Python

Pneumatically Operated Pumps for Chemical Injection

 Python Pneumatically Operated Pumps
®

Python pumps are ideal for applications that require a pump to operate in an potentially explosive atmosphere
and can run off regulated natural gas or compressed air. These pumps have the lowest out of pocket cost, are
easy to operate and use half the air consumption of other pumps in the market. Plus, the Python’s extreme duty
plungers, seals and timing valve are designed for years of operation before replacement.

Ease of serviceability Robust and simple design

• Easy access to the pump plunger and packings • Adjustable fluid packing lasts up to 25 times longer than
• Cartridge style seal in the timing valve for quick and easy repair non-adjustable seals
• Plunger packings can be replaced in 5 minutes or less • Pythons are offered with Chromex and Ceramic coated plungers
• 316 SST fluid section/wetted parts
Highest technology timing valve on the market • HNBR, FKM, FKM ETP, TFEP and FFKM plunger packings and
• Low air/gas consumption for increased efficiency check valve seals
• Pump cycle rate remains constant regardless of system • Proprietary poppet style check valve eliminates valve from sticking
back pressure
Standards

Ordering Information
GRACO Python™ Pneumatically Operated Pumps
Seals / Plunger Size 1/8" 3/16" 1/4" 3/8" 1/2" 5/8" 3/4"
1.25” Air Piston (CE Approved)
FKM A25000 A25001 A25002 A25003 A25004 A25005 A25006
FKM-ETP A25021 A25022 A25023 A25024 A25025 A25026 A25027
HNBR A25042 A25043 A25044 A25045 A25046 A25047 A25048
FFKM A25063 A25064 A25065 A25066 A25067 A25068 A25069
1.75” Air Piston (CE Approved)
FKM A25007 A25008 A25009 A25010 A25011 A25012 A25013
FKM-ETP A25028 A25029 A25030 A25031 A25032 A25033 A25034
HNBR A25049 A25050 A25051 A25052 A25053 A25054 A25055
FFKM A25070 A25071 A25072 A25073 A25074 A25075 A25076
2” Air Piston (CE Approved)
FKM A25014 A25015 A25016 A25017 A25018 A25019 A25020
FKM-ETP A25035 A25036 A25037 A25038 A25039 A25040 A25041
HNBR A25056 A25057 A25058 A25059 A25060 A25061 A25062
FFKM A25077 A25078 A25079 A25080 A25081 A25082 A25083

1.25” Air Piston (ATEX Approved)

FKM A25100 A25101 A25102 A25103 A25104 A25105 A25106
FKM-ETP A25121 A25122 A25123 A25124 A25125 A25126 A25127
HNBR A25142 A25143 A25144 A25145 A25146 A25147 A25148
FFKM A25163 A25164 A25165 A25166 A25167 A25168 A25169
1.75” Air Piston (ATEX Approved)
FKM A25107 A25108 A25109 A25110 A25111 A25112 A25113
FKM-ETP A25128 A25129 A25130 A25131 A25132 A25133 A25134
HNBR A25149 A25150 A25151 A25152 A25153 A25154 A25155
FFKM A25170 A25171 A25172 A25173 A25174 A25175 A25176
2” Air Piston (ATEX Approved)
ATEX Approved
FKM A25114 A25115 A25116 A25117 A25118 A25119 A25120 Python Pump
FKM-ETP A25135 A25136 A25137 A25138 A25139 A25140 A25141
HNBR A25156 A25157 A25158 A25159 A25160 A25161 A25162
FFKM A25177 A25178 A25179 A25180 A25181 A25182 A25183

