LINEAR DIFFUSERS & GRILLES

Previous View Home Contents Dimensions Specification Performance B1

 LINEAR DIFFUSERS AND BAR GRILLES

Contents

Page No.

General Product Overview B3

Linear Slot Diffusers
Model Series 5000 • 'Ice Tong' Pattern Controllers • Extruded Aluminum
5050 - Supply - 1/2" (13) Slot B5
5075 - Supply - 3/4" (19) Slot B5
5010 - Supply - 1" (25) Slot B5
5050R - Return - 1/2" (13) Slot B5
5075R - Return - 3/4" (19) Slot B5
5010R - Return - 1" (25) Slot B5
B Options and Accessories B11

Linear Slot Diffuser Plenums

Model Series 5300 • Steel
LINEAR DIFFUSERS AND BAR GRILLES

5350/75/10 - Standard Performance B20

5350/75/10MP - Modified Performance B20

Linear Bar Grilles

Model Series 4900 • Fixed Bars • Extruded Aluminum
49-240 - 1/2" (13) Spacing - 1/4" (6) Bars - 0° Deflection B33
49-241 - 1/2" (13) Spacing - 1/4" (6) Bars - 15° Deflection B33
49-243 - 1/2" (13) Spacing - 1/4" (6) Bars - 30° Deflection B33
49-280 - 1/2" (13) Spacing - 1/8" (3) Bars - 0° Deflection B33
49-281 - 1/2" (13) Spacing - 1/8" (3) Bars - 15° Deflection B33
49-480 - 1/4" (6) Spacing - 1/8" (3) Bars - 0° Deflection B33
49-481 - 1/4" (6) Spacing - 1/8" (3) Bars - 15° Deflection B33
Options and Accessories B39

Linear Louver Diffusers

Model Series 48LL • Architectural • Extruded Aluminum
48LL1 - One-way Pattern B49
48LL2 - Two-way Pattern B49

B2 Previous View Home Contents Dimensions Specification Performance

LINEAR DIFFUSERS AND BAR GRILLES

GENERAL PRODUCT OVERVIEW

Linear Diffusers and Bar Grilles
Linear type diffusers and grilles have been developed to satisfy architectural and engineering applications that require
a continuous length appearance, aesthetically pleasing design and high engineering performance with premium quality
aluminum products. Installations can be equally effective where lengths are literally continuous around the periphery
of a wall, floor or ceiling space and certain sections of the unit are active with regard to airflow, satisfying mechanical
and architectural requirements. Individual discreet lengths may be separately installed at reduced cost and offer the
same engineering performance. The proposed application and installed location will usually dictate whether a slot, bar
or louvered type product is the most suitable choice. When the ideal product type has been chosen, the airflow and
performance requirements will dictate the style and sizing selections from a comprehensive range of available sizes
and capacities.

LINEAR DIFFUSERS AND BAR GRILLES

Model 5075 Model Series 5300

Linear Slot Diffusers Plenums for Linear Slot Diffusers

The Nailor Model Series 5000 provides architectural Nailor’s Model Series 5300 Plenums are designed to fit
excellence and outstanding performance flexibility. the 5000 Series Slot Diffusers. The plenums are
Available in three different slot opening widths, a range of constructed from corrosion-resistant steel and are
1 to 10 slots and a wide choice of border/frame styles that available in two different styles for an extensive
co-ordinate with ceiling and installation details. They performance range. The standard constructed plenum is
feature 'ice tong' style individual pattern controllers in suited for applications that require longer throws and
each slot that not only offer a 180° air pattern adjustment, shorter spreads, whereas the modified plenum increases
but can also be used to dampen airflow. the spread and reduces the throw. Specially designed
Designed primarily for ceiling and high sidewall end caps can be turned up for continuous runs. All styles
installation, they are eminently suited to, and are offered with internal or external insulation.
recommended for, VAV applications. They maintain a Standard Performance (non-insulated) –
tight and stable horizontal air pattern over a wide range of Models 5350, 5375, 5310 See page B20
air volumes by utilizing the maximum ceiling coanda Standard Performance (internally insulated) –
effect. Models 5350I, 5375I, 5310I See page B20
Also commonly used in overhead heating applications, Modified Performance (non-insulated) –
the versatile pattern controllers allow vertical projection of
Models 5350MP, 5375MP, 5310MP See page B20
heated air to meet almost any perimeter condition.
Modified Performance (internally insulated) –
Supply Air – Models 5050, 5075, 5010 See page B5 Models 5350IMP, 5375IMP, 5310IMP See page B20
Return Air – Models 5050R, 5075R, 5010R See page B5

Previous View Home Contents Dimensions Specification Performance B3

 LINEAR DIFFUSERS AND BAR GRILLES

Model
49-240 Model
48LL1

Model
49-280

B Model
48LL2
Model
49-480
LINEAR DIFFUSERS AND BAR GRILLES

Linear Bar Grilles Linear Louver Diffusers

The Nailor 4900 Series provides an extruded aluminum The Nailor 48LL Series Linear Louver (Vane)
bar grille that offers beautiful styling and efficient Diffusers are designed to provide a high capacity,
performance. architecturally pleasing linear diffuser that can supply
Linear bar grilles offer a choice of fixed air patterns with large volumes of air at relatively low sound levels and
0°, 15° or 30° air deflection, a choice of bar widths and pressure drops.
spacing and a wide choice of border/frame style High quality, extruded aluminum angular discharge
combinations to suit most types of installation. They are louvers are designed to create a stable horizontal air
available with an optional opposed blade damper for pattern that is tight to the ceiling. Ideal for applications in
volume control. Linear bar grilles are recommended for VAV systems, these diffusers create a strong ceiling
supply air applications in floors, window sills, and high coanda effect at typical maximum and minimum flow
sidewall locations. They are not generally suited to ceiling rates and ensure optimal comfort conditions.
mounted supply applications (other than for directional
Models 48LL1, 48LL2 See page B49
spot heating or cooling as an air curtain) as they are not
Suffix '- O' adds a steel OBD
designed for horizontal projection from the face.
Suffix '- OA' adds an aluminum OBD
Models 49-240, 49-241, 49-243, See page B33
49-280, 49-281, 49-480, 49-481
Suffix '- O' adds a steel OBD

B4 Previous View Home Contents Dimensions Specification Performance

LINEAR SLOT DIFFUSERS

LINEAR SLOT DIFFUSERS

• ALUMINUM CONSTRUCTION
• 'ICE TONG' PATTERN
CONTROLLERS

Supply Models:
5050 1/2" (13) Slot
5075 3/4" (19) Slot
5010 1" (25) Slot
Return Models:
5050R 1/2" (13) Slot
5075R 3/4" (19) Slot
Model 5075
B
5010R 1" (25) Slot

The Series 5000 Linear Slot Ceiling Diffuser has been specially designed to provide both the unobtrusive appearance
required for architectural excellence, and the full 180° pattern controller adjustment at minimum NC levels required for high

LINEAR DIFFUSERS AND BAR GRILLES

engineering performance.
The Series 5000 Diffuser provides stable diffusion under large amounts of air with both constant and changing load conditions.
This is particularly suitable for variable air volume systems.
The Series 5000 Diffusers are available to suit many applications with several choices of mounting frames. Standard finish
is a high quality, hard baked enamel for long life and easy cleaning.
The diffusers are available with mitered corner end caps and feature die-formed components to provide consistent quality
and performance.
FEATURES:
• The volume and direction of the • Diffusers are supplied in lengths of • Mounting sub-frames are cut to
discharge air can be adjusted by up to 6 feet (1829) in a single section. length and assembled in the field.
moving the pattern controllers. • Ideal for continuous length Material: Extruded aluminum frame
• Available with 1 to 10 slots. applications. with corrosion-resistant steel pattern
• Choice of three slot widths to suit • Multiple sections are provided with controllers.
capacity requirements. alignment strips on the frames and Finish: AW Appliance White baked
• The maximum length of the pattern sub-frames to provide superior, enamel frame with black pattern
controller is 36" (914). Diffusers positive field alignment. controllers is standard. Other finishes
longer than 36" (914) are provided • Model 5000R returns and the are available.
with multiple pattern controller Model 5000 supply diffusers are
sections. identical except for the omission of
• Selection of frames and mounting pattern controllers.
sub-frames for various types of
installations.

Supply Model Return Model

5050 S = 1/2" (13) slot 5050R S = 1/2" (13) slot
5075 S = 3/4" (19) slot S 5075R S = 3/4" (19) slot S
5010 S = 1" (25) slot 5010R S = 1" (25) slot

Previous View Home Contents Dimensions Specification Performance B5

 LINEAR SLOT DIFFUSERS

Standard Frame

Various types of frame and Type A Type B

• Flange Frame • Flange Frame
mounting sub-frame combinations • Screw Mounting • Duct Mounting,
for hard ceilings. less screw holes

D
D = Duct Size
S = Slot Width
W = Overall Face Width 1 7/8"
(48)
Standard Frames are the most commonly
specified and readily available from stock.
3/4" S 1 1/8"
(19) (29)
5/32"
W = D + 1 1/8" (29) (4)
Dimensions are in inches (mm). COUNTERSUNK SCREW HOLES FOR #8 SCREWS, 3/8" (10) FROM EDGE

B
Standard Frame Standard Frame
Type C Type D
• Flange Frame • Flange Frame, Narrow Margin
LINEAR DIFFUSERS AND BAR GRILLES

• Concealed Mounting • Concealed Mounting

D D
3 1/2" (89)

3 1/2" (89)
3/16" (5) 3/16" (5)
TO TO
3/4" (19)
1 7/8" (48)

1 7/8" (48)
3/4" (19)

3/4" 1 1/8" 3/4" 7/8"

S S
(19) (29) 5/32" (19) (22) 5/32"
W = D + 3/4" (19) (4) W = D + 1/4" (6) (4)

Type E Type F
• Flush Frame and Sub-Frame • Flange Frame and Sub-Frame
• Concealed Mounting • Concealed Mounting

D D
3 1/4" (83)
3 1/4" (83)

1 7/8" (48)
1 7/8" (48)

3/4" 3/4" 3/4" S 1 1/8"

S
(19) (19) (19) (29) 5/32"
W = D - 1/8" (3) W = D + 3/4" (19) (4)

B6 Previous View Home Contents Dimensions Specification Performance

LINEAR SLOT DIFFUSERS

Type G Type H
• Flush Frame with Plaster and Tile Sub-Frame • Flange Frame with Plaster and Tile Sub-Frame
• Concealed Mounting • Concealed Mounting
D + 1 1/4" (32) D + 1 1/4" (32)
D + 1/2 " (13) D + 1/2" (13)
D D

3 1/4" (83)

3 1/4" (83)
1 7/8" (48)
1 7/8" (48)
1"
1" (25)
(25)

3/4" 7/8" 3/4" 1 1/8"

S S
(19) (22) 1/2" (19) (29) 5/32" 1/2"
W = D - 1/8" (3) (13) W = D + 3/4" (19) (4) (13)

B
Type M Type N
• Flush Frame • Spline Frame Ceiling
• Duct Mounting • Concealed Mounting

LINEAR DIFFUSERS AND BAR GRILLES

• Flangeless Frame
D D

3 1/4" (83)
1 7/8" (48)
1 7/8" (48)

11/32"
1 1/16" (27)

(9)

3/4" 13/32" 3/4" 13/32"

S S
(19) (10) (19) (10)
W = D - 1/8" (3) W = D - 3/4" (19)
1/4" (6)

Consult page B10 for Type T Lay-in

Alignment Strips
T-Bar and Type FL Fineline ®
Alignment strips on the frames and sub-frames provide Frame.
superior, positive alignment on multiple section assemblies.

For the availability of other frames

and supporting methods, contact
your Nailor representative for
assistance.

For duct dimensions D see next page.

Frame Sub-frame
Dimensions are in inches (mm).

Previous View Home Contents Dimensions Specification Performance B7

 LINEAR SLOT DIFFUSERS

Duct Width D Dimension for Available Frames

Imperial Units (inches)
No. 5050 5075 5010 No. 5050 5075 5010 No. 5050 5075 5010
Frame Frame Frame
of 5050R 5075R 5010R of 5050R 5075R 5010R of 5050R 5075R 5010R
Type Type Type
Slots S=1/2 S=3/4 S=1 Slots S=1/2 S=3/4 S=1 Slots S=1/2 S=3/4 S=1
1 1 5/8 1 7/8 2 1/8 1 2 2 1/4 2 1/2 1 2 1/4 2 1/2 2 3/4
2 2 7/8 3 3/8 3 7/8 2 3 1/4 3 3/4 4 1/4 2 3 1/2 4 4 1/2
3 4 1/8 4 7/8 5 5/8 3 4 1/2 5 1/4 6 3 4 3/4 5 1/2 6 1/4
4 5 3/8 6 3/8 7 3/8 4 5 3/4 6 3/4 7 3/4 4 6 7 8
A 5 6 5/8 7 7/8 9 1/8 C 5 7 8 1/4 9 1/2 5 7 1/4 8 1/2 9 3/4
E
B 6 7 7/8 9 3/8 10 7/8 D 6 8 1/4 9 3/4 11 1/4 6 8 1/2 10 11 1/2
7 9 1/8 10 7/8 12 5/8 7 9 1/2 11 1/4 13 7 9 3/4 11 1/2 13 1/4
8 10 3/8 12 3/8 14 3/8 8 10 3/4 12 3/4 14 3/4 8 11 13 15
9 11 5/8 13 7/8 16 1/8 9 12 14 1/4 16 1/2 9 12 1/4 14 1/2 16 3/4
10 12 7/8 15 3/8 17 7/8 10 13 1/4 15 3/4 18 1/4 10 13 1/2 16 18 1/2

No. 5050 5075 5010 No. 5050 5075 5010 No. 5050 5075 5010
Frame Frame Frame
of 5050R 5075R 5010R of 5050R 5075R 5010R of 5050R 5075R 5010R
Type Type Type
B Slots S=1/2 S=3/4 S=1 Slots S=1/2 S=3/4 S=1 Slots S=1/2 S=3/4 S=1
1 2 2 1/4 2 1/2 1 2 1/2 2 3/4 3 1 1 3/8 1 5/8 1 7/8
2 3 1/4 3 3/4 4 1/4 2 3 3/4 4 1/4 4 3/4 2 2 5/8 3 1/8 3 5/8
3 4 1/2 5 1/4 6 3 5 5 3/4 6 1/2 3 3 7/8 4 5/8 5 3/8
F 4 5 3/4 6 3/4 7 3/4 4 6 1/4 7 1/4 8 1/4 4 5 1/8 6 1/8 7 1/8
5 7 8 1/4 9 1/2 5 7 1/2 8 3/4 10 5 6 3/8 7 5/8 8 7/8
LINEAR DIFFUSERS AND BAR GRILLES

H 6 8 1/4 9 3/4 11 1/4

G 6 8 3/4 10 1/4 11 3/4
M 6 7 5/8 9 1/8 10 5/8
N 7 9 1/2 11 1/4 13 7 10 11 3/4 13 1/2 7 8 7/8 10 5/8 12 3/8
8 10 3/4 12 3/4 14 3/4 8 11 1/4 13 1/4 15 1/4 8 10 1/8 12 1/8 14 1/8
9 12 14 1/4 16 1/2 9 12 1/2 14 3/4 17 9 11 3/8 13 5/8 15 7/8
10 13 1/4 15 3/4 18 1/4 10 13 3/4 16 1/4 18 3/4 10 12 5/8 15 1/8 17 5/8

Metric Units (mm)

No. 5050 5075 5010 No. 5050 5075 5010 No. 5050 5075 5010
Frame Frame Frame
of 5050R 5075R 5010R of 5050R 5075R 5010R of 5050R 5075R 5010R
Type Type Type
Slots S=13 S=19 S=25 Slots S=13 S=19 S=25 Slots S=13 S=19 S=25
1 41 48 54 1 51 57 64 1 57 64 70
2 73 86 98 2 83 95 108 2 89 102 115
3 105 124 143 3 114 133 152 3 121 140 159
4 137 162 187 4 146 171 197 4 152 178 203
A 5 168 200 232 C 5 178 210 241 5 184 216 248
B E
6 200 238 276 D 6 210 248 286 6 216 254 292
7 232 276 321 7 241 286 330 7 248 292 337
8 264 314 365 8 273 324 375 8 279 330 381
9 295 352 410 9 305 362 419 9 312 368 425
10 327 391 454 10 337 400 464 10 343 406 470

No. 5050 5075 5010 No. 5050 5075 5010 No. 5050 5075 5010
Frame Frame Frame
of 5050R 5075R 5010R of 5050R 5075R 5010R of 5050R 5075R 5010R
Type Type Type
Slots S=13 S=19 S=25 Slots S=13 S=19 S=25 Slots S=13 S=19 S=25
1 51 57 64 1 64 70 76 1 35 41 48
2 83 95 108 2 95 108 121 2 67 79 92
3 115 133 152 3 127 146 165 3 98 117 137
F 4 146 171 197 4 159 184 210 4 130 156 181
5 178 210 241 5 191 222 254 5 162 194 225
H 6 210 248 286
G 6 222 260 298
M 6 194 232 270
N 7 241 286 330 7 254 298 343 7 225 270 314
8 273 324 375 8 286 337 387 8 257 308 359
9 304 362 419 9 318 375 432 9 289 346 400
10 337 400 464 10 349 413 476 10 321 384 448

B8 Previous View Home Contents Dimensions Specification Performance

LINEAR SLOT DIFFUSERS

End Cap Configurations for Various Mountings

M - MITERED END CAP (Standard) F - FLANGED END CAP
L L
D D
E E

Frame types A, B,
C, D, F, G and H only.
Field attachable.
Suitable for stocking representatives.
B
O - OPEN END C - FLAT END CAP
L D
E E
D L

LINEAR DIFFUSERS AND BAR GRILLES

Overall Length Dimensions and End Cap Position
D = Duct Length E = End Cap Position L = Overall Length

Frame
M M F F M O M C O O O C C C
Type F C
F O
E L E L E L ✝ E L ✝ E L E L E L
A, B D-1/2 (13) D+1 (25) D-1/2 (13) D+1 1/2 (38) D-1/4 (6) D+1/2 (13) D-3/16 (5) D+9/16 (14) D D D-1/16 (2) D-1/16 (2) D-1/8 (3) D-1/8 (3)

C D-1/2 (13) D+1 (25) D-1/2 (13) D+1 1/2 (38) D-1/4 (6) D+1/2 (13) D-3/16 (5) D+9/16 (14) D D D-1/16 (2) D-1/16 (2) D-1/8 (3) D-1/8 (3)

D D-1/2 (13) D+1/2 (13) D-1/2 (13) D+1 (25) D-1/4 (6) D+1/4 (6) D-3/16 (5) D+7/16 11) D D D-1/16 (2) D-1/16 (2) D-1/8 (3) D-1/8 (3)

E D-7/8 (22) D – – D-7/16 (11) D D-3/8 (10) D+1/16 (2) D D D-1/16 (2) D-1/16 (2) D-1/8 (3) D-1/8 (3)

F, H D-3/4 (19) D+3/4 (19) D-3/4 (19) D+3/4 (19) D-3/8 (10) D+3/8 (10) D-5/16 (8) D+7/16 (11) D D D-1/16 (2) D-1/16 (2) D-1/8 (3) D-1/8 (3)

G D-1/8 (3) D D-1/8 (3) D D-9/16 (14) D D-1/2 (13) D+1/16 (2) D D D-1/16 (2) D-1/16 (2) D-1/8 (3) D-1/8 (3)

M*, N* D-1/16 (2) D-1/16 (2) – – D-1/32 (1) D-1/32 (1) D-1/16 (2) D-1/16 (2) D D D-1/16 (2) D-1/16 (2) D-1/8 (3) D-1/8 (3)

✝ Configurations FO and FC: Add 1/4" (6) for frame types A, B, C, D, F, G and H. Dimensions are in inches (mm).
Not available on frame types E, M and N.
* These types have a flangeless mitered end cap which is the same extrusion profile as the frame.

