dcep 2.4 - 6.0 mm Milan
10.71
OK Autrod 12.24 / OK Flux ABS 3Y ac / dc 2.4 - 6.0 mm Milan
10.71 / OK 10.69 (one side)

ETC Elettrotermochimica S.r.l.

ETC FX46R / ETC AS2 ABS 3YM dcep 2.4 - 6.0 mm Venice

31/Oct/2005 Approved Welding Consumables II - 8 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

ITALY

FRO SRL

AS 231 / AS 35 ABS 2T, 2YT ac 2 - 4.8 mm Milan

AS 231 / AS 36 ABS 3Y Fillet ac 2 - 4.8 mm Milan

AS 461 / AS 35 ABS 2YT ac 2 - 4.8 mm Milan

AS 461 / AS 35 ABS 3YM ac / dcep 2 - 4.8 mm Milan

AS 461 / AS 40A ABS 3Y (One Side) ac 2 - 4.8 mm Milan

AS 461 / AS 40A ABS 3YM ac / dcep 2 - 4.8 mm Milan

AS 461 / AS 40A ABS 3YM Fillet ac / dcep 2 - 4.8 mm Milan

AS 461 / AS 40A ABS 3YT ac 2 - 4.8 mm Milan

AS 461 / AS 67 ABS 3Y (One Side) ac 2 - 4.8 mm Milan

Fluxocord 31 / OP 121 TT ABS 3M dcep 2.4 - 5.0 mm Venice

Fluxocord 31 / OP 180 S ABS 3YM, 2YT dcep 2.4 - 4.0 mm Venice

For two-run technique maximum plate thickness 20 mm.

Fluxocord 42 / OP 121 TT ABS 5YQ690M dcep 2.4 - 4.0 mm Venice

W

SIAT S.p.A. Sezione Pittarc

Pittarc S2 / Pittarc FL 180F ABS 2T, 2YT ac 2 - 4.8 mm Milan

JAPAN

JFE Steel Corporation

KW-43 / KB-14 ABS 3TM ac 2.4 - 6.4 mm Yokohama

KW-43 / KB-50 ABS 3TM, 3YTM ac 2.4 - 6.4 mm Yokohama

KW-43B / KB-155 ABS 2YT ac 2.4 - 6.4 mm Yokohama

Kobe Steel Ltd., Fukuchiyama Plant

KW-101B (X2) / KB-110 ABS 3YT ac 4.0 - 4.8 mm Kobe

Manufacturer's guaranteed min. CVN 27 J at -60 °C

KW-101B / KB-110 ABS 3TM, 3YTM ac 4.8 mm Kobe

Manufacturer's guaranteed min. CVN 27 J at -60 °C

KW-50 / KB-51 ABS 3TM, 3YTM ac 4.8 mm Kobe

KW-55 (X2) / KB-156 ABS 2YT ac 4.0 - 4.8 mm Kobe

US-255 (X2) / PFI-50LT / ABS 3, 3Y** ac/dcep 3.2 - 6.4 mm Kobe

MF-1R
**Manufacturer's guaranteed minimum CVN 3.5 Kgf-m at -60 °C. suitable for one side welding with twin wires

31/Oct/2005 Approved Welding Consumables II - 9 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

JAPAN

Kobe Steel Ltd., Fukuchiyama Plant

US-255 (X2) / PFI-50LT / ABS 4Y400^ ac/ac or ac/dcep 3.2 - 6.4 mm Kobe
RR-3
^ Manufacturer's guaranteed minimum CVN 41 J at -60 °C. Approval subject to satisfactory procedure tests at user's plant. Plate thickness to be welded:
maximum 20 mm. Suitable for one side welding.

US-255 (X4) / PFI-50LT / ABS 3^, 3Y^ ac / dcep 3.2 - 6.4 mm Kobe
PFI-50R (backing flux)
^ Manufacturer's guaranteed minimum CVN 41 J at -60 °C. Approval subject to satsfactory procedure test at user's plant. Suitable for one side welding with
four wires.

US-255 / PFI-50LT / RR-3 ABS 4Y400^ ac 3.2 - 6.4 mm Kobe

^ Manufacturer's guaranteed minimum CVN 41 J at -60 °C. Approval subject to satisfactory procedure tests at user's plant. Plate thickness to be welded:
maximum 16 mm. Suitable for one side welding.

