Scribd
Upload
925 views12 pages

Start - RokDoc

This document provides instructions for loading and displaying well data in RokDoc, including: 1. Loading LAS files, checkshot data, deviation surveys, and markers for a well. 2. Creating volume fraction and saturation sets by adding appropriate logs, assigning minerals or saturations, and creating complement logs. 3. Displaying the loaded well data, including logs, in the well viewer along with the created volume fraction and saturation sets.

Uploaded by

diditkusuma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
925 views12 pages

Start - RokDoc

This document provides instructions for loading and displaying well data in RokDoc, including: 1. Loading LAS files, checkshot data, deviation surveys, and markers for a well. 2. Creating volume fraction and saturation sets by adding appropriate logs, assigning minerals or saturations, and creating complement logs. 3. Displaying the loaded well data, including logs, in the well viewer along with the created volume fraction and saturation sets.

Uploaded by

diditkusuma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

OPTIMISE SUCCESS THROUGH SCIENCE

Start RokDoc
Create new project

In RokDoc Project Viewer > File > New > locate the project

Its recommended to save the project in local drive

Set Seismic Reference Datum > OK


Loading LAS
Add Files

Make sure these box filled


correctly

1. Well Management > Read LAS Files

Tick to choose the logs


Import…
Loading Checkshot
2

3. Highlight the well. 5. Locate the file

6. Modify
these inputs

4. Read..
8.OK

7. Read..
1. Right click on Checkshot > Edit
Loading Deviation
2

3. Highlight the well. 5. Locate the file

1 6. Define
these inputs

1. Right click Position Sets under


the well > Edit

4. Read ascii or xls file.. *


8.OK

7. Read..
* then select whether the format in MD-TVD or MD-Dip-Azi
Loading Markers

3. Locate the file

1
4. Modify
2 these inputs

6.OK

5. Read

1. Right click on Markers > Edit Markers


Display The Well

Right click Well A > Display Well A

Double click the well symbol


or
Well Viewer

Drag and drop the log on track to display


Drag and drop the folder to track to create a new track
Volume Fraction Set

Mixing type. Click to edit

2. Create New…
4. Highlight the volume log, Vsh

3. Add Volume Log

7. Create Complement Log > Select Quartz

1. Volume Fraction Sets > Edit

5. OK

6. Assigned the associated mineral, Shale > OK


Create Saturation Set

Mixing type: Wood, Brie


click to edit

2. Create New…

3. Highlight Saturation (e.g water) > Add Saturation Log 4. Highlight the saturation log, e.g. Sw

1
1. Right click
Saturation Sets >
Edit

6. Highlight other saturation > Add Saturation or Create


Complement Log

5. OK

7. OK
Saturation Set
2. Create New…

3. Highlight Water Satur… > Add Saturation Log 4. Highlight the saturation log, Sw

6. Choose Oil or Gas Satur… > Create Complement Log

5. OK

7. OK
Display Volume and Saturation Set

Drag and drop

You might also like