Scribd
Upload
266 views5 pages

BLADE V7 LITE Upgrade Guide (Through An SD Card)

1) The document provides instructions for upgrading the BLADE V7 LITE smartphone through an SD card. It describes downloading the upgrade package, backing up data, inserting the SD card with the update file, and initiating the normal or forced upgrade process. 2) There are two upgrade methods - a normal upgrade for phones that can be started properly, and a forced upgrade for phones that cannot be started or enter standby state. 3) The normal upgrade process involves verifying the update file on the SD card, selecting storage card updates in the phone settings, and allowing the automated upgrade and reboot process. Forced upgrades use recovery mode and manual selection of the update file.

Uploaded by

Israel Esquivel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
266 views5 pages

BLADE V7 LITE Upgrade Guide (Through An SD Card)

1) The document provides instructions for upgrading the BLADE V7 LITE smartphone through an SD card. It describes downloading the upgrade package, backing up data, inserting the SD card with the update file, and initiating the normal or forced upgrade process. 2) There are two upgrade methods - a normal upgrade for phones that can be started properly, and a forced upgrade for phones that cannot be started or enter standby state. 3) The normal upgrade process involves verifying the update file on the SD card, selecting storage card updates in the phone settings, and allowing the automated upgrade and reboot process. Forced upgrades use recovery mode and manual selection of the update file.

Uploaded by

Israel Esquivel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

秘密 Confidential▲

BLADE V7 LITE Upgrade Guide

(Through an SD Card)

1. Cautions
The software version and pictures in this document are just for
reference only. Please use ZTE handset support website provided version
to download software.

1) Download the upgrade package.


 Open http://www.ztedevice.com.cn/support and download the upgrade
package (update.zip) that matches your phone model. If the
downloaded package is not update.zip, unzip the package to obtain
update.zip.
 Ensure that your micro SD card is at least 2GB.
Note：Please refer to our current version download size.

2) Remove the SIM card before the upgrade. Back up the data and APPs in
your phone by using the built-in Backup function. To enable the built-in
Backup function of your phone (an SD card must be inserted), select
Backup & Restore from the main menu。see Figure 1-1:

Figure 1-1
3) Perform data backup.
Note: You should not remove the SD card during the backup process. To
avoid data lost, it is not recommended to cancel the backup process.
4) Verify that the update.zip file in the root directory of the SD card
matches the model of the phone. Do not modify the file name and
extension name of the files in the upgrade package.
5) Verify that your phone has enough (at least 40%) power. Charge the phone
if required. To avoid data lost or upgrade failure, it is not recommended to
upgrade your phone through an SD card when the phone is being charged.
6) You should not perform any other operation on the phone during the
upgrade process.
7) A normal upgrade should be completed in 11-13 minutes. If the phone does
<以上所有信息均为中兴通讯股份有限公司所有，不得外传> 第1页
All Rights reserved, No Spreading abroad without Permission of ZTE
秘密 Confidential▲

not reboot or show any response in 13 minutes, you should perform the
upgrade process again. If the phone cannot be started, perform a forced
upgrade. If the forced upgrade does not work, you should contact an

after-sale service agent for support.

2. Upgrade Description
There are two upgrade methods: normal upgrade and forced upgrade.
If the phone cannot be started properly, for example, the phone cannot be
started, or the phone does not enter standby state, perform a forced upgrade.
If the phone can be started properly and the Settings menu can be selected,
perform a normal upgrade.

3. Upgrade Steps
A. Normal upgrade (the primary upgrade method)
1) Download the upgrade package that matches the phone model from
ZTE official website (http://www.ztedevice.com.cn/support/), extract
update.zip from the package, and copy update.zip to the root directory
of the SD card (the file name must be update.zip).
2) Select File Manager from the main menu, and verify that the
update.zip file in the root directory of the SD card is proper, see Figure
3-1:

Figure 3-1
3) Tap and select Settings > About phone > Software
updates >Storage card updates, see Figure 3-2:

<以上所有信息均为中兴通讯股份有限公司所有，不得外传> 第2页
All Rights reserved, No Spreading abroad without Permission of ZTE
秘密 Confidential▲

Figure 3-2

4) touch OK. If there is no SD card inserted in the phone or no upgrade


package saved in the root directory of the SD card, a message is
displayed on the screen See Figure 3-3:

Figure 3-3
5) If the upgrade package saved in the root directory of the SD card,
Touch OK. the phone automatically powers off and reboots. the SD
card upgrade screen is displayed, see Figure See Figure 3-4:

<以上所有信息均为中兴通讯股份有限公司所有，不得外传> 第3页
All Rights reserved, No Spreading abroad without Permission of ZTE
秘密 Confidential▲

Figure 3-4
6) After the phone is upgraded, it is rebooted again. After the phone starts
properly, it is recommended to manually restore the phone to its original
factory default settings. The phone is upgraded properly and can be
used.

B. Forced upgrade (for the phones that cannot be started or the phones
that cannot enter standby state)
1) For a powered-off phone, Press and hold the volume up key and
power key until the phone enters Android recovery. In this mode, the
volume key can be used to select a menu, the power key can be used to
confirm it.
2) Press the Volume down key to select Apply update from SD card,
and press the power key to confirm it. The root directory of the SD card is
opened.
3) Press the Volume down key to select the update.zip file, and press the
power key to confirm it. The phone starts the upgrade process.
4) The phone completes the upgrade process in about 11 minutes. the
screen will be displayed :Install from sdcard complete, select reboot
system now and press the power key to confirm it. It is rebooted again
After the phone starts properly, it is recommended to manually restore the
phone to its original factory default settings. The phone is upgraded
properly and can be used.

4. (Optional) Restoring the Data


If you have backed up data before upgrading your phone, restore the data.

1) select Backup &Restore from the main menu。see Figure 4-1:

<以上所有信息均为中兴通讯股份有限公司所有，不得外传> 第4页
All Rights reserved, No Spreading abroad without Permission of ZTE
秘密 Confidential▲

Figure 4-1

2) Do not remove the SD card during the restoration process. To avoid


data lost, it is not recommended to cancel the restoration process.

<以上所有信息均为中兴通讯股份有限公司所有，不得外传> 第5页
All Rights reserved, No Spreading abroad without Permission of ZTE

You might also like