Scribd
Upload
55 views1 page

2011 Catalog PIC Parte28

Standard dimensions are available for piezoelectric ceramic components including disks, rods, cylinders, plates, and blocks. Components are available in different thicknesses and diameters depending on the intended resonant frequency application. Standard dimensions use readily available semi-finished materials, allowing for short delivery times. Custom geometries beyond standard sizes are also possible upon request.

Uploaded by

Paolo Rossi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views1 page

2011 Catalog PIC Parte28

Standard dimensions are available for piezoelectric ceramic components including disks, rods, cylinders, plates, and blocks. Components are available in different thicknesses and diameters depending on the intended resonant frequency application. Standard dimensions use readily available semi-finished materials, allowing for short delivery times. Custom geometries beyond standard sizes are also possible upon request.

Uploaded by

Paolo Rossi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Standard Dimensions

 Electrodes: Fired silver


Components with standard dimensions can values cannot be combined. Geometries
be supplied at very short notice on the basis which exceed the standard dimensions are
(thick film) or PVD of semi-finished materials in stock. Extreme available on request.
(thin film, different
materials: e. g. CuNi or
Au)

 Disk / rod / cylinder  Disk / rod


 Points: Resonant
frequency > 1 MHz
with defined resonant frequency
TH OD in mm
Circles: Resonant in mm 3 5 10 16 20 25 35 40 45 50 Frequency OD in mm
frequency < 1 MHz
Electrodes: Fired silver
0.20
• • • • • in MHz 3 5 10 16 20 25 35 40 45 50

(thick film) or PVD 0.25


• • • • • 10.00
• • • • •
(thin film, different 0.30
• • • • • • 5.00
• • • • • •
materials: e. g. CuNi or
Au)
0.40
• • • • • • • 4.00
• • • • • ••
0.50
• • • • • • • • • 3.00
• • • • • •••
 Electrodes: Fired silver
0.75
• • • • • • • • • • 2.00
• • • • ••••
(thick film) or CuNi or Au
1.00
• • • • • • • • • • 1.00
• • • •••••
(thin film) 2.00
• • • • • • • • • • 0.75 o o o o o o o o
3.00
• • • • • • • • • • o o o o o o o
4.00
• • • • • • • • • • 0.50
o o o o o o
5.00
• • • • • • • • • • 0.40

10.0
• • • • • • • • • • 0.25 o o o o
20.00
• • • • • • • • • • 0.20 o o o

 Plate / block
TH L x W in mm2
in mm 4x4 5x5 10 x 10 15 x 15 20 x 20 25 x 20 25 x 25 50 x 30 50 x 50 75 x 25
0.20
• • • • •
0.25
• • • • •
0.30
• • • • • • •
0.40
• • • • • • •
0.50
• • • • • • • • •
0.75
• • • • • • • • • •
1.00
• • • • • • • • • •
2.00
• • • • • • • • • •
3.00
• • • • • • • • • •
4.00
• • • • • • • • • •
5.00
• • • • • • • • • •
10.00
• • • • • • • • • •
20.00
• • • • • • • •

28

W W W. P I C E R A M I C . C O M

You might also like