US-36 (X2) / PFH-52 ABS 2T, 2YT ac 4.0 - 6.4 mm Kobe

US-36 (X2) / PFH-55EM / ABS 3^, 3Y^ ac / dc 4.8 - 6.4 mm Kobe

PFI-50R
^ One-side welding; approval subject to satisfactory procedure tests at user's plant

US-36 (X2) / PFH-55LT ABS 4YM** ac/dcep or ac/ac 2.4 - 6.4 mm Kobe
**Manufacturer's guaranteed minimum CVN 34 J at -60 °C

US-36 (X2) / PFI-55E ABS 3Y ac / dcep 4.8 - 6.4 mm Kobe

US-36 (X3) / PFH-55E / ABS 2, 2Y ac / dc 3.2 - 6.4 mm Kobe

RF-1
US-36 (X3) / PFH-55EM / ABS 3^, 3Y^ ac / dc 4.8 - 6.4 mm Kobe
PFI-50R
^ One-side welding; approval subject to satisfactory procedure tests at user's plant

US-36 (X3) / PFI-55E ABS 3Y ac / dcep 4.8 - 6.4 mm Kobe

US-36 (X4) / PFH-55EM / ABS 3, 3Y^ ac / dcep 4.0 - 6.4 mm Kobe

PFI-50R
US-36 (X4) / PFI-55E / ABS 3^, 3Y^ ac / dcep 4.0 - 6.4 mm Kobe
PFI-50R
US-36 / G-60 ABS 1T ac 2.4 - 7.9 mm Kobe

US-36 / G-80 ABS 2M ac 2.0 - 6.4 mm Kobe

US-36 / MF-300 ABS 2T, 3M, 2YT, 3YM ac 1.6 - 6.4 mm Kobe

US-36 / MF-38 ABS 2T, 3M, 2YT, 3YM ac / dcep 2.4 - 7.9 mm Kobe

US-36 / MF-38 / Metal ABS 3^ ac / dcep 2.4 - 7.9 mm Kobe

Powder RR-2
US-36 / MF-44 ABS 2T, 2YT ac 1.6 - 6.4 mm Kobe

US-36 / MF-53 ABS 2T, 2YT** ac 1.6 - 4.8 mm Kobe

**For fillet welding only.

US-36 / PFH-52 ABS 2T, 2YT ac 4.0 - 6.4 mm Kobe

US-36 / PFH-55E ABS 3TM, 3YTM, ac 2.0 - 6.4 mm Kobe

3Y400TM

31/Oct/2005 Approved Welding Consumables II - 10 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

JAPAN

Kobe Steel Ltd., Fukuchiyama Plant

US-36 / PFH-55LT ABS 3M, 3YM** ac 2.0 - 6.4 mm Kobe

**Manufacturer's guaranteed min. CVN 5.5 kgf-m (54 J) at -60 °C.

US-36 / PFI-52E / Metal ABS 3^, 3Y^ ac 2.4 - 7.9 mm Kobe

Powder RR-2
^For use with one-side single or tandem process.

US-36 / PFI-52N / Metal ABS 3^, 3Y^ ac 2.4 - 7.9 mm Kobe

Powder RR-2
US-36 / US-43 (X2) / ABS 2^, 2Y^ ac / dcep 4.8 - 6.4 mm Kobe
PFI-50M / Metal Powder
RR-2
US-36/ PFI-55E/ PFI-50R ABS 3^, 3Y^ ac 2.4 - 7.9 mm Kobe
^For use with one-side single or tandem process.

US-36J / PFH - 55AS ABS 5Y400H5 dc 3.2 - 4.8 mm Kobe

US-40 (X2) / PFH-55LT ABS 4Y400T** ac/dcep or ac/ac 3.2 - 4.8 mm Kobe
**Manufacurer's guaranteed minimum CVN 41J at -60 °C. Plate thickness to be welded: Maximum 20 mm

US-40 / MF-100N ABS 3T, 3YT** ac 3.2 - 4.8 mm Kobe

**Manufacturer's guaranteed minimum CVN 3.0 kgf-m (29 J) at -60 °C.

US-40 / MF-38 ABS ** ac 2.4 - 4.8 mm Kobe

**Manufacturer's guaranteed multi-run technique weld metal minimum properties: T.S. 608-735 MPa, Y.P. 490 MPa, El. 20%, CVN 3.5 kgf-m (34 J) at -30 °C

US-40 / PFH-50LT ABS 3T, 3YT** ac 3.2 - 4.8 mm Kobe

**Manufacturer's guaranteed minimum CVN 3.5 kgf-m at -60 °C. Maximum plate thickness 25 mm with single or tandem process.