Previous View Home Contents Dimensions Specification Performance B9

 LINEAR SLOT DIFFUSERS

Standard Lay-in T-Bar Application Type T Frame

• For standard 15/16" (24) or *9/16" (14) face
Designed and fabricated specifically to integrate with standard exposed lay-in T-Bar
grid T-Bar Ceiling Systems. T-BAR SPACING = D + 1" (25)
Available in nominal lengths to suit both imperial and metric ceiling grid W = D + 3/4" (19)
D = NOM. DUCT OR PLENUM WIDTH
modules.
Imperial module lengths: 20", 24", 48" and 60".
Metric module lengths: 500, 600, 1200 and 1500 mm.

1 3/4" (44)
Also available in custom lengths for special applications and in multiple
section assemblies for continuous paired T-Bar ceilings.

*Type CC Flat Endcaps are not recommended for use with 9/16" (14) flat 15/16" 3/4" 7/8"
S
face T-bar. (24) (19) (22)

Duct Width D Dimension End Cap Configurations • Type T Frame

(Frames T and FL) Type MM
• Mitered End Caps (standard)
No. Imperial Units (inches) Metric Units (mm) CM = CEILING MODULE
B of 5050 (R) 5075 (R) 5010 (R) 5050 (R) 5075 (R) 5010 (R) LENGTH = CM - 1/4" (6)
NOM. DUCT OR PLENUM LENGTH = CM - 1" (25)
Slots S = 1/2 S = 3/4 S=1 S = 13 S = 19 S = 25 END CAP POSITION = CM - 1 3/16" (30)
1 1 1/2 1 3/4 2 38 44 51
2 2 3/4 3 1/4 3 3/4 70 83 95
3 4 4 3/4 5 1/2 102 121 140
4 5 1/4 6 1/4 7 1/4 133 159 184
LINEAR DIFFUSERS AND BAR GRILLES

5 6 1/2 7 3/4 9 165 197 229

6 7 3/4 9 1/4 10 3/4 197 235 273 *Type CC
7 9 10 3/4 12 1/2 229 273 318 • Flat End Caps
8 10 1/4 12 1/4 14 1/4 260 311 362 CM = CEILING MODULE
9 11 1/2 13 3/4 16 292 349 406 NOM. DUCT OR PLENUM LENGTH = CM - 3/8" (10)
END CAP POSITION/LENGTH = CM - 1/2" (13)
10 12 3/4 15 1/4 17 3/4 324 387 451

End Cap Configuration • Type FL Frame

Type MM
• Mitered End Caps (standard)
CM = CEILING MODULE
CM - 1/8" (3)
NOM. DUCT OR PLENUM LENGTH = CM - 3/8" (10)

CM - 5/8" (16)

Fineline® Type Ceiling Systems Type FL Frame

• For Fineline® type ceilings
Nailor can fabricate the 5000 Series to integrate with most available
Fineline® or Regressed T-Bar type ceiling systems. W + 5/8" (16)
D
The Type FL frame is compatible with both the USG Interiors Inc.
'Donn Fineline®' and Chicago Metallic Corporation 'Ultraline® '
3500/3600 systems. For other ceiling systems, contact your Nailor 5/16"
representative. (8)

'Fineline®' is a registered trademark of USG Interiors Inc. 3/4" (19)

'Ultraline®' is a registered trademark of Chicago Metallic Corporation. W = D - 1/4" (6) 9/16" (14)

B10 Previous View Home Contents Dimensions Specification Performance

LINEAR SLOT DIFFUSERS

Options and Accessories

O
90° Mitered Corners D' = DUCT SIZE
D' = Duct Size
5050MC • 1/2" (13) Slot No. of
D'
Slots
5075MC • 3/4" (19) Slot
1 to 4 12 (305)
5010MC • 1" (25) Slot
5 to 10 24 (610)
The standard mitered corner is 90°. Units are
factory welded with precision to match and align
with the associated straight leg.
90° Mitered Corner Dimension 'O'
Units are supplied with factory installed blank-
offs in the slot (painted black) and are inactive. No. of Frame Type
Slots A, B C, F, H D E, G, J M, N
For compound angles, contact your Nailor
representative. 1–4 12 9/16 (319) 12 3/8 (314) 12 1/8 (308) 11 7/8 (302) 12 (305)
5 – 10 24 9/16 (624) 24 3/8 (619) 24 1/8 (613) 23 7/8 (606) 24 (610)
Dimensions are in inches (mm).

B
Plenums W W 1 1/4"
(32)
NOMINAL LENGTH

Uninsulated Models:
5350 • 1/2" (13) Slot

D - 1/8" (3)
5375 • 3/4" (19) Slot

LINEAR DIFFUSERS AND BAR GRILLES

5310 • 1" (25) Slot 11"
(279)
Insulated Models:
5350I • 1/2" (13) Slot
5375I • 3/4" (19) Slot 1 1/2" (38)
5310I • 1" (25) Slot 1/4" (6)
OPTIONAL 5300MP OPTIONAL
HEMMED STRAIGHT
MODIFIED PLENUM INTERNAL
LEG LEG
INSULATION

Standard Plenums have square shoulders. An

optional modified plenum is available with the
addition of integral baffles (add suffix MP) which
provides a reduction in throw and increased
spread of the air pattern.

Field Trimming of Diffusers

If “X” is less than 3" (76) at either end (6" (152)
total), standard Model 5000 or 5000R can be
field-cut.
• Factory-Cut Diffusers Model 5000 or 5000R
are ordered for a specific length from the
factory, but can be trimmed as much as 6"
(152) in length, (3" (76) from each end) with a
fine tooth, high speed carbon steel metal
cutting blade. CUT
X

BO Blank-Offs
• Cold-Rolled Steel
• Fits over Neck Shipped in 6' (1829) lengths
• Black Finish to be field-cut.

Previous View Home Contents Dimensions Specification Performance B11

 LINEAR SLOT DIFFUSERS

Typical Diffuser and Sub-Frame Assembly

SIDE FIELD
ASSEMBLED
Mounting sub-frames are supplied RAIL
CORNER
ALIGNMENT
only with Types E, F, G and H. STRIPS
TEMPORARY
GAUGE

FIELD
ASSEMBLED
CORNER

END SUB-FRAME

TEMPORARY
GAUGE
MITERED
B ALIGNMENT
CORNER
SECTION
STRIPS (INACTIVE)

SPRING
CLIP
LINEAR DIFFUSERS AND BAR GRILLES

FACTORY BLANK-OFFS:
INSTALLED OPTIONAL FOR
SPACER INACTIVE SECTIONS.
BLADE ALIGNMENT SUPPLIED AS
TYPE C
TYPE M SUPPORT STRIPS STANDARD ON
FLAT
MITERED END CAP BAR MITERED CORNERS
END (OPTIONAL) WHICH ARE
CAP RENDERED INACTIVE.
(STANDARD)

PATTERN
CONTROLLERS

UP TO 3" (76) CAN BE FIELD TRIMMED FROM

EACH END OF AN OPEN ENDED SECTION.

Diffuser Assembly Features: Sub-Frame Features:

• Diffusers can be joined together end to end to form long • Supplied with Frame Types E, F, G and H.
continuous slots. • Assures a clean, accurately dimensioned opening to
• The standard Type M end cap is mitered and offers a receive the diffuser.
superior architectural finish on the visible surface. • Allows the diffuser to be installed at the end of the job,
• The optional Type F end cap can be field installed. minimizing risk of damage or contamination from paint or
• The optional Type C flat end cap may be used where the plaster.
diffuser ends at a wall or other stopping point. • Diffuser can be simply removed and replaced without
• The standard 90° mitered corner section is factory welded damage to architectural ceiling finishes.
and fully assembled to ensure a smooth professional finish. • Types E, F, G and H are ideal as a wet plaster ground. In
They are inactive. this case they should be installed sufficiently proud to allow
• Alignment strips are factory supplied as standard on all for the finished ceiling thickness.
multiple section frame and sub-frame assemblies and • Types E and G are designed to leave a diffuser totally
ensure close and positive alignment between sections. flush with the finished ceiling.
• Types F and H are designed to leave a surface mount
diffuser appearance.
• Type E may also be used where a diffuser runs flush along
a wall.

B12 Previous View Home Contents Dimensions Specification Performance

LINEAR SLOT DIFFUSERS

Hemmed Duct Preparation Auxiliary Sub-Frame Preparation

Types C and D Types E, F, G and H

HEMMED
DUCT

CEILING

• Far and away the most popular type of installation. • Sub-frame should be attached to inside of duct and/or a
Simple and quick. framed ceiling opening as deemed necessary.
• Diffuser simply pushes up into duct until the legs of • Factory supplied mounting straps locate into an extrusion
the factory supplied mounting straps locate into the
hems of the duct.
slot in the sub-frame. Installation of diffuser is similar to
the hemmed duct method shown to the left.
B
• Factory supplied levelling screws then draw the
diffuser up until it is tight and snug with the ceiling.
• Duct should be fabricated with a 1/2" (13) hem on
both long sides and opened approximately 1/8" (3).

LINEAR DIFFUSERS AND BAR GRILLES

Continuous Run Dimensions
OVERALL LENGTH
D = DUCT LENGTH
12" (305) D = DUCT LENGTH = DIM. L (TYPE 'OO') 12" (305)

DIM. D' = D' =

'O' 12" 12"
(305) (305)
2 3 4 5 6

L= L=
OVERALL OVERALL
LENGTH PLAN VIEW LENGTH

D= (LOOKING DOWN INTO INLET) D=

DIM. DUCT 1 7 DUCT
L LENGTH LENGTH

The above example illustrates a typical 3 slot installation Note: It is extremely difficult to achieve a perfect installation
with two 90° mitered corner sections. where compound miters are involved, such as above, when
➀ Type 'CO' End Cap configuration. all sections are ordered from the factory fabricated to suit
② and ⑥ 'MC' Mitered Corner Section. finished duct dimensions. This is due to field tolerance
③, ④ and ➄ Type 'OO' End Cap configuration. variations which may prevent proper alignment and butting
➆ Type 'MO' End Cap configuration. together of individual sections due to insufficient material.
Each straight section, regardless of total duct length It is recommended that section ③, ④ or ➄ is ordered
may be ordered as a single section. oversize by 3" (76) and field cut to suit field conditions. 'OO'
Example: configuration lengths can be trimmed by up to 6" (152). 3"
(76) from each end.
➀ and ➆ Each section may be ordered as a single
item, regardless of total length.
③, ④ and ➄ One section may be ordered, regardless of
total length.
Multiple sections are sub-divided by the factory into
equal length sections at the factories' discretion.

Previous View Home Contents Dimensions Specification Performance B13

 LINEAR SLOT DIFFUSERS

HOW TO SPECIFY OR TO ORDER

(Show complete Model Number and Size, unless "Default" is desired).

Extruded Aluminum Linear Slot Diffusers – Model Series 5000

5075 - 48" x 2 Slot - C - AW - MM - —

MODEL ACCESSORIES
- Linear Slot Diffuser 50 - Angle Cut One End AC1
- Angle Cut Both Ends AC2

SLOT WIDTH / FABRICATION

- Supply 1/2" (13) 50 END CAP CONFIGURATION
3/4" (19) 75 - Mitered Mitered (default) MM
1" (25) 10 - Mitered Open MO
- Mitered Flat MC
- Return 1/2" (13) 50R - Open Open OO
B 3/4" (19) 75R - Open Flat OC
1" (25) 10R - Flat Flat CC
- Flanged Flanged FF
- Mitered Corner 1/2" (13) 50MC - Flanged Open FO
3/4" (19) 75MC - Flanged Flat FC
LINEAR DIFFUSERS AND BAR GRILLES

1" (25) 10MC

FINISH
- Blank-offs* 1/2" (13) 50BO - Appliance White (default) AW
3/4" (19) 75BO - Aluminum AL
1" (25) 10BO - Brushed and Clear Coat Lacquer BC
- Mill MI
- Special SP
NOMINAL LENGTH
(inches or feet and inches)
FRAME OR FRAME/SUB-FRAME
COMBINATION
- 1 1/8" Flange Frame, Screw Holes A
NO. OF SLOTS
- 1 1/8" Flange Frame, No Screw Holes B
- 1 thru 10
- 1 1/8" Flange Frame, Concealed Mounting C
- 7/8" Flange Frame, Concealed Mounting D
- 3/4" Flush Frame/Sub-frame E
- 1 1/8" Flange Frame/Sub-frame F
- 7/8" Flush Frame/Plaster Sub-frame G
- 1 1/8" Flange Frame/Plaster Sub-frame H
- Flangeless Frame M
- Spline Frame, Concealed Mounting N
- T-Bar Lay-in, 7/8" Flange Frame T
- Fineline Frame
®
FL

Notes:
1. Flanged end caps (FF) may be shipped loose upon request for field attachment and are intended for use with field cut
sections or for use by stocking representatives.
2. It is helpful to include a sketch for multiple sectioned units with mitered corners and angle cuts. Specify exact outside
length of duct run and angles.
3. For lay-in T-Bar installations, specify nominal T-Bar opening length.
4.*Blank-offs are supplied in 6' (1829) lengths, therefore, 'No. of Slots' is the only required variant that needs to be specified.

B14 Previous View Home Contents Dimensions Specification Performance

LINEAR SLOT DIFFUSERS

SUGGESTED SPECIFICATION: Specification Text File

Models 5010, 5075, 5050
Furnish and install Nailor Model (select one) 5010 (1" (25) slot), 5075 (3/4" (19) slot), or 5050 (1/2" (13) slot) Linear Slot
Supply Diffusers of the sizes and capacities as shown on the plans and air distribution schedules. The maximum length of a
single section shall be 72" (1829) long. All sizes larger than 72" (1829) will be provided in continuous multiple sections.
Alignment strips are to be provided for joining continuous diffuser sections together. The frame borders and end caps shall be
extruded aluminum with extruded aluminum spacers. The linear shall be supplied in 1 – 10 slots wide as specified. Pattern
deflectors shall have an aerodynamic ' ice tong ' shape that can be adjusted to regulate the volume and direction of the airflow.
The maximum length of the deflectors shall be 36" (914), longer sizes shall be provided in multiple sections. The pattern
deflector finish shall be black. The frame/border finish is to be AW Appliance White baked enamel (optional finishes are
available).
The manufacturer shall provide published performance data for the linear slot diffuser, which shall be tested in accordance with
ANSI/ASHRAE Standard 70 – 2006.
Specification Text File
Models 5010R, 5075R, 5050R
Furnish and install Nailor Model (select one) 5010R (1" (25) slot), 5075R (3/4" (19) slot), or 5050R (1/2" (13) slot) Linear Slot
Return Diffusers of the sizes and capacities as shown on the plans and air distribution schedules. The maximum length of a
single section shall be 72" (1829) long. All sizes larger than 72" (1829) will be provided in continuous multiple sections.
Alignment strips are to be provided for joining continuous diffuser sections together. The frame border and end caps shall be B
extruded aluminum with extruded aluminum spacers. The linear shall be supplied in 1 – 10 slots wide as specified. The finish
is to be AW Appliance White baked enamel (optional finishes are available).
The manufacturer shall provide published performance data for the linear slot diffuser, which shall be tested in accordance with
ANSI/ASHRAE Standard 70 – 2006.

LINEAR DIFFUSERS AND BAR GRILLES

Previous View Home Contents Dimensions Specification Performance B15

 LINEAR SLOT DIFFUSERS

Performance Data
Supply • Continuous Pressurized Plenum.
Model 5050 • 1/2" (13) Slot
No. of Total H .005 .020 .041 .074 .120 .173 .230 .310
Slots Pressure V .003 .014 .027 .051 .083 .116 .158 .215
CFM per Ft. 5 10 15 20 25 30 35 40
H 1-1-6 3-6-12 6-10-14 8-12-18 10-14-18 12-14-20 12-14-20 14-16-24
1 Throw
V 2 6 9 11 12 13 14 15
NC — –– 17 21 26 31 35 38
CFM per Ft. 10 20 30 40 50 60 70 80
H 1-3-9 4-9-16 6-12-20 10-16-22 14-18-24 16-20-28 18-20-30 18-22-32
2 Throw
V 3 7 12 14 15 17 18 20
NC — 15 20 24 28 34 38 41
CFM per Ft. 15 30 45 60 75 90 105 120
H 2-4-10 6-12-20 10-16-24 14-20-28 18-20-30 20-24-38 20-24-40 22-28-44
3 Throw
V 4 10 15 18 21 22 25 23
NC — 16 21 26 31 36 40 43
B CFM per Ft. 20 40 60 80 100 120 140 160
H 3-5-12 8-12-22 12-18-28 16-22-32 20-24-40 22-28-44 24-30-48 26-32-52
4 Throw
V 6 11 16 20 22 24 26 29
NC — 17 22 27 32 37 41 44
CFM per Ft. 25 50 75 100 125 150 175 200
LINEAR DIFFUSERS AND BAR GRILLES

H 3-6-14 8-14-24 14-20-30 18-24-40 22-28-46 26-32-50 28-40-52 30-40-58

5 Throw
V 6 12 20 26 27 30 30 33
NC — 18 23 28 33 38 42 45
CFM per Ft. 30 60 90 120 150 180 210 240
H 4-7-16 10-16-28 14-20-38 20-28-44 24-32-50 28-40-54 30-42-58 32-46-64
6 Throw
V 6 14 20 25 27 30 33 34
NC — 19 24 29 34 39 43 46
CFM per Ft. 35 70 105 140 175 210 245 280
H 5-8-18 12-18-30 16-24-42 22-30-48 26-36-54 30-42-58 38-46-64 40-48-68
7 Throw
V 6 14 22 27 30 32 36 38
NC — 19 24 29 34 39 43 46
CFM per Ft. 40 80 120 160 200 240 280 320
H 6-10-20 14-20-32 18-30-44 24-36-52 28-40-58 32-46-64 40-48-68 42-52-72
8 Throw
V 7 15 24 29 33 36 39 40
NC 10 20 25 30 35 40 44 47

NC Correction Factors for Various Lengths Throw Correction Factors for Various Lengths
Length (ft.) 2 4 6 8 9 10 15 Length (ft.) 2 4 6 8 10 12
Supply -3 0 +2 +3 +4 +5 +8 Multiplier 0.70 1.0 1.25 1.40 1.55 1.70
Return 0 +3 +4 +6 +7 +8 + 10

1. Data is based upon pressurized sections 4 ft. long. For other lengths, 7. Data derived from tests conducted in
plenum application (non ducted) with use the correction factor table above. accordance with ANSI/ASHRAE
no plenum effect for pressure or sound. 5. NC (Noise criteria) values are based Standard 70-2006.
Plenums should be sized to achieve on 10 dB room absorption, re 10-12
equal velocity along the slot length. watts, for a 4 ft. section. For other Number Ak Factor per foot
Keep duct inlet velocities below 700 lengths, use the correction factor table of
fpm in order to maintain cataloged above. Slots Supply Return
performance. 1 .018 .033
6. Throw values are for a 1-way air
2. All pressures are in inches w.g.. pattern. For divided airflow, deduce the 2 .035 .066
3. Horizontal throws are given at airflow in each direction according to 3 .053 .099
150,100 and 50 fpm terminal velocities. the number of slots, with the total 4 .070 .132
Vertical throws are given at 50 fpm airflow apportioned between the slots. 5 .088 .165
terminal velocity. Both under isothermal Look up throw for the airflow in each 6 .105 .198
conditions. direction according to the number of 7 .123 .231
slots in that direction. 8 .140 .264
4. Throw data are based on active
B16 Previous View Home Contents Dimensions Specification Performance
 LINEAR SLOT DIFFUSERS

