Scribd
Upload
1K views6 pages

Sample Report Design Mix

This document provides test results for materials used in a concrete mix design. It includes: 1) Results of tests on cement including consistency, setting time, and compressive strength at 3, 7, and 28 days. 2) Sieve analysis and test results for fine aggregates including fineness modulus, specific gravity, bulk density, and water absorption. 3) Sieve analysis and test results for coarse aggregates including bulk density, water absorption, and specific gravity. The document confirms that materials meet requirements for a concrete mix design and provides batch proportions and test results to achieve the target strength grade.

Uploaded by

Shuvro Chakravorty
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
1K views6 pages

Sample Report Design Mix

This document provides test results for materials used in a concrete mix design. It includes: 1) Results of tests on cement including consistency, setting time, and compressive strength at 3, 7, and 28 days. 2) Sieve analysis and test results for fine aggregates including fineness modulus, specific gravity, bulk density, and water absorption. 3) Sieve analysis and test results for coarse aggregates including bulk density, water absorption, and specific gravity. The document confirms that materials meet requirements for a concrete mix design and provides batch proportions and test results to achieve the target strength grade.

Uploaded by

Shuvro Chakravorty
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

DESIGN MIX / TRIAL MIX REPORT (ACI-211.

1)

DETAILS OF PROJECT / TRIAL: TRAIL NO : DATE OF TRIAL :


LOCATION : BATCHING TIME :
AIR :
TEMPERATURE

MIX PROPORTION (KG): BATCH SIZE =


DESIGN
NAME OF SOURCE SSD WATER DRY MOISTURE ADJUSTMEN QTY / REMARKS
MATERIAL / (KG) ABSORPTION T BATCH
TYPE PER % QTY PER % QTY PER WT.
1M3 1M3 1M3
CEMENT
MINERAL
ADM1
MINERAL
ADM2
CA : 20MM
FA : SAND
ADMIXTURE 1
ADMIXTURE 2
WATER
Free W/C Ratio = Admixture Dosage =

OBSERVATIONS:
CONCRETE COHESIVE / SEGREGATING / BLEEDING
TEMPERATURE :
ACTUAL PLASTIC KG/M3 AIR CONTENT 2% YIELD :
DENSITY : (%):
SETTING TIME OF Initial (hr:min) - Final (hr:min) -
CONCRETE :

INITIAL SLUMP -
WORKABILIY SLUMP AFTER 30 MINS -
SLUMP AFTER 60 MINS -
DATE DATE OF WEIGHT DENSITY STRENGT AVERAGE
REF OF AGE SIZE LOAD
H STRENGTH
NO.
CAST TEST
(DAYS) (M3) (KG.)
(KN)
(KG/M3) (N/MM2 (N/MM2)
COMPRESSIVE STRENGTH
)

7 0.15x0.1
5x
7 0.15=
7 0.003375

28 0.15x0.1
5x
28 0.15=
28 0.003375

COMMENTS:

NB:
1. This test report is based on the samples received by our laboratory.
2. The test result relates only to the items tested. Sign:
3. The report shall not be reproduced except in full without the QC Engineer
approval.

SUB-CONTRACTOR CONTRACTOR CLIENT CONSULTANT


Test on materials for cement concrete Mix-Design for M__ grade.

I:-Water

Name of Test Observed value Requirement

Determination of pH value Not less than 6

A-1:- Cement: -

Brand:
Sl. Requirement
Physical Properties Observed value
No.

1 Type and grade

2 Standard consistency

3 Initial setting time

4 Final setting time

5 Specific gravity

Compressive strength

Average
Compressive strength of Load Compressive Compressive Requirement
cement at in KN strength in N/mm² strength in
N/mm²

3-days

7-days

28-days
II:-Fine aggregates (sand):-
Grading test:-
Weight of sample taken= gms. Source:
Cumulative % by Weight of material
IS sieve Weight of
% by Weight of % of material Passing
Size in mm. material
material Retained
retained in
retained
gms
9.5
4.75
2.36
1.18
0.6
0.3
0.15
PAN

 Fineness of Modulus =
 Specific gravity =
 Bulk density =
 Water Absorption=
III:-Coarse Aggregates:-

Sieve analysis:
Weight of sample taken= gms. Source:

Sieve Size Weight of Cumulative % by Weight of material


% by Weight of % of material Passing
in mm. material
material retained Retained
retained in
gms
37.5
20
12.5
9.5
4.75
PAN

 Bulk density=
 Water absorption =
 Specific gravity

You might also like