0% found this document useful (0 votes)
263 views2 pages

MikroTik Installation Guide

The RB3011UiAS-RM is a new multi-port router board with a 1.4GHz dual-core ARM CPU, 1GB RAM, and 10 Gigabit Ethernet ports. It has an SFP port, USB 3.0 port, touchscreen display, and provides PoE output. Performance tests showed maximum throughputs between 1.5-4Gbps for various packet sizes under different routing and filtering configurations.

Uploaded by

Arslan Awan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
263 views2 pages

MikroTik Installation Guide

The RB3011UiAS-RM is a new multi-port router board with a 1.4GHz dual-core ARM CPU, 1GB RAM, and 10 Gigabit Ethernet ports. It has an SFP port, USB 3.0 port, touchscreen display, and provides PoE output. Performance tests showed maximum throughputs between 1.5-4Gbps for various packet sizes under different routing and filtering configurations.

Uploaded by

Arslan Awan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

RB3011UiAS-RM

RB3011UiAS-RM
The RB3011 is a new multi port device, our first to be running an ARM architecture CPU for higher
performance than ever before. The RB3011 has ten Gigabit ports divided in two switch groups, an
SFP cage and for the first time a Superspeed full size USB 3.0 port, for adding storage or an external
3G/4G modem.

Unit comes with 1U rackmount enclosure, a touchscreen LCD panel, a serial console port and
PoE output functionality on the last Ethernet port.

Specifications
Product code RB3011UiAS-RM

CPU nominal frequency 1.4 GHz

CPU core count 2

Size of RAM 1 GB

10/100/1000 Ethernet ports 10

Switch chip model QCA8337-AL3C-R

Power Jack 1

PoE in Yes (passive only)

PoE out Yes (port 10)

Supported input voltage 10 V - 30 V

Voltage Monitor Yes

PCB temperature monitor Yes

Dimensions 443x92x44mm

License level 5

Operating System RouterOS

CPU IPQ-8064

Max Power consumption 10 W

RB3011UiAS-RM 1
RB3011UiAS-RM

Specifications Included
SFP port 1

USB slot type USB 3.0 type A

Number of USB ports 1

Serial port RJ45

Suggested price $179

24V 1.2A Power


adapter

Performance test results


RB3011UiAS All port test RouterOS v6.30rc23

1518 byte 512 byte 64 byte


Mode Configuration
Mbps kpps Mbps kpps Mbps kpps

Bridging none (fast path) 3,946.8 325.0 3,849.4 939.8 783.5 1,530.2

Bridging 25 bridge filter rules 3,946.8 325.0 1,573.7 384.2 178.5 348.6

Routing none (fast path) 3,946.8 325.0 3,849.4 939.8 736.1 1,437.6

Routing 25 simple queues 3,946.8 325.0 1,718.7 419.6 214.9 419.7

Routing 25 ip filter rules 2,453.1 202.0 836.0 204.1 96.5 188.4

1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was
maxed out
4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different
configurations most likely will result in lower results

RB3011UiAS-RM 2

You might also like