Performance Data
Supply • Continuous Pressurized Plenum.
Model 5075 • 3/4" (19) Slot
No. of Total H .004 .017 .030 .055 .089 .123 .176 .256
Slots Pressure V .003 .012 .026 .042 .065 .092 .125 .174
CFM per Ft. 5 10 20 25 30 35 40 50
H 1-1-5 2-5-14 5-9-16 7-14-21 12-16-23 14-16-23 16-18-25 16-21-28
1 Throw
V 2 6 10 12 13 14 15 16
NC — — 16 21 26 30 33 38
CFM per Ft. 10 20 40 50 60 70 80 100
H 1-2-10 4-9-21 7-16-23 14-21-28 16-23-32 21-23-35 21-25-44 23-28-46
2 Throw
V 3 8 11 15 18 20 21 22
NC — — 19 24 29 33 36 41
CFM per Ft. 15 30 60 75 90 105 120 150
H 2-4-12 6-12-23 12-18-30 16-23-35 21-28-46 23-30-48 28-32-53 28-35-55
3 Throw
V 6 10 15 19 20 24 25 27
NC — — 21 26 31 35 38 43
CFM per Ft. 20 40 80 100 120 140 160 200 B
H 2-5-14 8-14-28 16-23-35 21-28-46 23-32-53 28-35-55 32-44-60 32-46-64
4 Throw
V 5 11 18 21 25 27 30 31
NC — — 22 27 32 36 39 44
CFM per Ft. 25 50 100 125 150 175 200 250

LINEAR DIFFUSERS AND BAR GRILLES

H 3-7-16 9-16-32 16-23-46 23-32-53 28-37-58 32-46-62 35-48-67 44-53-74
5 Throw
V 6 12 18 25 28 30 34 35
NC — — 23 28 33 37 40 45
CFM per Ft. 30 60 120 150 180 210 240 300
H 4-8-17 10-18-35 18-28-48 23-35-55 30-46-62 35-48-69 44-53-74 46-58-78
6 Throw
V 7 13 21 25 30 32 36 39
NC — — 24 29 34 38 41 46
CFM per Ft. 35 70 140 175 210 245 280 350
H 5-9-18 11-21-38 21-30-53 28-44-60 32-48-67 44-53-74 46-58-81 51-60-85
7 Throw
V 8 16 22 29 33 35 40 42
NC — — 24 29 34 38 41 46
CFM per Ft. 40 80 160 200 240 280 320 400
H 6-10-21 12-21-41 21-32-55 28-46-64 37-53-74 46-58-78 51-60-85 53-64-90
8 Throw
V 8 17 21 30 35 40 42 43
NC — 15 25 30 35 39 42 47

NC Correction Factors for Various Lengths Throw Correction Factors for Various Lengths
Length (ft.) 2 4 6 8 9 10 15 Length (ft.) 2 4 6 8 10 12
Supply -3 0 +2 +3 +4 +5 +8 Multiplier 0.70 1.0 1.25 1.40 1.55 1.70
Return 0 +3 +4 +6 +7 +8 + 10

1. Data is based upon pressurized sections 4 ft. long. For other lengths, 7. Data derived from tests conducted in
plenum application (non ducted) with use the correction factor table above. accordance with ANSI/ASHRAE
no plenum effect for pressure or sound. 5. NC (Noise criteria) values are based Standard 70-2006.
Plenums should be sized to achieve on 10 dB room absorption, re 10-12
equal velocity along the slot length. watts, for a 4 ft. section. For other Number Ak Factor per foot
Keep duct inlet velocities below 700 lengths, use the correction factor table of
fpm in order to maintain cataloged above. Slots Supply Return
performance. 1 .024 .039
6. Throw values are for a 1-way air
2. All pressures are in inches w.g.. pattern. For divided airflow, deduce the 2 .049 .078
3. Horizontal throws are given at airflow in each direction according to 3 .073 .117
150,100 and 50 fpm terminal velocities. the number of slots, with the total 4 .098 .156
Vertical throws are given at 50 fpm airflow apportioned between the slots. 5 .122 .195
terminal velocity. Both under isothermal Look up throw for the airflow in each 6 .146 .234
conditions. direction according to the number of 7 .171 .273
slots in that direction. 8 .195 .312
4. Throw data are based on active
Previous View Home Contents Dimensions Specification Performance B17
 LINEAR SLOT DIFFUSERS

Performance Data
Supply • Continuous Pressurized Plenum.
Model 5010 • 1" (25) Slot
No. of Total H .004 .016 .036 .065 .098 .138 .192 .245
Slots Pressure V 002 .009 .024 .038 .057 .082 .113 .148
CFM per Ft. 10 15 25 30 40 50 55 65
H 1-4-10 3-6-13 8-13-18 10-16-21 13-16-23 16-18-26 18-18-26 18-21-29
1 Throw
V 2 8 12 13 15 16 17 18
NC — — 18 22 29 34 37 41
CFM per Ft. 20 30 50 60 80 100 110 130
2 H 3-7-18 5-10-21 13-18-26 16-21-31 18-23-39 21-26-42 23-34-44 26-39-47
Throw
V 4 10 16 19 20 21 23 25
NC — 10 21 25 32 37 40 44
CFM per Ft. 30 45 75 90 120 150 165 195
H 5-9-21 8-14-26 16-21-31 18-26-42 23-29-47 26-31-49 29-34-55 31-36-57
3 Throw
V 6 11 18 22 25 27 30 31

B NC
CFM per Ft.
—
40
—
60
23
100
27
120
34
160
39
200
42
220
46
260
H 8-10-26 12-19-31 18-26-42 21-29-47 26-39-55 29-42-57 31-44-62 34-47-68
4 Throw
V 7 13 21 26 29 30 34 36
NC — — 24 28 35 40 43 47
CFM per Ft. 50 75 125 150 200 250 275 325
LINEAR DIFFUSERS AND BAR GRILLES

H 10-12-29 16-21-36 20-29-47 23-34-52 31-44-60 39-47-68 42-49-73 44-52-78

5 Throw
V 8 15 22 27 30 36 37 40
NC — — 25 29 36 41 44 48
CFM per Ft. 60 90 150 180 240 300 330 390
H 11-14-31 18-23-39 21-31-42 26-42-57 39-47-68 42-52-70 44-57-75 47-60-81
6 Throw
V 8 17 26 30 34 36 41 44
NC — 15 26 30 37 42 45 49
CFM per Ft. 70 105 175 210 280 350 385 455
H 12-16-39 20-26-44 26-39-55 29-44-60 42-52-73 47-55-78 49-60-83 52-62-88
7 Throw
V 9 18 28 32 37 41 43 48
NC — 15 26 30 37 42 45 49
CFM per Ft. 80 120 200 240 320 400 440 520
H 13-18-42 21-29-47 26-42-57 34-47-68 47-55-78 49-57-81 55-62-86 57-68-94
8 Throw
V 11 20 30 35 40 45 50 51
NC — 16 27 31 38 43 46 50

NC Correction Factors for Various Lengths Throw Correction Factors for Various Lengths
Length (ft.) 2 4 6 8 9 10 15 Length (ft.) 2 4 6 8 10 12
Supply -3 0 +2 +3 +4 +5 +8 Multiplier 0.70 1.0 1.25 1.40 1.55 1.70
Return 0 +3 +4 +6 +7 +8 + 10

1. Data is based upon pressurized sections 4 ft. long. For other lengths, 7. Data derived from tests conducted in
plenum application (non ducted) with use the correction factor table above. accordance with ANSI/ASHRAE
no plenum effect for pressure or sound. 5. NC (Noise criteria) values are based Standard 70-2006.
Plenums should be sized to achieve on 10 dB room absorption, re 10-12
equal velocity along the slot length. watts, for a 4 ft. section. For other Number Ak Factor per foot
Keep duct inlet velocities below 700 lengths, use the correction factor table of
fpm in order to maintain cataloged above. Slots Supply Return
performance. 1 .030 .044
6. Throw values are for a 1-way air
2. All pressures are in inches w.g.. pattern. For divided airflow, deduce the 2 .060 .088
3. Horizontal throws are given at airflow in each direction according to 3 .090 .132
150,100 and 50 fpm terminal velocities. the number of slots, with the total 4 .121 .176
Vertical throws are given at 50 fpm airflow apportioned between the slots. 5 .151 .220
terminal velocity. Both under isothermal Look up throw for the airflow in each 6 .181 .264
conditions. direction according to the number of 7 .211 .308
slots in that direction. 8 .241 .352
4. Throw data are based on active
B18 Previous View Home Contents Dimensions Specification Performance
 LINEAR SLOT DIFFUSERS

Performance Data
Model 5050R • 1/2" (13) Slot
Plenum Return
No. of
Slots SP .011 .024 .045 .070 .108 .184 .279 .421
CFM per Ft. 10 15 20 25 30 40 50 60
1
NC — — — 20 26 34 39 45
CFM per Ft. 20 30 40 50 60 80 100 120
2
NC — — — 23 28 37 42 48
CFM per Ft. 30 45 60 75 90 120 150 180
3
NC — — — 25 31 39 44 50
CFM per Ft. 40 60 80 100 120 160 200 240
4
NC — — 20 26 30 38 45 51
CFM per Ft. 50 75 100 125 150 200 250 300
5
NC — — 21 27 32 40 45 53
CFM per Ft. 60 90 120 150 180 240 300 360
6
NC — — 22 29 33 41 46 53
CFM per Ft. 70 105 140 175 210 280 350 420
7
NC — — 23 29 34 42 47 53
CFM per Ft. 80 120 160 200 240 320 400 480
8
NC — — 23 30 34 43 48 54 B
Model 5075R • 3/4" (19) Slot
No. of
Slots SP .006 .028 .065 .110 .170 .250 .350 .465

LINEAR DIFFUSERS AND BAR GRILLES

CFM per Ft. 10 20 30 40 50 60 70 80
1
NC — — — 25 30 38 42 46
CFM per Ft. 20 40 60 80 100 120 140 160
2
NC — — 21 29 35 40 46 49
CFM per Ft. 30 60 90 120 150 180 210 240
3
NC — — 23 31 38 42 47 51
CFM per Ft. 40 80 120 160 200 240 280 320
4
NC — — 24 33 38 44 47 52
CFM per Ft. 50 100 150 200 250 300 350 400
5
NC — — 25 33 40 44 48 53
CFM per Ft. 60 120 180 240 300 360 420 480
6
NC — — 26 34 40 45 49 54
CFM per Ft. 70 140 210 280 350 420 490 560
7
NC — — 27 35 40 46 49 54
CFM - cubic feet per minute CFM per Ft. 80 160 240 320 400 480 560 640
8
SP - negative static pressure - NC — — 28 36 41 46 49 56
inches w.g.
NC - Noise Criteria (values) based Model 5010R • 1" (25) Slot
on 10 dB room absorption, No. of
re 10 -12 watts. Slots SP .020 .045 .070 .110 .165 .215 .291 .471
CFM per Ft. 20 30 40 50 60 70 80 100
1
NC — — — 25 30 34 38 45
Performance Notes: CFM per Ft. 40 60 80 100 120 140 160 200
1. NC values are based on a 10 ft. 2
NC — — 22 28 33 36 40 48
active section. For other lengths, use CFM per Ft. 60 90 120 150 180 210 240 300
the correction factor table below. 3
NC — — 24 30 35 38 43 50
2. Data derived from tests conducted CFM per Ft. 80 120 160 200 240 280 320 400
4
in accordance with ANSI/ASHRAE NC — — 25 31 35 40 45 51
Standard 70–2006. CFM per Ft. 100 150 200 250 300 350 400 500
5
NC — — 25 32 37 41 45 51
CFM per Ft. 120 180 240 300 360 420 480 600
6
NC Correction Factors for Various NC — — 27 33 38 42 47 53
Lengths CFM per Ft. 140 210 280 350 420 490 560 700
7
NC — 20 28 34 40 42 48 53
Length (ft.) 2 4 6 8 9 10 15 20 25 30 CFM per Ft. 160 240 320 400 480 560 640 800
8
Correction -8 -5 -4 -2 -1 0 +2 +3 +4 +5 NC — 20 28 34 40 43 48 54

Previous View Home Contents Dimensions Specification Performance B19

 LINEAR SLOT DIFFUSERS • PLENUMS

LINEAR SLOT DIFFUSER

PLENUMS
• ADAPTORS FOR MODEL
SERIES 5000 LINEAR SLOT
CEILING DIFFUSERS

Standard Models:
5350(I) 1/2" (13) Slot
5375(I) 3/4" (19) Slot
5310(I) 1" (25) Slot
Modified Performance Models:
5350(I)MP 1/2" (13) Slot
5375(I)MP 3/4" (19) Slot
B 5310(I)MP 1" (25) Slot
Model Series 5300
• Suffix 'I' adds internal insulation

The Nailor Series 5300 Diffuser Plenums are designed specifically to fit the Series 5000 'Ice Tong' Linear Slot
LINEAR DIFFUSERS AND BAR GRILLES

Diffusers.
They have been designed for flexible duct connection with a model to suit each of the various frame/sub-frame 5000 Series
combinations available. For drywall ceiling mounted applications the plenums are installed separately. Unless there is
access to the ceiling space, the plenum is intended to be installed during the drywall installation. Most applications of this
type utilize concealed mounting straps on the 5000 Series. The plenums may be supplied with a hemmed leg into which
the mounting straps snap or they locate in extrusion slots on sub-frames as the linear is drawn up to the plenum from below
the ceiling.
The Series 5300 Plenums save on-site fabrication and field labor. When room lay-out changes occur, the plenums can be
simply relocated to satisfy the re-arrangement of air distribution requirements.
The Series 5300 Plenums maximize the Series 5000's performance. The airflow discharge maintains a horizontal pattern
that is close and tight to the ceiling throughout the full range of cataloged air volumes. Excellent for variable air volume
applications.
The Series 5300MP Modified Performance Plenums are fabricated in a similar manner to the Series 5300 with the addition
of internal sloping baffles for reduced throw and increased spread of the air pattern.

FEATURES:
• Standard nominal lengths are 20", • Easily installed with flexible duct. • ID Inlet dampers are available.
24", 30", 36", 48" and 60" (500, 600, • End caps can be folded up to allow • EX External Foil Back insulation.
750, 900, 1200 and 1500 mm). continuous runs with the plenums. Material: Corrosion-resistant steel.
• Widths available to fit Model Series Options:
5000 and 5000R with 1, 2, 3 or 4 • Optional internal insulation. Model
slots. Series 5300I and 5300IMP.

DIFFUSER
5300MP
INTEGRAL BAFFLES
REDUCE THROW ISOVEL
AND INCREASE Vt = 50 fpm
SPREAD FOR
IMPROVED COMFORT THROW
IN SHORT-THROW
APPLICATIONS.

5300
SPREAD

B20 Previous View Home Contents Dimensions Specification Performance

LINEAR SLOT DIFFUSERS • PLENUMS

Dimensional Data
Model Series 5300 and 5300MP Plenums for Series 5000 and 5000R Linear Slot Diffusers

Hemmed Leg Straight Leg

W W 1 1/4" NOMINAL LENGTH
(32)

D - 1/8" (3)
11"
(279)

1 1/2" (38)

Frame Types:
1/4" (6)
Frame Types:
OPTIONAL 5300MP OPTIONAL INTERNAL
INSULATION
B
MODIFIED PLENUM
C, D, N A, B, E, F, FL, G, H, M and T

Nominal Length (N) Standard Nominal Inlets (D) NOMINAL LENGTH - 3/8" (10)
inches mm inches mm EXCEPT FRAME T WHICH IS
NOM. - 1" (25)

LINEAR DIFFUSERS AND BAR GRILLES

20 508
24 610
4, 5, 6, 8, 10 102, 127, 152, 203, 254
30 762
36 914
48 1219
6, 8, 10, 12 152, 203, 254, 305
60 1524 MITERED END CAP (M)
Inlets 4" thru’ 8" are round and 10" thru’ 12" are flat oval. OR FLANGED END CAP (F)

Plenum Width (W) For Various Frame Types NOMINAL LENGTH - 3/8" (10)
No.
Model of Imperial Units (inches) Metric Units (mm)
Slots A,B,FL,M,T C,D,F,H,N E G A,B,FL,M,T C,D,F,H,N E G
5350 1 1/2 2 2 1/4 2 1/2 38 51 57 64
5375 1 1 3/4 2 1/4 2 1/2 2 3/4 44 57 64 70
5310 2 2 1/2 2 3/4 3 51 64 70 76
5350 2 3/4 3 1/4 3 1/2 3 3/4 70 83 89 95 NOMINAL LENGTH + 1/8" (3)
5375 2 3 1/4 3 3/4 4 4 1/4 83 95 102 108 OPEN END (O)
5310 3 3/4 4 1/4 4 1/2 4 3/4 95 108 114 121
5350 4 4 1/2 4 3/4 5 102 114 114 127
5375 3 4 3/4 5 1/4 5 1/2 5 3/4 121 133 140 146 NOMINAL LENGTH - 3/8" (10)
5310 5 1/2 6 6 1/4 6 1/2 140 152 159 165
5350 5 1/4 5 3/4 6 6 1/4 133 146 152 159
5375 4 6 1/4 6 3/4 7 7 1/4 159 171 178 184
5310 7 1/4 7 3/4 8 8 1/4 184 197 203 210

NOMINAL LENGTH EXCEPT

FRAME T WHICH IS NOM. - 3/8" (10)
FLAT END CAP (C)

NOMINAL LENGTH - 3/8" (10)

PLENUM END
CAP CAN BE TURNED UP

CONTINUOUS RUN

Previous View Home Contents Dimensions Specification Performance B21

 LINEAR SLOT DIFFUSERS • PLENUMS

HOW TO SPECIFY OR TO ORDER

(Show complete Model Number and Size, unless "Default" is desired).

Linear Slot Diffuser Plenums – Model Series 5300

5375 - 48" x 2 Slot - 8 - C - —
MODEL SERIES OPTIONS
- Standard Plenum 5300 - None (default) —
- Modified Performance Plenum 5300MP - Inlet Damper ID
- External Foil Back Insulation EX
SLOT WIDTH / OPTIONAL INSULATION
- 1/2" (13) 50 LINEAR SLOT DIFFUSER
- 3/4" (19) 75 5000 SERIES FRAME OR
- 1" (25) 10 FRAME/SUB-FRAME
COMBINATION
- 1/2" (13) Internal Insulation 50I - A, B, C, D, E, F, G, H, M, N,
- 3/4" (19) Internal Insulation 75I
B - 1" (25) Internal Insulation 10I
T or FL

PLENUM INLET SIZE

NOM. LENGTH
Imperial Sizes - 4" (102) Round 4
- 20, 24, 30, 36, 48, 60 - 5" (127) Round 5
LINEAR DIFFUSERS AND BAR GRILLES

(508, 610, 762, 914, 1219, 1524) - 6" (152) Round 6

- 7" (178) Round 7
Metric Sizes - 8" (203) Round 8
- 500, 600, 750, 900, 1200, 1500
- 10" (254) Oval 10
NO. OF SLOTS - 12" (305) Oval 12
- 1 thru 4

Notes:
1. Plenums are shipped loose as standard for field installation.
2. Plenums for frame/sub-frame types A, B, E, F, G, H, M, T and FL are for direct attachment to diffuser neck or sub-frame.
3. Plenums for frame types (C, D and N) are hemmed for field attachment by use of concealed mounting straps.
4. End caps of plenums can be turned up for use on continuous runs.
5. For lay-in T-Bar installations, specify nominal T-Bar opening length.

