Projects
Projects
2016/2017
نبذة عن المشروع
A robot that is capable of interfering wherever humans fall short, wherever humans put their lives at risk to do the
job .The robot consists of a base with wheels, a head on which a camera is mounted, and two human-like hands
that enjoy high degrees of freedom. The user controlling the robot wears a virtual reality headset (vrh), to which
live video from the camera is wirelessly fed, and by which the user’s head rotation can be tracked. The user’s hand
(and fingers) motion are also tracked via a leap motion sensor, making the robot able to imitate the user’s hand
movement and head rotation. Forward and backward motion (along with turning right and left) can be controlled
by the user’s side.The robot is supported by ultra violet sensors to measure the distance and stop automatically
whenever there is an obstacle in its way .The robot is also provided with a DSP application to enable it it to auto
detect different objects .
نبذة عن المشروع
The Application of vehicle Tracking and minesweeping using quad copter
نبذة عن المشروع
network LAN for chemistry building , outputs voice call using ip phones , sending data (packets) and DNS servers
and flow charts for the process of VOIP and showing the lossess and delay while sending data using wireshark tool
نبذة عن المشروع
The idea behind this project is to build a wireless sensor network that is used to monitor the movements of a
patient so that to identify possible epileptic crisis. In the network there is a central node (CN) that integrates an
electrocardiogram (ECG) and four peripheral nodes (PN) with an accelerometer (ACC).The central node sends a
broadcast message that when received by a peripheral node trigger a sampling of the accelerometer sensor
followed by a classification. When the central node receives the classifications from all the other nodes , it's able to
perform a final classification that could use also the electrocardiogram sensor and finally the application outputs a
result that can be : no_movement , movement or crisis .
نبذة عن المشروع
blind stick using arduino with GPS module
Save Energy 6
نبذة عن المشروع
Save Energy is smart building application for reduce power consumption in residential and commercial units. We
allow the user to set his desired consumption plan (electricity bill), and give him full access (monitor and control) for
his home applications to achieve the target. The system consist of three main component, software(Android mobile
app), hardware(Raspberry Pi, power sensor and control circuits) and cloud server(google firebase ).
نبذة عن المشروع
The project consists of two main modules. The first one is the child module which is the hardware part. It is built by
an Arduino nano micro-controller and a GPS-GSM module which is SIM808. The second module is the parent
module which is an Android-based mobile application that tracks the position sent by the first module and shows it
to the parent on a map.
نبذة عن المشروع
we are building mobile application that will be useful for rowers to monitor their performance and improve it . The
mobile application will be useful using mobile sensors.The output is the working mobile application.
[email protected] اسماء االمل محمد عصام الدين محمد ابو دومه 34052
نبذة عن المشروع
The users are extremely interested in a structural monitoring service for their towers in order to have data and
reports which help the companies to better plan the inspections and to increase the awareness of a current status
of a tower. In addition, the companies could also monitor the tower in special environmental conditions such as
storms. The system must be able to provide the user with data that are helpful in the structural assessment of the
stable behavior of the tower and to inform the user if the nominal behavior changes. The data provided by the
system will be accessible by the companies by means of a protected web-based service. The benefits related to
SHM for Telecom Towers concern different aspects in the infrastructure management. The proposed service will
provide the user with an early warning system suitable for detecting and notifying about the structural status of the
tower during its lifetime. Failures and damages will be quickly identified by the user in order to plan an appropriate
response action. The Project is to deliver: • Structural Analysis for Self-Supporting Telecom Tower in order to
determine best position of the sensors and sensor types. • Hardware prototype: the system of sensors used in the
project and the process data undergo (Acquisition – Processing – Multiplexing – Transmission) • Software Interface:
software interface for the end user to view the acquired data and perform further analytical operations.
البريد اإللكتروني للمشرف المشرفون
[email protected] خالد فؤاد.د.ا
توفيق إسماعيل.د
البريد اإللكتروني للطالب رقم جلوس الطالب اسم الطالب
[email protected] احمد البدوى محمد السيد البدوى على جاد هللا 34005
CUGPU 10
نبذة عن المشروع
Our motivation is to design and implement the Cairo University GPU (CUGPU), the first embedded GPU in Egypt.
