Microsoft Toolkit Functions

Main Tab:

Office Information: This states if Microsoft Office is installed and supported on your PC and whether it is
32 bit (x86), 64 bit (x64) or 32 bit running on 64 bit OS (x86-64). It will also tell you the Product Edition
and Version Number.

Windows Information: This states if Microsoft Windows is installed and supported on your PC and
whether it is 32 bit (x86), 64 bit (x64) or 32 bit running on 64 bit OS (x86-64). It will also tell you the
Product Edition and Version Number.

Uninstall Office: Run a script that will uninstall Microsoft Office if you can't manually remove it.
Microsoft Office 2003 and later is supported.

Activation Tab:

EZ-Activator: This is a simple setup for KMS Activation. Unlike previous versions, it CANNOT use KMS
activation if you are using Retail License. EZ-Activator gathers information about your licensing status to
provide the best method of activation. It can automatically attempt possible fixes in case of activation
failure, and can reverse all changes in case of total failure.

It automatically installs all KMS Keys for your system, attempts activation for only KMS Licenses, and if
successful, installs AutoKMS automatically.

AutoKMS: AutoKMS is a scheduled task that will renew your 180 day KMS activation. Unlike other KMS
activators, AutoKMS does not run 24/7 or only at the last minute with the hope it won't fail, and leaves
no traces of itself other than a scheduled task, log, and exe file. It only attempts to activate KMS licenses
(which saves a lot of time if you have non-KMS licenses such as MAK or Retail active). It will run at
startup, at login, and then every 24 hours and attempt KMS activation (the task schedule cannot be
changed). The Install/Uninstall buttons are used to install or remove AutoKMS.

AutoKMS Custom Task: Replace the default AutoKMS Scheduled task with a custom one that won't be
reset. You can customize the triggers the way you want in Task Scheduler.

AutoRearm: AutoRearm is a scheduled task that will allow you to use Microsoft Office in grace period
forever (It is a trial reset not an activator). It requires that you have at least 1 available rearm upon
install. It works by taking a backup of your activation and restoring it when you run out of rearms. It runs
on startup and then every 24 hours, and checks how many days left you have on your grace period (the
task schedule cannot be changed). It will rearm if you have 5 or fewer days before your grace period
expires. If the rearm fails because the count ran out (which is normal and inevitable), it restores the
backup, which puts the count where it was upon install of AutoRearm. Because this grace period is likely
expired, it then rearms (which is why at least 1 rearm is required). The backup will be restored upon
uninstall reverting your PC to whatever state it would be in when you installed AutoRearm (though
grace may be expired). AutoRearm cannot be installed alongside timesurfer’s IORRT (which does the
same thing as AutoRearm).

NOTE: Retail Microsoft Office nags you for activation on startup, so don't use Retail. You can stop this by
using Volume Edition and using KMS Product Key.

KMS Server Service: Install KMSEmulator as a Windows Service that constantly runs and starts
automatically, for turning your PC into a KMS Server that can activate other clients over the network.

NOTE: This service is written in C++, not C#\.NET. You will want to AV and Firewall exclude this service to
activate other clients.

NOTE: Some Operating Systems (Microsoft Windows 8.1/Server 2012 R2, and Microsoft Office 2013 on
these OS) block LocalHost KMS Activation. If you want to use KMS Server Service to activate your own
PC, you can install AutoKMS alongside KMS Server Service and use a LocalHost Bypass method.

Attempt Activation (Activate): This will attempt to activate any and all Microsoft Office or Windows
products (depending on the Toolkit Mode). Online and KMS Activation will be performed.

Attempt Activation (Phone): This will attempt to activate any and all Microsoft Office or Windows
products (depending on the Toolkit Mode), that can be Phone Activated and aren't already activated.
The Phone Activation will require you to enter a Confirmation ID which you get by calling Microsoft, but
it will save it for later use.

Check Activation Status (Check): This will display detailed information on Microsoft Office or Windows
activation (depending on the Toolkit Mode), including how many days you are licensed for, what
Product Key and type of license you are using, and much more.

Rearm: This resets the 30 day grace period that all Microsoft Office or Windows products (depending on
the Toolkit Mode) have. Rearm count is limited so check the rearm count. Not all products provide a
grace period, and a rearm does not activate your product.

