Reference Data http://hvsp.hoerbiger.com/vsp/help/referencedata.

html

Last Updated:02/10/2014

Standards Table
Material is listed in order of preference in the following table

Standard valve plate material and lift for different applications

APPLICATONS Suction Material Suction Lift Discharge Material Discharge
Lift
AIR (001) PC (Carbon Filled PEEK) Low PC (Carbon Filled PEEK) Low
Air/Nitrogen

CNG (002) MTX (Med Temp Nylon X) Low PEEK Low

CNG/GNC NYX (Low Temp Nylon X) Low PKX (PEEK X) Low
PKX (PEEK X) Low PCX (Carbon Filled X) Low
PC (Carbon Filled PEEK) Low PC (Carbon Filled PEEK) Low
PCX+ (Carbon Filled X+) Low MTX (Med Temp Nylon X) Low
PCX+ (Carbon Filled X+) Low
Standard Application (003) NYX (Low Temp Nylon X) Standard MTX (Med Temp Nylon X) Standard
Gas Gathering MTX (Med Temp Nylon X) Standard PEEK Standard
Injection PKX (PEEK X) Standard PKX (PEEK X) Standard
Drilling PCX (Carbon Filled X) Standard PCX (Carbon Filled X) Standard
Fuel Booster PCX+ (Carbon Filled X+) Standard PCX+ (Carbon Filled X+) Standard
LNG
Refrigeration
Vapor Recovery Unit

Storage (005) NYX (Low Temp Nylon X) Low MTX (Med Temp Nylon X) Low
Storage/Withdrawal MTX (Med Temp Nylon X) Low PEEK Low
PC (Carbon Filled PEEK) Low PKX (PEEK X) Low
PCX (Carbon Filled X) Low PC (Carbon Filled PEEK) Low
PCX+ (Carbon Filled X+) Low PCX (Carbon Filled X) Low
PCX+ (Carbon Filled X+) Low
Pipeline (006) NYX (Low Temp Nylon X) Standard NYX (Low Temp Nylon X) Standard
Pipeline MTX (Med Temp Nylon X) Standard MTX (Med Temp Nylon X) Standard
PCX (Carbon Filled X) Standard PCX (Carbon Filled X) Standard
PCX+ (Carbon Filled X+) Standard PCX+ (Carbon Filled X+)

Recommended valve plate material and lift for the various applications
1.1. Air application (001) valves are available with PC or metallic plates only

1.2. The Air Application (001) has the following characteristics

1.2.1. PC in SV
1.2.2. PC in DV

1.3. The CNG Application (002) has the following characteristics

1.3.1. MTX in SV (LOW LIFT valves only)
1.3.2. PKX in DV (LOW LIFT valves only)

1.4. The Standard Application (003) has the following characteristics

1.4.1. All material in SV
1.4.2. All material except NYX in DV

1.5. The Storage Application (005) has the following characteristics

1 of 3 19-May-16 15:44
Reference Data http://hvsp.hoerbiger.com/vsp/help/referencedata.html

1.5.1. NYX/MTX/PC/PCX in SV (LOW LIFT valves only)

1.5.2. MTX/PKX/PC/PCX in DV (LOW LIFT valves only)

1.6. The Pipeline Application (006) has the following characteristics

1.6.1. NYX/PCX in SV (STANDARD LIFT ONLY)
1.6.2. NYX/MTX/PCX in DV (STANDARD LIFT ONLY)

Post Selection Criteria and Limits

1. Temperature
Temperature Limits in Table1 are applicable to all Valve types including APV Valve type

Table1
No Material Material Short Temperature Temperature Max
Name Min (°F) (°F)
1 Low Temp Nylon X NYX -40 248
2 Medium Temp Nylon X MTX -40 320
3 PEEK X PKX -40 482
4 Carbon Filled X PCX -40 482
5 PEEK Carbon PC -40 482
6 AISI 4140 (Alloy Steel) 40 -40 570
7 AISI 410 (Mart. 400 Series) 50 -40 570
8 SS 17 - 4PH 60 -40 570

2. Q-Value
Q-Value selection criterion is applicable only on Head end and not on Crank end.

2.1 APV Valve type

Lower limit = 0.65 %
Upper limit = 18 %

2.2 All other Valve types

Lower limit = 0.75 %
Upper limit = 18 %

3. Springing Limits

3.1 Springing limits for APV Valve type

Closing Spring Type Lower Limit T2 Upper Limit

(bar) T90 (bar)
Coil Spring 0 1.5 x T90

3.2 Springing limits for all other Valve types

Closing Spring Type Lower Limit T2 Upper Limit

(bar) T90 (bar)
Coil Spring 0 1.45 x T90
Spring Plate 0 2 x T90

4. Plate Material Impact Velocity

The following limits of Plate Material Impact Velocity are applicable to all Valve types including APV Valve type

Maximum allowable impact velocity for non-metallic sealing element= 16.40 ft/s
Maximum allowable impact velocity for metallic sealing element= 13.12 ft/s

5. Closing Angle

4.1 Closing Angle limits for APV Valve type

Closing Spring Type Degree Crank Angle Degree Crank Angle

2 of 3 19-May-16 15:44
Reference Data http://hvsp.hoerbiger.com/vsp/help/referencedata.html

HE CE
Low Limit Upper Limit Low Limit Upper Limit
Coil Spring 160.0 180.0 160.0 181.5

4.2 Closing Angle limits for all other Valve types

Closing Spring Type Degree Crank Angle Degree Crank Angle

HE CE
Low Limit Upper Limit Low Limit Upper Limit
Coil Spring 162.0 180.0 162.0 181.5
Spring Plate 162.0 184.0 162.0 184.0

Discharge Event
Discharge Event in Table2 is applicable for all Valve types including APV Valve type

Table2
Standard Lift (ms) Low Lift (ms)
DE Warning 4.5 0
DE Error 2.7 2.7

3 of 3 19-May-16 15:44