SUGGESTED SPECIFICATION:
Models 5310, 5375, 5350
Specification Text File
Furnish and install Nailor Model (select one) 5310/5310I (1" (25) slot), 5375/5375I (3/4" (19) slot), or 5350/5350I (1/2" (13)
slot) Plenums for Linear Slot Diffusers of the sizes and capacities as shown on the plans and air distribution schedules. The
plenums shall be manufactured from corrosion-resistant steel and shall include a side inlet for connection to the duct. The width
shall fit a 1, 2, 3, or 4 slot linear as specified and the length shall be in standard nominal lengths of 20", 24", 30", 36", 48" and
60" (508, 610, 762, 914, 1219 and 1524 mm). When continuous sections are required, the end caps shall be folded up for
uninterrupted airflow. Models 5310I, 5375I and 5350I shall have internal insulation.
The manufacturer shall provide published performance data for the linear slot diffuser plenums, which shall be tested in
accordance with ANSI/ASHRAE Standard 70 – 2006.
Specification Text File
Models 5310MP, 5375MP, 5350MP
Furnish and install Nailor Model (select one) 5310MP/5310MPI (1" (25) slot), 5375MP/5375MPI (3/4" (19) slot), or
5350MP/5350MPI (1/2" (13) slot) Modified Performance Plenums for Linear Slot Diffusers of the sizes and capacities as
shown on the plans and air distribution schedules. The plenums shall be manufactured from corrosion-resistant steel and shall
include a side inlet for connection to the duct. The width shall fit a 1, 2, 3, or 4 slot linear as specified and the length shall be
in standard nominal lengths of 20", 24", 30", 36", 48" and 60" (508, 610, 762, 914, 1219 and 1524 mm). When continuous
sections are required, the end caps shall be folded up for uninterrupted airflow. Models 5310MPI, 5375MPI and 5350MPI shall
have internal insulation.
The manufacturer shall provide published performance data for the linear slot diffuser plenums, which shall be tested in
accordance with ANSI/ASHRAE Standard 70 – 2006.

B22 Previous View Home Contents Dimensions Specification Performance

LINEAR SLOT DIFFUSERS • PLENUMS

Performance Data
Model 5350(I) • 1/2" (13) Slot Width
1 Slot • 24" (610) Long
Airflow, CFM 20 30 40 50 60 70 80 90
6" TP .017 .038 .068 .107 .154 .209 .273 .346
Round NC — 17 23 29 33 37 41 43
Inlet T 1-1-6 1-3-7 3-6-9 4-7-9 5-7-10 6-7-10 7-8-12 7-9-13

1 Slot • 48" (1219) Long

Airflow, CFM 35 50 65 80 95 110 125 140
6" TP .013 .027 .045 .068 .096 .129 .167 .209
Round NC — 19 25 30 34 37 40 43
Inlet T 1-2-7 2-3-9 2-5-10 4-8-12 6-9-13 7-10-14 7-10-15 7-11-15

Airflow, CFM 50 65 80 95 110 125 140 155

8" TP .030 .051 .077 .109 .146 .188 .236 .290
Round NC 15 21 26 30 33 36 39 42
Inlet T 2-3-9 2-5-10 4-8-12 6-9-13 7-10-14 7-10-15 7-11-15 8-11-16
B
1 Slot • 60" (1524) Long
Airflow, CFM 50 65 80 95 110 125 140 155
6" TP .025 .043 .064 .091 .122 .157 .198 .242
Round

LINEAR DIFFUSERS AND BAR GRILLES

NC — 20 26 30 34 37 40 42
Inlet T 1-3-8 1-4-9 2-4-10 3-6-11 4-8-12 6-10-13 7-10-14 8-11-16

Airflow, CFM 50 65 80 95 110 125 140 155

8" TP .028 .048 .073 .102 .137 .177 .222 .272
Round NC — 17 22 26 30 34 37 39
Inlet T 1-3-8 1-4-9 2-4-10 3-6-11 4-8-12 6-10-13 7-10-14 8-11-16

Performance Notes – see page B24.

Previous View Home Contents Dimensions Specification Performance B23

 LINEAR SLOT DIFFUSERS • PLENUMS

Performance Data
Model 5350(I) • 1/2" (13) Slot Width
2 Slot • 24" (610) Long
Airflow, CFM 35 50 65 80 95 110 125 140
6" TP .021 .042 .072 .108 .153 .205 .265 .332
Round NC — 18 24 29 34 37 40 43
Inlet T 1-3-7 2-5-8 3-7-9 5-8-11 6-8-12 7-9-13 8-10-14 8-10-15

2 Slot • 48" (1219) Long

Airflow, CFM 60 80 100 120 140 160 180 200
6" TP .025 .045 .070 .101 .137 .179 .227 .280
Round NC — 19 24 28 32 36 38 41
Inlet T 1-3-9 2-4-11 3-6-12 4-8-13 5-9-14 6-10-15 7-11-16 8-13-17

Airflow, CFM 80 100 120 140 160 180 200 220

8" TP .029 .046 .066 .089 .117 .148 .183 .221
Round NC 17 21 25 29 32 35 38 40
Inlet
B T 2-4-11 3-6-12 4-8-13 5-9-14 6-10-15 7-11-16 8-13-17 9-13-19

Airflow, CFM 100 120 140 160 180 200 220 240
10" TP .054 .077 .105 .137 .174 .214 .259 .309
Oval NC 18 22 26 29 32 35 37 39
Inlet T 3-6-12 4-8-13 5-9-14 6-10-15 7-11-16 8-13-17 9-13-19 10-14-20
LINEAR DIFFUSERS AND BAR GRILLES

2 Slot • 60" (1524) Long

Airflow, CFM 120 140 160 180 200 220 240 260
8" TP .071 .097 .126 .160 .198 .239 .284 .334
Round NC 21 25 28 31 24 36 38 40
Inlet T 2-5-10 4-7-12 4-8-13 5-9-14 6-10-15 7-11-16 7-12-16 8-13-17

Airflow, CFM 140 160 180 200 220 240 260 280
10" TP .065 .085 .107 .133 .161 .191 .224 .260
Oval NC 22 25 28 31 33 35 37 39
Inlet T 4-7-12 4-8-13 5-9-14 6-10-15 7-11-16 7-12-16 8-13-17 8-13-19

CFM - cubic feet per minute Performance Notes: Ak Factor

Number per foot
TP - total pressure - inches w.g. 1. Throws are given at 150, 100 and of Slots
50 fpm terminal velocities under Supply Return
T - throw in feet 1 .018 .033
isothermal conditions.
NC - Noise Criteria (values) based on 2 .035 .066
10 dB room absorption, re 10 -12 2. Cataloged throws are for a one-way 3 .053 .099
watts. horizontal air pattern. For divided 4 .070 .132
airflow, deduce the airflow in each
direction according to the number of
slots, with the total airflow
apportioned between the slots. Look
up throw for the airflow in each
direction according to the number of
slots in that direction.
3. Performance data is based upon the
standard 5300 Series Model.
The 5300MP Modified Performance
Series reduces the tabulated throw
values by approximately 25%.
Horizontal spread values are
approximately 150% of the horizontal
throw (T) projection values.
4. Dash ( — ) in space indicates an NC
level of less than 15.
5. Data derived from tests conducted
in accordance with ANSI/ASHRAE
Standard 70 – 2006.

B24 Previous View Home Contents Dimensions Specification Performance

LINEAR SLOT DIFFUSERS • PLENUMS

Performance Data
Model 5375(I) • 3/4" (19) Slot Width
1 Slot • 24" (610) Long
Airflow, CFM 20 30 40 50 60 70 80 90
6" TP .014 .031 .055 .085 .123 .168 .219 .277
Round NC — 15 21 27 31 35 38 41
Inlet T 1-2-4 1-3-6 2-4-7 3-6-9 5-7-10 6-7-10 7-8-11 7-9-12

Airflow, CFM 30 40 50 60 70 80 90 100

8" TP .038 .068 .107 .154 .209 .273 .346 .427
Round NC — 19 24 28 32 34 37 40
Inlet T 1-3-6 2-4-7 3-6-9 5-7-10 6-7-10 7-8-11 7-9-12 8-10-13

Airflow, CFM 40 50 60 70 80 90 100 110

10" TP .088 .137 .198 .269 .351 .444 .549 .664
Oval NC — 19 24 28 31 34 37 39
Inlet T 2-4-7 3-6-9 5-7-10 6-7-10 7-8-11 7-9-12 8-10-13 8-10-14

1 Slot • 48" (1219) Long

Airflow, CFM 35 50 65 80 95 110 125 140
B
6" TP .012 .024 .040 .061 .086 .115 .149 .187
Round NC — 18 23 28 31 34 37 40
Inlet T 1-2-4 2-4-7 3-5-8 4-6-11 5-7-12 6-9-13 6-10-13 7-11-14

LINEAR DIFFUSERS AND BAR GRILLES

Airflow, CFM 50 65 80 95 110 125 140 155
8" TP .020 .034 .052 .073 .098 .127 .159 .195
Round NC — 19 24 28 31 33 36 39
Inlet T 2-4-7 3-5-8 4-6-11 5-7-12 6-9-13 6-10-13 7-11-14 7-11-15

Airflow, CFM 65 80 95 110 125 140 155 170

10" TP .038 .058 .081 .109 .141 .177 .217 .261
Oval NC 16 21 25 29 32 34 36 39
Inlet T 3-5-8 4-6-11 5-7-12 6-9-13 6-10-13 7-11-14 7-11-15 8-12-16

Airflow, CFM 80 95 110 125 140 155 170 185

12" TP .064 .091 .122 .157 .198 .242 .291 .345
Oval NC 17 21 24 27 30 32 35 37
Inlet T 4-6-11 5-7-12 6-9-13 6-10-13 7-11-14 7-11-15 8-12-16 8-13-18

1 Slot • 60" (1524) Long

Airflow, CFM 80 95 110 125 140 155 170 185
8" TP .039 .055 .074 .095 .119 .146 .176 .209
Round NC 20 24 28 31 34 37 38 40
Inlet T 3-5-8 4-6-10 5-7-11 5-8-12 6-9-14 7-10-15 7-11-16 8-12-17

Airflow, CFM 95 110 125 140 155 170 185 200

10" TP .050 .068 .087 .110 .134 .162 .191 .224
Oval NC 22 25 28 31 33 35 37 39
Inlet T 4-6-10 5-7-11 5-8-12 6-9-14 7-10-15 7-11-16 8-12-17 8-13-18

Airflow, CFM 110 125 140 155 170 185 200 215
12" TP .077 .100 .125 .153 .184 .218 .255 .295
Oval NC 22 25 27 30 32 34 37 38
Inlet T 5-7-11 5-8-12 6-9-14 7-10-15 7-11-16 8-12-17 8-13-18 9-14-19

Performance Notes – see page B28.

Previous View Home Contents Dimensions Specification Performance B25

 LINEAR SLOT DIFFUSERS • PLENUMS

Performance Data
Model 5375(I) • 3/4" (19) Slot Width
2 Slot • 24" (610) Long
Airflow, CFM 50 65 80 95 110 125 140 155
6" TP .027 .045 .068 .096 .129 .167 .209 .257
Round NC 17 22 27 31 35 38 41 44
Inlet T 1-3-8 2-5-9 3-7-10 5-9-12 6-9-13 7-10-14 8-10-15 8-11-17

Airflow, CFM 65 80 95 110 125 140 155 170

8" TP .036 .055 .077 .103 .134 .168 .205 .247
Round NC 19 24 28 31 34 37 40 43
Inlet T 2-5-9 3-7-10 5-9-12 6-9-13 7-10-14 8-10-15 8-11-17 9-11-19

Airflow, CFM 80 95 110 125 140 155 170 185

10" TP .061 .086 .115 .149 .187 .229 .275 .326
Oval NC 18 24 28 32 35 38 41 43
Inlet T 3-7-10 5-9-12 6-9-13 7-10-14 8-10-15 8-11-17 9-11-19 10-12-20

2 Slot • 48" (1219) Long

B 6"
Airflow, CFM
TP
60
.022
80
.039
100
.061
120
.088
140
.119
160
.156
180
.198
200
.244
Round NC — 17 22 26 30 33 36 39
Inlet T 1-4-10 2-5-12 2-6-13 3-6-13 4-7-14 4-10-14 5-11-16 6-12-17

Airflow, CFM 80 100 120 140 160 180 200 220

8" TP .022 .034 .049 .067 .088 .111 .137 .166
LINEAR DIFFUSERS AND BAR GRILLES

Round NC — 18 22 26 30 33 36 39
Inlet T 2-5-12 2-6-13 3-6-13 4-7-14 4-10-14 5-11-16 6-12-17 7-13-18

Airflow, CFM 100 120 140 160 180 200 220 240
10" TP .025 .036 .049 .064 .082 .101 .122 .145
Oval NC 16 20 24 27 30 33 36 38
Inlet T 2-6-13 3-6-13 4-7-14 4-10-14 5-11-16 6-12-17 7-13-18 8-14-20

Airflow, CFM 120 140 160 180 200 220 240 260
12" TP .038 .052 .068 .087 .107 .129 .154 .180
Oval NC 16 19 22 27 30 33 36 38
Inlet T 3-6-13 4-7-14 4-10-14 5-11-16 6-12-17 7-13-18 8-14-20 9-15-21

2 Slot • 60" (1524) Long

Airflow, CFM 140 160 180 200 220 240 260 280
8" TP .054 .070 .089 .110 .133 .158 .186 .216
Round NC 23 26 29 31 34 36 38 40
Inlet T 2-6-13 3-7-14 5-8-15 5-8-16 6-9-17 6-10-18 7-11-19 8-13-20

Airflow, CFM 160 180 200 220 240 260 280 300
10" TP .049 .063 .077 .093 .111 .130 .151 .174
Oval NC 23 26 28 31 33 35 37 39
Inlet T 3-7-14 5-8-15 5-8-16 6-9-17 6-10-18 7-11-19 8-13-20 8-15-21

Airflow, CFM 180 200 220 240 260 280 300 320
12" TP .044 .055 .066 .079 .092 .107 .123 .140
Oval NC 22 25 27 29 31 33 35 37
Inlet T 5-8-15 5-8-16 6-9-17 6-10-18 7-11-19 8-13-20 8-15-21 9-16-22

Performance Notes – see page B28.

B26 Previous View Home Contents Dimensions Specification Performance

LINEAR SLOT DIFFUSERS • PLENUMS

Performance Data
Model 5375(I) • 3/4" (19) Slot Width
3 Slot • 24" (610) Long
Airflow, CFM 60 80 100 120 140 160 180 200
6" TP .026 .047 .073 .106 .144 .188 .238 .294
Round NC 15 21 27 31 35 38 41 44
Inlet T 2-5-10 3-6-11 4-7-12 5-8-13 6-9-16 7-10-18 9-12-20 10-13-21

Airflow, CFM 80 100 120 140 160 180 200 220

8" TP .030 .047 .068 .093 .122 .154 .190 .230
Round NC 17 22 27 31 34 37 39 41
Inlet T 3-6-11 4-7-12 5-8-13 6-9-16 7-10-18 9-12-20 10-13-21 10-14-22

Airflow, CFM 100 120 140 160 180 200 220 240
10" TP .049 .071 .097 .126 .160 .198 .239 .284
Oval NC 20 24 28 31 34 36 38 40
Inlet T 4-7-12 5-8-13 6-9-16 7-10-18 9-12-20 10-13-21 10-14-22 11-14-23

3 Slot • 48" (1219) Long

6"
Airflow, CFM
TP
125
.074
150
.107
175
.145
200
.190
225
.240
250
.297
275
.359
300
.427
B
Round NC 21 25 29 33 36 38 40 42
Inlet T 2-6-14 3-7-15 5-9-16 6-10-17 6-11-18 7-12-19 7-13-20 8-14-21

Airflow, CFM 150 175 200 225 250 275 300 325
8" TP .057 .077 .101 .128 .157 .191 .227 .266

LINEAR DIFFUSERS AND BAR GRILLES

Round NC 21 25 28 31 34 36 38 40
Inlet T 3-7-15 5-9-16 6-10-17 6-11-18 7-12-19 7-13-20 8-14-21 9-15-23

Airflow, CFM 175 200 225 250 275 300 325 350
10" TP .051 .067 .085 .104 .126 .150 .176 .204
Oval NC 23 26 28 31 33 35 37 39
Inlet T 5-9-16 6-10-17 6-11-18 7-12-19 7-13-20 8-14-21 9-15-23 10-16-25

Airflow, CFM 200 225 250 275 300 325 350 375
12" TP .041 .052 .064 .077 .092 .108 .125 .143
Oval NC 21 24 27 29 31 33 35 39
Inlet T 6-10-17 6-11-18 7-12-19 7-13-20 8-14-21 9-15-23 10-16-25 11-17-27

3 Slot • 60" (1524) Long

Airflow, CFM 180 210 240 270 300 330 360 390
8" TP .069 .094 .123 .156 .192 .233 .277 .325
Round NC 22 26 29 32 35 37 39 41
Inlet T 3-8-15 5-10-16 6-11-18 7-12-19 7-13-20 8-14-21 8-15-22 9-16-23

Airflow, CFM 210 240 270 300 330 360 390 420
10" TP .064 .084 .106 .131 .159 .189 .222 .257
Oval NC 24 27 29 32 34 36 38 40
Inlet T 5-10-16 6-11-18 7-12-19 7-13-20 8-14-21 8-15-22 9-16-23 9-17-24

Airflow, CFM 240 270 300 330 360 390 420 450
12" TP .049 .063 .077 .093 .111 .130 .151 .174
Oval NC 23 25 28 30 32 34 36 38
Inlet T 6-11-18 7-12-19 7-13-20 8-14-21 8-15-22 9-16-23 9-17-24 10-17-25

Performance Notes – see page B28.

Previous View Home Contents Dimensions Specification Performance B27

 LINEAR SLOT DIFFUSERS • PLENUMS

Performance Data
Model 5375(I) • 3/4" (19) Slot Width
4 Slot • 24" (610) Long
Airflow, CFM 75 100 125 150 175 200 225 250
6" TP .033 .058 .091 .131 .179 .233 .295 .365
Round NC 17 22 28 32 36 39 42 45
Inlet T 2-6-11 3-7-13 5-8-14 7-10-15 8-11-17 9-12-20 9-13-21 10-14-23

Airflow, CFM 100 125 150 175 200 225 250 275
8" TP .031 .049 .070 .095 .124 .157 .194 .235
Round NC 18 23 27 32 35 38 40 42
Inlet T 3-7-13 5-8-14 7-10-15 8-11-17 9-12-20 9-13-21 10-14-23 11-16-24

Airflow, CFM 125 150 175 200 225 250 275 300
10" TP .042 .060 .082 .107 .135 .167 .202 .240
Oval NC 22 25 28 32 35 37 39 41
Inlet T 5-8-14 7-10-15 8-11-17 9-12-20 9-13-21 10-14-23 11-16-24 13-19-26

4 Slot • 48" (1219) Long

B 6"
Airflow, CFM
TP
160
.074
190
.159
220
.213
250
.275
280
.345
310
.422
340
.508
370
.602
Round NC 23 27 30 33 35 38 40 42
Inlet T 3-8-15 4-10-16 5-12-18 6-13-20 7-14-21 9-15-22 10-16-24 11-17-26

Airflow, CFM 190 220 250 280 310 340 370 400
8" TP .071 .096 .124 .155 .190 .229 .271 .317
LINEAR DIFFUSERS AND BAR GRILLES

Round NC 23 26 29 32 34 37 39 41
Inlet T 4-10-16 5-12-18 6-13-20 7-14-21 9-15-22 10-16-24 11-17-26 12-17-28

Airflow, CFM 220 250 280 310 340 370 400 430
10" TP .064 .082 .103 .126 .152 .180 .210 .243
Oval NC 23 26 29 32 34 36 38 40
Inlet T 5-12-18 6-13-20 7-14-21 9-15-22 10-16-24 11-17-26 12-17-28 12-18-29

Airflow, CFM 250 280 310 340 370 400 430 460
12" TP .046 .057 .070 .084 .100 .117 .135 .155
Oval NC 22 25 28 30 32 34 36 38
Inlet T 6-13-20 7-14-21 9-15-22 10-16-24 11-17-26 12-17-28 12-18-29 13-19-30

4 Slot • 60" (1524) Long

Airflow, CFM 220 260 300 340 380 420 460 500
8" TP .089 .124 .165 .212 .265 .324 .389 .459
Round NC 23 27 30 33 36 38 40 42
Inlet T 3-10-16 4-11-18 6-12-20 8-13-22 10-15-24 11-16-26 12-17-28 13-19-31

Airflow, CFM 260 300 340 380 420 460 500 540
10" TP .077 .103 .132 .165 .201 .242 .285 .333
Oval NC 24 27 30 33 36 38 40 42
Inlet T 4-11-18 6-12-20 8-13-22 10-15-24 11-16-26 12-17-28 13-19-31 14-20-32

Airflow, CFM 300 340 380 420 460 500 540 580
12" TP .053 .068 .085 .104 .124 .147 .171 .198
Oval NC 23 26 29 31 34 36 38 40
Inlet T 6-12-20 8-13-22 10-15-24 11-16-26 12-17-28 13-19-31 14-20-32 14-21-34
CFM -cubic feet per minute airflow, deduce the airflow in each 4. Dash ( — ) in space indicates an NC
TP -total pressure - inches w.g. direction according to the number of level of less than 15.
slots, with the total airflow apportioned 5. Data derived from tests conducted in
T -throw in feet between the slots. Look up throw for the accordance with ANSI/ASHRAE
NC -Noise Criteria (values) based on airflow in each direction according to the Standard 70 – 2006.
10 dB room absorption, re 10 -12 number of slots in that direction.
watts. 3. Performance data is based upon the Ak Factor
Number per foot
Performance Notes: standard 5300 Series Model.
of Slots
The 5300MP Modified Performance Supply Return
1. Throws are given at 150, 100 and 50 Series reduces the tabulated throw 1 .024 .039
fpm terminal velocities under isothermal values by approximately 25%. 2 .049 .078
conditions. Horizontal spread values are 3 .073 .117
2. Cataloged throws are for a one-way approximately 150% of the horizontal 4 .098 .156
horizontal air pattern. For divided throw (T) projection values.

