Stall Speed Calculator

Download as xlsx, pdf, or txt
Download as xlsx, pdf, or txt
You are on page 1of 2

Stall Speed Calculator

Enter data in the blue cells on


VS = √ 2 x M x nz/ρ x S x CL stall speeds VS1 and VS0 will be
bottom right.
Where:
Note: This calculator ignores
Aircraft weight W = 55 kg tailplane down force and ass
Acceleration due to gravity = 9.81 m/s² elevator authority to reach th
Aircraft's mass M = 539.55 N

Angle of bank = 5 degrees


Load factor due to turning flight nz = 1.00 (1/COS Θ angle of bank)

Sea level air density ρ = 1.225 kg/m³

Wing area S = 1.39 m²


1g wing loading = 39.57 kg/m²
Turning flight (factored) wing loading = 39.72 kg/m²

Wing section's maximum coefficient of lift CLMAX = 1.2 * * Based on an infinate span win

Flaps down section's CLMAX = 1.8 *


Flap span = 4 % of wing span
Estimated CLMAX for flapped wing = 1.28 *

Aspect ratio reduction factor = 0.89 (Typically 0.89 for aspect ratios of between 6 and

Estimated Total Aeroplane CLMAX with flaps up = 0.00 Estimated VS1 =

Estimated Total Aeroplane CLMAX with flaps down = 1.14 Estimated VS0 =

Δ CLMAX = 1.14 due to flaps


nter data in the blue cells only. The estimated
tall speeds VS1 and VS0 will be displayed at the
ottom right.

Note: This calculator ignores fuselage lift and


ailplane down force and assumes sufficient
levator authority to reach the stall.

ased on an infinate span wing with no tip losses.

pect ratios of between 6 and 8)

#DIV/0! m/s = #DIV/0! kts

23.594 m/s = 45.9 kts

You might also like