Scribd
Upload
812 views2 pages

Daily Plant Inspection Checklist

This daily plant inspection checklist is used by Collective Civil Pty Ltd to ensure plant safety and maintenance. It requires plant operators to check over 20 items before each use, including the cabin, visibility, electrical and hydraulic systems, leaks, brakes, signs, wheels and hitches. Any faults are documented and reported. If issues pose a safety hazard or require immediate repair, the machine must be parked until cleared by a supervisor. The checklist forms part of the company's plant maintenance procedure and records.

Uploaded by

Muthu Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
812 views2 pages

Daily Plant Inspection Checklist

This daily plant inspection checklist is used by Collective Civil Pty Ltd to ensure plant safety and maintenance. It requires plant operators to check over 20 items before each use, including the cabin, visibility, electrical and hydraulic systems, leaks, brakes, signs, wheels and hitches. Any faults are documented and reported. If issues pose a safety hazard or require immediate repair, the machine must be parked until cleared by a supervisor. The checklist forms part of the company's plant maintenance procedure and records.

Uploaded by

Muthu Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

DAILY PLANT INSPECTION CHECKLIST

DATE: COMPANY NAME: Collective Civil Pty Ltd


WORKING FOR: JOB SITE:
PLANT DESCRIPTION: REGISTRATION or PERMIT NO:
MAKE & MODEL: EXPIRY DATE:
SERIAL NO: HOUR METRE/ KM READING:

PLANT OPERATOR DAILY SAFETY CHECKLIST:


Operators are required to check the following items before commencing work. These
records form the basis of a plant maintenance procedure and will be subject to random
inspection. Keep record with machine at all times.
Fault Item not
OK, no obvious defect identified, use N/A applicable to
report below machine or
operator

BEFORE COMMENCING OPERATIONS CHECK M T W T F S S


Cabin- Access, egress seating, seatbelts, loose objects, controls, rops or fops
Visibility- windscreen, windows, wipes, washers, mirrors
Electrical system- lights, amber beacon, horn, rev travel alarm
Hydraulics- rams, hoses, leaks, wear
Leaks- engine, transmission, final drives, cooling systems
Brakes- emergency and service
Neutral start
Compulsory signs, reflective tape, reflectors
Misc- air con, fire extinguisher
Damage to- panels / guards- cracks to chassis/frame/body.
Wheels, tyres, tracks- wear/tension/pressure
Hitch (safety pin) - wear
Articulated joint/linkage
Environmental spill kit
Daily checklist in machine- plant security information list
Plant security
Operators Operators Drivers Plant Induction card Track safety Supervisors
Name Initials Licence no operators no Awar. Cert no Signature
ticket no

Details of faults or defects and action taken:

Fault reported to________________ Position ____________________Date ________________


Does fault constitute a safety hazard YES/NO
Does machine require immediate repair? Y/N Does machine require immediate repair? Y/N
If yes to either PARK MACHINE UP. Contact the hirer or supervisor and plant operator- detail
inside front cover. Machine should not be used until supervisor or plant operator gives clearance
for use.

You might also like