B28 Previous View Home Contents Dimensions Specification Performance

LINEAR SLOT DIFFUSERS • PLENUMS

Performance Data
Model 5310(I) • 1" (25) Slot Width
1 Slot • 24" (610) Long
Airflow, CFM 20 30 40 50 60 70 80 90
6" TP .008 .018 .032 .049 .071 .097 .126 .160
Round NC — — 19 25 29 33 36 39
Inlet T 1-2-4 2-3-5 2-4-6 3-5-7 4-6-8 4-6-9 5-6-9 5-7-10

Airflow, CFM 30 40 50 60 70 80 90 100

8" TP .023 .041 .064 .092 .125 .163 .207 .255
Round NC — — 19 25 29 32 34 37
Inlet T 2-3-5 2-4-6 3-5-7 4-6-8 4-6-9 5-6-9 5-7-10 6-7-10

Airflow, CFM 40 50 60 70 80 90 100 110

10" TP .049 .077 .111 .151 .198 .250 .309 .373
Oval NC — 17 22 26 29 31 34 37
Inlet T 2-4-6 3-5-7 4-6-8 4-6-9 5-6-9 5-7-10 6-7-10 6-7-10

1 Slot • 48" (1219) Long

6"
Airflow, CFM
TP
50
.019
65
.033
80
.049
95
.070
110
.093
125
.121
140
.151
155
.185
B
Round NC 16 20 25 28 32 35 38 40
Inlet T 1-2-5 1-3-7 1-3-9 2-4-10 2-5-10 3-5-11 3-6-12 4-7-12

Airflow, CFM 65 80 95 110 125 140 155 170

8"

LINEAR DIFFUSERS AND BAR GRILLES

TP .022 .033 .046 .062 .080 .101 .124 .149
Round NC 17 21 25 28 31 34 36 39
Inlet T 1-3-7 1-3-9 2-4-10 2-5-10 3-5-11 3-6-12 4-7-12 5-8-13

Airflow, CFM 80 95 110 125 140 155 170 185

10" TP .036 .050 .068 .087 .110 .134 .162 .191
Oval NC 18 22 26 29 32 34 36 38
Inlet T 1-3-9 2-4-10 2-5-10 3-5-11 3-6-12 4-7-12 5-8-13 6-9-14

Airflow, CFM 95 110 125 140 155 170 185 200

12" TP .055 .074 .095 .119 .146 .176 .209 .244
Oval NC 18 21 24 27 30 33 35 37
Inlet T 2-4-10 2-5-10 3-5-11 3-6-12 4-7-12 5-8-13 6-9-14 7-10-15

1 Slot • 60" (1524) Long

Airflow, CFM 80 95 110 125 140 155 170 185
8" TP .026 .037 .049 .064 .080 .098 .118 .140
Round NC 18 22 26 29 32 34 36 38
Inlet T 1-3-7 1-3-9 2-4-9 3-5-10 3-5-11 4-6-11 5-7-12 6-8-13

Airflow, CFM 95 110 125 140 155 170 185 200

10" TP .031 .041 .054 .067 .082 .099 .117 .137
Oval NC 18 22 26 28 31 33 35 37
Inlet T 1-3-9 2-4-9 3-5-10 3-5-11 4-6-11 5-7-12 6-8-13 6-9-14

Airflow, CFM 110 125 140 155 170 185 200 215
12" TP .040 .052 .065 .080 .096 .114 .133 .153
Oval NC 19 22 24 28 30 32 34 36
Inlet T 2-4-9 3-5-10 3-5-11 4-6-11 5-7-12 6-8-13 6-9-14 7-10-15

Performance Notes – see page B32.

Previous View Home Contents Dimensions Specification Performance B29

 LINEAR SLOT DIFFUSERS • PLENUMS

Performance Data
Model 5310(I) • 1" (25) Slot Width
2 Slot • 24" (610) Long
Airflow, CFM 50 65 80 95 110 125 140 155
6" TP .020 .034 .052 .073 .098 .127 .159 .195
Round NC — 19 25 29 33 36 39 42
Inlet T 2-4-7 2-5-8 4-6-9 5-6-10 6-7-10 6-8-12 7-8-14 7-9-15

Airflow, CFM 65 80 95 110 125 140 155 170

8" TP .026 .039 .055 .074 .095 .119 .146 .176
Round NC 18 22 25 29 32 35 38 41
Inlet T 2-5-8 4-6-9 5-6-10 6-7-10 6-8-12 7-8-14 7-9-15 8-10-15

Airflow, CFM 80 95 110 125 140 155 170 185

10" TP .043 .060 .081 .104 .131 .160 .193 .229
Oval NC 18 22 26 29 32 35 38 40
Inlet T 4-6-9 5-6-10 6-7-10 6-8-12 7-8-14 7-9-15 8-10-15 8-10-16

2 Slot • 48" (1219) Long

B 6"
Airflow, CFM
TP
100
.054
120
.077
140
.105
160
.137
180
.174
200
.214
220
.259
240
.309
Round NC 20 24 28 31 34 37 39 41
Inlet T 1-4-8 2-6-9 4-7-12 5-8-13 6-9-14 6-10-14 7-11-15 8-12-17

Airflow, CFM 120 140 160 180 200 220 240 260
8" TP .041 .056 .073 .092 .113 .137 .163 .192
LINEAR DIFFUSERS AND BAR GRILLES

Round NC 20 24 27 30 33 35 37 39
Inlet T 2-6-9 4-7-12 5-8-13 6-9-14 6-10-14 7-11-15 8-12-17 8-12-17

Airflow, CFM 140 160 180 200 220 240 260 280
10" TP .038 .049 .063 .077 .093 .111 .130 .151
Oval NC 21 24 27 30 32 34 36 38
Inlet T 4-7-12 5-8-13 6-9-14 6-10-14 7-11-15 8-12-17 8-12-17 9-13-19

Airflow, CFM 160 180 200 220 240 260 280 300
12" TP .032 .040 .049 .060 .071 .083 .097 .111
Oval NC 20 24 26 28 30 32 34 36
Inlet T 5-8-13 6-9-14 6-10-14 7-11-15 8-12-17 8-12-17 9-13-19 9-13-21

2 Slot • 60" (1524) Long

Airflow, CFM 160 180 200 220 240 260 280 300
8" TP .059 .075 .093 .112 .133 .157 .182 .209
Round NC 24 27 29 31 33 35 37 39
Inlet T 3-6-10 4-7-12 6-9-14 7-9-15 7-10-16 8-11-17 8-12-18 9-13-19

Airflow, CFM 180 200 220 240 260 280 300 320
10" TP .052 .064 .077 .092 .108 .125 .143 .163
Oval NC 24 26 28 31 33 35 37 39
Inlet T 4-7-12 6-9-14 7-9-15 7-10-16 8-11-17 8-12-18 9-13-19 9-14-21

Airflow, CFM 200 220 240 260 280 300 320 340
12" TP .045 .054 .064 .076 .088 .101 .115 .129
Oval NC 23 26 28 30 32 34 36 38
Inlet T 6-9-14 7-9-15 7-10-16 8-11-17 8-12-18 9-13-19 9-14-21 10-15-22

Performance Notes – see page B32.

B30 Previous View Home Contents Dimensions Specification Performance

LINEAR SLOT DIFFUSERS • PLENUMS

Performance Data
Model 5310(I) • 1" (25) Slot Width
3 Slot • 24" (610) Long
Airflow, CFM 60 80 100 120 140 160 180 200
6" TP .024 .043 .067 .096 .131 .171 .216 .267
Round NC — 19 24 28 32 35 38 41
Inlet T 2-4-8 3-5-9 4-6-10 5-7-11 6-8-12 7-9-14 7-10-15 8-10-16

Airflow, CFM 80 100 120 140 160 180 200 220

8" TP .022 .034 .049 .067 .088 .111 .137 .166
Round NC 15 20 25 28 31 34 37 39
Inlet T 3-5-9 4-6-10 5-7-11 6-8-12 7-9-14 7-10-15 8-10-16 8-11-17

Airflow, CFM 100 120 140 160 180 200 220 240
10" TP .029 .042 .057 .075 .095 .117 .141 .168
Oval NC 18 22 25 28 31 34 36 38
Inlet T 4-6-10 5-7-11 6-8-12 7-9-14 7-10-15 8-10-16 8-11-17 9-11-18

3 Slot • 48" (1219) Long

6"
Airflow, CFM
TP
125
.071
150
.103
175
.140
200
.183
225
.231
250
.285
275
.345
300
.411
B
Round NC 19 23 27 30 33 36 38 40
Inlet T 2-4-10 3-6-12 5-7-14 5-8-15 6-8-16 7-9-17 7-10-18 7-11-18

Airflow, CFM 150 175 200 225 250 275 300 325
8" TP .048 .065 .085 .108 .134 .162 .192 .226

LINEAR DIFFUSERS AND BAR GRILLES

Round NC 20 23 26 29 32 34 36 38
Inlet T 3-6-12 5-7-14 5-8-15 6-8-16 7-9-17 7-10-18 7-11-18 8-12-20

Airflow, CFM 175 200 225 250 275 300 325 350
10" TP .045 .058 .074 .091 .110 .131 .154 .179
Oval NC 20 23 26 28 30 32 34 36
Inlet T 5-7-14 5-8-15 6-8-16 7-9-17 7-10-18 7-11-18 8-12-20 8-13-22

Airflow, CFM 200 225 250 275 300 325 350 375
12" TP .032 .040 .049 .060 .071 .083 .097 .111
Oval NC 19 22 25 27 29 31 33 35
Inlet T 5-8-15 6-8-16 7-9-17 7-10-18 7-11-18 8-12-20 8-13-22 9-14-23

3 Slot • 60" (1524) Long

Airflow, CFM 180 210 240 270 300 330 360 390
8" TP .063 .085 .111 .141 .174 .210 .250 .293
Round NC 20 23 27 30 33 35 37 39
Inlet T 3-7-13 4-8-15 6-9-17 6-10-18 7-11-19 7-12-20 8-13-22 8-14-23

Airflow, CFM 210 240 270 300 330 360 390 420
10" TP .054 .071 .090 .111 .134 .160 .188 .218
Oval NC 22 24 27 29 32 34 36 38
Inlet T 4-8-15 6-9-17 6-10-18 7-11-19 7-12-20 8-13-22 8-14-23 9-15-24

Airflow, CFM 240 270 300 330 360 390 420 450
12" TP .036 .046 .057 .069 .082 .096 .111 .128
Oval NC 21 23 25 28 30 32 34 36
Inlet T 6-9-17 6-10-18 7-11-19 7-12-20 8-13-22 8-14-23 9-15-24 10-16-26

Performance Notes – see page B32.

Previous View Home Contents Dimensions Specification Performance B31

 LINEAR SLOT DIFFUSERS • PLENUMS

Performance Data
Model 5310(I) • 1" (25) Slot Width
4 Slot • 24" (610) Long
Airflow, CFM 75 100 125 150 175 200 225 250
6" TP .030 .054 .084 .121 .164 .214 .271 .335
Round NC 16 20 25 29 33 36 39 41
Inlet T 3-5-10 4-7-11 6-8-12 6-8-13 7-9-15 7-10-16 8-11-18 8-11-19

Airflow, CFM 100 125 150 175 200 225 250 275
8" TP .027 .042 .060 .082 .107 .135 .167 .202
Round NC 17 21 25 29 33 35 37 40
Inlet T 4-7-11 6-8-12 6-8-13 7-9-15 7-10-16 8-11-18 8-11-19 9-13-21

Airflow, CFM 125 150 175 200 225 250 275 300
10" TP .029 .041 .056 .073 .093 .115 .139 .165
Oval NC 19 23 26 30 32 35 37 39
Inlet T 6-8-12 6-8-13 7-9-15 7-10-16 8-11-18 8-11-19 9-13-21 9-14-22

4 Slot • 48" (1219) Long

B 6"
Airflow, CFM
TP
160
.104
190
.147
220
.198
250
.255
280
.320
310
.392
340
.472
370
.559
Round NC 20 24 28 31 34 36 38 40
Inlet T 3-6-14 5-7-15 6-8-16 7-10-17 7-11-18 8-12-19 8-13-20 9-14-21

Airflow, CFM 190 220 250 280 310 340 370 400
8" TP .065 .087 .112 .140 .172 .207 .245 .287
LINEAR DIFFUSERS AND BAR GRILLES

Round NC 21 24 27 30 32 34 36 38
Inlet T 5-7-15 6-8-16 7-10-17 7-11-18 8-12-19 8-13-20 9-14-21 9-14-22

Airflow, CFM 220 250 280 310 340 370 400 430
10" TP .054 .070 .088 .108 .129 .153 .179 .207
Oval NC 21 24 27 29 31 33 35 37
Inlet T 6-8-16 7-10-17 7-11-18 8-12-19 8-13-20 9-14-21 9-14-22 10-15-24

Airflow, CFM 250 280 310 340 370 400 430 460
12" TP .039 .049 .061 .073 .086 .101 .116 .133
Oval NC 20 23 26 28 30 32 34 36
Inlet T 7-10-17 7-11-18 8-12-19 8-13-20 9-14-21 9-14-22 10-15-24 10-16-26

4 Slot • 60" (1524) Long

Airflow, CFM 220 260 300 340 380 420 460 500
8" TP .085 .118 .157 .202 .253 .309 .370 .437
Round NC 20 24 28 31 33 35 38 40
Inlet T 4-6-13 6-8-15 7-10-17 8-12-19 9-13-21 9-14-22 10-15-23 10-16-24

Airflow, CFM 260 300 340 380 420 460 500 540
10" TP .072 .095 .122 .153 .187 .224 .265 .309
Oval NC 22 25 28 31 33 35 37 39
Inlet T 6-8-15 7-10-17 8-12-19 9-13-21 9-14-22 10-15-23 10-16-24 11-18-26

Airflow, CFM 300 340 380 420 460 500 540 580
12" TP .043 .056 .070 .085 .102 .121 .141 .162
Oval NC 21 24 27 29 31 33 35 37
Inlet T 7-10-17 8-12-19 9-13-21 9-14-22 10-15-23 10-16-24 11-18-26 12-19-28
CFM -cubic feet per minute airflow, deduce the airflow in each throw (T) projection values.
TP -total pressure - inches w.g. direction according to the number of 4. Dash ( — ) in space indicates an NC
slots, with the total airflow apportioned level of less than 15.
T -throw in feet between the slots. Look up throw for the
5. Data derived from tests conducted in
NC -Noise Criteria (values) based on airflow in each direction according to the accordance with ANSI/ASHRAE
10 dB room absorption, re 10 -12 number of slots in that direction. Standard 70 – 2006.
watts. 3. Performance data is based upon the
Ak Factor
Performance Notes: standard 5300 Series Model. Number per foot
1. Throws are given at 150, 100 and 50 The 5300MP Modified Performance of Slots Supply Return
fpm terminal velocities under isothermal Series reduces the tabulated throw
1 .030 .051
conditions. values by approximately 25%.
2 .060 .104
Horizontal spread values are
2. Cataloged throws are for a one-way 3 .090 .155
approximately 150% of the horizontal
horizontal air pattern. For divided 4 .120 .206

B32 Previous View Home Contents Dimensions Specification Performance

LINEAR BAR GRILLES

LINEAR BAR GRILLES

• FIXED BARS
• ALUMINUM CONSTRUCTION

Models:
1/2" (13) Bar Spacing
49-240 • 1/4" (6) Bars • 0° Deflection • Pencil-Proof
49-241 • 1/4" (6) Bars • 15° Deflection • Pencil-Proof
49-243 • 1/4" (6) Bars • 30° Deflection • Pencil-Proof
49-280 • 1/8" (3) Bars • 0° Deflection
49-281 • 1/8" (3) Bars • 15° Deflection
1/4" (6) Bar Spacing
49-480 • 1/8" (3) Bars • 0° Deflection
B
49-481 • 1/8" (3) Bars • 15° Deflection
• Suffix '- O' adds a steel damper

LINEAR DIFFUSERS AND BAR GRILLES

Models 49-240, 49-280, 49-480

The Model Series 4900 Linear Bar Grilles have been specially designed to provide the precision quality appearance
required for architectural excellence with crisply sculptured styling, careful workmanship and effective air distribution.
The Series 4900 Linear Bar Grilles are designed for heating and cooling applications, supply and return.
The grilles are manufactured with precision mitered corners to maximize quality.

FEATURES: Options:
• Deflection bars are fixed and are • Ideal for continuous length • Heavy gauge steel opposed blade
parallel to the long dimension. applications. damper (add suffix '-O').
• Available in 7 core styles and a • Multiple sections are provided with • DV Rear directional control vanes.
variety of frame and sub-frame alignment strips on the frame and • MC Mitered Corner Sections.
options. sub-frame to provide superior,
• AD Access Doors.
• Diffusers are supplied in lengths of positive field alignment.
• BO Blank-offs.
up to 6 ft. (1829) in a single section. • End caps are staked and mitered for
a superior quality appearance. Material: Extruded Aluminum.
• Standard incremental units of length
are 1, 2, 3, 4, 5 and 6 ft. (305, 610, • Standard duty models are available Finish: Standard finish is AW
914, 1219, 1524 and 1829 mm). for ceiling, wall or sill installations. Appliance White baked enamel.
However, the 4900 Series is Heavy duty models are designed Optional finish is AL Aluminum baked
available in any nominal length to specifically for use in floor enamel.
suit engineering and architectural installations. Premium finishes are SA Satin (clear)
requirements. Anodized or BC Brushed and Clear
Coat lacquer.
Other finishes are available.