US-40 / PFH-55LT ABS 4Y400T** ac 3.2 - 4.8 mm Kobe

**Manufacturer's guaranteed minimum CVN 41 J at -60 °C. Plate thickness to be welded: Maximum 20 mm

US-43 (X2) / PFI-52 / Metal ABS 3^, 3Y^ ac / dcep 2.4 - 7.9 mm Kobe
Powder RR-2
For one-side tandem welding process.

US-43 / PFH-45 ABS 3TM ac 2.4 - 7.9 mm Kobe

US-43 / PFH-60A ABS 3TM, 3YTM ac / dcep 2.4 - 7.9 mm Kobe

US-43 / PFI-45 / Metal ABS 3^ ac / dc 2.4 - 7.9 mm Kobe

Powder RR-2
US-43 / PFI-50 ABS 3TM, 3YTM ac / dcep 2.4 - 7.9 mm Kobe

US-43 / PFI-50 / Metal ABS 3^, 3Y^ ac / dc 2.4 - 7.9 mm Kobe

Powder RR-2
US-49 (X3) / PFH-55E / ABS 3, 3Y ac, dc 4.8, 6.4 mm Kobe
RF-1
US-49 / MF-38 ABS 4YM ac 4.8 mm Kobe

US-49 / PFH-55E ABS 3, 3Y** ac / dcep 3.2 - 6.4 mm Kobe

**Manufacturer's guaranteed minimum CVN 3.5 Kgf-m at -30 °C. Suitable for one-side welding with multiple wire.

US-49A / MF-38 ABS 4YM ac 4.8 mm Kobe

US-80LT / PFH - 80AS ABS 4YQ690 dcep 3.2 - 4.0 mm Kobe

31/Oct/2005 Approved Welding Consumables II - 11 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

JAPAN

Nippon Steel & Sumikin Welding Co., Ltd.

Nittetsu NES-53 / Nittetsu ABS 3^, 3Y^ ac / dcep 2.8 - 3.2 mm Yokohama
YF-15I / Nittetsu SES-15
^ Consumable nozzle (8 - 12 mm size) electroslag welding of plates without intentionally added Nb.

Nittetsu Y-80M / Nittetsu ** ac 2.4 - 4.8 mm Yokohama

NB-250H
**Manufacturer's guaranteed multi-run technique weld metal minimum properties: T.S. 785 N/mm2, Y.S. 690 N/mm2, El. 16%, CVN 50 J at -60°C

Nittetsu Y-A (X2) / Nittetsu ABS 2^, 2Y^ ac 2.4 - 8.0 mm Yokohama
NSH-50 / Nittetsu NSH-1R
^ Suitable for one side welding with tandem arc process

Nittetsu Y-A (X3) / Nittetsu ABS 2^, 2Y^ ac 4.8 - 6.4 mm Yokohama
NSH-50/1R
^ Suitable for one side welding with tandem arc process

Nittetsu Y-A (X4) / Nittetsu ABS 2^, 2Y^ ac 4.8 - 6.4 mm Yokohama
NSH - 50/1R
^ Suitable for use with multi-arc tandem one-side welding.

Nittetsu Y-A / Nittetsu ABS 3TM ac 2.4 - 8.0 mm Yokohama

YB-100
Nittetsu Y-A / Nittetsu ABS 3TM, 3YTM ac 2.4 - 8.0 mm Yokohama
YB-150
Nittetsu Y-B / Nittestu ABS 3TM ac 2.4 - 8.0 mm Yokohama
YF-15
Nittetsu Y-C / Nittestu ABS 3TM ac 2.4 - 8.0 mm Yokohama
YF-15
Nittetsu Y-C / Nittetsu Y-A ABS 2^, 2Y^ ac 4.8 - 6.4 mm Yokohama
(X2) / Nittetsu NSH-50 /
NSH-1R
^ Suitable for use with multi-arc tandem one-side welding

Nittetsu Y-CM / Nittetsu ABS 2^, 2Y^ ac / dcep 2.4 - 3.2 mm Yokohama
SES-15 / Nittetsu YF-15
^ Consumable nozzle (8.0 - 12.0 mm size) electroslag welding.

