MSDS Hydrex 7930

Product Name: Hydrex 7930
MSDS Code: HYS7930
MATERIAL SAFETY DATA SHEET
1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Product Application: Low foaming surfactant
Manufacturer: Veolia Water Solutions & Technologies, Saudi – Chemical Industries

P.O. BOX 58515, Riyadh 11515, Kingdom of Saudi Arabia
Telephone: 01 478 77 21. Fax: 01 478 25 60
www.veoliawaterst.com
Emergency Telephone Number:

Riyadh - KSA 01 478 77 21
2 – COMPOSITION INFORMATION ON INGREDIENTS
Chemical Name CAS No. EC No. %

Surfactant - - 7 - 15
3 – HAZARDS IDENTIFICATION
Potential Health Effects:

Very toxic to aquatic organisms.
4 – FIRST AID MEASURES
As a general rule, in case of doubt or if symptoms persist, always call a doctor. NEVER induce swallowing in an unconscious
person.
If in eyes: Immediately flush eye(s) with plenty of water. If eye irritation persists, consult a specialist.
If on skin: If skin irritation appears or persists, call a physician. Wash with water and soap as a precaution.
If inhaled: Move subject to fresh air. Give artificial respiration if breathing has stopped.
If swallowed: Do not induce vomiting without medical advice. Immediately give large quantities of water to drink. Never
give anything by mouth to an unconscious person.
5 – FIRE- FIGHTING MEASURES
Flash Point: Non flammable.

Extinguishing Media: Water spray, foam, dry chemical, or carbon dioxide.
Fire & Explosion Procedures: Move container from fire area if it can be done without risk. Cool containers exposed to
flames with water until well after the fire is out. Keep run-off water out of sewers and
water sources. Do not breath fumes. Dike for water control.
6 – ACCIDENTAL RELEASE MEASURES
Personal Precautions: Use personal protection recommended in section 8.

Environmental Precautions: Contain and control the leaks or spills with non-combustible absorbent materials such as
sand, earth, vermiculite, diatom earth in drums for waste disposal.
Prevent any material from entering drains or waterways. If the product contaminates
waterways, rivers or drains, alert the relevant authorities in accordance with statutory
procedures.
Spill Clean up Methods: Contain large spills with dikes and transfer the material to appropriate containers for
reclamation or disposal. Absorb remaining material or small spills with an inert material and
Revision No.: 00
Revision Date: 21-11-2011 Page 1 of 3
MSDS Code: HYS7930
then place in a chemical waste container. Flush spill area with water.
7 – HANDLING AND STORAGE
Handling:
Observe precautions stated on label and also industrial safety regulations. Avoid contact of product with the skin and eyes.
Smoking, eating and drinking are prohibited in premises where the preparation is used.
Emptied containers retain vapour and product residue. Observe all recommended safety precautions until container is cleaned,
reconditioned or destroyed. The reuse of this material's container for non industrial purposes is prohibited and any reuse must
be in consideration of the data provided in this material safety data sheet.
Storage:
Keep the container tightly closed in a dry place.
8 – EXPOSURE CONTROLS/PERSONAL PROTECTION
Protective Equipment:
Eye Protection: Wear safety goggles. Provide eye washes in workshops where the product is constantly handled.
Hand protection: Protective gloves must be worn.
Respiratory Protection: Use approved respiratory protection equipment when airborne exposure is excessive. Consult the
respirator manufacturer to determine the appropriate type of equipment for a given application.
The respirator use limitations specified by the manufacturer must be observed.
Ventilation: Provide natural or mechanical ventilation to minimize exposure.
If practical, use local mechanical exhaust ventilation at sources of air contamination such as
processing equipment.
9 – PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Clear
State : Liquid
Color : Pale to yellow
Odor Characteristic : NA
pH of (10% solution) : 11.2 – 13.5
o
Specific Gravity @ 25 C : Approx 1.04
Viscosity, cps : NA
Melting Point, (Deg. Celsius) : NA
Boiling Point, (Deg. Celsius) : > 100
Percentage Volatility, (%) : NA
Solubility in Water : Complete
10 – STABILITY AND REACTIVITY
Stability: This material is considered stable under specified conditions of storages.

