Scribd
Upload
67 views1 page

Abstract:: Replacement of Fine Aggregate by Foundry Sand

Foundry sand is a waste byproduct from metal casting that contains silica and can be used as a partial replacement for river sand in concrete production. This study examines replacing river sand with 20%, 30%, and 40% foundry sand by weight in M-25 grade concrete to evaluate the effect on mechanical properties like compressive and tensile strength. Concrete cubes will be cured for 7, 14, and 28 days and tested to determine if foundry sand concrete can meet structural requirements while reducing environmental impacts from foundry sand disposal. The results will help optimize the proportion of foundry sand that can be utilized in concrete.

Uploaded by

mdaashu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
67 views1 page

Abstract:: Replacement of Fine Aggregate by Foundry Sand

Foundry sand is a waste byproduct from metal casting that contains silica and can be used as a partial replacement for river sand in concrete production. This study examines replacing river sand with 20%, 30%, and 40% foundry sand by weight in M-25 grade concrete to evaluate the effect on mechanical properties like compressive and tensile strength. Concrete cubes will be cured for 7, 14, and 28 days and tested to determine if foundry sand concrete can meet structural requirements while reducing environmental impacts from foundry sand disposal. The results will help optimize the proportion of foundry sand that can be utilized in concrete.

Uploaded by

mdaashu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

REPLACEMENT OF FINE AGGREGATE BY FOUNDRY SAND

ABSTRACT:
Concrete as a building material plays an important role in the construction sector. The consumption of
natural resources as an ingredient of concrete, costs high as well as it is on verge of extent. These
problems force us to recover the natural resources or to find an alternative option to overcome this
problem. Due to the lack of river sand we are replacing it with foundry sand . Foundry sand is clean,
uniformly sized, high quality silica sand, used in foundry casting processes. Foundry sand contains about
84.9% of silica(SiO2) and up to 10% of clay and 5% of carbonaceous material. Currently, the production of
waste foundry sand as a by-product of metal casting industries causes various environmental problems due
to the improper disposal. Usage of this waste as a building material would help in reduction of stress on
environment. This paper demonstrates the use of waste foundry sand as a partial replacement of fine
aggregate in concrete. This project is to know the behaviour and mechanical properties of concrete after
addition of industrial waste in different proportion by tests like compressive strength and split tensile. The
aim of this project is to reduce the cost of the concrete and environmental hazards caused by the foundry
sand. An experimental investigation is carried out on a concrete containing waste foundry sand in the range
of 20%,30% and 40% by weight for M-25 grade concrete(PCC). Material will be produced, tested and
compared with conventional concrete in terms of strength. These tests will be carried out on standard cube
of 150*150*150* mm after curing for 7, 14 and 28 days to determine the mechanical properties of concrete.
Through experimental result we will conclude that the compressive strength increases with increase in
partial replacement of waste foundry sand.

You might also like