Nittetsu Y-CM / Nittetsu ABS 3TM, 3YTM ac 2.4 - 8.0 mm Yokohama

YF-15
Nittetsu Y-D (X2) / Nittetsu ABS 3TM, 3YTM ac 2.4 - 6.4 mm Yokohama
NB-55E
Nittetsu Y-D / Nittetsu ABS 3TM, 3YTM ac 2.4 - 6.4 mm Yokohama
NB-55E
Nittetsu Y-D / Nittetsu ABS 3M, 3YM** ac 4.0 - 4.8 mm Yokohama
NB-55L
**Manufacturer's guaranteed avg. CVN 40 J at -60°C.

Nittetsu Y-D / Nittetsu NF-1 ABS 3TM, 3YTM ac 3.2 - 4.8 mm Yokohama
Maximum plate thickness of 20 mm for two-run technique.

Nittetsu Y-D / Nittetsu ABS 3TM, 3YTM ac 2.4 - 4.8 mm Yokohama

NF-310
Maximun plate thickness of 20 mm for two-run technique.

Nittetsu Y-D / Nittetsu ABS 2T, 3M, 2YT, 3YM ac 2.4 - 8.0 mm Yokohama
YF-15

31/Oct/2005 Approved Welding Consumables II - 12 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

JAPAN

Nippon Steel & Sumikin Welding Co., Ltd.

Nittetsu Y-D / Nittetsu ABS 2M, 2YM ac 1.2 - 8.0 mm Yokohama

YF-800
Nittetsu Y-DL (X2) / Nittestu ABS 3M, 3YM ac 2.4 - 6.4 mm Yokohama
YF-15
Nittetsu Y-DL (X4) / Nittestu ABS 3Y ac 4.8 - 6.4 mm Yokohama
NSH-50M / Nittetsu
NSH-1RM / Nittetsu YK-D**
**Suitable for use with multi-arc one-side welding.

Nittetsu Y-DL (X4) / Nittestu ABS 2Y^ ac 4.8 - 6.4 mm Yokohama

NSH-50M / Nittetsu
NSH-1RM**
**Suitable for use with multi-arc one-side welding.

Nittetsu Y-DL / Nittestu ABS 3M, 3YM ac 2.4 - 6.4 mm Yokohama

YF-15
Nittetsu Y-DM3 / Y-A (X2) / ABS 3Y400** ac 4.8 - 6.4 mm Yokohama
Nittestu NSH-55E / Nittetsu
NSH-1R
**Suitable for use with multi-arc tandem one-side welding

Nittetsu Y-DS / Nittetsu ABS 3Y400M ac 4.0 - 4.8 mm Yokohama

NB-55
Nittetsu Y-DS / Nittetsu ABS 2T, 2YTM ac 2.4 - 6.4 mm Yokohama
NF-100
Nittetsu Y-E / Nittetsu ABS 3TM, 3YTM ac 2.4 - 4.8 mm Yokohama
NF-310
Nittetsu Y-E / Nittetsu ABS 3TM, 3YTM** ac 2.4 - 4.8 mm Yokohama
NF-310
**Manufacturer's guaranteed minimum properties, CVN 3.0 kgf-m at -60 °C. For two run technique, maximum plate thickness of 20 mm.

x
^ Approval subject to satisfactory procedure tests at user's plant.

Nippon Welding Rod Co., Ltd. (Hamakita)

WEL SUB 316L / WEL SUB AWS A5.9-93 ER316L ac 4.0 mm Yokohama
F-6

Taseto Co., Ltd.

UW 309MoL / TUF300 AWS A5.9-93 ER309LMo ac / dcep 4.0 mm Yokohama

Manufacturer's guaranteed multi run technique weld metal joint minimum properties: TS 550 MPa

KOREA

Chosun Welding Co., Ltd. (Onsan Plant)

UC-12K / CA526 ABS 3TM, 3YTM ac / dcep 2.4 - 6.4 mm Ulsan

UC-12K / CA526 AWS A.5.17-97 F7A(P)6-EM12K ac / dcep 2.4 - 6.4 mm Ulsan

UC308L / PFS-1 AWS A5.9-93 ER308L dcep 2.4 - 4.8 mm Ulsan

UC316L / PFS-1 AWS A5.9-93 ER316L dcep 2.4 - 4.8 mm Ulsan

31/Oct/2005 Approved Welding Consumables II - 13 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

KOREA

Chosun Welding Co., Ltd. (Onsan Plant)