2
Technical Data
Python Chemical Injection Pump Dimensions:
US Metric
Maximum air inlet pressure see charts on back page
Maximum fluid working pressure see charts on back page
Environmental temperature
-40°– 176°F -40°– 80°C
range
Noise (dBa)
Maximum sound pressure <70 dBa with included muffler installed
Inlet/Outlet Sizes
Fluid inlet size 1/4 in. npt(f) (1/4 npt(m) adapter included)
Fluid outlet size (1/4”, 3/8”, 1/2”,
1/4 in. npt(f)
5/8”, & 3/4” plungers only)
Fluid outlet size
HiP HF4
(1/8” & 3/16” plungers only)
Prime/bleed size (1/4”, 3/8”,
10-32 UNF
1/2”, 5/8”, & 3/4” plungers only)
Prime/bleed size
1/16 in. npt(f)
(1/8” & 3/16” plungers only)
Pneumatic inlet size 1/8 in. npt(f) (1/4 npt(f) adapter included)
Pneumatic outlet size
1/8 in. npt(f)
(exhaust recovery)
Materials of Construction
Pump/Check Valve Seal Material See Configuration Number Matrix below for seal material. A B C D E
See Configuration Number Matrix below for plunger material. 13.26 in. 5.3 in. 2.34 in. 2.3 in. 9.125 in.
Wetted Parts
All other materials are 316 stainless steel unless otherwise noted. (33.7 cm) (13.5 cm) (5.9 cm) (5.8 cm) (23.2 cm)
Weight
All models 8-11 lbs. 3.6-4.9 kg

Configuration Number Matrix

Check the identification plate (ID) for the 12-digit Configuration Number of your pump. Use the following matrix to define the
components of your pump. NOTE: Not all combinations are possible.

Sample Configuration Number: PC I -12 5 -19 S -X A-A

PCI 125 19 S X A A
Pneumatic Chemical Air Plunger Size Pressure Plunger Material Seal Material Qualifier
Injection Motor Size Range

Air Motor Size Plunger Size Pressure Plunger Seal

(diameter) Range Material Material Qualifier
125 1-1/4" 13 1/8" S Standard Pressure X Chromex Coated A FKM A ATEX
(1/4”, 3/8”, 1/2”, 5/8”, 3/4” plungers) 17-4 PH Stainless
175 1-3/4" 19 3/16" H High Pressure (1/8” & 3/16” plungers) C Ceramic Coated B FKMETP
17-4 PH Stainless
200 2" 25 1/4" C HNBR
38 3/8" D FFKM
50 1/2"
63 5/8”
75 3/4”
Key Points
• Standard pressure pumps feature 1/4 in. NPT(F) inlet and outlet connections.
• High pressure pumps feature 1/4 in. NPT(F) inlet and HiP HF4 outlet connections.
• B32240 can be used to convert HF4 outlet connection to 1/4 in. NPT(F) for applications 10,000 psi and under. 3
 3.0 (22.7)

GPD (LP
(11.4)

GPD (LPD)
2.5 50
(9.5) (18.9)

2.0 40
(7.6) (15.1)
1.5
(5.7)
A B C D KEY 30
(11.4) A B C
1.0 Inlet Pressure
(3.8) 20

0.5
A = 50 psi(7.6)(3.5 bar)
B = 100 psi10 (6.9 bar)

Performance Curves
(1.9)
(3.8)
0
C = 150 psi0 (10.3 bar)
0 2000 4000 6000 8000 10000 12000
(137.9) (275.8) (413.7) (551.6) (689.5) (827.4) D = 200 psi (13.80 bar)
100 200 300 400 500 60
(6.9) (13.8) (20.7) (27.6) (34.5) (41.
Outlet Pressure - PSI (Bar)
1 1/4” Air Motors (PCI-125) Outlet Pressure - PSI (B
1 1/4” Air
1 1/4” Air Motors (PCI-125)
Motors (PCI-125) 1 3/4” Air Motors (PC

1/8” Plunger (PCI-125-13)

4.5
1/8” Plunger (PCI-125-13) 4.5
(17.1)
1 3/4” Air Motors
45
3/8”(PCI-175)
Plunger (PCI-125-38)
1/2” Plunger (PCI-125-50) 80
1/2” Plunger (PCI-125-50)
(17.1)
4.0
(17.0)
80 (30.3) 1/4” Plu
(15.1) (30.3) 18
4.0 40 (68.1)
(15.1) (15.1) 70
3.5 70 (26.5)
16
PCI-125-50) 3.5 (13.3) 35 (26.5) (60.6)
(13.3) (13.3) 1/4” Plunger (PCI-175-25) 60
GPD (LPD) 1/2” Plunger (PCI-175-50)
3.0 (22.7)
18 60 14
GPD (LPD)