We propose the CUGPU architecture based on Common Lite (CL) profile of the Open Graphics Library for Embedded
System 1.1 (OpenGL ES 1.1.12). CUGPU provides high-performance support of the fixed-function 3D graphics
pipeline. Moreover, CUGPU can be integrated with the Cairo University SPARC (CUSPARC) processor into a
complete embedded system. Such a complete embedded system may be used in educational or commercial kits
and devices.
نبذة عن المشروع
Design and implementation of Cairo University Graphics Processing Unit (CUGPU) based on openGL ES 1.12 on
Altera FPGA Cyclone III using Mentor Graphics’ Catapult tool for high level synthesis. We developed Matlab,
floating point C, and fixed point C models for the standard. The latter model was mapped to RTL using Catapult
tool. Finally, the RTL code was mapped to logic level using Synopses design compiler and Altera Quartus II tools.
Our design supports all mandatory features of the standard . The control unit of the GPU was developed directly at
RTL level.
نبذة عن المشروع
Design the software of on board computer for a satellite system . The output is the software of this computer
نبذة عن المشروع
The project goal is to implement a visual SLAM(simultaneous localization and mapping) layer from scratch to
produce a static 2D map of the surroundings of a car by fusing sensory data from both a stereo-camera and a radar.
نبذة عن المشروع
Smart Assist System for Blind (SASB), this project consists of a pair of glasses that a blind person can wear, it then
navigates him with voice notes through headphones for obstacles in front of him, or what is the object he is looking
at, or the distance to a certain object, it can even read what is written on a piece of paper for him or describe the
scene in front of him and the glasses itself is controlled through voice commands. Models used in this project are
Convolutional neural networks (CNN), long short term memory networks, regional convolutional neural network
(RCNN) and you only look once model (YOLO).
Vision-Aid 15
نبذة عن المشروع
An android application that can aid visually impaired people to make their lives easier. The Application
communicates with the user through voice commands or touch typing, and it can help them in their daily life
actions like: - Making calls or sending a sms. - Road Navigation and Guidance (Obstacles Detection). - Controlling
mobile system settings (wifi, location, ...). - Making voice shortcuts that links to files on the device or voice notes. -
Checking the time and date. - Checking Battery level. - Setting Alarms and Reminders. - etc. The application's has
two major functionalities and many other minor functionalities (some described above). The first major function is
to handle the user's voice commands and process them, and this is done through a Speech Recognition System. The
second major function is to aid the visually impaired user in navigating the streets and guide them by detecting
obstacles in the road and warning the user on proximity with an object or a wall, and this is done by building a
computer vision system through training a deep learning CNN model and image processing techniques.
نبذة عن المشروع
Tool to make automatic disaster recovery by transfer traffic from the damaged site to another one automatically.
Tool should collect data from several nodes and fetch IDNS for records then do some checks and detect failures
then finally apply some processing on the output
نبذة عن المشروع
A software tool (TEMPO module) that detects missing neighbors and recommends the operator whether adding
them or not based on its algorithm and also checks the neighbor relation table of cells to remove unnecessary
relations in order to increase handover success rate and detect overshooting cells in LTE network.
نبذة عن المشروع
smart water meter based on IOT technology work on sub -1G frequency band
نبذة عن المشروع
smart electric meter based on IOT technology work on sub -1G frequency band
نبذة عن المشروع
A protocol to make multiple smart meters send the data over RF channel to the aggregator and the latest send it to
a PC in the company over serial connection. It is then stored in an offline data base and a cloud server using rest api
and vice versa for calling the data from a specific smart meter.
نبذة عن المشروع
it's a tool implemented by java which can automatically calculate the needed number of sites and the proper places
to deploy the required base station to cover certain area and certain capacity based on specific parameters
determined by the operator.