Previous View Home Contents Dimensions Specification Performance B33

 LINEAR BAR GRILLES
Dimensional Data
Standard Duty Frame Types
Type A Type B Type C
• 1" (25) Border • 3/4" (19) Reduced Border • 1" (25) Border and Sub-Frame
OVERALL = D + 1 1/2" (38) OVERALL = D + 1" (25)
OVERALL = D + 2 1/8" (54)
1" (25) 3/4" (19) 1" (25)
3/8"
(10)

1 1/4" (32)
1 3/8" (35)
1 1/4" (32)

1 1/4" (32)
Standard
1 3/16" (30)
Frame

D = DUCT SIZE D - 1/4" (6)

D = DUCT SIZE
D = DUCT SIZE

B
Type D Type E
• 1" (25) Border • 1/2" (13) Narrow Border
• Deep Stack (permits DV option)
OVERALL = D + 1 1/2" (38) OVERALL = D + 1/2" (13)
LINEAR DIFFUSERS AND BAR GRILLES

1" (25) 1/2" (13)

1 1/4" (32)
1 13/16" (46)

D = DUCT SIZE

D = DUCT SIZE

Heavy Duty Mounting Frames for Floor Installations

Type F Type G Type H
• 1" (25) Border Flange • No Flange • 3/4" (19) Bevelled Border
• Flush Mounting
OVERALL = D + 1 5/8" (41)
OVERALL = D OVERALL = D + 1 1/8" (29)
1" (25)
3/16" 3/4" (19)
(5)

1/8"
1" (25)

(3) 1/8"
(3)
1 3/4" (44)
2" (51)

2" (51)

Removable core Removable core Removable core

with frame. with frame. with frame.

5/32"
(4)
5/32" 1/4" D = DUCT SIZE
(4) (6)
D = DUCT SIZE DUCT = DUCT SIZE

B34 Previous View Home Contents Dimensions Specification Performance

LINEAR BAR GRILLES
Dimensional Data
Available Core Styles
Pencil 1/2" (13) Spacing Pencil 1/2" (13) Spacing
Proof 1/4" (6) Bars Proof 1/4" (6) Bars
Model 49-240 • 0° Deflection Model 49-241 • 15° Deflection

1/2" 1/4" 1/2" 1/4"

15°
(13) (6) (13) (6)

3/4" 3/4"
5/8" (19) 5/8" (19)
(16) (16)
SUPPORT BAR SUPPORT BAR

PENCIL PROOF PENCIL PROOF

Pencil 1/2" (13) Spacing

Proof 1/4" (6) Bars B
Model 49-243 • 30° Deflection

1/2" 30° 1/4"

(13) (6)

LINEAR DIFFUSERS AND BAR GRILLES

3/4"
5/8" (19)
(16)
SUPPORT BAR

PENCIL PROOF

1/2" (13) Spacing 1/2" (13) Spacing

1/8" (3) Bars 1/8" (3) Bars
Model 49-280 • 0° Deflection Model 49-281 • 15° Deflection

1/2" 1/8" 1/2" 15° 1/8"

(13) (3) (13) (3)

3/4" 3/4"
5/8" (19) 5/8" (19)
(16) (16)
SUPPORT BAR SUPPORT BAR

Heel 1/4" (6) Spacing Heel 1/4" (6) Spacing

Proof 1/8" (3) Bars Proof 1/8" (3) Bars
Model 49-480 • 0° Deflection Model 49-481 • 15° Deflection

1/4" 1/8" 1/4" 1/8"

15°
(6) (3) (6) (3)

3/4" 3/4"
5/8" (19) 5/8" (19)
(16) (16)
SUPPORT BAR SUPPORT BAR

HEEL PROOF HEEL PROOF

Previous View Home Contents Dimensions Specification Performance B35

 LINEAR BAR GRILLES

Dimensional Data
Overall Length and Width

Frame A = OPENING WIDTH Frame

A = OPENING WIDTH
Types Types

CORE
CORE

N = NECK LENGTH
D = DUCT LENGTH N = NECK LENGTH
O = 0VERALL LENGTH D - 1/4" (6)
D = DUCT LENGTH
O = 0VERALL LENGTH
Type N O
A D - 1/2" (13) D + 1 1/2" (38)
B D - 1/2" (13) D + 1" (25)
B D D - 1/2" (13) D + 1 1/2" (38) Type N O
E D - 1/2" (13) D + 1/2" (13) C D - 1/2" (13) D + 2 1/8" (54)
F D D + 1 5/8" (41)
G D D Dimensions are for length or width.
H D D + 1 1/8" (29)
LINEAR DIFFUSERS AND BAR GRILLES

Dimensions are for length or width.

Standard Widths and Core

Duct 1/4" (6) Spacing Duct 1/2" (13) Spacing
Width D Opening Width A Number of Bars Width D Opening Width A Number of Bars
1 1/2 (38) 3/4 (19) 2 1 1/2 (38) 3/4 (19) 1
2 (51) 1 1/4 (32) 4 2 (51) 1 1/4 (32) 2
2 1/2 (64) 1 3/4 (44) 6 2 1/2 (64) 1 3/4 (44) 3
3 (76) 2 1/4 (57) 8 3 (76) 2 1/4 (57) 4
3 1/2 (89) 2 3/4 (70) 10 3 1/2 (89) 2 3/4 (70) 5
4 (102) 3 1/4 (83) 12 4 (102) 3 1/4 (83) 6
5 (127) 4 1/4 (108) 16 5 (127) 4 1/4 (108) 8
6 (152) 5 1/4 (133) 20 6 (152) 5 1/4 (133) 10
For frames types F, G & H increase the number of bars by two. For frames types F, G & H increase the numbers of bars by one.
Dimensions are in inches (mm).

Cross-Bar Spacing

72" (1829) MAXIMUM LENGTH FOR SINGLE SECTION

S S

Standard Core: S = 12" (305) maximum support bar spacing. Frame Types A, B, C, D and E.
Optional HC Heavy Duty Core: S = 8" (203) maximum.
Standard for floor models with frame types F, G, and H which also include secondary reinforcing support bars.

B36 Previous View Home Contents Dimensions Specification Performance

LINEAR BAR GRILLES

Dimensional Data
Typical Frame/Core Assemblies
Core with Frame Core with Frame & Sub-Frame

Type A Frame Type C Frame

Core with Heavy Duty Mounting Frame Core Only No Frame

B

LINEAR DIFFUSERS AND BAR GRILLES

Heavy Duty Supplied with
Cross-Bar heavy duty
Support reinforced core
and core clips
Type F Heavy Duty Mounting Frame Type CO No Frame

Fastenings

Type A • Countersunk Screw Holes Type B • Friction Spring Clip Type C • Concealed Mounting

For ceiling, side wall, sill or floor. For sill installations. For ceiling, side wall, sill or floor.
Frame Types Frame Types Frame Types
A, B, C, D, F. A, B, D, E, F, G, H. A, B, C, D, E.
Not recommended for use with
cores with 1/4" (6) bar spacing.

Previous View Home Contents Dimensions Specification Performance B37

 LINEAR BAR GRILLES

Dimensional Data
Mitered Corner Sections

49-240MC 49-281MC Factory welded with precision to match and align with the associated straight leg.
49-241MC 49-480MC Standard mitered corner section for floor, ceiling or wall is 90°. Other angles are
49-243MC 49-481MC available.
OUTSIDE
49-280MC
O
90° D'
Application Pattern
D

O
D'
INSIDE

B W

12" 12" 12" 12"

(305) (305) (305) (305) Floor, Ceiling or Sill
Type FO • 0° deflection
Type WC – Sidewall, inside Type WD – Sidewall, outside
LINEAR DIFFUSERS AND BAR GRILLES

Type FA • Deflection inside

Type FB • Deflection outside
90° Mitered Corner Dimension 'O'
Duct Duct Frame Type
Width D Length D ' A, D B C E F G H
1 1/2" – 4" 12" 12 3/4" (324) 12 1/2" (318) 13 1/16" (332) 12 1/4" (311) 12 13/16" (325) 12" (305) 12 9/16" (320)
4 1/2" – 12" 18" 18 3/4" (476) 18 1/2" (470) 19 1/16 (613) 18 1/4" (606) 18 13/16" (610) 18" (457) 18 9/16" (471)

Continuous Run Dimensions

OVERALL LENGTH
DUCT LENGTH
D' D'

D' 90° D'

MITERED
CORNER CENTER SECTIONS (TYPICAL)
SECTION NO END CAPS. TYPE 'OO' END CAP CONFIGURATION.

DUCT DUCT
LENGTH MULTIPLE UNITS SHOULD HAVE A PLAN VIEW SKETCH WITH ORDER. LENGTH
OVERALL OVERALL
LENGTH LENGTH
END SECTION (TYPICAL) END SECTION
ONE END CAP ONLY* ONE END CAP ONLY*

MAXIMUM SINGLE SECTION IS 72" (1829)

*End sections with single end caps and deflecting cores must be specified and ordered with the desired core deflection direction.
End cap configurations (mitered end cap one end and open opposite end):

Type 'MO' = 0° deflection Type 'MU' = Type 'MD' =

15° or 30° 15° or 30°

B38 Previous View Home Contents Dimensions Specification Performance

LINEAR BAR GRILLES

Options and Accessories

Type DV Directional Vanes Single Blade Damper

For all available widths. Friction hinge on 1 1/2" (38) and 2" (51) widths.
Fully adjustable extruded aluminum blades on 3/4" (19)
centers perpendicular to length.
1-13/16" (46)

Requires Frame Type D (deep stack), F, G or H

Opposed Blade Damper Access Doors

B
For linear bar grilles with a nominal duct width of 2 1/2" (64)
and wider.

LINEAR DIFFUSERS AND BAR GRILLES

3" (76)

Type AD1L (left side)

Type BO Steel Blank-Off

For all available widths. Supplied in 6' (1829) lengths for
field cutting. Steel, painted black.

1-5/16"
(33)
Type AD1R (right side)
NOMINAL WIDTH - 1/4" (6)

Alignment Strips
Supplied as standard on multiple section assemblies to
provide positive and accurate field alignment, except
frame G which uses alignment pins. X

CENTER SECTION:
Type AD3L Type AD3R (not shown)
Specify `X´ dim. (distance from end of grille frame)
Access door is a 6" (152) core section hinged on one side.
When selected with a deflected core, specify deflection:
Sill/Floor - To the front Wall - Up
- To the rear - Down

Previous View Home Contents Dimensions Specification Performance B39

 LINEAR BAR GRILLES

Typical Opening Preparations

Ceiling 1 Floor or Sill 1
Frame Types A, B, D, or E Frame Types F or H
FINISHED FLOOR, SILL OR CURB
DUCT

PLASTER STOP

DUCT

B FINISHED PLASTER CEILING

Floor or Sill 2 Raised Sill 1

LINEAR DIFFUSERS AND BAR GRILLES

Frame Type G Core Only

FINISHED FLOOR, SILL OR CURB
METAL ENCLOSURE

CORE SUPPORT

DUCT

Raised Sill 2 Side Wall 1

Frame Types A, B, D, or E Frame Types A, B, D, or E

FINISHED SILL-MARBLE, TERRAZO,

CONCRETE, VINYL TILE, ETC.

FINISHED
WOOD PANELING

DUCT
DUCT

B40 Previous View Home Contents Dimensions Specification Performance

LINEAR BAR GRILLES

HOW TO SPECIFY OR TO ORDER

(Show complete Model Number and Size, unless "Default" is desired).

Extruded Aluminum Linear Bar Grilles – Model Series 4900

49 - 2 4 0 - O - 60" x 4" - B - AW - C - MM - —
MODEL ACCESSORIES
- Linear Bar Grille - None (default) —
- Blank-Offs BO
BAR SPACING - Access Door AD
- 1/2" (13) 2 - Heavy Duty Core HC
- 1/4" (6) 4 - Deflector Vanes DV
BAR WIDTH END CAP CONFIGURATION
- 1/4" (6) 4 - Mitered Mitered (default) MM
- 1/8" (3) 8 - Open Open OO
- Mitered Open 0° MO
BAR DEFLECTION
- 0° 0
- Mitered Open 15°, 30° MU B
- 15° 1
- 30° 3

DAMPER - Mitered Open 15°, 30° MD

LINEAR DIFFUSERS AND BAR GRILLES

- No Damper (default) —
- With Damper O

LENGTH x WIDTH (inches or mm)

FASTENING
FRAME OR FRAME/SUB-FRAME COMBINATION
- None (default) N
- 1" (25) A
- Screw Holes A
- 3/4" (19) B
- Spring Clips B
- 1" (25) and Sub-Frame C
- Concealed Mounting C
- 1" (25) with Deep Neck D
- 1/2" (13) E FINISH
- 1" (25) Heavy Duty F - Appliance White (default) AW
- No Flange Heavy Duty G - Aluminum AL
- 3/4" (19) Heavy Duty H - Mill Finish MI
- No Frame Core Only CO - Brushed and BC
Notes: Clear Coat Lacquer
1. To use more than one "Accessory ", list the items in order and specify description. - Satin Anodized SA
2. It is helpful to include a sketch for multiple units with mitered corners. - Special SP

SUGGESTED SPECIFICATION: Specification Text File

Furnish and install Nailor Model (select one) 49-240 (1/2" (13) spacing, 1/4" (6) bar, 0° deflection); 49-241 (1/2" (13) spacing,
1/4" (6) bar, 15° deflection); 49-243 (1/2" (13) spacing, 1/4" (6) bar, 30° deflection); 49-280 (1/2" (13) spacing, 1/8" (3) bar, 0°
deflection); 49-281 (1/2" (13) spacing, 1/8" (3) bar, 15° deflection); 49-480 (1/4" (6) spacing, 1/8" (3) bar, 0° deflection); 49-481
(1/4" (6) spacing, 1/8" (3) bar, 15° deflection) Linear Bar Grilles of the sizes and capacities as shown on the plans and air
distribution schedules. The maximum length of a single section shall be 72" (1829) long. All sizes larger than 72" (1829) shall
be provided in continuous multiple sections. Alignment strips are to be provided for joining continuous grille sections together.
All frame types shall be extruded aluminum and include fastening as specified. A grille with a frame selection of A, B, C, D or E
shall have a non-removable core that has fixed extruded aluminum bars and extruded aluminum cross bars that are spaced on
a maximum of 12" (305) centers. A grille with a heavy duty floor frame selection of F, G or H shall have a removable core that
attaches with core clips. The core shall have fixed extruded aluminum bars and extruded aluminum cross bars that are spaced
on a maximum of 8" (203) centers. The finish is to be AW Appliance White baked enamel (optional finishes are available).
(Optional) A damper, constructed of heavy gauge corrosion-resistant steel and operable from the face of the grille, shall be
provided on all units.
The manufacturer shall provide published performance data for the linear bar grille, which shall be tested in accordance with
ANSI/ASHRAE Standard 70 – 2006.

Previous View Home Contents Dimensions Specification Performance B41

 LINEAR BAR GRILLES

Performance Data
Model 49-240 • 1/2" Spacing • 1/4" Bars • 0° Deflection
Free Area Nominal
Square Feet Duct
TP .010 .022 .039 .062 .087 .119 .156 .198 .245
Per Lineal Width
Foot (Inches)

CFM per Foot 10 16 21 26 31 36 42 47 52

NC — — 13 19 24 30 34 37 40
.026 1-1/2 T Sill or Floor 1-1-1 2-2-2 4-4-4 7-7-7 8-9-10 10-11-12 11-12-14 12-14-16 14-16-18
Side Wall 2-4-6 4-7-10 5-9-13 7-12-17 8-13-19 10-16-22 11-17-24 12-19-26 14-21-29
CFM per Foot 18 27 36 45 54 63 72 81 90
NC — — 12 18 23 29 33 36 39
.045 2 T Sill or Floor 1-1-1 4-4-4 7-7-7 9-9-10 10-11-13 13-14-16 14-16-18 15-17-20 17-19-21
Side Wall 3-5-7 5-9-12 7-11-16 9-14-20 11-17-23 13-19-26 14-21-28 15-22-30 17-25-33
CFM per Foot 26 40 53 66 79 92 106 119 132
NC — — 14 20 26 31 35 38 41
.066 2-1/2 Sill or Floor 2-2-2 6-6-6 8-8-9 11-12-13 13-14-16 15-17-19 18-20-22 21-22-23 22-23-24
B T
Side Wall 4-6-9 6-9-12 8-12-17 11-16-22 13-19-25 15-21-28 18-25-32 21-28-36 22-30-39
CFM per Foot 35 53 70 88 106 123 141 158 176
NC — — 15 21 27 32 36 39 42
.088 3 T Sill or Floor 2-2-2 7-7-7 10-10-11 12-13-15 15-16-18 18-19-21 20-22-24 24-24-25 26-26-27
Side Wall 5-7-10 7-11-15 10-14-19 12-17-23 15-21-27 18-24-31 20-27-34 24-31-39 26-34-41
LINEAR DIFFUSERS AND BAR GRILLES

CFM per Foot 44 66 88 110 132 154 176 198 220

NC — — 16 22 28 33 37 40 43
.110 3-1/2 T Sill or Floor 3-3-3 8-8-8 12-12-12 15-15-16 18-19-20 20-21-22 23-24-25 25-26-27 29-29-29
Side Wall 5-7-10 9-12-16 12-16-20 15-20-25 18-23-28 20-26-32 23-29-36 25-32-39 29-36-43
CFM per Foot 53 80 106 133 160 186 213 239 266
NC — — 17 23 29 34 38 41 44
.133 4 T Sill or Floor 3-3-3 9-9-9 13-13-13 16-16-17 20-20-21 22-23-24 24-25-26 28-28-28 31-31-31
Side Wall 6-8-11 10-13-17 13-17-21 16-21-26 20-25-30 22-28-34 24-30-37 28-35-41 31-38-45
CFM per Foot 71 106 142 177 212 248 283 318 354
NC — 10 18 24 30 35 39 42 45
.177 5 T Sill or Floor 4-4-4 10-10-10 15-15-15 18-18-18 22-22-23 25-25-25 27-27-28 30-30-30 34-34-34
Side Wall 8-10-13 11-14-18 15-19-23 18-22-27 22-27-32 25-31-37 27-33-39 30-37-43 34-41-47
CFM per Foot 89 133 178 222 266 310 355 400 444
NC — 11 20 25 31 36 40 43 46
.222 6 T Sill or Floor 5-5-5 10-10-10 15-15-15 19-19-19 23-23-23 25-25-25 29-29-29 31-31-31 36-36-36
Side Wall 9-11-14 13-16-20 16-20-24 20-24-29 24-29-34 28-33-39 30-35-40 34-40-45 38-44-49

CFM - cubic feet per minute. Throw Correction for Length

FPM - feet per minute velocity. NC Correction for Length Active Terminal Velocity
TP - total pressure - inches w.g. Active Length, Ft. 1 2 4 8 10 15 20 Length 150 fpm 100 fpm 50 fpm
T - throw in feet. 1 ft. 0.5 0.6 0.7
Correction Factor -10 -7 -4 -1 0 +2 +3
NC - Noise Criteria (values) based on 10 ft. + 1.6 1.4 1.2
10 dB room absorption, re 10 -12
watts.
Ak Factor per foot
Performance Notes: Nominal
Width Supply Return
1. Throws are given at 150, 100 and 50 4. Return Air Applications:
fpm terminal velocities. NC value is increased by + 4. 1 1/2" .035 .030
2. Throw values are based on a 4 foot Neg. SP = 0.8 x TP. 2" .054 .046
section with a cooling ∆T of 20°F (11°C). 2 1/2" .075 .064
5. Data derived from tests conducted 3" .098 .083
For other lengths, use the correction
factor table above. in accordance with ANSI/ASHRAE
3 1/2" .120 .102
Standard 70 – 2006.
3. NC values are based on a 10 foot 4" .143 .121
active section. For other lengths, use the 5" .187 .159
correction factor table above. 6" .233 .198

B42 Previous View Home Contents Dimensions Specification Performance

 LINEAR BAR GRILLES

Performance Data
Model 49-241 • 1/2" Spacing • 1/4" Bars • 15° Deflection
Free Area Nominal
Square Feet Duct
TP .012 .025 .047 .074 .105 .142 .187 .237 .294
Per Lineal Width
Foot (Inches)