UC-36 / CA502 ABS 3TM, 2YTM ac / dcep 2.4 - 6.4 mm Ulsan

UC-36 / CA502 AWS A.5.17-97 F7A(P)0-EH14 ac / dcep 2.4 - 6.4 mm Ulsan

UC-36 / CA502H ABS 3YTM ac / dcep 2.4 - 6.4 mm Ulsan

UC-36 / CA502H AWS A.5.17-97 F7A2-EH14 ac / dcep 2.4 - 6.4 mm Ulsan

UC-36 / CA508 ABS 3TM, 4YTM ac / dcep 2.4 - 6.4 mm Ulsan

UC-36 / CA508 AWS A.5.17-97 F7A(P)8-EH14 ac / dcep 2.4 - 6.4 mm Ulsan

UC-43 / CA514 ABS 3TM, 3YTM ac / dcep 2.4 - 6.4 mm Ulsan

UC-43 / CA514 AWS A.5.17-97 F7A(P)4-EL8 ac / dcep 2.4 - 6.4 mm Ulsan

Hanswel Co., Ltd.

SW-H14 / FA-77HS ABS 2TM, 2YTM ac / dcep 2.0 - 6.0 mm Ulsan

For two-run technique, maximum plate thickness of 20 mm.

Hyundai Welding Co., Ltd.

H-14 (X2) / S-777 MXH ABS 3YM ac / dcep 1.2 - 3.2 mm Ulsan

H-14 / S-705EF / IRN / ABS 2, 2Y** ac / dcep 2.0 - 6.4 mm Ulsan

S-22
**For one-side welding technique

H-14 / S-707 TP ABS 3M, 3YM ac / dcep 2.0 - 6.4 mm Ulsan

H14 / S-737 ABS 3M, 3YM ac / dcep 2.0 - 6.4 mm Ulsan

H-14 / S-777 MXH ABS 2M, 2YM ac / dcep 1.6 - 6.4 mm Ulsan

H-14 / S-777 MXH ABS 2T, 2YT, 3M, 3YM ac / dcep 1.2 - 6.4 mm Ulsan

H-14 / S-787TB ABS 3T, 3YT, 5Y400M ac / dcep 1.2 - 6.4 mm** Ulsan
**Suitable for Tandem Arc Welding.

H-14 / Superflux 55ULT** ABS 5Y400M H5 ac / dcep 1.2 - 6.4 mm Ulsan

**Suitable for Tandem Arc Welding.

H-14 / Superflux 787 ABS 3M, 4YM ac / dcep 1.6 - 6.4 mm Ulsan

H-14L / Superflux 787 ABS 3M, 4YM ac / dcep 1.6 - 6.4 mm Ulsan

L12 / S-727 ABS 2TM, 2YTM** ac / dcep 1.6 - 6.4 mm Ulsan

**Two-run technique: Max. 5.0 mm

L8 / S-707 ABS 3TM, 3YTM ac / dcep 1.6 - 6.4 mm Ulsan

L8 / S-707 / IRN / S-22 ABS 2, 2Y** ac / dcep 2.4 - 6.4 mm Ulsan

**For one-side welding technique.

L8 / S-727 ABS 2TM, 2YTM ac / dcep 2.4 - 6.4 mm Ulsan

31/Oct/2005 Approved Welding Consumables II - 14 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

KOREA

Hyundai Welding Co., Ltd.

L-8 / Superflux 70H AWS A5.17-97 F7A0-EL8, ac / dcep 1.6 - 6.4 mm Ulsan
F7P0-EL8
M-12K / S-717 ABS 3TM, 3YTM ac / dcep 2.4 - 6.4 mm Ulsan

YS-316L / Superflux 300S AWS A5.9-93 ER316L (Wire)** ac / dcep 1.6 - 5.0 mm Ulsan
**Mfr's guaranteed min. properties and chem. (W.M.) CVN 34 J at -60°C, TS 490 N/mm2, EL.30%, C 0.04 max, Mn 0.5~2.5, P 0.040 max, S 0.030 max, Si
1.0 max, Cr 17.0~20.0, Ni 11.0~16.0, Mo 2.0~3.0

Kiswel Ltd.

KD-40 / EF-200 ABS 3TM, 3YTM ac / dcep 2.0 - 6.0 mm Busan

KD-40 / K-CM / EF-200 / ABS 2, 2Y ac / dcep 2.0 - 6.0 mm Busan

DB-1-1
Submerged arc welding wire with ceramic backing material intended for automatic one-run welding technique

KD-42 / EF-200K ABS 3TM, 3YTM ac / dcep 2.0 - 6.0 mm Busan

KD-50 / EF-100 ABS 3TM, 3YTM ac / dcep 2.0 - 6.0 mm Busan

KD-50 / EF-100H ABS 3TM, 3YTM ac / dcep 2.0 - 6.0 mm Busan

NETHERLANDS

Hilarius Haarlem Holland B.V.