Get Rearm Count (Available): The available button will tell you how many rearms you have available.
Product Keys Tab:

Install: This will install a Product Key, using either a provided Product Key based upon your selection or a
custom Product Key that you enter. A Product Key cannot be installed unless you have that License
installed.

Uninstall: This will remove a Product Key, either removing the Product Key based upon your selection or
a custom Product Key that you enter.

Check: This will give information on a Product Key, using either a provided Product Key based upon your
selection or a custom Product Key that you enter. This information is what you would get from a PIDX
checker.

Check Key List: Check multiple Product Keys obtained using a form that can read the clipboard and any
files you choose. All Product Keys are found using Regular Expressions from these sources and are
stored. When you are done, all these Product Keys will be checked.

Check System: Read the Product Keys found in the Registry and MSDM Table for Microsoft Office or
Windows products (depending on the Toolkit Mode), and perform a check on it. NOTE: Product Keys
may not exist, be obscured, or not actually be installed.

Show System: Read the Product Keys found in the Registry and MSDM Table for Microsoft Office or
Windows products (depending on the Toolkit Mode), and display it. NOTE: Product Keys may not exist,
be obscured, or not actually be installed.

License Backup Tab:

Backup: This saves your licensing information for Microsoft Office or Windows products (depending on
the Toolkit Mode) so it can be restored later. This information is machine specific, so it won't work on
different hardware. It saves the current state but does not stop the clock, so a 25 day old backup
restored will be whatever days you had minus 25 when you took the backup, if you are using KMS or
Trial licensing. Backups are stored in subdirectories of the "Backups" folder, named after the Product
shown in the Main Tab. The "Backups" folder will be created in the same directory as the Microsoft
Toolkit executable using the name you entered, so be sure you aren't running Microsoft Toolkit from a
read only directory.
Restore: Restores all of the information saved in a previous backup. It will take a temporary backup of
your current state, delete your current state, and then restore the backup. If it fails to restore it will try
to restore the temporary backup. This requires that you disable your internet connection to prevent
using up an activation before the Restore completes.

Check Key List: Checks all keys in Keys.ini for the backup you specify.

Restore Keys: Tries to reinstall saved Product Keys of a backup, but does not change or restore licensing.
Good if you backed up a MAK that has an installable key but you want to Phone Activate.

Customize Setup Tab:

Set Installer Path: Opens window so you can browse to the setup.exe for your Microsoft Office installer.
You must have previously extracted the Microsoft Office Installer somewhere (ISO files and self-
extracting exe files not supported, you must extract yourself). If the installer is both 32 and 64 bit (has a
setup.exe and x86 and x64 folders), browse inside one of those folders for setup.exe, convert that, then
repeat for the other folder.

Extract Setup: If your Microsoft Office installer is in ISO or Microsoft SFX EXE form, browse to it and
choose a place to extract it, then the path to setup.exe will be determined.

Make ISO: Browse to setup.exe, and that folder will be added to an ISO. If you have a Dual-Architecture
installer (32 and 64 bit), choosing the setup.exe alongside the x64/x86 folder(s) adds everything to the
ISO. Entering x86 folder and choosing setup.exe creates an x86 only ISO, and vice versa for the x64
folder.

Run OCT: This runs Microsoft’s Office Customization Tool, which allows you to create MSP files that
automate and customize Microsoft Office setup. This is a powerful deployment tool but only works on
Volume editions. You create a MSP file for a product then put that MSP file in the Updates folder. This
requires you have the Admin folder on the installer as well, so if you change a Retail installer to Volume,
the Admin folder is added so you can use OCT.

Change Channel: The product determined by your selection in the combo boxes will have its licensing
channel changed. If the product is Retail, it will become Volume. If the product is Volume, it will become
Retail. Press Change Channel for each selection that you want to change the licensing channel for. This
will also add the Admin folder to your installer which allows you to use the Office Customization Tool.
Add Updates: Browse to downloaded updates for Microsoft Office and they will be integrated into the
disc. Any MSP files, or any EXE updates following Microsoft’s normal command-line parameters can be
integrated. This means you should be able to integrate Service Packs as well.

Add Languages: Browse to language packs for Microsoft Office and integrate them into the Microsoft
Office installer. When you run Microsoft Office setup, you will be able to use these languages if more
than one language is in the Microsoft Office installer; otherwise the only language in the installer is
used.

Remove Language: If multiple languages are in the Microsoft Office installer, you can choose one to
remove. You cannot remove a language if it’s the only one in the Microsoft Office installer.