Embest S3CEV40 Evaluation Board
ARM - Samsung S3C44B0X EVB
------10 BaseT, USB, 2x RS232,
LCD, Boot Code, ucLinux,
uCos, ...
OverView
Embest S3CEV40 Evaluation Board for S3C44B0X is a platform that is suitable for code development of
Samsung's S3C44B0X 16/32-bit RISC microcontroller (General ARM) for hand-held device and general
applications.
S3C44B0X consists of 16-/32-bit RISC (ARM7TDMI) CPU core, 8KB cache, optional internal SRAM, LCD
controller (up to 256 color DSTN), 2-ch UART with hand-shake(IRDA1.0,16-byte FIFO), 4-ch DMA, System
manager (chip select logic, FP/ EDO/SDRAM controller), 6-ch timers with PWM, 71-bit general purpose I/O
ports, RTC, 8-ch 10-bit ADC, IIC-BUS interface, IIS-BUS interface, Sync. SIO interface and PLL for clock.
Embest S3CEV40 EVB consist of S3C44B0X, boot Flash, SDRAM, LCD&TSP touch screen interface, two
serial communication ports, ethernet interface, USB interface, keyboard interface, IIS(sound) interface, exterior
IDE port, Nand Flash, RTC, JTAG interface and 8-SEG.
Embest S3CEV40 EVB provide a high performance and low cost solution for embedded engineers.
Board Supporting Package Contents
Embest S3CEV40 EVB board supporting package contens the following components:
Embest S3CEV40 Evaluation Board
a DB9 plug-to-DB9 socket straight-through serial cable
5.0V DC Power supply
USB cable
Board Software and Documentation CD-ROM.
The evaluation board is capable of supporting different kinds of debugging systems, using an ICE interface.
1
Circuit description
Embest S3CEV40 EVB consists of logic components, several control/status display block, and a debug
interface block. S3CEV40's detailed block diagram, and its components are shown in below figure .
Serial Port Serial Port
8-segment
LED
IDE Interface
8-SEG
Driver
RS232 RS232
Driver Driver
Audio Frequency
IIS Interface
controller
ROM
LCD&TSP
Interface
FLASH Nand Flash
MAC+PHY
ethernet
Magnetic
10M
Port
LED
4¡Á4keyboard
Interface
MCU
S3C44B0X
controller
USB Port
SDRAM
USB
EEPROM
power switch IIC
POWER
Expansion points
2.5V 3.3V
JTAG Interface
reset LED Expansion Points
Bottom
Test area
Hardware Specification
5.0V DC or USB power supply
2 M bytes 16-bit Flash
8 M bytes 16-bit SDRAM
4K bit EEPROM with IIC BUS
Two serial ports
Reset button
two interrupt buttons and two LEDS
2
external IDE port
LCD&TSP touch screen port
20-pin JTAG interface connector
USB connecter
4 groups 2×20 PIN expansion connectors of CPU
10M Ethernet interface connector
8-SEG display
IIS Interface: Speaker & Microphone
16 M Bytes Nand Flash
Test area & test pin
320×240 LCD * Option
4×4 keyboard * Option
Software Specification
Boot software and test software
sample codes
uCos source tree
uClinux source tree
Preload uClinux binary image in flash
Power Supply
S3CEV40 is designed to operate at 2.5V for core and 3.3V for I/O. Power to S3CEV40 is supplied through a
DC jack power adapter which supports the 3.3V voltage drives the current .
Embest Info&Tech Co.,LTD.
Room 509, Luohu Science&Technology Building,
#85 Taining Rd., Shenzhen, Guangdong, China 518020
Tel: +86-755-25635656
Fax: +86-755-25616057
Email:
[email protected] http://www.embedinfo.com