نبذة عن المشروع
graduation project main aim is to develop an android application that helps the blind people to be equally
compared to the normal people's life, basically the app main purpose is to detect, recognize objects within captured
images, got those objects told to himself by applying machine learning algorithms for classification using Deep
Neural Networks
نبذة عن المشروع
LTE was first introduced to achieve higher data rates than the previous technologies and overcome the network's
problems which limit its performance. Like any other network, these problems needed to be monitored on a
regular basis to detect their presence and they are known in the network as degradation and the goal is to try and
enhance them effectively offering better network performance. Thus, optimization was needed but in a more
effective way than before and the Self Organizing Network (SON) technology was once more needed to handle the
optimization process. SON could have many features and enhance many Key Performance Indicators (KPIs) and
parameters in the network and this project introduces some of these features as will be seen. The project
introduces three of the main KPIs affecting the network including E-UTRAN Radio Access Bearer Success Rate (E-
RAB SR), Radio Resource Control Success Rate (RRC SR) and Handover SR and these KPIs are affected by some
parameters as it will be discussed throughout the document. The project’s aim is to introduce an LTE SON that
enhances these KPIs automatically by varying values of some specific parameters. Any degradation in the network’s
KPIs can be solved directly by the SON. The final product would be a software tool programmed using C# language.
نبذة عن المشروع
This project is a research based project that targets an implementation of integrated CMOS RF receiver for wireless
sensor node (WSN) applications, the receiver is implemented in 65nm technology operating at 2.4 GHz and supply
voltage is 1.2V. Our main concern is power consumption, since it is one of the most important limitations in WSN
that is required to increase the battery lifetime. Area Minimization is also essential to reduce the cost and to be
suitable for deployment in dense and inaccessible area. Our challenge is to make our design achieves the power
requirements with good performance to produce the best product that matches market needs. The outcome of
the project is a complete schematic and layout of the proposed receiver with the simulation results that confirm
the performance of each building block as well as the complete receiver chain. In Addition, writing an academic
research paper to be submitted to an international conference.
نبذة عن المشروع
This project is a research based project that targets an implementation of integrated CMOS RF receiver for wireless
sensor node (WSN) applications, the receiver is implemented in 65nm technology operating at 2.4 GHz and supply
voltage is 1.2V. Our main concern is power consumption, since it is one of the most important limitations in WSN
that is required to increase the battery lifetime. Area Minimization is also essential to reduce the cost and to be
suitable for deployment in dense and inaccessible area. Our challenge is to make our design achieves the power
requirements with good performance to produce the best product that matches market needs. The outcome of
the project is a complete schematic and layout of the proposed receiver with the simulation results that confirm
the performance of each building block as well as the complete receiver chain. In Addition, writing an academic
research paper to be submitted to an international conference.
نبذة عن المشروع
• Problem Definition: Communications and DSP applications are known to be computational intensive. LTE eNodeB
is one of the most intensive applications in this field. Due to the high computational requirements of the LTE
eNodeB, many specific platforms that are normally combinations of DSPs, general purpose processors and ASICS
are available. The problem of using these platforms is that the platform may be totally unusable for subsequent LTE
releases or for upgrading to a newer technology. This upgradability problem will be translated into cost as the
platform needs to be changed. • Problem Solution: Implementing the LTE eNodeB on a general purpose processor
will eliminate the need for a specific platform. The general purpose CPU will be reusable and expandable. Also the
support for general purpose CPU development can be obtained easier than that of specific platforms.
نبذة عن المشروع
Software application providing network operators with recommendations to improve 3G network resources and
taking considerations for LTE deployment for hardware upgrades. The software provides visualization for the
network cells using Google Maps along with cells counters and parameters. Various static and dynamic algorithms
were used for the network optimization along with Vodafone recommended algorithm all which were tested with
real data from the network checking the software ability to provide reasonable recommendations.
نبذة عن المشروع
Sky communication's target is providing coverage on board so you will be able to make phone
calls ,send and receive SMS and browse the Internet by providing a mobile network on board by using
OpenBTS software and USRP b200 and Gsm gateway as hardware. we target to make a phone call
using our network, then try to call a person on another network at any country. also this project would be
very useful to change to provide a mobile coverage in places without infrastructure with low cost.