3.0 (11.4) 30 (22.7) (53.0)

GPD (LPD)
(68.1) 80
(11.4) (11.4)

GPD (LPD)GPD (LPD)

50 (30.3)

GPD (LPD)
2.5

GPD (LPD)
(9.5) 16 50 (18.9) 12
2.5 25
(60.6) (45.4)
(9.5) (9.5) (18.9) 70
2.0 40 (26.5)
(7.6) 14 (15.1) 10
2.0 20
(53.0) 40 (37.9)
(7.6) (7.6) (15.1) 60
1.5 A B C D 30 (22.7)
(5.7) 12 8

GPD (LPD)
1.5 A B C D 15
(45.4) A B 30 C D (11.4) A B C D (30.3)
(5.7) (5.7) (11.4) A B C D
1.0 50
(3.8) 10 20 (18.9) 6
1.0 10
(37.9) (7.6) (22.7)
(3.8) (3.8) 20
0.5 (7.6) 40
(1.9) 8 10 4
0.5 5 (15.1) (15.2)
(30.3)
(1.9) (3.8)
B (1.9) C D 10
0
6
0 A B(3.8) C D 30 2
0 0 (22.7) 0 (11.4) (7.6)
2000 4000 6000 8000 10000 12000 A B C D
0 2000 4000 6000 8000 10000 (137.9)
12000 (275.8) 0(413.7) 200 (551.6)
400 0 (827.4)
(689.5) 800
600 1000 1200 1400 1600 1800
4 0 100 200 300 40020 500 600 700 800 900
0
(137.9) (275.8) (413.7) (551.6) (689.5) (827.4) (13.8) (27.6) (41.4) (55.2) 0 (69.0)100 (82.7)200 (96.5)300(110.3)
400(124.1) 800 (6.9)
900 (13.8) (20.7) (27.6)
(15.2) 500 600 700 (7.6) (34.5) (41.4) (48.3) (55.2) (62.1)
Outlet Pressure - PSI (Bar) (6.9) (13.8) (20.7) (27.6) (34.5) (41.4) (48.3) (55.2) (62.1) 0 10
Outlet Pressure - PSI (Bar) 2
(7.6) Outlet Pressure - PSI (Bar) Outlet Pressure
10 - PSI (Bar)
(6
(3.8)
0
Outlet Pressure - PSI (Bar)
0 300 400 500 600 700 800 900 0
.8) (20.7) (27.6) (34.5) (41.4) (48.3) (55.2) (62.1) 0 1000 2000 3000 4000 5000 6000 7000 8000
(68.9) (137.9) (206.8) (275.8) (344.7) (413.7) (482.6) (551.6) 0 500 1000

1 Outlet
3/4”Pressure
Air Motors
3/8” (PCI-175)
- PSIPlunger
(Bar) (PCI-125-38)
1 3/4” Air Motors3/8”
(PCI-175)
45
Plunger (PCI-125-38)
Outlet Pressure - PSI (Bar)
(34.5)
2” Air Outlet
Motors (PCI-
(69.0)

(17.0) Pressure -
45 3/8” Plu
1 3/4” Air Motors (PCI-175)
(17.0)
40
40
(15.1)
45
(17.0)
(15.1)
35 40
(13.3) 1/4” Plunger (PCI-175-25) (15.1)
35 1/4” Plunger (PCI-175-25) 3/8” Plunger (PCI-175-38) 1/2” Plunger (PCI-175-50) 1/4” Plu
18
(13.3) 18
30 45 1/2” Plunger (PCI-175-50) 35
18
30 (68.1)
(68.1)
(11.4) 2” Air Motors (PCI-200) (17.0) 80
80
(13.3)
GPD (LPD)

(30.3) (68.1)
(11.4) 16 (30.3)
GPD (LPD)

16 25
(60.6) 40 30
16
(9.5) 70
25 (60.6) (15.1) 70 (11.4)
(60.6)

GPD (LPD)GPD (LPD)

