Scribd Logo
Upload

Welcome to Scribd!

  • 336 views

    Tribomet Wear Coatings

    Uploaded by

    Raghunath Nagaraj
    Tribomet Wear Coatings

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Tribomet Wear Coatings

    Uploaded by

    Raghunath Nagaraj
    336 views1 page
    Tribomet Wear Coatings

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Tribomet Wear Coatings

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    336 views1 page

    Tribomet Wear Coatings

    Uploaded by

    Raghunath Nagaraj
    Tribomet Wear Coatings

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Tribomet Wear Control Coatings

    Tribomet® coatings are electro- Advantages Coating to Size


    deposited composites that are • Provides excellent resistance to Tribomet wear control coatings
    applied by a patented process. fretting and abrasive wear can be used as plated or ground to
    The coatings are produced when • Suited for coating non-line-of- finished dimensions. Typical as-
    particles, which are kept in sight faces and internal bores plated finish of 1-2µmRa; Ra can
    suspension within an electroplating be further improved via grinding,
    bath, settle onto the component and • Excellent adhesion >30,000 psi lapping, vibro finishing, or honing.
    are fixed by the depositing metal • Operating temperatures up to
    (see Figure 1). 900oC for Tribomet T104CS Coating Characteristics
    Tribomet T104C – Carbide content
    Tribomet wear-resistant coatings • Pre-oxidation heat treatment will 12-28 wt%; nomimal hardness
    can operate at elevated temperatures further improve wear resistance
    for applications operating
    300 HV; maximum operating
    and are produced from electroplated temperature 700oC; typical coating
    below 300oC
    cobalt (in various amounts) and fine thickness 0.08 mm-0.130 mm after
    particles of chromium carbide (see • 100% dense coating final machining
    Figure 2). The coating forms an
    adherent oxide that readily forms a • Suitable for low- or high- volume Tribomet T104CS – Carbide
    manufacture for both OEM and
    glaze on sliding contact to prevent repair content 30-40 wt%; nomimal
    adhesive wear. The higher-carbide- hardness 450 HV; maximum
    composite Tribomet T104CS can • No component distortion operating temperature 900oC; typical
    be used in heat-treated form with coating thickness 0.08 mm-0.130
    increased hardness, corrosion • Can be coated to size or ground mm as plated
    resistance, and hammer wear • Applicable to most metallic
    resistance. Tribomet T104CS is also Tribomet T104CS heat treated –
    substrates and for contact with
    an excellent replacement for hard titanium alloys Carbide content 30-40 wt%;
    chrome and other galvanic coatings. nomimal hardness 700-800 HV;
    • Excellent replacement for maximum operating temperature
    hard chrome and other galvanic 900oC; typical coating thickness
    coatings
    0.08 mm-0.130 mm as plated
    Applications
    Typical applications include
    aviation, automotive, power
    generation, and general engineering.

    Base Materials
    Tribomet coatings can be applied
    to aluminum, steel, and cobalt- and
    nickel-based alloys. Components
    can be cast, forged, rolled, or
    Figure 1. Schematic showing formation extruded. Figure 2. Tribomet T104CS coating
    of Tribomet composite coating microstructure

    Praxair Surface Technologies, Inc. © Copyright 2010 Praxair Technology, Inc. Printed in the United States of America
    1500 Polco Street All rights reserved 07-2010
    Indianapolis, IN 46222
    Praxair. the Flowing Airstream design, and Printed on recycled paper
    www.praxairsurfacetechnologies.com Tribomet are trademarks of Praxair Technology, P-10356
    [email protected] Inc. in the United States and/or other countries.

    Telephone: The information contained herein is offered for


    +1 317 240 2500 use by technically qualified personnel at their
    Fax: discretion and risk without warranty of any kind.
    +1 317 240 2255

    You might also like