Scribd
Upload
2K views3 pages

How To Install RG1000e Driver

To install the RG-1000e driver: 1. Download Zagid 2.3 from the provided URL and locate it on your computer without installing it. 2. Connect the RG-1000e to your computer's USB port and turn it on. 3. Open the device manager and use Zagid to select the ATIS M-300 device, delete it, and type RG1000e to identify the correct driver to install.

Uploaded by

SmartPTT
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views3 pages

How To Install RG1000e Driver

To install the RG-1000e driver: 1. Download Zagid 2.3 from the provided URL and locate it on your computer without installing it. 2. Connect the RG-1000e to your computer's USB port and turn it on. 3. Open the device manager and use Zagid to select the ATIS M-300 device, delete it, and type RG1000e to identify the correct driver to install.

Uploaded by

SmartPTT
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

How to install RG‐1000e driver  

 Download from http://zadig.akeo.ie/    Zagid 2.3 softool. 
 
 Locate Zagid 2.3 to a desirable folder. Installation is not 
required. 
 
 Connect RG‐1000e to PC USB port and turn‐on RG‐1000e. 
 
 Open PC Device Manager. You may see Other devices ‐ ATIS 
M‐300. 
 
 

 run Zagid and select target device ATIS M‐300  
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 check–on  Edit box 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 Delete ATIS M‐300 and type RG1000e 
 

 
 
 
 
 
 
 
 
 
 
 
 Select target driver libusb‐win32 (v1.2.6.0) 

 
 

 Click Install Driver 

 If everything is ok you should see this pop‐up message  

 Open PC Device Manager. You may see RG‐1000e device. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

You might also like