(26.5)
(9.5) 14 (26.5)
14 20
(53.0) 35 25
14
20 (53.0) (7.6) (13.3) 60 (9.5)
(53.0)
GPD (LPD)

60 (22.7)
GPD (LPD)

(7.6) 12

GPD (LPD)
12 30 1/4”
15 C Plunger D(PCI-200-25) A (22.7) B 20
(45.4) 1/2” Plunger (PCI-200-50) 12
GPD (LPD)

ger (PCI-175-50)15(45.4) A B C D (5.7)

(11.4) 50 (7.6)
(45.4)
GPD (LPD)

(5.7) 18 10 50 70
(68.1) 10 (18.9)
10 25
(37.9) (18.9) (26.5) 15
10
10 (37.9) (9.5)(3.8) (5.7)
(37.9)
(3.8) 16 8 40
8 (60.6) 5 40 (15.1) 10
20
(30.3) (15.1) 60 8
D 5 (30.3) (7.6)(1.9) (22.7) (3.8)
(30.3)
(1.9) A 14
B (53.0) 6 C D 30
6 A B C (22.7)0D
15 A B 30 C D (11.4) A B 50 C D 65
0 (22.7) (5.7) (11.4) A B C D (1.9)
(22.7)
4 0 200 400 600 12
800 1000 1200 1400 1600 1800 (18.9)
(45.4) 20
04 1600 (13.8)
1800 (27.6) (41.4) (55.2)
10 (69.0) (82.7) (96.5) (110.3) (124.1) 40

GPD (LPD)
200 400 600 800 1000 1200 1400
(15.2) 20
GPD (LPD)

(7.6)
(15.2) (13.8) (27.6) (41.4) (55.2) (69.0) (82.7) (96.5) (110.3) (124.1) (3.8) (7.6) (15.2)
2 10 40 0 5
2 (7.6) Outlet Pressure
(37.9)
5 - PSI (Bar) 10
10 (15.1) 2 (3
(7.6) Outlet Pressure - PSI (Bar) (1.9)
8 (3.8)
(3.8) (7.6)
0 30
0 (30.3)
0 0 0
700 800 900 (11.4)
48.3) (55.2) (62.1) 0 1000 2000 3000 4000 5000 6000 7000 80000
0 1000 2000 3000 4000 5000 6000 7000 8000 6 0 A B C 2500D
A B C D (68.9) (137.9) (206.8) (22.7)(275.8) (344.7) 500 (413.7)1000(482.6) 1500
(551.6) 2000
0
3000 3500 0 500 1000 A 1500B C 2000 0 D
(68.9) (137.9) (206.8) (275.8) (344.7) (413.7) (482.6) (551.6) (34.5) (68.9) (103.4) (137.9) (172.4) 500(206.8) 1000
(241.3) 1500 2000
(34.5) 20 (69.0) (103.4) (137.9)
(34.5) (69.0) (103.4) (137.9)
Outlet Pressure - PSI (Bar) Outlet Pressure
4 - PSI (Bar) (7.6)
(15.2) Outlet Pressure - PSI (Bar) Outlet Pressure - PSI (Bar) Outlet Pressure - PSI (Bar)
2 10
(7.6) (3.8)

0 0
15003/8” Plu
3/8” Plunger (PCI-175-38) 0 2000 4000 6000 8000 10000
1000 3/8” 0 500 1000
500 Plunger (PCI-175-38) 2000
1500 (137.9) (275.8) (413.7) (551.6) (689.5)
2” Air Motors (PCI-200)
(34.5) (69.0)
45 (103.4) (137.9) 2” Air45
Motors (PCI-200)
(17.0) Outlet Pressure - PSI (Bar)
(34.5) (69.0) (103.4)
45
(17.0)
(17.0)
Outlet Pressure - PSI (Bar) Outlet Pressure - PSI (Ba
2” Air Motors (PCI-200)
40
(15.1)
40
(15.1)
40
(15.1)
35 35
35 (13.3) (13.3)
(13.3)
1/4” Plunger (PCI-200-25) 30 1/4” Plunger (PCI-200-25) 3/8” Plunger (PCI-200-38) 1/2” Plunger (PCI-200-50) 1/2” Plunger (PCI-200-50) 30
30 (11.4) (11.4)
18
GPD (LPD)