CFM per Foot 12 19 25 31 37 43 50 56 62

NC — 16 24 32 37 42 46 49 52
.031 1-1/2 T Sill or Floor 1-1-1 3-3-3 5-5-5 7-7-7 9-9-10 10-11-12 12-13-15 13-15-17 14-16-18
Side Wall 2-4-6 4-7-10 6-10-14 7-12-17 9-14-20 10-16-23 12-18-25 13-20-27 14-22-30
CFM per Foot 19 29 38 48 58 67 77 86 96
NC — 12 20 27 32 37 41 44 47
.048 2 T Sill or Floor 1-1-1 4-4-4 7-7-7 9-9-10 11-12-13 13-14-15 15-16-18 16-18-20 17-19-22
Side Wall 3-5-7 5-8-12 7-11-16 9-14-20 11-17-24 13-19-26 15-22-29 16-23-31 17-25-34
CFM per Foot 27 40 54 67 80 94 107 120 134
NC — 12 20 27 32 37 41 44 47
.067 2-1/2 T Sill or Floor 1-1-1 5-5-5 9-9-9 11-11-12 13-14-15 15-16-18 17-19-21 20-21-22 22-22-23
Side Wall 4-6-8 6-9-13 9-13-17 11-16-21 14-19-25 15-21-27 17-24-31 20-27-35 22-29-38 B
CFM per Foot 34 52 69 86 103 120 138 155 172
NC — 12 20 27 32 37 41 44 47
.086 3 T Sill or Floor 2-2-2 6-6-6 10-10-11 12-13-14 15-16-18 18-19-20 20-21-23 23-24-25 25-25-25
Side Wall 4-6-9 8-11-15 10-14-19 13-18-23 16-21-27 18-24-31 21-28-35 23-30-38 26-34-41

LINEAR DIFFUSERS AND BAR GRILLES

CFM per Foot 42 63 84 105 126 147 168 189 210
NC — 12 20 28 33 38 42 45 48
.105 3-1/2 T Sill or Floor 2-2-2 8-8-8 11-11-12 15-15-15 17-18-19 21-21-22 22-23-25 25-25-26 28-28-29
Side Wall 6-8-11 9-12-16 12-16-21 14-19-24 18-23-29 21-27-33 23-29-36 25-32-39 28-36-43
CFM per Foot 51 76 102 127 152 178 203 228 254
NC — 13 21 29 34 39 43 46 49
.127 4 T Sill or Floor 3-3-3 9-9-9 13-13-13 16-16-17 19-20-21 22-22-23 24-25-26 27-27-27 30-30-30
Side Wall 6-9-12 10-13-17 13-17-22 15-20-25 19-24-30 22-28-34 25-31-38 28-36-41 30-37-44
CFM per Foot 67 100 134 167 200 234 267 301 334
NC — 13 21 29 34 39 43 46 49
.167 5 T Sill or Floor 4-4-4 10-10-10 14-14-14 18-18-18 21-21-22 24-24-25 26-27-28 30-30-30 32-32-32
Side Wall 8-11-14 11-15-19 15-19-24 19-23-28 21-26-32 24-30-36 26-32-39 29-36-42 33-39-46
CFM per Foot 84 126 168 210 252 294 336 378 420
NC — 15 23 31 36 41 45 48 51
.210 6 T Sill or Floor 5-5-5 10-10-10 15-15-15 19-19-19 23-23-23 25-25-25 28-28-29 31-31-31 35-35-35
Side Wall 9-12-15 14-17-21 17-21-25 20-24-29 24-29-34 27-32-38 29-35-40 32-38-43 36-42-47

CFM - cubic feet per minute. Throw Correction for Length

FPM - feet per minute velocity. NC Correction for Length Active Terminal Velocity
TP - total pressure - inches w.g. Active Length, Ft. 1 2 4 8 10 15 20 Length 150 fpm 100 fpm 50 fpm
T - throw in feet. 1 ft. 0.5 0.6 0.7
Correction Factor -10 -7 -4 -1 0 +2 +3
NC - Noise Criteria (values) based on 10 ft. + 1.6 1.4 1.2
10 dB room absorption, re 10 -12
watts.
Performance Notes: Ak Factor per foot
Nominal
1. Throws are given at 150, 100 and 50 4. Return Air Applications: Width Supply Return
fpm terminal velocities. NC value is increased by + 4. 1 1/2" .041 .037
2. Throw values are based on a 4 foot Neg. SP = 0.8 x TP. 2" .058 .051
section with a cooling ∆T of 20°F (11°C). 2 1/2" .076 .066
5. Data derived from tests conducted in 3"
For other lengths, use the correction .095 .080
factor table above. accordance with ANSI/ASHRAE
3 1/2" .115 .098
Standard 70 – 2006.
3. NC values are based on a 10 foot 4" .137 .113
active section. For other lengths, use the 5" .177 .148
correction factor table above. 6" .230 .189

Previous View Home Contents Dimensions Specification Performance B43

 LINEAR BAR GRILLES

Performance Data
Model 49-243 • 1/2" Spacing • 1/4" Bars • 30° Deflection
Free Area Nominal
Square Feet Duct
Per Lineal Width TP .012 .025 .047 .074 .105 .142 .187 .237 .294
Foot (Inches)

CFM per Foot 12 19 25 31 37 43 50 56 62

NC — 16 24 32 37 42 46 49 52
.031 1-1/2 T Sill or Floor 1-1-1 3-3-3 5-5-5 7-7-7 9-9-10 10-11-12 12-13-15 13-15-17 14-16-18
Side Wall 2-4-6 4-7-10 6-10-14 7-12-17 9-14-20 10-16-23 12-18-25 13-20-27 14-22-30
CFM per Foot 19 29 38 48 58 67 77 86 96
NC — 12 20 27 32 37 41 44 47
.048 2 T Sill or Floor 1-1-1 4-4-4 7-7-7 9-9-10 11-12-13 13-14-15 15-16-18 16-18-20 17-19-22
Side Wall 3-5-7 5-8-12 7-11-16 9-14-20 11-17-24 13-19-26 15-22-29 16-23-31 17-25-34
CFM per Foot 27 40 54 67 80 94 107 120 134
NC — 12 20 27 32 37 41 44 47
.067 2-1/2 Sill or Floor 1-1-1 5-5-5 9-9-9 11-11-12 13-14-15 15-16-18 17-19-21 20-21-22 22-22-23
B T
Side Wall 4-6-8 6-9-13 9-13-17 11-16-21 14-19-25 15-21-27 17-24-31 20-27-35 22-29-38
CFM per Foot 34 52 69 86 103 120 138 155 172
NC — 12 20 27 32 37 41 44 47
.086 3 T Sill or Floor 2-2-2 6-6-6 10-10-11 12-13-14 15-16-18 18-19-20 20-21-23 23-24-25 25-25-25
Side Wall 4-6-9 8-11-15 10-14-19 13-18-23 16-21-27 18-24-31 21-28-35 23-30-38 26-34-41
LINEAR DIFFUSERS AND BAR GRILLES

CFM per Foot 42 63 84 105 126 147 168 189 210

NC — 12 20 28 33 38 42 45 48
.105 3-1/2 T Sill or Floor 2-2-2 8-8-8 11-11-12 15-15-15 17-18-19 21-21-22 22-23-25 25-25-26 28-28-29
Side Wall 6-8-11 9-12-16 12-16-21 14-19-24 18-23-29 21-27-33 23-29-36 25-32-39 28-36-43
CFM per Foot 51 76 102 127 152 178 203 228 254
NC — 13 21 29 34 39 43 46 49
.127 4 T Sill or Floor 3-3-3 9-9-9 13-13-13 16-16-17 19-20-21 22-22-23 24-25-26 27-27-27 30-30-30
Side Wall 6-9-12 10-13-17 13-17-22 15-20-25 19-24-30 22-28-34 25-31-38 28-36-41 30-37-44
CFM per Foot 67 100 134 167 200 234 267 301 334
NC — 13 21 29 34 39 43 46 49
.167 5 T Sill or Floor 4-4-4 10-10-10 14-14-14 18-18-18 21-21-22 24-24-25 26-27-28 30-30-30 32-32-32
Side Wall 8-11-14 11-15-19 15-19-24 19-23-28 21-26-32 24-30-36 26-32-39 29-36-42 33-39-46
CFM per Foot 84 126 168 210 252 294 336 378 420
NC — 15 23 31 36 41 45 48 51
.210 6 T Sill or Floor 5-5-5 10-10-10 15-15-15 19-19-19 23-23-23 25-25-25 28-28-29 31-31-31 35-35-35
Side Wall 9-12-15 14-17-21 17-21-25 20-24-29 24-29-34 27-32-38 29-35-40 32-38-43 36-42-47

CFM - cubic feet per minute. Throw Correction for Length

FPM - feet per minute velocity. NC Correction for Length Active Terminal Velocity
TP - total pressure - inches w.g. Active Length, Ft. 1 2 4 8 10 15 20 Length 150 fpm 100 fpm 50 fpm
T - throw in feet. 1 ft. 0.5 0.6 0.7
Correction Factor -10 -7 -4 -1 0 +2 +3
NC - Noise Criteria (values) based on 10 ft. + 1.6 1.4 1.2
10 dB room absorption, re 10 -12
watts.
Performance Notes: Ak Factor per foot
Nominal
1. Throws are given at 150, 100 and 50 4. Return Air Applications: Width Supply Return
fpm terminal velocities. NC value is increased by + 4. 1 1/2" .041 .037
2. Throw values are based on a 4 foot Neg. SP = 0.8 x TP. 2" .058 .051
section with a cooling ∆T of 20°F (11°C). 2 1/2" .076 .066
5. Data derived from tests conducted
For other lengths, use the correction 3" .095 .080
in accordance with ANSI/ASHRAE
factor table above. 3 1/2" .115 .098
Standard 70 – 2006.
3. NC values are based on a 10 foot 4" .137 .113
active section. For other lengths, use the 5" .177 .148
correction factor table above. 6" .230 .189

B44 Previous View Home Contents Dimensions Specification Performance

LINEAR BAR GRILLES

Performance Data
Model 49-280 • 1/2" Spacing • 1/8" Bars • 0° Deflection
Free Area Nominal
Square Feet Duct
Per Lineal Width TP .009 .020 .035 .056 .078 .107 .140 .178 .220
Foot (Inches)

CFM per Foot 14 21 28 35 42 49 56 63 70

NC — — 16 22 28 32 36 39 42
.035 1-1/2 T Sill or Floor 1-1-1 2-2-2 4-4-4 7-7-7 8-9-10 10-11-12 11-12-14 12-14-17 13-15-18
Side Wall 2-4-6 4-7-10 6-7-13 7-12-17 8-13-19 10-16-22 11-17-24 12-19-26 13-21-29
CFM per Foot 22 33 44 55 66 77 88 99 110
NC — — 12 18 23 28 32 35 38
.055 2 T Sill or Floor 1-1-1 4-4-4 7-7-7 9-9-10 11-11-12 13-14-16 14-16-18 15-17-20 17-19-21
Side Wall 3-5-7 5-8-12 7-11-16 9-14-20 11-17-23 13-19-26 14-21-28 15-22-30 17-25-33
CFM per Foot 30 44 59 74 89 104 118 133 148
NC — — 11 17 22 27 31 34 37
.074 2-1/2 Sill or Floor 1-1-1 5-5-5 9-9-9 11-11-12 13-14-15 15-16-17 18-19-20 20-21-23 23-24-25
T
Side Wall 4-6-8 6-9-13 9-13-17 11-16-21 13-18-24 15-21-28 17-24-31 20-27-35 23-31-39 B
CFM per Foot 38 58 77 96 115 134 154 173 192
NC — — 11 17 22 27 31 34 37
.096 3 T Sill or Floor 2-2-2 7-7-7 10-10-11 12-13-14 15-16-17 18-19-20 20-21-23 23-24-25 25-25-26
Side Wall 5-7-10 7-10-14 10-14-19 12-17-23 15-20-26 18-24-30 20-27-34 23-30-38 25-33-41

LINEAR DIFFUSERS AND BAR GRILLES

CFM per Foot 46 69 93 116 139 162 186 209 232
NC — — 11 17 22 27 31 34 37
.116 3-1/2 T Sill or Floor 3-3-3 8-8-8 12-12-12 15-15-16 18-19-20 20-21-23 23-24-25 25-26-27 29-29-29
Side Wall 5-7-10 9-12-16 12-16-20 15-20-25 18-23-28 20-26-32 23-29-36 25-32-39 29-36-43
CFM per Foot 56 83 111 139 167 195 222 250 278
NC — — 12 18 23 28 32 35 38
.139 4 T Sill or Floor 3-3-3 9-9-9 13-13-13 16-16-17 20-20-21 23-23-24 24-25-26 27-27-27 30-30-30
Side Wall 6-8-11 10-13-17 13-17-21 16-20-25 20-25-30 22-28-34 24-30-37 28-35-41 31-38-44
CFM per Foot 72 107 143 179 215 250 286 322 358
NC — — 12 18 23 28 32 35 38
.179 5 T Sill or Floor 4-4-4 10-10-10 14-14-14 18-18-18 22-22-23 24-24-24 27-27-28 30-30-31 32-32-32
Side Wall 8-10-13 11-14-18 15-19-23 18-22-27 22-27-32 24-30-36 27-33-39 30-37-43 34-41-47
CFM per Foot 88 133 177 221 265 310 354 398 442
NC — — 14 20 24 29 33 36 39
.221 6 T Sill or Floor 5-5-5 10-10-10 15-15-15 18-18-18 23-23-23 25-25-25 28-28-28 31-31-31 32-32-32
Side Wall 9-12-15 13-16-20 16-20-24 20-24-29 24-29-34 28-33-39 30-35-40 34-40-45 38-44-49

CFM - cubic feet per minute. Throw Correction for Length

FPM - feet per minute velocity. NC Correction for Length Active Terminal Velocity
TP - total pressure - inches w.g. Active Length, Ft. 1 2 4 8 10 15 20 Length 150 fpm 100 fpm 50 fpm
T - throw in feet. 1 ft. 0.5 0.6 0.7
Correction Factor -10 -7 -4 -1 0 +2 +3
NC - Noise Criteria (values) based on 10 ft. + 1.6 1.4 1.2
10 dB room absorption, re 10 -12
watts.
Performance Notes: Ak Factor per foot
Nominal
4. Return Air Applications: Width Supply Return
1. Throws are given at 150, 100 and 50
fpm terminal velocities. NC value is increased by + 4. 1 1/2" .047 .040
2. Throw values are based on a 4 foot Neg. SP = 0.8 x TP. 2" .066 .055
section with a cooling ∆T of 20°F (11°C). 2 1/2" .084 .073
5. Data derived from tests conducted
For other lengths, use the correction 3" .107 .089
in accordance with ANSI/ASHRAE
factor table above. 3 1/2" .127 .113
Standard 70 – 2006.
3. NC values are based on a 10 foot 4" .150 .127
active section. For other lengths, use the 5" .190 .163
correction factor table above. 6" .232 .197

Previous View Home Contents Dimensions Specification Performance B45

 LINEAR BAR GRILLES

Performance Data
Model 49-281 • 1/2" Spacing • 1/8" Bars • 15° Deflection
Free Area Nominal
Square Feet Duct
Per Lineal Width TP .009 .020 .035 .056 .078 .107 .140 .178 .220
Foot (Inches)

CFM per Foot 16 23 31 39 47 55 62 70 78

NC — 18 27 33 38 43 47 50 53
.039 1-1/2 T Sill or Floor 1-1-1 3-3-3 5-5-5 8-8-8 9-9-10 10-11-13 12-13-15 13-15-17 14-16-18
Side Wall 2-4-6 4-7-10 6-10-14 8-13-18 9-14-20 10-16-23 12-18-25 13-20-27 14-22-30
CFM per Foot 22 34 45 56 67 78 90 101 112
NC — 12 20 26 31 36 40 44 47
.056 2 T Sill or Floor 1-1-1 4-4-4 7-7-7 9-9-10 11-12-13 12-14-16 14-16-18 15-17-20 18-19-21
Side Wall 3-5-7 5-8-12 7-11-16 9-14-20 11-17-23 12-18-25 14-20-27 15-22-30 18-26-34
CFM per Foot 30 45 60 75 90 105 120 135 150
NC — 10 18 24 30 35 39 43 46
.075 2-1/2 Sill or Floor 1-1-1 5-5-5 8-8-9 11-11-12 13-14-15 15-16-18 17-19-21 20-21-22 22-22-23
B T
Side Wall 4-6-8 6-9-13 8-12-17 11-16-21 13-19-25 15-21-27 17-24-31 20-27-35 22-30-38
CFM per Foot 37 56 74 93 112 130 149 167 186
NC — — 17 23 29 34 38 42 45
.093 3 T Sill or Floor 2-2-2 6-6-6 10-10-10 12-12-13 15-16-17 18-19-20 20-21-23 23-23-24 25-25-25
Side Wall 4-6-9 7-10-14 10-13-18 12-17-22 15-20-26 18-24-30 20-26-33 23-30-37 25-32-39
LINEAR DIFFUSERS AND BAR GRILLES

CFM per Foot 45 68 90 113 136 158 181 203 226

NC — — 17 23 29 34 38 42 45
.113 3-1/2 T Sill or Floor 2-2-2 7-7-7 12-12-12 14-14-15 17-18-19 20-21-22 22-23-24 25-25-26 27-27-27
Side Wall 5-7-10 8-11-15 12-16-20 14-18-23 17-22-27 20-25-31 22-28-35 25-32-39 27-34-41
CFM per Foot 53 80 106 133 160 186 212 239 266
NC — 10 18 24 30 35 39 43 46
.133 4 T Sill or Floor 3-3-3 8-8-9 13-13-13 15-15-16 19-19-20 22-22-23 24-24-25 26-26-27 30-30-30
Side Wall 6-8-11 9-12-16 13-17-21 15-19-24 19-24-29 22-27-33 24-30-36 26-33-39 30-37-43
CFM per Foot 69 104 138 173 208 242 277 312 346
NC — 10 18 24 30 35 39 43 46
.173 5 T Sill or Floor 4-4-4 9-9-9 14-14-14 17-17-17 20-21-22 24-24-24 26-26-27 29-29-29 32-32-32
Side Wall 8-10-13 11-14-18 15-19-23 17-21-26 20-25-31 24-29-35 26-33-38 29-35-41 32-39-45
CFM per Foot 85 127 170 212 254 296 339 382 424
NC — 10 18 24 30 35 39 43 46
.212 6 T Sill or Floor 5-5-5 10-10-10 15-15-15 18-18-18 23-23-23 25-25-25 28-28-28 30-30-30 34-34-34
Side Wall 9-11-14 13-16-20 16-20-24 20-24-28 23-27-32 25-30-36 28-33-39 31-37-42 35-41-46

CFM - cubic feet per minute. Throw Correction for Length

FPM - feet per minute velocity. NC Correction for Length Active Terminal Velocity
TP - total pressure - inches w.g. Active Length, Ft. 1 2 4 8 10 15 20 Length 150 fpm 100 fpm 50 fpm
T - throw in feet. 1 ft. 0.5 0.6 0.7
Correction Factor -10 -7 -4 -1 0 +2 +3
NC - Noise Criteria (values) based on 10 ft. + 1.6 1.4 1.2
10 dB room absorption, re 10 -12
watts.
Performance Notes: Ak Factor per foot
Nominal
1. Throws are given at 150, 100 and 50 4. Return Air Applications: Width Supply Return
fpm terminal velocities. NC value is increased by + 4. 1 1/2" .052 .047
2. Throw values are based on a 4 foot Neg. SP = 0.8 x TP. 2" .067 .060
section with a cooling ∆T of 20°F (11°C). 2 1/2" .086 .075
5. Data derived from tests conducted
For other lengths, use the correction 3" .103 .091
factor table above. in accordance with ANSI/ASHRAE
3 1/2" .123 .103
Standard 70 – 2006.
3. NC values are based on a 10 foot 4" .143 .126
active section. For other lengths, use the 5" .183 .157
correction factor table above. 6" .222 .188

B46 Previous View Home Contents Dimensions Specification Performance

 LINEAR BAR GRILLES

Performance Data
Model 49-480 • 1/4" Spacing • 1/8" Bars • 0° Deflection
Free Area Nominal
Square Feet Duct
Per Lineal Width TP .011 .024 .043 .068 .096 .130 .171 .218 .269
Foot (Inches)