نبذة عن المشروع
1-Problem Definition The main idea of C-RAN is the cloud processing for multiple cells. One of the major trends
towards achieving such a cloud is to make the L1 DSP computationally intensive processing on General Purpose
Processor (GPP) based architectures. For this cloud to be realized it is required to offload the most complex L1
processing portions (like FEC decoders) to a highly parallel platform (FPGA) giving more powerful options to the
cloud. 2-Problem Solution Building a pluggable FPGA-based LTE coprocessor that could be connected to many-cores
GPP platform using PCI interface.
نبذة عن المشروع
- The end user has a problem that the design and simulation time of a large System On Chip (SOC) on the Register
transfer level (RTL) is very large. Moving to the transaction level modelling (TLM) level, the design and Simulation
time is less, but it introduces a small difference in the timing and power results if compared to the accurate ones
obtained from the RTL. The role of the project is to prove that TLM gives better performance from the point of
view of simulation and design time with approximate results very near to the accurate ones. Speeding the
simulation and design time and giving approximately the same results are the added value that make the user
satisfied. - There are two approaches of designing as mentioned above (TLM and RTL). Although using the RTL
gives accurate results, but it totally fails when the system is very large. So having a new way of designing that have
almost all the advantages of RTL and gives faster simulation and design time is the optimum solution of the
problem. TLM introduces this optimum solution as it doesn’t go deep in the details of the blocks but instead deal
with the blocks in an abstract way. Designing using RTL won’t disappear as it is used to characterize the blocks in
TLM (i.e. RTL is used to obtain some parameters that TLM uses to calculate power and time). A question may rise
here, if we need to go through RTL anyway, what is the importance of TLM! The answer is that TLM’s main usage is
البريد اإللكتروني للمشرف المشرفون
[email protected] حسن مصطفى.د
مجدي المرسي.د
البريد اإللكتروني للطالب رقم جلوس الطالب اسم الطالب
[email protected] احمد محمد محمود على 34028
Neural Stimulation 35
نبذة عن المشروع
In recent years, the electrical stimulations have been used for biomedical applications, such as cardiac pacemaker,
cochlear implant, muscle exercising, vision restoration, and seizure suppression. Comparing with the traditional
treatments by using medicine or surgery, the electrical stimulation was more harmless, flexible, recoverable, and
less-destructive. Moreover, with the potential for mass production, CMOS integrated circuits have been designed
to implement the electrical stimulators. Since the safety, reliability, Sustainability and Efficiency are the primary
concerns when realized the biomedical electronic devices, the on-chip stimulator designs for biomedical
applications will continuously be an important design task in advanced CMOS technologies. Our two designs are
based on UMC 130nm CMOS Technology, the two circuits aim to suppress the Seizure of an epilepsy patient, using
current stimulation as soon as the system detects the seizure Design 1: Using the idea of Closed loop circuit to
reduce the circuit power, with changeable VDD accordingly with the Electrode impedance change, i.e. with low
electrode impedance stimulated current will increase hence we can reduce VDD to get better power efficiency.
Design 2: It is implemented multiple waveform current stimulator to reduce the static power consumption, special
technique was used to decrease dependency between multiple waveform and charge accumulation by switching
البريد اإللكتروني للمشرف المشرفون
[email protected] حسن مصطفى.د
نبذة عن المشروع
)Software Defined Radio Implementation for Wireless Communication Standards (2G, 3G, 4G, WiFi, Bluetooth
Using Partial Dynamic Reconfiguration The output is a low power system capable of hopping from a standard to
another on need.
نبذة عن المشروع
Vehicle to vehicle (V2V) and vehicle to infrastructure (V2I) wireless technology, collectively known as V2X, allowing
communication betweenvehicles and their surroundings, improves road safety, reduces traffic congestion and
enhances the overall passenger experience. V2X enables 360° awareness by sending messages which include
various information of the vehicle such as position, speed and direction. The main focus is to build a DSP based V2X
Transceiver , implementing the PHY layer, and utilizing the PHY layer to build a walk test device as an
implementation test equipment for the V2X network.
