Product Data: Castrol Magnatec Professional 10W-30

PRODUCT DATA
CASTROL MAGNATEC PROFESSIONAL 10W-30

PRODUCT DESCRIPTION
Castrol Magnatec Professional 10W-30 is a part synthetic premium performance Fuel

Efficient SAE 10W-30 engine oil that contains intelligent molecules that cling to your
engine, forming an extra layer that protects during start-up and beyond.
When the engine stops, ordinary oils drain off critical engine parts, however Castrol
Magnatec’s intelligent molecules don’t - they cling to the engine like a magnet
providing an extra layer of protection ready to protect from the moment you turn
the key.
Castrol Magnatec Professional 10W-30 is micro filtered and with its signature green
colour it is your guarantee of professional quality.
Castrol Magnatec Professional provides Instant protection from the moment you
turn the key.
PRODUCT APPLICATION
Castrol Magnatec Professional 10W-30 is formulated for most types of new Australian,
Asian and American passenger, 4WD and light commercial vehicle engines – petrol
or gas, turbocharged or naturally aspirated, which are designed to run on lower
viscosity fuel efficient engine oils.
Castrol Magnatec Professional 10W-30 complies with the Australian motor industry agreed
phosphorus limits to assist in prolonged exhaust catalyst and oxygen sensor life.
Castrol Magnatec Professional 10W-30 is suitable for use in automotive petrol engines
where the manufacturer recommends an API SN/CF or earlier specification 10W-30
lubricant.
PRODUCT FEATURES & BENEFITS
Every car engine type can experience the benefits of using unique Castrol Magnatec
Professional 10W-30 including:
 Dramatically reduced engine wear at start-up and warm-up, helping to

extend the life of the engine.
 Instant protection from the moment you turn the key.
 Improved engine cleanliness through excellent detergency chemistry and the
use of ultra refined and synthetic base oils.
 Excellent oil consumption control.
 Low viscosity formulation for increased fuel efficiency.
 Maintains performance and viscosity throughout the service period.
 Compatible with other mineral and synthetic engine oils.
Page 2 of 3
PRODUCT FEATURES & BENEFITS … continued
It is important to note that the superior wear protection offered by Castrol Magnatec
Professional 10W-30 will be reduced if mixed with other non Castrol engine oils.
TYPICAL CHARACTERISTICS
SAE KV @ KV @ cP @ Viscosity Pour Point

Viscosity 100 0C 400C (cSt) -25 0C Index (0C)
Grade (cSt)
10W-30 10.4 62.8 3900 148 -36
PERFORMANCE LEVELS
Castrol Magnatec Professional 10W-30 is recommended where the following current and
superseded classifications and performance levels are cited.
 American Petroleum Institute (API) Service Classification:

Petrol: SN, SM. SL (SJ, and all superseded classifications)
Diesel: CF
 ILSAC: GF-4, GF-3, GF-2

* Meets all performance requirements of API SM but not chemical limits.
 Motor Manufacturers -
Holden : Commodore VS onwards
Ford : AU, AU2, AU3, BA, Mondeo, Festiva
Toyota : Most models – 1995 onwards
Nissan : Most models – 1995 onwards
HyundaI : Petrol models – 2001 onwards
Honda : Most models – 2002 onwards
Subaru : Most petrol models – 2002 onwards
Page 3 of 3
HEALTH, SAFETY & ENVIRONMENT
Castrol Magnatec Professional 10W-30 is considered non-hazardous according to Work

safe. However, in line with safe handling practices, it is recommended that the handling
instructions outlined in the Castrol Material Safety Data sheet be followed.
Spillage
Small: Soak up using an inert mineral adsorbent such as Castrol MOP

and dispose of in the appropriate manner.
Large: Corrective action usually dictated by individual company

safety procedures. Immediate containment and subsequent
removal is essential.
Disposal: Oily materials must not be allowed to enter groundwater,

watercourses, sewerage or drainage systems. Refer to local
Waste Disposal Authority for legal requirements.
Product Removal
Bare Metal Surfaces: Remove with Castrol solvent cleaners or water based
degreasers.
Hand Cleaning: Use any of the Castrol range of hand cleaners, e.g. Care Clean
Plus.
Other Surfaces: Contact the Castrol Technical Advice Line on 1300 557 998.
Although all reasonable care has been taken to ensure that the information contained in this publication is accurate as at the time
of printing, such information is nevertheless liable to variation in the event of changes occurring subsequent to the date of printing it:
the blend formulation, methods of storage, or due to the improper handling or application of any of the products referred to, or in
the requirements of any specification or approval relating to any of the products.
For more information contact: Castrol Lubricants (A Business Division of BP Australia Pty Limited - ABN 53 004 085 616)
Technical Advice Line: 1300 557 998
Customer Service: 1300 554 890
www.castrol.com.au
Sydney: (02) 9795 4800 Fax: (02) 9795 4815

Melbourne: (03) 9268 4200 Fax: (03) 9268 3915
Brisbane: (07) 3850 9300 Fax: (07) 3850 9399
Adelaide: (08) 8304 2200 Fax: (08) 8304 2294
Castrol_Magnatec_Professional_10W-
30 3350551 2011 10 doc

Product Data: Castrol Magnatec Professional 10W-30

Uploaded by

Copyright:

Available Formats

Product Data: Castrol Magnatec Professional 10W-30

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Product Data: Castrol Magnatec Professional 10W-30

Uploaded by

Copyright:

Available Formats

PRODUCT DATA

CASTROL MAGNATEC PROFESSIONAL 10W-30

Castrol Magnatec Professional 10W-30 is a part synthetic premium performance Fuel

PRODUCT FEATURES & BENEFITS

 Dramatically reduced engine wear at start-up and warm-up, helping to

PRODUCT FEATURES & BENEFITS … continued

SAE KV @ KV @ cP @ Viscosity Pour Point

10W-30 10.4 62.8 3900 148 -36

 American Petroleum Institute (API) Service Classification:

 ILSAC: GF-4, GF-3, GF-2

HEALTH, SAFETY & ENVIRONMENT

Castrol Magnatec Professional 10W-30 is considered non-hazardous according to Work

Small: Soak up using an inert mineral adsorbent such as Castrol MOP

Large: Corrective action usually dictated by individual company

Disposal: Oily materials must not be allowed to enter groundwater,

Sydney: (02) 9795 4800 Fax: (02) 9795 4815

You might also like