2

Activity 2.3.
9 Residential Plumbing
Introduction
Prior to indoor plumbing, people obtained water from outside sources such as a well
or a nearby stream. Waste disposal was handled by using outdoor facilities or
physically carrying wastewater in containers outdoors for disposal. Luckily, today we
have indoor plumbing which provides us with easy access to clean water and
handles the disposal of wastewater. As users of the system, we typically do not think
about the plumbing system that provides us with these luxuries.
Plumbing systems are designed to transport supply water and wastewater within a
building and include water supply pipes and plumbing fixtures as well as drain pipes
and venting for wastewater disposal. Plumbing can also include storm water
drainage components and gas piping.
In this activity you will plan the water supply and wastewater disposal system for
your Affordable Housing Project and create a plumbing plan to document your
design.
Equipment
● Print of your Affordable Housing Project Floor Plan(s)
● Colored pencils
● Residential Plumbing Code Requirements
Procedure
1. If you have not already done so, sketch the preliminary location of the fixtures on
your Affordable House Floor Plan(s). Include all fixtures and appliances that must
have a water supply and/or wastewater removed.
2. Locate the water heater for the home and sketch its location on your floor plan.
3. On your floor plan, sketch a preliminary plumbing system that complies with the
residential plumbing code requirements to include hot water lines, cold water
lines, and drain lines using the appropriate line color and style.
4. Identify plumbing walls. Plumbing walls are thicker interior walls that will
accommodate the necessary piping for the water supply and drain-waste-vent
system.
5. Using the supply water pressure that you found in Activity 2.3.8 Residential Water
Supply, estimate the actual water pressure supplied to the water closet that is
furthest from the location of the entrance of the water supply into the building.
Assume that the interior plumbing is ¾ inch copper pipe with screwed fittings.
You will need to assume a vertical change in elevation between the meter and
the inlet pipe to the water closet and estimate the pipe length and fittings needed
to transport the water through the plumbing to the water closet.
© 2010 Project Lead The Way, Inc.

Civil Engineering and Architecture Activity 2.3.9 Residential Plumbing—Page 1
6. (Optional) Incorporate your plumbing design into your 3D model and create a
plumbing plan.
7. Revise the drawings of your affordable home to reflect your water supply line and
revise the wall thickness for walls identified as plumbing walls. Add notes to your
drawing to specify the type of fixtures and appliances to be installed in the home
(in order to earn LEED credits).
Conclusion Questions
1. What is important to consider when designing a plumbing system? It is
important to have a plumbing system because it keeps the potable water in
the house separate from the non potable water because all the water in that
is connected to the house have different purposes.
2. Was it necessary to relocate the water supply service or sanitary sewer lateral to
accommodate your plumbing design? Why or why not? Relocation was not
needed because it was in a good spot and the water supply service or
sanitary sewer was not underneath any of the house or outside areas.
3. Why is it important for architects to be aware of how plumbing systems are

designed or constructed? It is important for architects to be aware of how
plumbing systems are designed or constructed because everything needs
to be made efficient and no mistakes are made that can affect the
plumbing.
4. What energy-efficient design features do you plan to incorporate in your

plumbing design? We plan on putting energy efficient water sources and
energy efficient lights in our house.
© 2010 Project Lead The Way, Inc.

Civil Engineering and Architecture Activity 2.3.9 Residential Plumbing—Page 2

2

Uploaded by

Copyright:

Available Formats

2

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2

Uploaded by

Copyright:

Available Formats

Activity 2.3.

© 2010 Project Lead The Way, Inc.

3. Why is it important for architects to be aware of how plumbing systems are

4. What energy-efficient design features do you plan to incorporate in your

© 2010 Project Lead The Way, Inc.

You might also like