نبذة عن المشروع
The project aims to develop GPS for indoor using blue tooth low energy techniques . It is divided to two main
parts : -Building a responsive web application to show the map of the floors and the paths to destination required
by user -Implementation of the algorithms that read the blue tooth packets and calculate the current position and
shortest path to the destination Hardware tools: Beacons and Raspberry Pi Software tools: LAMP server , HTML,
PHP,CSS , Java Script , Python
نبذة عن المشروع
Most of today's radio systems are not aware of their radio spectrum environment as they are designed to operate
in a predefined frequency band using a specific spectrum access system. Investigations of spectrum utilization
indicate that spectrum is not efficiently utilized most of the time. Overall spectrum utilization can be improved
significantly by allowing secondary unlicensed users to dynamically access spectrum holes temporally unoccupied
by the primary user in the geographical region of interest Cognitive radio (CR) is a form of wireless communication
in which a transceiver can intelligently detect which communication channels are in use and which are not, and
move into vacant channels while avoiding occupied ones. This optimizes the use of available radio-frequency (RF)
spectrum while minimizing interference to other user. A cognitive radio (CR) is an intelligent radio that can be
programmed and configured dynamically The main objective is how to manage spectrum between two types of
users (Primary& Secondary) according to lots of techniques such as 1- random allocation (first come first serve), 2-
overall max throughput based on underlay model using pso algorithm( it is an optimization algorthim according to
certain function)
نبذة عن المشروع
It's a simulation for a cognitive radio system used in an industrial factory - Sensors are distributed all over the
factory and communicate among each other and between each one f them and a control room using cognitive
radio -Also there're some actuators that communicate with the control room using cognitive radio too (all sensors
and actuators are simulations )
نبذة عن المشروع
how to connect to mobiles using D2D communication even they were out of coverage
نبذة عن المشروع
- D2D (device to device) communication over LAN (local area network) Developing an android application to initiate
mainly a voice call between 2 mobile devices If they are on the same LAN. It supports Direct D2D if one of the 2
devices works at ad hock mode (hotspot) or relayed D2D if the coverage of LAN from third device ex. router. -Also,
the application supports text messaging. project output :- Android mobile application
Smart Advertising 43
نبذة عن المشروع
Our project idea is to replace advertising screens in streets by screens connected to the internet there will be a
mobile app that let the customer choose the screen he wants to put his ad on it anad upload the ad the output will
be a system that handles this operation containing server mobile app and screen connected to internet
DMAC RTL Model and its Comparison with TLM Model for Virtual Platform 45
Simulations
نبذة عن المشروع
This project is to make software model for ARM DMAC Pl080 using RTL concept and compare its performance
against TLM models in order to be used for virtual paltform simulations
نبذة عن المشروع
Frequency planning in cellular networks is a very difficult and time- consuming task in ever growing cellular
networks; automatic frequency planning is thus needed. In this project, an automatic frequency planning and
optimization software tool is implemented. The tool is able to make a complete or partial network frequency
planning. It is also able to check the frequency plan regularly to avoid being obsolete after many network changes.
Performance analysis is done through identifying main kPIs from the network and frequency retuning is done in
case of interference existence.
[email protected] معتز باهلل محمد كمال سعد الدين محمد صادق 34220
نبذة عن المشروع
The aim of this work is to design a wearable healthcare device to monitor the heart rate and body temperature
readings as well as the user’s location. The sensors data is then transmitted to doctors via SMS through a GSM
modem periodically. The doctors then have daily information on their patients' conditions allowing them to make
more appropriate decisions
نبذة عن المشروع
Traditional “standalone” small cells work well in small areas, but when densely deployed across large spaces, they
create cell border interference and degrade the user experience. C-RAN, Cloud-RAN or sometimes referred to as
Centralized-RAN, is a proposed architecture for future cellular Radio Access Networks (RAN). It enhance the
network performance and spectrum, also it has direct benefits on the network costs. In this project, we simulate
the LTE protocol Stack virtualization using Ns3. The C-RAN performance is then studied.