18 45

GPD (LPD)
(11.4) 70 70
GPD (LPD)

(68.1) (68.1) (17.0) (26.5)

25 (26.5) 25
25 (9.5) (9.5)
16
(9.5) 16 40
(60.6) (60.6) (15.1) 60
20 60 20
20 (7.6) (22.7) (22.7) (7.6)
14
(7.6) 14 35
(53.0) (53.0) (13.3)
15 A B C D 50 15
15 A B C D
(5.7) 50 (5.7)
12
(5.7) 12 30 (18.9) (18.9)
(45.4) (45.4) (11.4)
GPD (LPD)
GPD (LPD)

10
GPD (LPD)

10
GPD (LPD)

GPD (LPD)

10 (3.8) (3.8)
10
(3.8) 10 25 40 40
(37.9) (37.9) (9.5) (15.1) (15.1)
5 5
5 (1.9) (1.9)
8
(1.9) 8 20
(30.3) (30.3) (7.6) 30 30
0 (11.4) 0
0 (11.4)
6 A B C D 0 6 500
A
1000 1500
15 B
2000
CA
2500
D
3000B 3500C AD B C D A B C D 0 500
D (22.7) 0 (22.7) (5.7)
500 1000 1500 2000 2500 3000 (34.5) 3500 (68.9) (103.4) (137.9) (172.4) (206.8) 20 (241.3) 20 (34.5
(34.5) (68.9) (103.4) (137.9) (172.4) 4(206.8) (241.3) (7.6) (7.6)
4 10
(15.2)
Outlet Pressure - PSI (Bar)
(15.2) Outlet Pressure
(3.8) - PSI (Bar)
2 10 10
2 5 (3.8)
(7.6) (7.6) (1.9) (3.8)

0 0 0 0
0
0 2000 4000 6000 8000 0 10000 2000 40000 5006000 1000 8000 2000
1500 0
10000
2500 3000
500 3500 1000 4000 45001500 2000 0 2500 500 1000 1500 2000 2500
1500 2000 (137.9) (275.8) (413.7) (551.6) (689.5)(137.9) (275.8) (413.7)(68.9)
(34.5) (551.6) (137.9)
(103.4) (689.5) (206.8)
(172.4) (241.3) (69.0)
(275.8) (310.3)
(103.4) (137.9) (34.5) (103.4) (137.9) (172.4) (34.5) (69.0) (103.4) (137.9) (172.4)
Outlet Pressure - PSI (Bar) Outlet Pressure - PSI (Bar) Outlet Pressure - PSI (Bar) Outlet Pressure - PSI (Bar) Outlet Pressure - PSI (Bar)
ure - PSI (Bar)

3/8” Plunger (PCI-200-38) 3/8” Plunger (PCI-200-38)

45 45
(17.0) (17.0)

40 40
(15.1)
Note:
(15.1)
35
Please see instruction manual for different
35
plunger sizes.
(13.3) (13.3)

30 30
(11.4) (11.4)
GPD (LPD)
GPD (LPD)

25 25
(9.5) (9.5)

All20written and visual data contained in this document are(7.6)

based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
20
(7.6)
15 A B C D 15 A B C D
(5.7) (5.7)

Call today for product information or to request a demonstration:

10 10
(3.8) (3.8)

5 5

866.552.1868, email oilandgas@graco.com or visit us at www.graco.com.

(1.9) (1.9)

0 0
0 500 1000 1500 2000 2500 3000 3500 0
4000 500
4500 1000 1500 2000 2500 3000 3500 4000 4500
(34.5) (68.9) (103.4) (137.9) (172.4) (206.8) (241.3) (275.8) (34.5)
(310.3) (68.9) (103.4) (137.9) (172.4) (206.8) (241.3) (275.8) (310.3)

Outlet Pressure - PSI (Bar) Outlet Pressure - PSI (Bar)

©2018 Graco Inc. 3G0044 Rev. E 01/18 Printed in the U.S.A.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.