CFM per Foot 12 19 25 31 37 43 50 56 62

NC — — 14 20 24 29 33 36 39
.031 1-1/2 T Sill or Floor 1-1-1 2-2-2 4-4-4 6-6-6 8-8-9 9-10-11 10-11-13 12-13-15 13-15-18
Side Wall 2-4-6 4-7-10 6-9-13 7-11-16 8-13-19 9-15-21 10-16-23 12-18-25 13-20-28
CFM per Foot 19 28 37 47 56 66 75 84 94
NC — — 12 18 23 29 32 36 39
.047 2 T Sill or Floor 1-1-1 4-4-4 6-6-6 9-9-9 11-11-12 12-13-15 14-15-17 15-17-19 16-18-20
Side Wall 3-5-7 5-8-11 7-11-15 9-14-19 11-16-22 12-18-25 14-20-27 15-22-29 16-24-32
CFM per Foot 26 39 52 65 78 91 104 117 130
NC — — 14 20 24 30 34 37 40
.065 2-1/2 Sill or Floor 1-1-1 5-5-5 8-8-8 10-10-11 13-14-15 15-16-17 16-18-20 20-20-21 22-22-22
T
Side Wall 4-6-8 6-9-12 8-12-16 10-15-20 13-18-24 15-21-27 16-22-30 20-27-34 22-30-38 B
CFM per Foot 33 50 66 83 100 116 133 149 166
NC — — 14 20 26 31 35 38 41
.083 3 T Sill or Floor 2-2-2 6-6-6 9-9-10 12-12-13 15-16-17 18-19-20 20-21-22 23-23-23 25-25-25
Side Wall 4-6-9 7-10-14 9-13-18 12-17-22 15-20-25 18-23-29 20-26-33 23-30-37 25-32-39

LINEAR DIFFUSERS AND BAR GRILLES

CFM per Foot 41 61 82 102 122 143 163 184 204
NC — — 15 21 27 32 36 39 42
.102 3-1/2 T Sill or Floor 2-2-2 7-7-7 10-10-11 15-15-15 17-18-19 20-21-22 22-23-24 25-25-26 27-27-27
Side Wall 5-7-10 8-11-15 10-15-20 15-19-24 17-22-27 20-25-31 22-28-35 25-32-39 27-34-41
CFM per Foot 49 73 98 122 146 171 195 220 244
NC — — 16 22 29 33 37 40 43
.122 4 T Sill or Floor 3-3-3 8-8-8 12-12-13 15-15-16 19-19-20 21-21-23 24-24-25 26-26-27 29-29-30
Side Wall 6-8-11 9-12-16 12-16-20 15-20-25 19-24-29 21-26-32 24-30-36 26-33-39 30-37-46
CFM per Foot 63 94 125 157 188 220 251 282 314
NC — — 16 22 28 33 37 40 43
.157 5 T Sill or Floor 4-4-4 9-9-9 14-14-14 17-17-17 21-21-22 24-24-24 27-27-27 29-29-29 32-32-32
Side Wall 7-9-12 11-14-18 14-18-22 17-21-26 21-26-31 24-29-35 27-33-39 30-36-42 33-40-46
CFM per Foot 78 116 155 194 233 272 310 349 388
NC — 10 18 24 30 35 38 42 43
.194 6 T Sill or Floor 5-5-5 10-10-10 15-15-15 18-18-18 23-23-23 25-25-25 28-28-29 31-31-31 34-34-34
Side Wall 8-10-13 12-15-19 15-19-23 20-24-28 23-27-32 26-31-37 29-34-39 33-39-44 37-43-48

CFM - cubic feet per minute. Throw Correction for Length

FPM - feet per minute velocity. NC Correction for Length Active Terminal Velocity
TP - total pressure - inches w.g. Active Length, Ft. 1 2 4 8 10 15 20 Length 150 fpm 100 fpm 50 fpm
T - throw in feet. 1 ft. 0.5 0.6 0.7
Correction Factor -10 -7 -4 -1 0 +2 +3
NC - Noise Criteria (values) based on 10 ft. + 1.6 1.4 1.2
10 dB room absorption, re 10 -12
watts.
Performance Notes: Ak Factor per foot
Nominal
Width Supply Return
1. Throws are given at 150, 100 and 50 4. Return Air Applications:
fpm terminal velocities. NC value is increased by + 4. 1 1/2" .041 .034
2. Throw values are based on a 4 foot Neg. SP = 0.8 x TP. 2" .056 .048
section with a cooling ∆T of 20°F (11°C). 2 1/2" .074 .064
5. Data derived from tests conducted 3"
For other lengths, use the correction .092 .078
factor table above. in accordance with ANSI/ASHRAE
3 1/2" .111 .098
Standard 70 – 2006.
3. NC values are based on a 10 foot 4" .131 .111
active section. For other lengths, use the 5" .166 .143
correction factor table above. 6" .203 .173

Previous View Home Contents Dimensions Specification Performance B47

 LINEAR BAR GRILLES

Performance Data
Model 49-481 • 1/4" Spacing • 1/8" Bars • 15° Deflection
Free Area Nominal
Square Feet Duct
Per Lineal Width TP .012 .026 .049 .077 .109 .148 .195 .247 .304
Foot (Inches)

CFM per Foot 14 20 27 34 41 48 54 61 68

NC — 14 22 30 35 39 43 46 49
.034 1-1/2 T Sill or Floor 1-1-1 3-3-3 4-4-4 7-7-7 9-9-10 10-11-12 12-13-15 13-14-16 14-16-18
Side Wall 2-4-6 4-7-10 6-10-14 7-12-17 9-14-20 10-16-22 12-18-25 13-20-27 14-22-30
CFM per Foot 20 29 39 49 59 69 78 88 98
NC — 12 20 27 32 37 41 44 47
.049 2 T Sill or Floor 1-1-1 4-4-4 6-6-6 9-9-9 11-11-12 12-13-15 14-16-18 15-17-19 16-18-20
Side Wall 3-5-7 5-8-11 7-11-15 9-14-19 11-16-22 12-18-25 14-20-27 15-22-29 16-24-32
CFM per Foot 26 39 52 65 78 91 104 117 130
NC — 12 20 27 32 37 41 44 47
.065 2-1/2 Sill or Floor 1-1-1 5-5-5 8-8-8 10-10-11 13-14-15 14-15-17 17-18-20 19-20-21 21-21-22
B T
Side Wall 4-6-8 6-9-12 8-12-16 10-15-20 13-19-24 14-20-26 17-23-30 19-26-33 21-28-36
CFM per Foot 33 49 66 82 98 115 131 148 164
NC — 12 20 27 32 37 41 44 47
.082 3 T Sill or Floor 2-2-2 6-6-6 9-9-9 12-12-13 15-15-16 17-18-19 20-21-22 21-22-23 23-23-24
Side Wall 4-6-9 7-10-13 9-13-17 12-16-21 15-20-25 17-22-28 20-26-32 21-28-35 23-31-39
LINEAR DIFFUSERS AND BAR GRILLES

CFM per Foot 40 59 79 99 119 138 158 178 198

NC — 12 20 28 33 37 41 44 47
.099 3-1/2 T Sill or Floor 2-2-2 8-8-8 11-11-11 13-13-14 16-17-18 19-20-21 22-22-23 23-24-25 26-26-26
Side Wall 5-7-9 8-11-14 11-15-19 13-17-22 16-21-26 19-24-30 22-28-34 23-30-37 26-33-40
CFM per Foot 47 70 94 117 140 164 187 220 234
NC — 13 21 28 34 38 42 45 48
.117 4 T Sill or Floor 3-3-3 9-9-9 12-12-12 15-15-15 18-19-20 21-21-22 23-24-25 25-25-26 28-28-28
Side Wall 5-7-10 9-12-15 12-16-20 15-19-24 18-23-28 21-26-32 23-29-35 25-32-39 29-36-42
CFM per Foot 61 91 121 152 182 212 243 274 304
NC — 14 22 29 34 39 43 46 49
.152 5 T Sill or Floor 3-3-3 9-9-9 13-13-13 16-16-17 20-20-21 23-23-24 25-25-26 28-28-28 31-31-31
Side Wall 7-9-12 10-13-17 14-18-22 16-21-26 20-25-30 23-28-34 25-31-37 28-34-40 31-38-44
CFM per Foot 74 111 149 186 223 260 298 335 372
NC — 14 22 30 35 40 43 47 50
.186 6 T Sill or Floor 4-4-4 10-10-10 14-14-14 18-18-18 22-22-22 25-25-25 28-28-28 30-30-30 33-32-32
Side Wall 8-10-13 11-14-18 15-19-23 19-23-27 23-27-31 25-30-35 28-33-39 31-37-42 34-40-45

CFM - cubic feet per minute. Throw Correction for Length

FPM - feet per minute velocity. NC Correction for Length Active Terminal Velocity
TP - total pressure - inches w.g. Active Length, Ft. 1 2 4 8 10 15 20 Length 150 fpm 100 fpm 50 fpm
T - throw in feet. 1 ft. 0.5 0.6 0.7
Correction Factor -10 -7 -4 -1 0 +2 +3
NC - Noise Criteria (values) based on 10 ft. + 1.6 1.4 1.2
10 dB room absorption, re 10 -12
watts.
Performance Notes: Ak Factor per foot
Nominal
Width Supply Return
1. Throws are given at 150, 100 and 50 4. Return Air Applications:
fpm terminal velocities. NC value is increased by + 4. 1 1/2" .045 .041
2. Throw values are based on a 4 foot Neg. SP = 0.8 x TP. 2" .059 .053
section with a cooling ∆T of 20°F (11°C). 2 1/2" .074 .065
5. Data derived from tests conducted 3"
For other lengths, use the correction .091 .080
factor table above. in accordance with ANSI/ASHRAE
3 1/2" .108 .091
Standard 70 – 2006.
3. NC values are based on a 10 foot 4" .126 .108
active section. For other lengths, use the 5" .161 .138
correction factor table above. 6" .195 .166

B48 Previous View Home Contents Dimensions Specification Performance

LINEAR LOUVER DIFFUSERS

LINEAR LOUVER
DIFFUSERS
• EXTRUDED ALUMINUM
• ARCHITECTURAL
• HIGH CAPACITY
• SQUARE OR RECTANGULAR
NECKS

Models:
48LL1 One-way Pattern
48LL2 Two-way Pattern
• Suffix '- O' adds a steel OBD
• Suffix '- OA' adds an aluminum
OBD
Models 48LL1 and 48LL2 B
The Nailor 48LL Series Linear Louver (Vane) Diffusers feature architectural linear styling for high capacity supply and
return air applications in hard ceilings or sidewalls. They are designed for duct mounted installation. Standard finish is a
high quality, baked enamel for long life and easy cleaning. Designed for use in discrete lengths, the fixed louvers provide

LINEAR DIFFUSERS AND BAR GRILLES

a tight horizontal discharge pattern over a wide range of airflow rates and are an excellent choice for VAV systems.

FEATURES: Options: • Type A screw fastening (face).

• Spring loaded core. Removable • Steel opposed blade damper
Material: Aluminum extrusions.
without the use of tools. (factory mounted) – Model 48LL1-O
or 48LL2-O. Finish: AW Appliance White baked
• Secure core attachment.
• Aluminum opposed blade damper enamel finish is standard. Other
• Installation is with concealed screws finishes are available.
(factory mounted) – Model 48LL1-OA
through the neck of the outer frame,
or 48LL2-OA.
providing an aesthetically clean visual
appearance (Type N). • DV Directional vanes.
W + 4 3/4" (121)

CEILING OPENING = L + 3" (76)

NOMINAL DUCT SIZE L
L – 1/4" (6)
OPTIONAL OPTIONAL REAR
OPPOSED BLADE DIRECTIONAL VANES
4 1/4" (108)

DAMPER
1/4"
2 1/2" (38)

(6)

L + 4 3/4" (121)

Previous View Home Contents Dimensions Specification Performance B49

 LINEAR LOUVER DIFFUSERS

Dimensional Data
Linear Louver Diffusers

AVAILABLE SIZES:
Unit Size is determined by duct width W.
Diffuser necks are undersized.

Model 48LL1:
Available widths are 3", 4 1/2", 6", 7 1/2",
NOMINAL DUCT SIZE W
9", 10 1/2", 12" (76, 114, 152, 191, 229,
267, 305). W – 1/4" (6)

Standard lengths are 24", 36", 48", 60" Model

and 72" (600, 900, 1200, 1500 and 1800). 48LL1
One-way
pattern
B
W + 4 3/4" (121)
LINEAR DIFFUSERS AND BAR GRILLES

Available Widths
Nominal
Duct inches 3 4 1/2 6 7 1/2 9 10 1/2 12
Width mm 76 114 152 191 229 267 305
W

Model 48LL2:
Available widths are 3", 6", 9", 12" (76,
152, 229, 305). NOMINAL DUCT SIZE W

Standard lengths are 24", 36", 48", 60" W – 1/4" (6)

and 72" (600, 900, 1200, 1500 and 1800). Model
48LL2
Two-way
pattern

W + 4 3/4" (121)

Available Widths
Nominal
Duct inches 3 6 9 12
Width mm 76 152 229 305
W

B50 Previous View Home Contents Dimensions Specification Performance

LINEAR LOUVER DIFFUSERS

HOW TO SPECIFY OR TO ORDER

(Show complete Model Number and Size, unless "Default" is desired).

Extruded Aluminum Linear Louver (Vane) Diffusers – Model Series 48LL

48LL2 - O - 48" x 6" - AW - N - MM - —

MODEL ACCESSORIES
- One-Way Pattern 48LL1 - None (default) —
- Two-Way Pattern 48LL2 - Directional Vanes DV

END CAP CONFIGURATION

DAMPER
- Mitered Mitered (default) MM
- No Damper (default) —
- Open Open OO
- Steel Damper O
- Mitered Open MO
- Aluminum Damper OA
(for 48LL2)

LENGTH (inches)
- Mitered Open MU B
(for 48LL1)

WIDTH
Model 48LL1
(inches) or

LINEAR DIFFUSERS AND BAR GRILLES

- 3", 4 1/2", 6", 7 1/2", 9", 10 1/2", 12"
(mm)
- 76, 114, 152, 191, 229, 267, 305
- Mitered Open MD
Model 48LL2 (for 48LL1)
(inches)
- 3", 6", 9", 12" or
(mm)
- 76, 152, 229, 305
FASTENING
- None (default) N
- Screw Holes A

FINISH
- Appliance White (default) AW
- Aluminum AL
Notes:
- Mill Finish MI
1. Currently only available in discrete lengths of up to 72" (1829).
2. Contact factory regarding availability of continuous lengths. - Special SP
3. Consult Dimensional Data page for available length dimensions.

SUGGESTED SPECIFICATION: Specification Text File

Furnish and install Nailor Model (select one) 48LL1 (one-way pattern) or 48LL2 (two-way pattern) Linear Louver (Vane)
Diffusers of the sizes and capacities as shown on the plans and air distribution schedules. The diffuser shall be manufactured
from extruded aluminum and incorporate fixed pattern discharge louvers for a horizontal throw pattern. The entire core
assembly shall be removable without the use of tools. The length shall be available in standard nominal lengths of 24", 36",
48", 60" and 72" (600, 900, 1200, 1500 and 1800 mm). The rectangular duct connection collar shall be an integral part of the
frame assembly and be not less that 1 1/2" (38) high. The finish is to be AW Appliance White baked enamel (optional finishes
are available).
(Optional) An opposed blade damper, constructed of heavy gauge corrosion-resistant steel (aluminum is optional) and operable
from the face of the diffuser, shall be provided on all units.
The manufacturer shall provide published performance data for the linear louver diffuser, which shall be tested in accordance
with ANSI/ASHRAE Standard 70 – 2006.

Previous View Home Contents Dimensions Specification Performance B51

 LINEAR LOUVER DIFFUSERS

Performance Data
Model: 48LL-1 • One-Way Pattern
Nominal Neck Velocity 300 400 500 600 700 800 900
Duct Width, Velocity Pressure .006 .010 .016 .022 .031 .040 .050
inches Total Pressure .037 .064 .101 .145 .197 .258 .326
CFM per ft. 75 100 125 150 175 200 225
3" NC — — 20 24 28 32 35
Throw 14-17-24 16-20-28 16-22-31 20-24-34 21-26-38 20-28-39 24-30-42
CFM per ft. 113 150 188 225 263 300 338
4 1/2" NC — 16 22 26 30 34 37
Throw 18-22-32 21-26-37 23-29-41 28-32-44 28-34-48 30-37-51 32-39-55
CFM per ft. 150 200 250 300 350 400 450
6" NC — 17 23 27 31 35 38
Throw 21-25-36 24-29-31 27-33-46 29-36-51 32-39-55 34-41-59 36-44-63
CFM per ft. 187 150 312 375 437 500 563
7 1/2" NC — 17 23 27 31 35 38
Throw 23-29-41 27-33-47 29-37-52 33-41-56 36-43-61 38-47-65 41-49-70
B CFM per ft. 225 300 375 450 525 600 675
9" NC — 18 24 28 32 36 39
Throw 25-31-44 30-36-52 33-40-58 35-45-63 39-48-67 42-52-73 45-56-77
CFM per ft. 263 350 438 525 613 700 788
10 1/2" NC — 18 25 28 33 37 40
LINEAR DIFFUSERS AND BAR GRILLES

Throw 27-34-48 32-39-60 34-43-61 39-48-66 42-50-72 48-55-76 48-58-82

CFM per ft. 300 400 500 600 700 800 900
12" NC — 19 25 29 33 37 40
Throw 29-36-51 34-42-59 37-46-65 42-51-71 45-54-77 48-59-82 51-62-88

Model 48LL-2 • Two-Way Pattern

Nominal Neck Velocity 300 400 500 600 700 800 900
Duct Width, Velocity Pressure .006 .010 .016 .022 .031 .040 .050
inches Total Pressure .037 .064 .101 ,145 .197 .258 .326
CFM per ft. 75 100 125 150 175 200 225
3" NC — 13 18 23 27 30 34
Throw 8-12-22 11-16-25 13-20-28 16-22-30 19-23-33 20-25-35 21-26-37
CFM per ft. 150 200 250 300 350 400 450
6" NC — 16 21 26 30 33 37
Throw 11-17-30 16-23-34 19-27-39 23-30-42 27-33-45 28-34-49 30-36-52
CFM per ft. 225 300 375 450 525 600 675
9" NC — 18 24 28 32 36 39
Throw 14-21-37 19-28-43 24-34-48 28-37-52 32-39-55 35-43-60 37-45-64
CFM per ft. 300 400 500 600 700 800 900
12" NC — 19 25 29 33 37 40
Throw 16-24-42 21-32-48 26-38-54 32-42-59 37-45-64 39-48-68 41-51-72

Throw Correction Factors for Various Lengths NC Correction Factors for Various Lengths
Length (ft.) 2 3 4 5 6 8 10 12 Length (ft.) 2 3 4 5 6 8 10
Throw Correction .70 .86 1.0 1.1 1.25 1.4 1.55 1.7 NC Correction -3 -1 0 +1 +2 +3 +5

Performance Notes: absorption of 10 dB, re 10 -12 watts. For other lengths,

1. All pressures are in inches w.g. use the correction factor table. Dash (—) in space
denotes an NC value less than 15.
2. Horizontal throws are given at 150, 100 and 50 fpm
terminal velocities under isothermal conditions. 5. When used as a return intake, the NC value is increased
by 4 and the negative static pressure is TP x 0.8.
3. Throw values are based on a 4 ft. section. For other
lengths, use the correction factor table above. 6. Data derived from tests conducted in accordance
with ANSI/ASHRAE Standard 70 – 2006.
4. NC values are based on a 4 ft. section and a room

B52 Previous View Home Contents Dimensions Specification Performance