=—_——— CACC concrete appitives & CHEMICALS PVT. LTD. 150 9001 - 2008 Certified Company 6CAC CAC-Hyperfluid Plus (H2) Superplasticising Admixture Based on Ploy-Corboxylic Ether CAC-Hyperfluid Plus (H2) is 2 ‘superplasticising admixture to produce lower grades concrete where the cohesive, ‘workable and pumpable concrete is required. AREA OF APPLICATION: Ready Mix Concrete for lower grades Site Mixed Concrete Reguiar Strength Concrete upto M50 Suitable for crushed sand concrete Pumped concrete Primary uses to obtain- ‘+ Good dispersion resulting in High workability & superb stump retention. Improves cohesiveness & pumpabilty. Increases early & ultimate strengths Increases Flexural strength & E-modulus Can be placed and compacted in congested reinforcements without vibration & improves surface finish. ‘+ Increases durability & impermeability ‘© Ideal for use in low fines, crushed sand concrete mixes. STANDARDS: ASTM C494 ~Type 6 15 9103 : 1999 METHOD OF APPLICATION: ‘Add 80-90% water to the concrete based on Mix Design by weight. The correct quantity of ‘CACHyperfluid Plus (H2) should be measured with recommended dispenser and should be added to the concrete with remaining mbxing water. Allow to mix it for recommended mixing time, The addition of CAC-Hyperfluid Plus (H2) to dry mixes or cement is not recommended. Regd. Office & Works: Concrete Additives & Chemicals Pvt.Ltd | Mob : +91 9840501900 Plot No.J84, Poonthotta Nagar, Kakkalur - Vilage, Tiruvallur-602003, Fax: +91 22 2768 6787 Tamil Nadu, INDIA, {tis strongly recommended that conerete should be properly cured particularly in hot and dryctimates. Thorough mixing is essential and after addition of CAC-Hyperfluid Plus (H2), minimum ‘mixing cycle of 60 seconds for forced action mixers fs recommended. DOSAGE: ‘Asa starting point, a dosage range of 0.5kg to 1.2kg per 100kg of cementitious materials is recommended. Optimum — dosage of CAC- Hyperfluid Plus (H2) should be determined in trial mixes. Please consult CAC Pvt. Ltd. Technical staff for further information. COMPATIBILITY: CAC-Hyperfluid Plus (H2) is compatible with all types of cements and CAC-Retardplast series of products. If more than one admixture is to be usec in concrete, they must be dispensed se,rarately with prior approval received from CAC Pvt. Ltd. Technical Services. CAC-Hyperfluid Plus (H2) is sultable for mixes containing: © Micro-silica + Pulverised Fly Ash * Ground Granulated Blast Furnace Slag WORKABILITY: CAC-Hyperfluid Plus (H2) ensures that concrete remains workable in excess of 3 hours at 200C, Workabilty loss is dependent on temperature, type of cement, nature of aggregates, the method of transport and initial workability E-mail: [email protected] www.cac-admixtures.com@l -AC CONCRETE ADDITIVES & CHEMICALS PVT. LTD. “The Admixture Company CAC-Hyper fluid Plus (H2) ‘TECHNICAL PROPERTIES: ‘Appearance Yellowish Brown liquid Base material Poly-Carboxylie Ether Specific Gravity@30"C | 1.09 + 0.020 Chloride content NC oH Minimum 6 Mechanism of action: Conventional Superplasticiser, based on Sulphonated Naphthalene or Melamine Formaldehyde condensates, at the time of mixing getting absorbed onto the surface of ‘cement particles. This absorption takes place at very early stage in the hydration process, The sulphonic groups of the polymer chains increases the negative charges on the surface of the cement particle and the dispersion of the ‘cement occurs by Electrostatic Repuision. CAC-Hyperfluid Plus (#2) is cifferentiated from conventional superplasticisers in that itis based on unique carboxylic ether polymer with long lateral chains. This greatly improves the ‘cement dispersion. At the start of the mixing process the same electrostatic dispersion takes place as described above; but the presence of the lateral chains, linked to the polymer backbone, generate a Steric Hindrance which stabllzes the cement particles capacty to separate & disperse. This mechanism provides fluid concrete with greatly reduced water demand with longer retention, Works: Concrete Additives & Chemicals Pvt Lte Plot No 184, Poonthotta Nagar, Kakkar - Village, Titwvelur-602003, ‘Temi! Nadu, INDIA Mob : +91 9840501900 Fax: +91 22 2768 6787 180 9001 - 2008 Certified Company ‘The shelf life of the product is. year when stored as recommended, PACKAGING: CAC-Hyperfluid Plus (H2) is available in 230 kg drum and in tanker (10 MT) on demand. ‘STORAGE: ‘CAC-Hyperfluid Plus (H2) must be stored at above 50C temperature. Store under cover, protect it from direct sunlight. Failure to comply with recommended storage condition may result in premature clcterioration of the product or packaging EFFECTS OF OVER-DOSAGE: A severe over-dosage of CAC-Hyperfluid Plus (H2) will result in the following: ‘© Retardation of Setting Time + Increase in workability / segregation +” Slight increase in air entrainment SAFETY PRECAUTIONS: CAC-Hyperfluid Plus (H2) is a non-toxic and Non | flammable. When in contact with the skin, it should be washed with cold water. Disclaimer: “The product information & aplication detas given by the company & is agents has been provide in goed Fath & meant to serve only asa general guideline during usage. Users are advised to camry out tests and take rns to ensure (on Sutabity of products meeting their requrement rior to ful scale usage of our products, Since the correct Identification of te problems, quay of the other materials. Used and on-site workmanship are factors beyond out contr), there a= no expressed or imped guarantee [warranty as to the results obtained. The Company does not | ‘assume Sy lability or any consequential damage for unsatisfactory results E-mail [email protected] worn.cac-admixtures com