The document provides requirements and design data for a structural design project of a 4-story office building using steel components. It specifies that the design report should include: brief descriptions of the project; analysis and design of beams, columns, and connections; analysis and design of the roof truss; a lateral stability system proposal; and AutoCad drawings. It also provides information on the steel grades, connection types, floor system, and a proposed floor layout with beam sizes to guide the design.
The document provides requirements and design data for a structural design project of a 4-story office building using steel components. It specifies that the design report should include: brief descriptions of the project; analysis and design of beams, columns, and connections; analysis and design of the roof truss; a lateral stability system proposal; and AutoCad drawings. It also provides information on the steel grades, connection types, floor system, and a proposed floor layout with beam sizes to guide the design.
The document provides requirements and design data for a structural design project of a 4-story office building using steel components. It specifies that the design report should include: brief descriptions of the project; analysis and design of beams, columns, and connections; analysis and design of the roof truss; a lateral stability system proposal; and AutoCad drawings. It also provides information on the steel grades, connection types, floor system, and a proposed floor layout with beam sizes to guide the design.
The document provides requirements and design data for a structural design project of a 4-story office building using steel components. It specifies that the design report should include: brief descriptions of the project; analysis and design of beams, columns, and connections; analysis and design of the roof truss; a lateral stability system proposal; and AutoCad drawings. It also provides information on the steel grades, connection types, floor system, and a proposed floor layout with beam sizes to guide the design.
FAKULTI KEJURUTERAAN AWAM, UNIVERSITI TEKNOLOGI MALAYSIA SESI/SEMESTER 1213-2, ALOR SETAR Pensyarah: Prof. Madya Dr. Ahmad Baharuddin Abd Rahman, 013-7305127, [email protected]
DESIGN CODE: Eurocode 3, BS EN 1993: Part 1-1 Eurocode 3 BS EN 19933 Part 1-8 for the joint
THE PROPOSED PROJECT
A 4-storey office building is to be designed using steel components. Based on the layout drawings, you are required to provide a complete structural design of the building. The design report should cover: 1. Brief descriptions of the proposed project explaining the introduction, the function of the building, types of flooring, material properties of the steel, loadings considered in the design, types of connection used and types of lateral stability system provided 2. Analysis and design of beams, columns and connections 3. Analysis and design of roof truss 4. Design proposal for the lateral stability system against lateral forces 5. AutoCad drawings for the floor layout, building profile, beams, columns, connections and roof trusses.
The design project must be based on Simple Design Method that leads to Simple Construction. The dimensions of the floor layout and steel section sizes given in the drawing can be used as a guide and you may change the section sizes to suit your design proposal. Page 2/4
DESIGN DATA
STEEL GRADE Steel Grade S275 for beams Steel grade S275 for columns Black bolt grade 8.8
FUNCTION OF BUILDING Office building
CONNECTION TYPE Pinned connection between beam-to-column Pinned connection between secondary beam-to-main beam
CONSTRUCTION TYPE Simple construction
STABILITY SYSTEM Core wall or Steel bracing system
FLOOR SYSTEM Hollow core slab with cast in-situ concrete topping Page 3/4
Floor system consists of hollow core slab, steel mesh and 65mm concrete topping. The shear studs and cast-in-situ concrete topping provide full lateral restraint along the beam span. Except some beams near atrium may not have enough lateral restaint and need to be designed as unrestrained. Page 4/4