Hilco HW530 / H100 ABS 2YT ac 2.4 - 4.8 mm Rotterdam

Lincoln Electric Europe

LNS T55 / 8500 ABS 4Y400M dcep 2.8 mm Rotterdam

PERU

Exsa S.A.

PS-1 / POP-100 ABS 1T, 3M ac / dcep 4 - 5 mm Callao

PS-1 / POP-185 ABS 1T, 2M ac / dcep 4 - 5 mm Callao

PS-2 / POP-100 ABS 1YT, 3YM ac / dcep 4 - 5 mm Callao

PS-2 / POP-185 ABS 1YT, 2YM ac / dcep 4 - 5 mm Callao

PHILIPPINES

Welding Industries of the Philippines

WIPWeld EMS 1 / OP181; ABS 3TM dcep 2.5 - 5.0 mm Manila

Oerlikon EMS 1 / OP181
(EL12-F7A2)

31/Oct/2005 Approved Welding Consumables II - 15 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

POLAND

Esab Sp. z o.o.

OK Autrod 12.10 / OK Flux ABS 3TM, 3YTM ac / dcep 2.0 - 6.0 mm Gdynia
10.76
OK Autrod 12.20 / OK Flux ABS 3M, 3YM ac / dcep 2.0 - 6.0 mm Gdynia
10.71
OK Autrod 12.20 / OK Flux ABS 2TM, 2YTM ac / dc 2.0 - 6.0 mm Gdynia
10.81
OK Autrod 12.22 / OK Flux ABS 4Y400M ac / dcep 2.0 - 6.0 mm Gdynia
10.71
OK Autrod 12.24 / OK Flux ABS 3TM, 3YTM ac / dc 2.0 - 6.0 mm Gdynia
10.71
OK Tubrod 14.00S / OK ABS 3M, 3YM ac / dcep 2.4 - 4.0 mm Gdynia
Flux 10.71
OK Tubrod 15.00S / OK ABS 3M, 3YM dcep 2.4 - 4.0 mm Gdynia
Flux 10.71
OK Tubrod 15.25S / OK ABS 4Y400M dcep 3.0 - 4.0 mm Gdynia
Flux 10.62

SLOVENIA

Elektrode Jesenice d.o.o.

EPP2 / AB100 ABS 2TM ac / dcep 2.0 - 5.0 mm Rijeka

EPP2 / AR 18.1 ABS 2YTM ac / dcep 2.0 - 5.0 mm Rijeka

For two-run technique, maximum plate thickness of 20 mm.

EPP2 / AR D1 ABS 2YTM ac / dcep 2.0 - 5.0 mm Rijeka

EPP2 / AR18.5 ABS 2TM ac / dcep 2.0 - 5.0 mm Rijeka

EPP2 / FBTT ABS 3M** ac / dcep 2.0 - 5.0 mm Rijeka

**Mfr's guaranteed minimum CVN 30 J at -40 °C.

EPP2Mo / FBTT ABS 3YM ac / dcep 2.0 - 5.0 mm Rijeka

EPP3 / AB100 ABS 2YTM ac / dcep 2.0 - 5.0 mm Rijeka

For two-run technique, maximum plate thickness of 20 mm.

EPP3 / FB 12.2 ABS 2YT, 3YM ac / dcep 2.0 - 5.0 mm Rijeka

EPP3 / FBTT ABS 3YM ac / dcep 2.0 - 5.0 mm Rijeka

SOUTH AFRICA

Afrox Ltd.

Afrox Sub 70-2 / Duracor B ABS 2YM dc 4 mm Durban

SPAIN

Union Iberica de Soldadura, S.A.

HB20 / AS60 ABS 3YTM ac / dc 2.0 - 5.0 mm Gijon

31/Oct/2005 Approved Welding Consumables II - 16 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

SPAIN

Union Iberica de Soldadura, S.A.

