The document provides calculations for pressure and elongation values for post-tensioning works. It calculates the locking load pressure and design load pressure in kg/sq cm for different hydraulic jacks based on the jack's effective area and the load in tons. It also calculates the elongation of tendons based on parameters like the modified jack pressure, length and area of tendon, and Young's modulus, to check if it is within the allowed limits of +7% of the nominal value. Signatures of representatives from the contractor and client are provided at the end.
The document provides calculations for pressure and elongation values for post-tensioning works. It calculates the locking load pressure and design load pressure in kg/sq cm for different hydraulic jacks based on the jack's effective area and the load in tons. It also calculates the elongation of tendons based on parameters like the modified jack pressure, length and area of tendon, and Young's modulus, to check if it is within the allowed limits of +7% of the nominal value. Signatures of representatives from the contractor and client are provided at the end.
The document provides calculations for pressure and elongation values for post-tensioning works. It calculates the locking load pressure and design load pressure in kg/sq cm for different hydraulic jacks based on the jack's effective area and the load in tons. It also calculates the elongation of tendons based on parameters like the modified jack pressure, length and area of tendon, and Young's modulus, to check if it is within the allowed limits of +7% of the nominal value. Signatures of representatives from the contractor and client are provided at the end.
The document provides calculations for pressure and elongation values for post-tensioning works. It calculates the locking load pressure and design load pressure in kg/sq cm for different hydraulic jacks based on the jack's effective area and the load in tons. It also calculates the elongation of tendons based on parameters like the modified jack pressure, length and area of tendon, and Young's modulus, to check if it is within the allowed limits of +7% of the nominal value. Signatures of representatives from the contractor and client are provided at the end.
Effective Jack Ram Area: 50.27 sq.-cm (25 Ton jack)
Locking Load: 13.8 x 20% = 2.76 ton per strand
=2.76 x 1000 = 13800 Kg
= 2760/ 50.27 = 54.9 Kg/sq. cm say 55.
As per jack calibration report
For jack number: T9HMNJ 26, Modified Pressure is 40 kg/sq.cm
T9HMNJ 27, Modified Pressure is 40 kg/sq.cm
FOR USING T9HMNJ 09
Hydraulic jack Number: T9HMNNJ-09 Effective Jack Ram Area: 33.7 sq.-cm (20 Ton jack)
Locking Load: 13.8 x 20% = 2.76 ton per strand
=2.76 x 1000 = 13800 Kg
= 2760/ 33.7 = 81.89 Kg/sq. cm say 82.
As per jack calibration report
For jack number: T9HMNJ 09, Modified Pressure is 68 kg/sq.cm
- 16 - Method Statement for Post tension works .
For LOAD: 100% OF 13.8 TONS
FOR USING T9HMNJ 26/27
Hydraulic jack Number: T9HMNNJ-26&27
Effective Jack Ram Area: 50.27 sq.-cm (25 Ton jack)
Design Load: 13.8 ton per strand
=13.8 x 1000 = 13800 Kg
= 13800/ 50.27 = 274.5 Kg/sq. cm say 275.
As per jack calibration report
For jack number: T9HMNJ 26, Modified Pressure is 265 kg/sq.cm
T9HMNJ 27, Modified Pressure is 267 kg/sq.cm
FOR USING T9HMNJ 09
Hydraulic jack Number: T9HMNNJ-09 Effective Jack Ram Area: 33.7 sq.-cm (20 Ton jack)
Design Load: 13.8 ton per strand
=13.8 x 1000 = 13800 Kg
= 13800/ 33.7 = 409.49 Kg/sq. cm say 410
As per jack calibration report
For jack number: T9HMNJ 09, Modified Pressure is 410 kg/sq.cm
Signatures;
For Tech9 For Sanken
- 17 - Method Statement for Post tension works .
ELONGATION CALCULATION SHEET
(Sample)
FOR USING T9HMNJ 26/27 - JACK SHEET-I
Date: 17-09-2016
1. Hydraulic jack Number: T9HMNNJ-26&27
2. Modified Pressure: P= 11.2 Tons = 11.2 x 9.81 = 109.872 say 110 kN 3. Lets consider, Length of Tendon (end to end) = 14.16 m Grip length = 0.950 m 4. Nominal area of strand A = 98.7 Sq. mm 5. Young’s modulus E = 195 kN/sq.mm 6. Elongation e = PL/AE = [(110 x 1000 x (14.160-0.95)) / [(98.7 x 195)] + 6 mm = 81.499 mm say 81.5 mm. 7. Elongation limits (+ 7%) = 75.79 mm to 87.20