Conditions to avoid: None known
Material to avoid: Strong acids. Strong bases. Strong oxidizers. Strong reducing
agents. Halogenated hydrocarbons.
Hazardous decomposition products: Stable under normal conditions.
11 – TOXICOLOGICAL INFORMATION
Acute Toxicity
Ingestion: LD50, Rat, male: 2,500 mg/kg
Skin Absorption: Estimated LD50, Rabbit: > 2,000 mg/kg
Inhalation: LC50, 1 h, Vapor, Rat: > 7.1 mg/l
12 – ECOLOGICAL INFORMATION
Revision No.: 00
MSDS Code: HYS7930
ECOTOXICITY
Material is moderately toxic to aquatic organisms on an acute basis (LC50/EC50 between 1 and 10 mg/L in most sensitive
species tested).
Aquatic Invertebrate Acute Toxicity: EC50, water flea Daphnia magna, immobilization: 6.3 mg/l
Toxicity to Micro-organisms: EC50; bacteria, Growth inhibition (cell density reduction), 16 h: 4,900 mg/l
13 – DISPOSAL CONSIDERATIONS
Waste Management:
Do not pour into drains or waterways.
Disposal Methods:
Local, state, provincial, and national disposal regulations may be more or less stringent. Consult your attorney or appropriate
regulatory officials for information on such disposal. This product should not be dumped, spilled, rinsed or washed into sewers
or public waterways.
14 – TRANSPORT INFORMATION
UN Number: 1760
Proper Shipping Name: Corrosive liquid, n.o.s.
IMDG Class: 8
Packing Group: III
15 – REGULATORY INFORMATION
This preparation was classified in compliance with the directive known as <All preparations> 1999/45/EC and its adaptations
In addition directive 2004/73/EC with the 29° adaptation of directive 67/548/EEC (Hazardous substances) have been taken into
account.
Particular hazards associated with the risk and safety recommendations:
R20/22 Harmful by inhalation and if swallowed.
S61 Avoid release to the environment. Refer to special instructions/safety data sheets.
Product Label (s):
16 – OTHER INFORMATION
HMIS Rating NFPA 704 Rating

Flammability
HEALTH 2
FLAMMABILITY 0 0
PHYSICAL HAZARD 0
PERSONAL PROTECTION B
Health 2 0 Instability
HMIS: Hazardous Materials Identification System

NFPA: National Fire Protection Association
Since the user's working conditions are not known by us, the information supplied on this safety data sheet is based on our current level of
knowledge and on national and community regulations.
The product must not be used for any purposes other than those specified under heading 1 without first obtaining written handling
instructions.
It is at all times the responsibility of the user to take all necessary measures to comply with legal requirements and local regulations.
The information given on this safety data sheet must be regarded as a description of the safety requirements relating to our product and not
a guarantee of its properties.
Revision No.: 00

MSDS Hydrex 7930

Uploaded by

Copyright:

Available Formats

MSDS Hydrex 7930

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MSDS Hydrex 7930

Uploaded by

Copyright:

Available Formats

Product Name: Hydrex 7930

MSDS Code: HYS7930

MATERIAL SAFETY DATA SHEET

1 – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Product Name: Hydrex 7930

Manufacturer: Veolia Water Solutions & Technologies, Saudi – Chemical Industries

Emergency Telephone Number:

2 – COMPOSITION INFORMATION ON INGREDIENTS

Chemical Name CAS No. EC No. %

Potential Health Effects:

4 – FIRST AID MEASURES

5 – FIRE- FIGHTING MEASURES

Flash Point: Non flammable.

6 – ACCIDENTAL RELEASE MEASURES

Personal Precautions: Use personal protection recommended in section 8.

7 – HANDLING AND STORAGE

8 – EXPOSURE CONTROLS/PERSONAL PROTECTION

9 – PHYSICAL AND CHEMICAL PROPERTIES

10 – STABILITY AND REACTIVITY

Stability: This material is considered stable under specified conditions of storages.

Product Label (s):

HMIS Rating NFPA 704 Rating

HMIS: Hazardous Materials Identification System

You might also like