HB20 / H700 ABS 2YTM dcep 2.0 - 5.0 mm Gijon

SWEDEN

Esab AB

OK Autrod 12.10 / OK Flux ABS 2YT ac 2.0 - 6.0 mm Gothenburg

10.30
OK Autrod 12.10 / OK Flux ABS 3YM ac / dcep 4.0 - 6.0 mm Gothenburg
10.70
OK Autrod 12.10 / OK Flux ABS 3M ac / dcep 2.0 - 4.0 mm Gothenburg
10.71
OK Autrod 12.20 / OK Flux ABS 3YM, 2YT ac / dcep 2.0 - 6.0 mm Gothenburg
10.71
OK Autrod 12.22 / OK Flux ABS 3M, 3YM ac / dcep 2.5 - 6.0 mm Gothenburg
10.62
OK Autrod 12.22 / OK Flux ABS 4Y400M ac / dcep 2.0 - 6.0 mm Gothenburg
10.71
OK Autrod 12.22 / OK Flux ABS 3Y400M ac / dcep 1.2 - 5.0 mm Gothenburg
10.78
OK Autrod 12.22 / OK Flux ABS 3Y400M ac / dcep 1.2 - 5.0 mm Gothenburg
10.88
OK Autrod 12.24 / OK Flux ABS 3M, 3YM ac / dcep 1.6 - 6.0 mm Gothenburg
10.62
OK Autrod 12.24 / OK Flux ABS 3TM, 3YTM ac / dc 2.0 - 6.0 mm Gothenburg
10.71
OK Autrod 12.32 / OK Flux ABS 4YQ420M ac / dcep 1.2 - 5.0 mm Gothenburg
10.62
OK Autrod 12.34 / OK Flux ABS 4YQ500M ac / dcep 2.0 - 5.0 mm Gothenburg
10.62
OK Autrod 13.27 / OK Flux ABS 5YQ460M ac / dcep 3.0 - 4.0 mm Gothenburg
10.62
OK Autrod 13.43 / OK Flux ABS 4YQ690M ac / dcep 1.2 - 5.0 mm Gothenburg
10.62
OK Autrod 13.44 / OK Flux ABS 4YQ620M ac / dcep 1.2 - 5.0 mm Gothenburg
10.62

TAIWAN R.O.C.

Tien Tai Electrode Co., Ltd.

TSW-12KM / TF-385 ABS 3T, 3YT dc 2.4 - 4.8 mm Kaohsiung

TSW-12KM / TF-565 ABS 3M, 3YM dc 2.4 - 4.8 mm Kaohsiung

TSW-14H / TF-565 ABS 3M, 3YM dc 2.4 - 4.8 mm Kaohsiung

TURKEY

AS Kaynak Teknigi San. ve Tic. A.S.

AS S1 / Lincoln L-860 Flux ABS 3M dcep 2.4 - 4.0 mm Istanbul

31/Oct/2005 Approved Welding Consumables II - 17 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

TURKEY

AS Kaynak Teknigi San. ve Tic. A.S.

AS S2 / Lincoln L-780 Flux ABS 3M, 3YM dcep 2.4 - 4.0 mm Istanbul

AS S2 / Lincoln L-860 Flux ABS 3M, 3YM dcep 2.4 - 4.0 mm Istanbul

Borkim Boru Profil Filmasin Ve Kimyasal Urunler San. Tic. Sti

S2 / Subtech AB 18 ABS 3YM dcep 2.0 - 4.0 mm Istanbul

Gedik Kaynak Sanayi Ve Ticaret A.S.

Geka S1 / Eliflux BAR ABS 2T dcep 2.0 - 5.0 mm Istanbul

Geka S2 / Eliflux BFB ABS 3YM dcep 2.0 - 5.0 mm Istanbul

UNITED KINGDOM

Oerlikon Welding Ltd.

S2 / OP121TT ABS 4YM dcep 4.0 mm Liverpool

S2 / OP192 ABS 3YM dcep 4.0 mm Liverpool

SD3 / OP 121TT ABS 4YM dcep 4.0 mm Liverpool

SD3 / OP192 ABS 4YM dcep 4.0 mm Liverpool

SD3 1Ni 1/2 Mo / OP121TT ABS 4YQ550M dcep 4.0 mm Liverpool

SD3 1Ni 1/4 Mo / OP121TT ABS 4YQ460M dcep 4.0 mm Liverpool

SD3-2-1/2 Ni, 1/2 Cr, 1/2 ABS 4YQ690M dcep 4.0 mm Liverpool
Mo / OP121TT
Tibor 22 / OP 192 (Single ABS 3YM dcep 4.0 mm Liverpool
wire)
Tibor 22 / OP 192 (Single ABS 3YT dcep 4.0 mm Liverpool
wire)
Tibor 22 / OP 192 ABS 3YM dcep 3.2 - 4.0 mm Liverpool
(Tandem)
Tibor 22 / OP 192 ABS 3YT dcep 3.2 - 4.0 mm Liverpool
(Tandem)

