Scribd
Upload
258 views2 pages

DSE892 Installation Instructions

The document provides installation instructions for the DSE892 SNMP Gateway which communicates with connected controllers to monitor instrumentation and operating states. It can generate SNMP trap messages or emails based on data changes. The document details setup instructions including connecting the gateway to a PC, configuring the IP address and login credentials, and includes typical wiring diagrams and specifications.

Uploaded by

Anonymous fDWyVj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
258 views2 pages

DSE892 Installation Instructions

The document provides installation instructions for the DSE892 SNMP Gateway which communicates with connected controllers to monitor instrumentation and operating states. It can generate SNMP trap messages or emails based on data changes. The document details setup instructions including connecting the gateway to a PC, configuring the IP address and login credentials, and includes typical wiring diagrams and specifications.

Uploaded by

Anonymous fDWyVj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DEEP SEA ELECTRONICS 053-148

ISSUE 1
®
D S E8 9 2 S NMP G AT E W AY
I NST AL L AT I O N I NST R U CT I O NS
®
The DSE892 SNMP Gateway communicates with the connected controller(s) monitoring the
instrumentation and operating state. If the data changes, this can be used to generate SNMP
TRAP messages for receipt by a third party SNMP manager and / or email to one or two
addresses.

SETUP

You may wish to consult your company IT


department before making changes to your PC
network settings.

®
Connect the DSEGateway ethernet port directly
to your PC Ethernet port.
You can use either a ‘straight through’ or
‘crossover’ network cable.

Set the PC IP address as shown.

Using Google Chrome, Microsoft Internet


Explorer or Mozilla Firefox, enter the IP address
of the gateway.
Enter the username and password of the
Gateway.

NOTE:- Username and Password are


both CASE SENSITIVE.

For further details refer to the following DSE


publications available from our website :
www.deepseaplc.com

057-179 DSE892 SNMP Gateway Operator Manual

Factory Settings
IP Address Username Password
192.168.1.100 Admin Password1234

Deep Sea Electronics Plc. Deep Sea Electronics Inc.


Tel:+44 (0)1723 890099 Tel: +1 (815) 316-8706
Fax: +44 (0)1723 893303 Fax: +1 (815) 316- 8708
TOLL FREE (USA only) :
Email: [email protected] Telephone: +1 866 636 9703
Web: www.deepseaplc.com Email: [email protected]
Web: www.deepseausa.com
LED STATUS

DIMENSIONS
Overall size 85 mm x 149 mm x 51 mm
(3.35” x 5.85” x 2.01”)
Mounting type DIN rail or chassis mounting
Indoor Use Only
Din rail type EN 50022 35mm type only
Mounting holes M4 clearance
Mounting hole 73 mm x 137 mm
centres (2.89” x 5.39”)
Maximum Ambient 50ºC
Operating (122ºF)
Temperature

TYPICAL WIRING DIAGRAM

TO MEET UL APPROVALS, PLEASE USE A UL LISTED LIMITED


POWER SUPPLY (8V DC -36V DC)

You might also like