UNITED STATES

Esab Welding & Cutting Products

Spoolarc 36 / Esab OK Flux AWS A5.17-97 F7A2-EH14 1/16 - 3/16 in. Toledo
50
Spoolarc 36 / Esab OK Flux AWS A5.17-97 F7A2-EH14 1/16 - 3/16 in. Toledo
80
Spoolarc 80 / OK Flux ABS 2YM dcep 1/16 - 3/16 in. Cleveland
10.81
Spoolarc 81 / Esab OK Flux AWS A5.17-97 F7A2-EM12K-H8 1/16 - 3/16 in. Toledo
231

31/Oct/2005 Approved Welding Consumables II - 18 ABS

Submerged Arc Welding
Trade Name Spec Grade Current Polarity Sizes Port Office

UNITED STATES

Esab Welding & Cutting Products

Spoolarc 81 / Esab OK Flux AWS A5.17-97 F7A2-EM12K-H8 1/16 - 3/16 in. Toledo
350
Spoolarc 81 / Esab OK Flux AWS A5.17-97 F7A2-EM12K-H8 1/16 - 3/16 in. Toledo
429
Spoolarc ENi4 / Esab OK AWS A5.23-97 F9A4-ENi4-Ni4-H8 1/16 - 3/16 in. Toledo
Flux 429

ITW Hobart Brothers - Hobart

Metalloy EM12KS / A92 AWS A5.17-97 F7A4-EC1 dcep / dcen / ac 3/32 - 5/32" Cleveland
Flux
Metalloy EM13KS / A92 AWS A5.17-97 F7A4-EC1 dcep / dcen / ac 3/32 - 5/32" Cleveland
Flux
Metalloy EM13KS / N90 AWS A5.17-97 F7A8-EC1 dcep / dcen / ac 3/32 - 5/32" Cleveland
Flux

Lincoln Electric Company

Blue Max S308 / 308L AWS A5.9-93 ER308 / ER308L 5/64 - 5/32" Cleveland

Blue Max S309 / 309L AWS A5.9-93 ER309 / ER309L 5/64 - 5/32" Cleveland

Blue Max S316 / 316L AWS A5.9-93 ER316 / ER316L 5/64 - 5/32" Cleveland

L-50 / 960 AWS A5.17-97 F7A2-EM13K-H8 0.035 - 3/16" Cleveland

L-60 / 761 AWS A5.17-97 F7A2-EL12 5/64 - 7/32" Cleveland

L-60 / 780 AWS A5.17-97 F7A2-EL12 1/16 - 3/16" Cleveland

L-60 / 860 AWS A5.17-97 F6A2-EL12-H8 5/64 - 7/32" Cleveland

L-61 / 761 AWS A5.17-97 F7A2-EM12K-H8 1/16 - 3/16" Cleveland

L-61 / 780 AWS A5.17-97 F7A2-EM12K 1/16 - 3/16" Cleveland

L-61 / 8500 ABS 3M dcep 5/32" Cleveland

L-61 / 860 AWS A5.17-97 F7A2-EM12K-H8 1/16 - 3/16" Cleveland

L-61 / 882 AWS A5.17-97 F7A6-EM12K-H8 1/16 - 3/16" Cleveland

L-61 / 960 AWS A5.17-97 F7A2-EM12K-H8 1/16 - 3/16" Cleveland

L-70 / 761 ABS 3M, 3YM ac / dc 5/64 - 3/16" Cleveland

L-70 / 761 ABS 3YT ac / dc 5/64 - 3/16" Cleveland

LA-85 / 8500 ABS 4YM dcep 3/32 - 3/16" Cleveland

LAC-M2 / 880 AWS A5.23-97 F11A6-ECM2-M2-H8 3/32 - 5/32" Cleveland

LAC-Ni2 / 880 AWS A5.23-97 F7P10-ECNi2-Ni2-H8 3/32 - 5/32" Cleveland

LS3 / 8500 ABS 4M, 4YM dcep 3/32 - 5/32" Cleveland

31/Oct/2005 Approved Welding Consumables II - 19 ABS